Applied "regulator: anatop: set default voltage selector for pcie" to the regulator tree
Mark Brown
maintainerThe patch
regulator: anatop: set default voltage selector for pcie
has been applied to the regulator tree at
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
Quoted 1 line
From
9bf944548169f6153c3d3778cf983cb5db251a0eMon Sep 17 00:00:00 2001
From: Dong Aisheng <[email protected]>
Date: Wed, 12 Apr 2017 09:58:47 +0800
Subject: [PATCH] regulator: anatop: set default voltage selector for pcie
Set the initial voltage selector for vddpcie in case it's disabled by default.
This fixes the below warning:
20c8000.anatop:regulator-vddpcie: Failed to read a valid default voltage selector.anatop_regulator: probe of 20c8000.anatop:regulator-vddpcie failed with error -22
--- drivers/regulator/anatop-regulator.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/regulator/anatop-regulator.c +5 -0
@@ -299,6 +299,11 @@ static int anatop_regulator_probe(struct platform_device *pdev)if (!sreg->sel && !strcmp (rdesc->name,"vddpu" )) sreg->sel =22 ; +/* set the default voltage of the pcie phy to be 1.100v */ +if (!sreg->sel && rdesc->name && + !strcmp (rdesc->name,"vddpcie" )) + sreg->sel =0x10 ; +if (!sreg->bypass && !sreg->sel) {dev_err (&pdev->dev,"Failed to read a valid default voltage selector.\n" );return -EINVAL ;
Signature · 1 line
2.11.0