Skip to contentSkip to conversation

Applied "regulator: anatop: set default voltage selector for pcie" to the regulator tree

PATCH Mark Brown 1 participant 1 message Apr 13, 2017 Voltage and current regulator framework

lore
Share & tools
lore

Mark Brown

author maintainer
#0 lore raw

The patch

regulator: anatop: set default voltage selector for pcie

has been applied to the regulator tree at

git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

Quoted 1 line

From 9bf944548169f6153c3d3778cf983cb5db251a0e Mon Sep 17 00:00:00 2001

From: Dong Aisheng <[email protected]>
Date: Wed, 12 Apr 2017 09:58:47 +0800
Subject: [PATCH] regulator: anatop: set default voltage selector for pcie

Set the initial voltage selector for vddpcie in case it's disabled by default.

This fixes the below warning:
20c8000.anatop:regulator-vddpcie: Failed to read a valid default voltage selector.
anatop_regulator: probe of 20c8000.anatop:regulator-vddpcie failed with error -22

Cc Liam Girdwood <[email protected]>
Cc Mark Brown <[email protected]>
Cc Shawn Guo <[email protected]>
Cc Sascha Hauer <[email protected]>
Cc Robin Gong <[email protected]>
Cc Richard Zhu <[email protected]>
---
 drivers/regulator/anatop-regulator.c | 5 +++++
 1 file changed, 5 insertions(+)
drivers/regulator/anatop-regulator.c +5 -0
index c6ce9745ffc8..fa27c9de6744 100644
@@ -299,6 +299,11 @@ static int anatop_regulator_probe(struct platform_device *pdev)
 		if (!sreg->sel && !strcmp(rdesc->name, "vddpu"))
 			sreg->sel = 22;
 
+		/* set the default voltage of the pcie phy to be 1.100v */
+		if (!sreg->sel && rdesc->name &&
+		    !strcmp(rdesc->name, "vddpcie"))
+			sreg->sel = 0x10;
+
 		if (!sreg->bypass && !sreg->sel) {
 			dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
 			return -EINVAL;
Signature · 1 line
2.11.0