ASoC: sgtl5000: Place optional properties in the correct section
Subsystems (2)
PATCH 1/1 ASoC: sgtl5000: Place optional properties in the correct section
From: Fabio Estevam <[email protected]>
'micbias-resistor-k-ohms' and 'micbias-voltage-m-volts' are optional properties, so move them below the 'Optional properties' line.
While at it, fix a typo in 'mentioned'.
--- Documentation/devicetree/bindings/sound/sgtl5000.txt | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
Documentation/devicetree/bindings/sound/sgtl5000.txt +9 -9
@@ -7,6 +7,14 @@ Required properties: - clocks : the clock provider of SYS_MCLK +- VDDA-supply : the regulator provider of VDDA + +- VDDIO-supply: the regulator provider of VDDIO + +Optional properties: + +- VDDD-supply : the regulator provider of VDDD + - micbias-resistor-k-ohms : the bias resistor to be used in kOmhs The resistor can take values of 2k, 4k or 8k. If set to 0 it will be off.
@@ -15,17 +23,9 @@ Required properties: - micbias-voltage-m-volts : the bias voltage to be used in mVolts The voltage can take values from 1.25V to 3V by 250mV steps - If this node is not mentionned or the value is unknown, then + If this node is not mentioned or the value is unknown, then the value is set to 1.25V. -- VDDA-supply : the regulator provider of VDDA - -- VDDIO-supply: the regulator provider of VDDIO - -Optional properties: - -- VDDD-supply : the regulator provider of VDDD - Example: codec: sgtl5000@0a {
Signature · 1 line
1.9.1
Mark Brown
maintainerApplied "ASoC: sgtl5000: Place optional properties in the correct section" to the asoc tree
The patch
ASoC: sgtl5000: Place optional properties in the correct section
has been applied to the asoc tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
10ff08029d9880e4bf70de0535f34ce239af7a9aMon Sep 17 00:00:00 2001
From: Fabio Estevam <[email protected]>
Date: Tue, 31 May 2016 17:41:50 -0300
Subject: [PATCH] ASoC: sgtl5000: Place optional properties in the correct
section
'micbias-resistor-k-ohms' and 'micbias-voltage-m-volts' are optional properties, so move them below the 'Optional properties' line.
While at it, fix a typo in 'mentioned'.
--- Documentation/devicetree/bindings/sound/sgtl5000.txt | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
Documentation/devicetree/bindings/sound/sgtl5000.txt +9 -9
@@ -7,6 +7,14 @@ Required properties: - clocks : the clock provider of SYS_MCLK +- VDDA-supply : the regulator provider of VDDA + +- VDDIO-supply: the regulator provider of VDDIO + +Optional properties: + +- VDDD-supply : the regulator provider of VDDD + - micbias-resistor-k-ohms : the bias resistor to be used in kOmhs The resistor can take values of 2k, 4k or 8k. If set to 0 it will be off.
@@ -15,17 +23,9 @@ Required properties: - micbias-voltage-m-volts : the bias voltage to be used in mVolts The voltage can take values from 1.25V to 3V by 250mV steps - If this node is not mentionned or the value is unknown, then + If this node is not mentioned or the value is unknown, then the value is set to 1.25V. -- VDDA-supply : the regulator provider of VDDA - -- VDDIO-supply: the regulator provider of VDDIO - -Optional properties: - -- VDDD-supply : the regulator provider of VDDD - Example: codec: sgtl5000@0a {
Signature · 1 line
2.8.1