for 53c700 chip and NCR_D700 card against 2.4.4
Quoted 1 line
New SCSI driver for 53c700 chip
Good!
If I am not mistaken, Richard Hirst has also done work on this thing.
The Panther/lp486e/PWS/... has on-board ethernet (82596) and this now works under both 2.2 and 2.4.
It also has on-board SCSI (NCR 53c700-66), maybe memory mapped, I forget. Maybe nobody knows the addresses.
It would be somewhat interesting to get that thing to work as well.
Andries
Quoted 1 line
If I am not mistaken, Richard Hirst has also done work on this thing.
He did 53c710+. The 700 and 700/66 are much less capable devices.
According to http://www.murphy.nl/~ard/systems/pws/pws/node18.html
the NCR 53c700/66 is mapped at 0xCC0-0xCFF.
The system board id looks interesting too. I wonder if its related to the mac address.. Sadly my box is dead so I cant poke
Quoted 3 lines · Alan Cox
Quoted 1 line
If I am not mistaken, Richard Hirst has also done work on this thing.
He did 53c710+. The 700 and 700/66 are much less capable devices.
I did 53c700 as well, in the parisc-linux tree. Sounds like James' driver is more featureful than mine though.
Richard
Quoted 7 lines · Alan Cox
Quoted 3 lines
Quoted 1 line
If I am not mistaken, Richard Hirst has also done work on this thing.
He did 53c710+. The 700 and 700/66 are much less capable devices.
I did 53c700 as well, in the parisc-linux tree. Sounds like James' driver is more featureful than mine though.
I'll skip feeding the driver on to Linus until the two of you figure out the best path then