Skip to contentSkip to conversation

ASoC: sgtl5000: Place optional properties in the correct section

PATCH In review Fabio Estevam 2 participants 2 messages May 31, 2016 – Jun 2, 2016

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ASoC: sgtl5000: Place optional properties in the correct section

From: Fabio Estevam <[email protected]>

'micbias-resistor-k-ohms' and 'micbias-voltage-m-volts' are optional properties, so move them below the 'Optional properties' line.

While at it, fix a typo in 'mentioned'.

---
 Documentation/devicetree/bindings/sound/sgtl5000.txt | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
Documentation/devicetree/bindings/sound/sgtl5000.txt +9 -9
index 0e5e4eb..5666da7 100644
@@ -7,6 +7,14 @@ Required properties:
 
 - clocks : the clock provider of SYS_MCLK
 
+- VDDA-supply : the regulator provider of VDDA
+
+- VDDIO-supply: the regulator provider of VDDIO
+
+Optional properties:
+
+- VDDD-supply : the regulator provider of VDDD
+
 - micbias-resistor-k-ohms : the bias resistor to be used in kOmhs
 	The resistor can take values of 2k, 4k or 8k.
 	If set to 0 it will be off.
@@ -15,17 +23,9 @@ Required properties:
 
 - micbias-voltage-m-volts : the bias voltage to be used in mVolts
 	The voltage can take values from 1.25V to 3V by 250mV steps
-	If this node is not mentionned or the value is unknown, then
+	If this node is not mentioned or the value is unknown, then
 	the value is set to 1.25V.
 
-- VDDA-supply : the regulator provider of VDDA
-
-- VDDIO-supply: the regulator provider of VDDIO
-
-Optional properties:
-
-- VDDD-supply : the regulator provider of VDDD
-
 Example:
 
 codec: sgtl5000@0a {
Signature · 1 line
1.9.1
maintainer
#1 lore raw

Applied "ASoC: sgtl5000: Place optional properties in the correct section" to the asoc tree

The patch

ASoC: sgtl5000: Place optional properties in the correct section

has been applied to the asoc tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 10ff08029d9880e4bf70de0535f34ce239af7a9a Mon Sep 17 00:00:00 2001

From: Fabio Estevam <[email protected]>
Date: Tue, 31 May 2016 17:41:50 -0300
Subject: [PATCH] ASoC: sgtl5000: Place optional properties in the correct
section

'micbias-resistor-k-ohms' and 'micbias-voltage-m-volts' are optional properties, so move them below the 'Optional properties' line.

While at it, fix a typo in 'mentioned'.

---
 Documentation/devicetree/bindings/sound/sgtl5000.txt | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
Documentation/devicetree/bindings/sound/sgtl5000.txt +9 -9
index 0e5e4eb3ef1b..5666da7b8605 100644
@@ -7,6 +7,14 @@ Required properties:
 
 - clocks : the clock provider of SYS_MCLK
 
+- VDDA-supply : the regulator provider of VDDA
+
+- VDDIO-supply: the regulator provider of VDDIO
+
+Optional properties:
+
+- VDDD-supply : the regulator provider of VDDD
+
 - micbias-resistor-k-ohms : the bias resistor to be used in kOmhs
 	The resistor can take values of 2k, 4k or 8k.
 	If set to 0 it will be off.
@@ -15,17 +23,9 @@ Required properties:
 
 - micbias-voltage-m-volts : the bias voltage to be used in mVolts
 	The voltage can take values from 1.25V to 3V by 250mV steps
-	If this node is not mentionned or the value is unknown, then
+	If this node is not mentioned or the value is unknown, then
 	the value is set to 1.25V.
 
-- VDDA-supply : the regulator provider of VDDA
-
-- VDDIO-supply: the regulator provider of VDDIO
-
-Optional properties:
-
-- VDDD-supply : the regulator provider of VDDD
-
 Example:
 
 codec: sgtl5000@0a {
Signature · 1 line
2.8.1