net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround
Subsystems (4)
PATCH 1/1 net: sfp: VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 workaround
Add a workaround for the VSOL V2801F / CarlitoxxPro CPGOS03-0490 v2.0 GPON module which the manufacturer states needs single byte I2C reads to the EEPROM.
--- drivers/net/phy/sfp.c | 45 ++++++++++++++++++++++++++++++++++++++----- 1 file changed, 40 insertions(+), 5 deletions(-)
drivers/net/phy/sfp.c +40 -5
@@ -219,6 +219,7 @@ struct sfp {struct sfp_bus *sfp_bus;struct phy_device *mod_phy;const struct sff_data *type; +size_t i2c_block_size;u32 max_power_mW;unsigned int (*get_state)(struct sfp *);
@@ -335,10 +336,19 @@ static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, size_t len) {struct i2c_msg msgs[2 ]; -u8 bus_addr = a2 ?0x51 :0x50 ; +size_t block_size;size_t this_len; +u8 bus_addr;int ret; +if (a2) { + block_size =16 ; + bus_addr =0x51 ; + }else { + block_size = sfp->i2c_block_size; + bus_addr =0x50 ; + } + msgs[0 ].addr = bus_addr; msgs[0 ].flags =0 ; msgs[0 ].len =1 ;
@@ -350,8 +360,8 @@ static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,while (len) { this_len = len; -if (this_len >16 ) - this_len =16 ; +if (this_len > sfp->i2c_block_size) + this_len = sfp->i2c_block_size; msgs[1 ].len = this_len;
@@ -1673,14 +1683,20 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report)u8 check;int ret; - ret =sfp_read (sfp, false,0 , &id,sizeof (id)); +/* Some modules (CarlitoxxPro CPGOS03-0490) do not support multibyte +* reads from the EEPROM, so start by reading the base identifying +* information one byte at a time. +*/ + sfp->i2c_block_size =1 ; + + ret =sfp_read (sfp, false,0 , &id.base,sizeof (id.base));if (ret <0 ) {if (report)dev_err (sfp->dev,"failed to read EEPROM: %d\n" , ret);return -EAGAIN ; } -if (ret !=sizeof (id)) { +if (ret !=sizeof (id.base)) {dev_err (sfp->dev,"EEPROM short read: %d\n" , ret);return -EAGAIN ; }
@@ -1719,6 +1735,25 @@ static int sfp_sm_mod_probe(struct sfp *sfp, bool report) } } +/* Some modules (Nokia 3FE46541AA) lock up if byte 0x51 is read as a +* single read. Switch back to reading 16 byte blocks unless we have +* a CarlitoxxPro module (rebranded VSOL V2801F). +*/ +if (memcmp (id.base.vendor_name,"VSOL " ,16 )) + sfp->i2c_block_size =16 ; + + ret =sfp_read (sfp, false,SFP_CC_BASE +1 , &id.ext,sizeof (id.ext)); +if (ret <0 ) { +if (report) +dev_err (sfp->dev,"failed to read EEPROM: %d\n" , ret); +return -EAGAIN ; + } + +if (ret !=sizeof (id.ext)) { +dev_err (sfp->dev,"EEPROM short read: %d\n" , ret); +return -EAGAIN ; + } + check =sfp_check (&id.ext,sizeof (id.ext) -1 );if (check != id.ext.cc_ext) {if (cotsworks) {
Signature · 1 line
2.20.1
kernel test robot
build botI love your patch! Perhaps something to improve:
Hi Russell,
I love your patch! Perhaps something to improve:
[auto build test WARNING on net-next/master]
url: https://github.com/0day-ci/linux/commits/Russell-King/net-sfp-VSOL-V2801F-CarlitoxxPro-CPGOS03-0490-v2-0-workaround/20201124-055921 base: https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git 8e1e33ffa696b2d779dd5cd422a80960b88e508c config: arc-randconfig-r016-20201123 (attached as .config) compiler: arc-elf-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# https://github.com/0day-ci/linux/commit/90849b26224de3b2e508f1c3fa31665f4fd72d0a
git remote add linux-review https://github.com/0day-ci/linux
git fetch --no-tags linux-review Russell-King/net-sfp-VSOL-V2801F-CarlitoxxPro-CPGOS03-0490-v2-0-workaround/20201124-055921 git checkout 90849b26224de3b2e508f1c3fa31665f4fd72d0a
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=arc
If you fix the issue, kindly add following tag as appropriate
All warnings (new ones prefixed by >>):
drivers/net/phy/sfp.c: In function 'sfp_i2c_read':
>> drivers/net/phy/sfp.c:339:9: warning: variable 'block_size' set but not used [-Wunused-but-set-variable]
339 | size_t block_size;
| ^~~~~~~~~~vim +/block_size +339 drivers/net/phy/sfp.c
334
335 static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf,
336 size_t len)
337 {
338 struct i2c_msg msgs[2];
> 339 size_t block_size;
340 size_t this_len;
341 u8 bus_addr;
342 int ret;
343
344 if (a2) {
345 block_size = 16;
346 bus_addr = 0x51;
347 } else {
348 block_size = sfp->i2c_block_size;
349 bus_addr = 0x50;
350 }
351
352 msgs[0].addr = bus_addr;
353 msgs[0].flags = 0;
354 msgs[0].len = 1;
355 msgs[0].buf = &dev_addr;
356 msgs[1].addr = bus_addr;
357 msgs[1].flags = I2C_M_RD;
358 msgs[1].len = len;
359 msgs[1].buf = buf;
360
361 while (len) {
362 this_len = len;
363 if (this_len > sfp->i2c_block_size)
364 this_len = sfp->i2c_block_size;
365
366 msgs[1].len = this_len;
367
368 ret = i2c_transfer(sfp->i2c, msgs, ARRAY_SIZE(msgs));
369 if (ret < 0)
370 return ret;
371
372 if (ret != ARRAY_SIZE(msgs))
373 break;
374
375 msgs[1].buf += this_len;
376 dev_addr += this_len;
377 len -= this_len;
378 }
379
380 return msgs[1].buf - (u8 *)buf;
381 }
382
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/[email protected]
Russell King - ARM Linux admin
maintainerQuoted 6 lines · kernel test robot
All warnings (new ones prefixed by >>):
drivers/net/phy/sfp.c: In function 'sfp_i2c_read':Quoted 1 line
Quoted 1 line
drivers/net/phy/sfp.c:339:9: warning: variable 'block_size' set but not used [-Wunused-but-set-variable]339 | size_t block_size; | ^~~~~~~~~~
I'm waiting for Thomas to re-test the fixed patch I sent, but Thomas seems to be of the opinion that there's no need to re-test, despite the fixed patch having the intended effect of changing the behaviour on the I2C bus.
If nothing is forthcoming, I'm intending to drop the patch; we don't need to waste time supporting untested workarounds for what are essentially broken SFPs by vendors twisting the SFP MSA in the kernel.
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Russell King - ARM Linux admin
maintainerQuoted 13 lines · Russell King - ARM Linux admin
Quoted 6 lines · kernel test robot
All warnings (new ones prefixed by >>):
drivers/net/phy/sfp.c: In function 'sfp_i2c_read':Quoted 1 line
Quoted 1 line
drivers/net/phy/sfp.c:339:9: warning: variable 'block_size' set but not used [-Wunused-but-set-variable]339 | size_t block_size; | ^~~~~~~~~~I'm waiting for Thomas to re-test the fixed patch I sent, but Thomas seems to be of the opinion that there's no need to re-test, despite the fixed patch having the intended effect of changing the behaviour on the I2C bus.
Quoted 4 lines
If nothing is forthcoming, I'm intending to drop the patch; we don't need to waste time supporting untested workarounds for what are essentially broken SFPs by vendors twisting the SFP MSA in the kernel.
I have had no further co-operation from Thomas so far. If I don't hear from someone who is able to test this module by this weekend, I will be dropping this patch from my repository.
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!
Andrew Lunn
maintainerdrivers/net/phy/sfp.c static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, · line 346
Quoted 13 lines
drivers/net/phy/sfp.c +5
-1@@ -335,10 +336,19 @@ static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, size_t len) {struct i2c_msg msgs[2 ]; -u8 bus_addr = a2 ?0x51 :0x50 ; +size_t block_size;size_t this_len; +u8 bus_addr;int ret; +if (a2) { + block_size =16 ; + bus_addr =0x51 ;
Hi Russell, Thomas
Does this man the diagnostic page can be read 16 bytes at a time, even when the other page has to be 1 bytes at a time? That seems rather odd. Or is the diagnostic page not implemented in these SFPs?
Andrew
Russell King - ARM Linux admin
maintainerQuoted 16 lines · Andrew Lunn
drivers/net/phy/sfp.c static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, · line 346
Quoted 13 lines
drivers/net/phy/sfp.c +5
-1@@ -335,10 +336,19 @@ static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 dev_addr, void *buf, size_t len) {struct i2c_msg msgs[2 ]; -u8 bus_addr = a2 ?0x51 :0x50 ; +size_t block_size;size_t this_len; +u8 bus_addr;int ret; +if (a2) { + block_size =16 ; + bus_addr =0x51 ;Hi Russell, Thomas
Quoted 3 lines
Does this man the diagnostic page can be read 16 bytes at a time, even when the other page has to be 1 bytes at a time? That seems rather odd. Or is the diagnostic page not implemented in these SFPs?
SFF8472 requires that multibyte values are read using sequential reads. So we can't use single byte reads to read a multibyte value - it's just not atomic.
Signature · 2 lines
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!