: Add StorCenter port to arch/powerpc
cover : Add StorCenter port to arch/powerpc
Guys,
I have the bulk of a port for the iomega StorCenter that Andy and I have been working on. We'd like your feedback!
Specifically, it's not quite working yet, and for lack of actually getting serial output, we're having some difficulty still. I post it here in a desperate attempt to let some eagle-eyed person point out my obvious "D'oh" problem.
Thanks,
jdl
arch/powerpc/boot/Makefile | 3 +- arch/powerpc/boot/cuboot-824x.c | 52 + arch/powerpc/boot/dts/storcenter.dts | 159 +++ arch/powerpc/configs/storcenter_defconfig | 1538 +++++++++++++++++++++++ arch/powerpc/platforms/embedded6xx/Kconfig | 15 +- arch/powerpc/platforms/embedded6xx/Makefile | 2 + arch/powerpc/platforms/embedded6xx/storcenter.c | 158 +++ 7 files changed, 1924 insertions(+), 3 deletions(-)
Quoted 4 lines · Jon Loeliger
Specifically, it's not quite working yet, and for lack of actually getting serial output, we're having some difficulty still. I post it here in a desperate attempt to let some eagle-eyed person point out my obvious "D'oh" problem.
Can you access __log_buf in any way at all?
g.
Signature · 4 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. [email protected] (403) 399-0195
So, like, the other day "Grant Likely" mumbled:
Quoted 7 lines · Jon Loeliger
Quoted 4 lines
Specifically, it's not quite working yet, and for lack of actually getting serial output, we're having some difficulty still. I post it here in a desperate attempt to let some eagle-eyed person point out my obvious "D'oh" problem.
Can you access
__log_bufin any way at all?
Not that we've established yet...
jdl