Skip to contentSkip to conversation

aplay: pcm_write:1025: write error & SNDRV_PCM_IOCTL_PREPAREfailed:device or resource busy

DISCUSSION Mark Knecht 4 participants 15 messages May 19, 2003 – Jun 3, 2003

lore
Share & tools
lore
#0 lore raw

Hi,
I brought up Alsa Friday on a Gentoo platform and used it for most of
Friday evening and Saturday in one form or another. Along the way I was building some new kernels to fix some SCSI issues and a few other items, which required that Alsa get rebuilt also as per the Gentoo Alsa instructions. This process went on for most of the day. Later Saturday evening, following who knows how many 'unrelated' changes, Alsa stopped working. The error messages look like this:

Wizard root # aplay wave/sequen~1.wav
Playing WAVE 'wave/sequen~1.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
aplay: pcm_write:1025: write error: Input/output error Wizard root #

or when trying to play a game like frozen-bubble, that app locks up hard and in my console I see:

ALSA Lib pcm_hw.c:467:(snd_pcm_hw_prepare)SNDRV_PCM_IOCTL_PREPARE failed:device or resource busy

alsaplayer starts to run, sees the CD (I.e. - shows track length) and then won't play the CD.

I'll attach a bit of data, but can anyone point me toward what might be causing this?

-- LSPCI

00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235 AC97 Audio Controller (rev 50)
Subsystem: Asustek Computer, Inc. A7V8X Motherboard (Realtek
ALC650 codec)
Flags: medium devsel, IRQ 22
I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2

-- LSMOD

Wizard modules.d # lsmod
Module Size Used by Not tainted

sr_mod                 14296   0  (autoclean)
ide-scsi                7536   0 
agpgart                11920   0  (autoclean) (unused)
ide-cd                 27080   0  (autoclean)
cdrom                  25984   0  (autoclean) [sr_mod ide-cd]
snd-via82xx            11692   0 
snd-ac97-codec         34624   0  [snd-via82xx]
snd-mpu401-uart         3456   0  [snd-via82xx]
snd-rawmidi            14432   0  [snd-mpu401-uart]
snd-seq-device          4192   0  [snd-rawmidi]
snd-pcm                60928   0  [snd-via82xx]
snd-timer              15240   0  [snd-pcm]
snd                    30852   0  [snd-via82xx snd-ac97-codec

snd-mpu401-uart snd-rawmidi snd-seq-device snd-pcm snd-timer]
snd-page-alloc 4908 0 [snd-via82xx snd-pcm]
Wizard modules.d #

-------------------------------------------------------
This SF.net email is sponsored by: If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software.
http://www.objectstore.net/sourceforge

#1 lore raw

At 18 May 2003 17:05:32 -0700,

Quoted 19 lines · Mark Knecht

Hi,
I brought up Alsa Friday on a Gentoo platform and used it for most of
Friday evening and Saturday in one form or another. Along the way I was building some new kernels to fix some SCSI issues and a few other items, which required that Alsa get rebuilt also as per the Gentoo Alsa instructions. This process went on for most of the day. Later Saturday evening, following who knows how many 'unrelated' changes, Alsa stopped working. The error messages look like this:

Wizard root # aplay wave/sequen~1.wav
Playing WAVE 'wave/sequen~1.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
aplay: pcm_write:1025: write error: Input/output error Wizard root #

or when trying to play a game like frozen-bubble, that app locks up hard and in my console I see:

Quoted 8 lines

ALSA Lib pcm_hw.c:467:(snd_pcm_hw_prepare)SNDRV_PCM_IOCTL_PREPARE failed:device or resource busy

alsaplayer starts to run, sees the CD (I.e. - shows track length) and then won't play the CD.

I'll attach a bit of data, but can anyone point me toward what might be causing this?

the chip looks like a VIA8235, so the (first) pcm device supports multiple playbacks but with the same sample rate.
please check whether there is any other app running and using the pcm device and if it uses different sample rates (e.g. 48kHz)...

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: ObjectStore.
If flattening out C++ or Java code to make your application fit in a relational database is painful, don't do it! Check out ObjectStore. Now part of Progress Software. http://www.objectstore.net/sourceforge

#2 lore raw

Sorry this is a bit long. Mostly just data. I hope it helps figure this out. Sort of strange that the chip is identified in one place as a VIA8233 and in another place as a VIA8235....

Quoted 30 lines · Takashi Iwai

At 18 May 2003 17:05:32 -0700,

Quoted 19 lines · Mark Knecht

Hi,
I brought up Alsa Friday on a Gentoo platform and used it for most of
Friday evening and Saturday in one form or another. Along the way I was building some new kernels to fix some SCSI issues and a few other items, which required that Alsa get rebuilt also as per the Gentoo Alsa instructions. This process went on for most of the day. Later Saturday evening, following who knows how many 'unrelated' changes, Alsa stopped working. The error messages look like this:

Wizard root # aplay wave/sequen~1.wav
Playing WAVE 'wave/sequen~1.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
aplay: pcm_write:1025: write error: Input/output error Wizard root #

or when trying to play a game like frozen-bubble, that app locks up hard and in my console I see:

Quoted 8 lines

ALSA Lib pcm_hw.c:467:(snd_pcm_hw_prepare)SNDRV_PCM_IOCTL_PREPARE failed:device or resource busy

alsaplayer starts to run, sees the CD (I.e. - shows track length) and then won't play the CD.

I'll attach a bit of data, but can anyone point me toward what might be causing this?

Quoted 7 lines

the chip looks like a VIA8235, so the (first) pcm device supports multiple playbacks but with the same sample rate.
please check whether there is any other app running and using the pcm device and if it uses different sample rates (e.g. 48kHz)...

Takashi

Takashi-san,
To the best of my knowledge there are no other apps using sound in
any way. The environment is fluxbox, which doesn't use sound. I get the same results in a console after a cold boot before starting fluxbox also. I've tried playing 48KHz and 44.1KHz wave files and get the same results.

There is a strange thing I noticed about how the chip is set up
though. I've loaded the via82xx driver. In /proc/pci the chip identifies itself as an VIA8233:

Wizard root # grep audio /proc/pci
Multimedia audio controller: Xilinx, Inc. RME Hammerfall DSP (rev
104).
Multimedia audio controller: VIA Technologies, Inc. VT8233 AC97
Audio Controller (rev 80).
Wizard root #

However, in aplay it identifies itself as a VIA 8235:

bash-2.05b$ aplay -l
**** List of PLAYBACK Hardware Devices **** card 0: 8235 [VIA 8235], device 0: VIA 8235 [VIA 8235]
Subdevices: 4/4
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
card 0: 8235 [VIA 8235], device 1: VIA 8235 [VIA 8235]
Subdevices: 1/1
Subdevice #0: subdevice #0
bash-2.05b$

There are no processes running that are obviously usign audio, as far as I can see:

bash-2.05b$ ps aux

USER       PID %CPU %MEM   VSZ  RSS TTY      STAT START   TIME COMMAND
root         1  0.2  0.0  1352  496 ?        S    20:54   0:04 init
root         2  0.0  0.0     0    0 ?        SW   20:54   0:00 [keventd]
root         3  0.0  0.0     0    0 ?        SWN  20:54   0:00
[ksoftirqd_CPU0]
root         4  0.0  0.0     0    0 ?        SW   20:54   0:00 [kswapd]
root         5  0.0  0.0     0    0 ?        SW   20:54   0:00 [bdflush]
root         6  0.0  0.0     0    0 ?        SW   20:54   0:00
[kupdated]
root         8  0.0  0.0     0    0 ?        SW   20:54   0:00 [khubd]
root        12  0.0  0.0     0    0 ?        SW   20:54   0:00

[kjournald]
root 36 0.0 0.1 1748 916 ? S 20:54 0:00
/sbin/devfsd /dev
root 843 0.0 0.1 1428 572 ? S 20:54 0:00
/usr/sbin/syslogd -m 0
root 846 0.0 0.1 1472 576 ? S 20:54 0:00
/usr/sbin/klogd -c 3 -2
root 849 0.0 0.1 1472 568 ? S 20:54 0:00
/usr/sbin/crond
root 1089 0.0 0.2 2732 1284 ? S 20:54 0:00
/usr/sbin/sshd

xfs       1242  0.0  0.9  6264 4772 ?        S    20:54   0:00 [xfs]
root      1252  0.0  0.2  2288 1236 ?        S    20:54   0:00 [login]
root      1253  0.0  0.0  1336  424 vc/2     S    20:54   0:00
/sbin/agetty 38400 tty2 linux
root      1254  0.0  0.0  1336  424 vc/3     S    20:54   0:00
/sbin/agetty 38400 tty3 linux
mark      1322  0.0  0.2  2292 1372 vc/1     S    20:54   0:00 -bash
mark      1331  0.0  0.1  2036  976 vc/1     S    20:55   0:00 /bin/sh
/usr/X11R6/bin/startx
mark      1342  0.0  0.1  2324  624 vc/1     S    20:55   0:00 xinit
/home/mark/.xinitrc -- -deferglyphs 16
root      1343  0.3  2.5 92644 13356 ?       R    20:55   0:06 [X]
mark      1361  0.0  0.5  5212 2648 vc/1     S    20:55   0:00
/usr/bin/fluxbox
mark      1560  0.0  0.3  3692 1832 ?        S    21:13   0:00
/usr/bin/gconfd-1 12
mark      1628  0.0  0.8  6928 4332 ?        R    21:21   0:00 [xterm]
mark      1629  0.0  0.2  2312 1396 pts/0    S    21:21   0:00 bash
mark      1638  0.0  0.1  2664  800 pts/0    R    21:23   0:00 ps aux

My .asoundrc file is as per the web page I Think:

bash-2.05b$ more .asoundrc
pcm.via82xx {
type hw
card 0
}

ctl.via82xx {
type hw
card 0
}

The error again:

bash-2.05b$ aplay jazztrap-5-4-groove-28.wav
Playing WAVE 'jazztrap-5-4-groove-28.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo
aplay: pcm_write:1025: write error: Input/output error

bash-2.05b$ su -
Password:
Wizard root # lsmod
Module Size Used by Not tainted

radeon                101572   1 
agpgart                11920   3  (autoclean)
ide-cd                 27080   0  (autoclean)
cdrom                  25984   0  (autoclean) [ide-cd]
snd-via82xx            11692   0 
snd-ac97-codec         34624   0  [snd-via82xx]
snd-mpu401-uart         3456   0  [snd-via82xx]
snd-rawmidi            14432   0  [snd-mpu401-uart]
snd-seq-device          4192   0  [snd-rawmidi]
snd-pcm                60928   0  [snd-via82xx]
snd-timer              15240   0  [snd-pcm]
snd                    30852   0  [snd-via82xx snd-ac97-codec

snd-mpu401-uart snd-rawmidi snd-seq-device snd-pcm snd-timer]
snd-page-alloc 4908 0 [snd-via82xx snd-pcm]
Wizard root #

### modules-update: start processing /etc/modules.d/alsa
# Alsa 0.9.X kernel modules' configuration file.
# $Header:
/home/cvsroot/gentoo-x86/media-sound/alsa-driver/files/alsa-modules.conf-rc,v 1.1 2002/12/21 06:31:52 agenkin Exp $

# ALSA portion
alias char-major-116 snd
# OSS/Free portion
alias char-major-14 soundcore

##
## IMPORTANT:
## You need to customise this section for your specific sound card(s) ## and then run `update-modules' command.
## Read alsa-driver's INSTALL file in /usr/share/doc for more info. ##
## ALSA portion
alias snd-card-0 snd-via82xx
## alias snd-card-1 snd-ens1371
## OSS/Free portion
alias sound-slot-0 snd-card-0
## alias sound-slot-1 snd-card-1
##

# OSS/Free portion - card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
## OSS/Free portion - card #2
## alias sound-service-1-0 snd-mixer-oss
## alias sound-service-1-3 snd-pcm-oss
## alias sound-service-1-12 snd-pcm-oss

alias /dev/mixer snd-mixer-oss
alias /dev/dsp snd-pcm-oss
alias /dev/midi snd-seq-oss

# Set this to the correct number of cards.
options snd cards_limit=1

### modules-update: end processing /etc/modules.d/alsa

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#3 lore raw

At 29 May 2003 21:43:39 -0700,

Quoted 4 lines · Mark Knecht

Sorry this is a bit long. Mostly just data. I hope it helps figure this out. Sort of strange that the chip is identified in one place as a VIA8233 and in another place as a VIA8235....

in fact, both VIA8233 and 8235 have the same PCI ID. that's why lspci shows the same name (while 8235 has the revision 0x50).

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#4 lore raw

Takashi,
While I find this interesting, it doesn't address the problem. I sent a
bunch of information and data in the last two emails. Have I sent what you need? Are you able to make any assessment about why aplay will not work with this this sound chip on my Asus motherboard?

With best regards,
Mark

Quoted 24 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Takashi Iwai
Sent: Monday, June 02, 2003 4:12 AM
To: Mark Knecht
Cc: Alsa-Devel
Subject: Re: [Alsa-devel] aplay: pcm_write:1025: write error & SNDRV_PCM_IOCTL_PREPAREfailed:device or resource busy

At 29 May 2003 21:43:39 -0700,

Quoted 4 lines · Mark Knecht

Sorry this is a bit long. Mostly just data. I hope it helps figure this out. Sort of strange that the chip is identified in one place as a VIA8233 and in another place as a VIA8235....

in fact, both VIA8233 and 8235 have the same PCI ID. that's why lspci shows the same name (while 8235 has the revision 0x50).

Takashi

Quoted 10 lines

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#5 lore raw

At Mon, 2 Jun 2003 06:41:12 -0700,

Quoted 6 lines · Mark Knecht

Takashi,
While I find this interesting, it doesn't address the problem. I sent a
bunch of information and data in the last two emails. Have I sent what you need? Are you able to make any assessment about why aplay will not work with this this sound chip on my Asus motherboard?

well, i'm still not sure how can it happen.
it looks like an unusual case.

anyway, in general, BIOS on some ASUS boards have a bug, and the first PCM device won't work on them.

could you try to add the module option dxs_support=2 or 3 ? the option 2 will disable the DXS channel support and works as VIA8233A chip. the option 3 suppresses the sample rate 48k only.

Takashi

Quoted 40 lines

With best regards,
Mark

Quoted 34 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of Takashi Iwai
Sent: Monday, June 02, 2003 4:12 AM
To: Mark Knecht
Cc: Alsa-Devel
Subject: Re: [Alsa-devel] aplay: pcm_write:1025: write error & SNDRV_PCM_IOCTL_PREPAREfailed:device or resource busy

At 29 May 2003 21:43:39 -0700,

Quoted 4 lines · Mark Knecht

Sorry this is a bit long. Mostly just data. I hope it helps figure this out. Sort of strange that the chip is identified in one place as a VIA8233 and in another place as a VIA8235....

in fact, both VIA8233 and 8235 have the same PCI ID. that's why lspci shows the same name (while 8235 has the revision 0x50).

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#6 lore raw

Takashi,
Thanks for the fast response. Can you give me the exact format for adding
the module options? I'm not sure which module to add this to, nor have I ever added module options by hand before. Please be clear as I am not a software person. /etc/modules.conf? Which line?

Thanks,
Mark

Quoted 49 lines

-----Original Message-----
From: Takashi Iwai [mailto:[email protected]]
Sent: Monday, June 02, 2003 6:56 AM
To: Mark Knecht
Cc: Alsa-Devel
Subject: Re: [Alsa-devel] aplay: pcm_write:1025: write error & SNDRV_PCM_IOCTL_PREPAREfailed:device or resource busy

At Mon, 2 Jun 2003 06:41:12 -0700,

Quoted 3 lines · Mark Knecht

Takashi,
While I find this interesting, it doesn't address the

problem. I sent a

Quoted 1 line

bunch of information and data in the last two emails. Have I

sent what you

Quoted 1 line

need? Are you able to make any assessment about why aplay will

not work with

Quoted 1 line

this this sound chip on my Asus motherboard?

well, i'm still not sure how can it happen.
it looks like an unusual case.

anyway, in general, BIOS on some ASUS boards have a bug, and the first PCM device won't work on them.

could you try to add the module option dxs_support=2 or 3 ? the option 2 will disable the DXS channel support and works as VIA8233A chip. the option 3 suppresses the sample rate 48k only.

Takashi

Quoted 7 lines

With best regards,
Mark

Quoted 3 lines

-----Original Message-----
From: [email protected] [mailto:[email protected]]On Behalf Of

Takashi Iwai

Quoted 7 lines
Quoted 7 lines

Sent: Monday, June 02, 2003 4:12 AM
To: Mark Knecht
Cc: Alsa-Devel
Subject: Re: [Alsa-devel] aplay: pcm_write:1025: write error & SNDRV_PCM_IOCTL_PREPAREfailed:device or resource busy

Quoted 29 lines
Quoted 4 lines
Quoted 4 lines

At 29 May 2003 21:43:39 -0700,

Quoted 2 lines · Mark Knecht

Sorry this is a bit long. Mostly just data. I hope it helps

figure this

Quoted 22 lines
Quoted 20 lines
Quoted 2 lines

out. Sort of strange that the chip is identified in one place as a VIA8233 and in another place as a VIA8235....

in fact, both VIA8233 and 8235 have the same PCI ID. that's why lspci shows the same name (while 8235 has the revision 0x50).

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#7 lore raw

At Mon, 2 Jun 2003 07:20:05 -0700,

Quoted 6 lines · Mark Knecht

Takashi,
Thanks for the fast response. Can you give me the exact format for adding
the module options? I'm not sure which module to add this to, nor have I ever added module options by hand before. Please be clear as I am not a software person. /etc/modules.conf? Which line?

just add the following line to the end of /etc/modules.conf:

options snd-via82xx dxs_support=2

(or dxs_support=3)

and run "/etc/init.d/alsasound restart".

note that the option above is available only on the very recent ALSA version.

ciao,

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#8 lore raw
Quoted 9 lines

just add the following line to the end of /etc/modules.conf:

options snd-via82xx dxs_support=2

(or dxs_support=3)

and run "/etc/init.d/alsasound restart".

Quoted 7 lines

note that the option above is available only on the very recent ALSA version.

ciao,

Takashi

Thanks. That's very clear. I'll try it this evening. (At work right now.)

As for Alsa versions, this is a Gentoo ebuild of Alsa. It identifies itself as '0.9.3c-r1'. (Is that right? I might have thought 0.9.3-rc1?) Anyway, that's what it says. New enough for these options?

Thanks much!

Mark

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#9 lore raw

At Mon, 2 Jun 2003 07:33:47 -0700,

Quoted 16 lines · Mark Knecht
Quoted 16 lines

just add the following line to the end of /etc/modules.conf:

options snd-via82xx dxs_support=2

(or dxs_support=3)

and run "/etc/init.d/alsasound restart".

note that the option above is available only on the very recent ALSA version.

ciao,

Quoted 7 lines
Quoted 1 line

Takashi

Thanks. That's very clear. I'll try it this evening. (At work right now.)

As for Alsa versions, this is a Gentoo ebuild of Alsa. It identifies itself as '0.9.3c-r1'. (Is that right? I might have thought 0.9.3-rc1?) Anyway, that's what it says. New enough for these options?

hmm.. sorry, i can't remember.

just try and check /proc/asound/card0 whether pcm2p directory exists there :)

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#10 lore raw
In reply to Takashi Iwai
Quoted 10 lines · Takashi Iwai

just add the following line to the end of /etc/modules.conf:

options snd-via82xx dxs_support=2

(or dxs_support=3)

and run "/etc/init.d/alsasound restart".

note that the option above is available only on the very recent ALSA version.

A solution is found! But I'd like to understand why the other failed:

Wizard root # aplay -D hw:0,1 /home/mark/data/wave/seque~10.wav Playing WAVE '/home/mark/data/wave/seque~10.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono

And I get sound just fine...

Why is specifying the device required? As root I have no .asoundrc file, but as a user I do:

pcm.via82xx {
type hw
card 0
}

ctl.via82xx {
type hw
card 0
}

Apparently my version is not new enough for your new option:

Wizard modules.d # /etc/init.d/alsasound restart
* Shutting down ALSA
modules.... [ ok ]
* Initialising ALSA....
* Starting sound driver: snd-via82xx Warning: ignoring dxs_support=2,
no such parameter in this module
Module snd-via82xx loaded, with
warnings [ ok ]

Wizard modules.d #

And pcm2p did not exist...

Wizard root # ls /proc/asound/card0/ ac97#0 ac97#0regs id pcm0c pcm0p pcm1c pcm1p Wizard root #

Wizard root # aplay -v /home/mark/data/wave/seque~10.wav Playing WAVE '/home/mark/data/wave/seque~10.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
Plug PCM: Hardware PCM card 0 'VIA 8235' device 0 subdevice 0

Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 1
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16
buffer_size : 22050
period_size : 4410
period_time : 100000
tick_time : 10000
tstamp_mode : NONE
period_step : 1
sleep_min : 0
avail_min : 4410
xfer_align : 4410
start_threshold : 22050
stop_threshold : 22050
silence_threshold: 0
silence_size : 0
boundary : 1445068800
aplay: pcm_write:1025: write error: Input/output error Wizard root #

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#11 lore raw
In reply to Takashi Iwai
Quoted 4 lines

anyway, in general, BIOS on some ASUS boards have a bug, and the first PCM device won't work on them.

Can I tell aplay to use any other PCM device? The second device? How might I do this?

aplay hw:1 sound.wav???

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#12 lore raw

At Mon, 2 Jun 2003 07:35:49 -0700,

Quoted 10 lines · Mark Knecht
Quoted 5 lines

anyway, in general, BIOS on some ASUS boards have a bug, and the first PCM device won't work on them.

Can I tell aplay to use any other PCM device? The second device? How might I do this?

aplay hw:1 sound.wav???

please use -D option, for example,

	% aplay -D hw:0,1 sound.wav

for the second pcm device. the first 0 means the first "card" and you cannot ommit it to specify the pcm device number.

Takashi

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#13 lore raw
Quoted 10 lines
Quoted 2 lines

aplay hw:1 sound.wav???

please use -D option, for example,

	% aplay -D hw:0,1 sound.wav

for the second pcm device. the first 0 means the first "card" and you cannot ommit it to specify the pcm device number.

Thanks. This explanation makes sense. I'll try it out this evening and get back to you then.

Cheers,
Mark

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5

#14 lore raw
In reply to Mark Knecht

most likely,

aplay -D hw:1,0 sound.wav

d!

Quoted 21 lines · Mark Knecht
Quoted 4 lines

anyway, in general, BIOS on some ASUS boards have a bug, and the first PCM device won't work on them.

Can I tell aplay to use any other PCM device? The second device? How might I do this?

aplay hw:1 sound.wav???

-------------------------------------------------------
This SF.net email is sponsored by: eBay
Get office equipment for less on eBay!
http://adfarm.mediaplex.com/ad/ck/711-11697-6916-5
_______________________________________________
Alsa-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/alsa-devel