Skip to contentSkip to conversation

staging: rtl8192e: Remove entries from struct rtl819x_ops start with .tx_enable

PATCH In review Philipp Hortmann 2 participants 9 messages Feb 21, 2023 – Feb 22, 2023 Staging

lore
Share & tools
lore
#0 lore raw

cover staging: rtl8192e: Remove entries from struct rtl819x_ops start with .tx_enable

Remove unnecessary entries from rtl819x_ops and replace them with function names when required. This increases readability of the code as the reader does not always need to look up the corresponding function name. One patch just removes dead code which increases also readability.

Tested with rtl8192e
Transferred this patch over wlan connection of rtl8192e

This patch series requires the this patch series:
"[PATCH 00/11] staging: rtl8192e: Remove entries from struct rtl819x_ops start with .get_eeprom_size"

Philipp Hortmann (7):
staging: rtl8192e: Remove entry .tx_enable from struct rtl819x_ops
staging: rtl8192e: Remove entry .interrupt_re.. from struct

    rtl819x_ops
  staging: rtl8192e: Remove entry .tx_check_stuc.. from struct
    rtl819x_ops
  staging: rtl8192e: Remove entry .rx_check_stuc.. from struct
    rtl819x_ops

staging: rtl8192e: Remove dead code from struct rtl819x_ops
staging: rtl8192e: Remove entry .link_change from struct rtl819x_ops
staging: rtl8192e: Remove entry .nic_type from struct rtl819x_ops

 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 20 +++++---------------
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 12 ------------
 drivers/staging/rtl8192e/rtl8192e/rtl_pci.c  |  6 +++---
 3 files changed, 8 insertions(+), 30 deletions(-)
Signature · 1 line
2.39.2
#1 lore raw

PATCH 1/7 staging: rtl8192e: Remove entry .tx_enable from struct rtl819x_ops

Remove entry .tx_enable and replace it with function name rtl92e_enable_tx. This increases readability of the code.

---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 3 +--
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 1 -
 2 files changed, 1 insertion(+), 3 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +1 -2
index aa0456931b09..f1cde3fc8634 100644
@@ -30,7 +30,6 @@ static const struct rtl819x_ops rtl819xp_ops = {
 	.link_change			= rtl92e_link_change,
 	.rx_command_packet_handler = NULL,
 	.irq_clear			= rtl92e_clear_irq,
-	.tx_enable			= rtl92e_enable_tx,
 	.interrupt_recognized		= rtl92e_ack_irq,
 	.tx_check_stuck_handler	= rtl92e_is_tx_stuck,
 	.rx_check_stuck_handler	= rtl92e_is_rx_stuck,
@@ -1406,7 +1405,7 @@ void rtl92e_tx_enable(struct net_device *dev)
 {
 	struct r8192_priv *priv = rtllib_priv(dev);
 
-	priv->ops->tx_enable(dev);
+	rtl92e_enable_tx(dev);
 
 	rtllib_reset_queue(priv->rtllib);
 }
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -1
index 71958c7a4cbf..79281c077182 100644
@@ -211,7 +211,6 @@ struct rtl819x_ops {
 					  struct sk_buff *skb,
 					  struct rx_desc *pdesc);
 	void (*irq_clear)(struct net_device *dev);
-	void (*tx_enable)(struct net_device *dev);
 	void (*interrupt_recognized)(struct net_device *dev,
 				     u32 *p_inta, u32 *p_intb);
 	bool (*tx_check_stuck_handler)(struct net_device *dev);
Signature · 1 line
2.39.2
#2 lore raw

PATCH 2/7 staging: rtl8192e: Remove entry .interrupt_re.. from struct rtl819x_ops

In reply to Philipp Hortmann

Remove entry .interrupt_recognized and replace it with function name rtl92e_ack_irq. This increases readability of the code.

---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 3 +--
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 2 --
 2 files changed, 1 insertion(+), 4 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +1 -2
index f1cde3fc8634..3323bdf564ee 100644
@@ -30,7 +30,6 @@ static const struct rtl819x_ops rtl819xp_ops = {
 	.link_change			= rtl92e_link_change,
 	.rx_command_packet_handler = NULL,
 	.irq_clear			= rtl92e_clear_irq,
-	.interrupt_recognized		= rtl92e_ack_irq,
 	.tx_check_stuck_handler	= rtl92e_is_tx_stuck,
 	.rx_check_stuck_handler	= rtl92e_is_rx_stuck,
 };
@@ -2103,7 +2102,7 @@ static irqreturn_t _rtl92e_irq(int irq, void *netdev)
 
 	spin_lock_irqsave(&priv->irq_th_lock, flags);
 
-	priv->ops->interrupt_recognized(dev, &inta, &intb);
+	rtl92e_ack_irq(dev, &inta, &intb);
 
 	if (!inta) {
 		spin_unlock_irqrestore(&priv->irq_th_lock, flags);
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -2
index 79281c077182..d3558bf6ce23 100644
@@ -211,8 +211,6 @@ struct rtl819x_ops {
 					  struct sk_buff *skb,
 					  struct rx_desc *pdesc);
 	void (*irq_clear)(struct net_device *dev);
-	void (*interrupt_recognized)(struct net_device *dev,
-				     u32 *p_inta, u32 *p_intb);
 	bool (*tx_check_stuck_handler)(struct net_device *dev);
 	bool (*rx_check_stuck_handler)(struct net_device *dev);
 };
Signature · 1 line
2.39.2
#3 lore raw

PATCH 3/7 staging: rtl8192e: Remove entry .tx_check_stuc.. from struct rtl819x_ops

In reply to Philipp Hortmann

Remove entry .tx_check_stuck_handler and replace it with function name rtl92e_is_tx_stuck. This increases readability of the code.

---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 3 +--
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 1 -
 2 files changed, 1 insertion(+), 3 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +1 -2
index 3323bdf564ee..410c03833b9f 100644
@@ -30,7 +30,6 @@ static const struct rtl819x_ops rtl819xp_ops = {
 	.link_change			= rtl92e_link_change,
 	.rx_command_packet_handler = NULL,
 	.irq_clear			= rtl92e_clear_irq,
-	.tx_check_stuck_handler	= rtl92e_is_tx_stuck,
 	.rx_check_stuck_handler	= rtl92e_is_rx_stuck,
 };
 
@@ -1055,7 +1054,7 @@ static enum reset_type _rtl92e_tx_check_stuck(struct net_device *dev)
 	spin_unlock_irqrestore(&priv->irq_th_lock, flags);
 
 	if (bCheckFwTxCnt) {
-		if (priv->ops->tx_check_stuck_handler(dev))
+		if (rtl92e_is_tx_stuck(dev))
 			return RESET_TYPE_SILENT;
 	}
 
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -1
index d3558bf6ce23..87be8aaa7822 100644
@@ -211,7 +211,6 @@ struct rtl819x_ops {
 					  struct sk_buff *skb,
 					  struct rx_desc *pdesc);
 	void (*irq_clear)(struct net_device *dev);
-	bool (*tx_check_stuck_handler)(struct net_device *dev);
 	bool (*rx_check_stuck_handler)(struct net_device *dev);
 };
 
Signature · 1 line
2.39.2
#4 lore raw

PATCH 4/7 staging: rtl8192e: Remove entry .rx_check_stuc.. from struct rtl819x_ops

In reply to Philipp Hortmann

Remove entry .rx_check_stuck_handler and replace it with function name rtl92e_is_rx_stuck. This increases readability of the code.

---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 5 +----
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 1 -
 2 files changed, 1 insertion(+), 5 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +1 -4
index 410c03833b9f..15eab612b08f 100644
@@ -30,7 +30,6 @@ static const struct rtl819x_ops rtl819xp_ops = {
 	.link_change			= rtl92e_link_change,
 	.rx_command_packet_handler = NULL,
 	.irq_clear			= rtl92e_clear_irq,
-	.rx_check_stuck_handler	= rtl92e_is_rx_stuck,
 };
 
 static struct pci_device_id rtl8192_pci_id_tbl[] = {
@@ -1063,9 +1062,7 @@ static enum reset_type _rtl92e_tx_check_stuck(struct net_device *dev)
 
 static enum reset_type _rtl92e_rx_check_stuck(struct net_device *dev)
 {
-	struct r8192_priv *priv = rtllib_priv(dev);
-
-	if (priv->ops->rx_check_stuck_handler(dev))
+	if (rtl92e_is_rx_stuck(dev))
 		return RESET_TYPE_SILENT;
 
 	return RESET_TYPE_NORESET;
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -1
index 87be8aaa7822..43e1c651e6d2 100644
@@ -211,7 +211,6 @@ struct rtl819x_ops {
 					  struct sk_buff *skb,
 					  struct rx_desc *pdesc);
 	void (*irq_clear)(struct net_device *dev);
-	bool (*rx_check_stuck_handler)(struct net_device *dev);
 };
 
 struct r8192_priv {
Signature · 1 line
2.39.2
#5 lore raw

PATCH 5/7 staging: rtl8192e: Remove dead code from struct rtl819x_ops

In reply to Philipp Hortmann

Remove entry .rx_command_packet_handler, .irq_clear and .init_before_adapter_start as it is dead code.

---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 2 --
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 5 -----
 2 files changed, 7 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +0 -2
index 15eab612b08f..0c1eb75f37f6 100644
@@ -28,8 +28,6 @@ static char *ifname = "wlan%d";
 static const struct rtl819x_ops rtl819xp_ops = {
 	.nic_type			= NIC_8192E,
 	.link_change			= rtl92e_link_change,
-	.rx_command_packet_handler = NULL,
-	.irq_clear			= rtl92e_clear_irq,
 };
 
 static struct pci_device_id rtl8192_pci_id_tbl[] = {
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -5
index 43e1c651e6d2..e572915c1fd2 100644
@@ -205,12 +205,7 @@ struct rtl8192_tx_ring {
 
 struct rtl819x_ops {
 	enum nic_t nic_type;
-	void (*init_before_adapter_start)(struct net_device *dev);
 	void (*link_change)(struct net_device *dev);
-	bool (*rx_command_packet_handler)(struct net_device *dev,
-					  struct sk_buff *skb,
-					  struct rx_desc *pdesc);
-	void (*irq_clear)(struct net_device *dev);
 };
 
 struct r8192_priv {
Signature · 1 line
2.39.2
#6 lore raw

PATCH 6/7 staging: rtl8192e: Remove entry .link_change from struct rtl819x_ops

In reply to Philipp Hortmann

Remove entry .link_change and replace it with function name rtl92e_link_change. This increases readability of the code.

---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 3 +--
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 1 -
 2 files changed, 1 insertion(+), 3 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +1 -2
index 0c1eb75f37f6..2d2f9d4a0ff5 100644
@@ -27,7 +27,6 @@ static char *ifname = "wlan%d";
 
 static const struct rtl819x_ops rtl819xp_ops = {
 	.nic_type			= NIC_8192E,
-	.link_change			= rtl92e_link_change,
 };
 
 static struct pci_device_id rtl8192_pci_id_tbl[] = {
@@ -762,7 +761,7 @@ static void _rtl92e_init_priv_handler(struct net_device *dev)
 
 	priv->rtllib->softmac_hard_start_xmit	= _rtl92e_hard_start_xmit;
 	priv->rtllib->set_chan			= _rtl92e_set_chan;
-	priv->rtllib->link_change		= priv->ops->link_change;
+	priv->rtllib->link_change		= rtl92e_link_change;
 	priv->rtllib->softmac_data_hard_start_xmit = _rtl92e_hard_data_xmit;
 	priv->rtllib->check_nic_enough_desc	= _rtl92e_check_nic_enough_desc;
 	priv->rtllib->handle_assoc_response	= _rtl92e_handle_assoc_response;
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -1
index e572915c1fd2..fa72f8891409 100644
@@ -205,7 +205,6 @@ struct rtl8192_tx_ring {
 
 struct rtl819x_ops {
 	enum nic_t nic_type;
-	void (*link_change)(struct net_device *dev);
 };
 
 struct r8192_priv {
Signature · 1 line
2.39.2
#7 lore raw

PATCH 7/7 staging: rtl8192e: Remove entry .nic_type from struct rtl819x_ops

In reply to Philipp Hortmann

Remove unchanged entry .nic_type and replace it with constant NIC_8192E. This increases readability of the code.

---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 1 -
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 1 -
 drivers/staging/rtl8192e/rtl8192e/rtl_pci.c  | 6 +++---
 3 files changed, 3 insertions(+), 5 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +0 -1
index 2d2f9d4a0ff5..044cab649ff1 100644
@@ -26,7 +26,6 @@ int hwwep = 1;
 static char *ifname = "wlan%d";
 
 static const struct rtl819x_ops rtl819xp_ops = {
-	.nic_type			= NIC_8192E,
 };
 
 static struct pci_device_id rtl8192_pci_id_tbl[] = {
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -1
index fa72f8891409..f75cc96052d9 100644
@@ -204,7 +204,6 @@ struct rtl8192_tx_ring {
 };
 
 struct rtl819x_ops {
-	enum nic_t nic_type;
 };
 
 struct r8192_priv {
drivers/staging/rtl8192e/rtl8192e/rtl_pci.c +3 -3
index 81e1bb856c60..0bc3e013001e 100644
@@ -39,7 +39,7 @@ bool rtl92e_check_adapter(struct pci_dev *pdev, struct net_device *dev)
 	revision_id = pdev->revision;
 	pci_read_config_word(pdev, 0x3C, &irq_line);
 
-	priv->card_8192 = priv->ops->nic_type;
+	priv->card_8192 = NIC_8192E;
 
 	if (device_id == 0x8192) {
 		switch (revision_id) {
@@ -64,10 +64,10 @@ bool rtl92e_check_adapter(struct pci_dev *pdev, struct net_device *dev)
 		}
 	}
 
-	if (priv->ops->nic_type != priv->card_8192) {
+	if (priv->card_8192 != NIC_8192E) {
 		dev_info(&pdev->dev,
 			 "Detect info(%x) and hardware info(%x) not match!\n",
-			 priv->ops->nic_type, priv->card_8192);
+			 NIC_8192E, priv->card_8192);
 		dev_info(&pdev->dev,
 			 "Please select proper driver before install!!!!\n");
 		return false;
Signature · 1 line
2.39.2
#8 lore raw

Re: [PATCH 7/7] staging: rtl8192e: Remove entry .nic_type from struct rtl819x_ops

Quoted 15 lines · Philipp Hortmann

Remove unchanged entry .nic_type and replace it with constant NIC_8192E. This increases readability of the code.

---
 drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 1 -
 drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 1 -
 drivers/staging/rtl8192e/rtl8192e/rtl_pci.c  | 6 +++---
 3 files changed, 3 insertions(+), 5 deletions(-)
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +0 -0
index 2d2f9d4a0ff5..044cab649ff1 100644

drivers/staging/rtl8192e/rtl8192e/rtl_core.c int hwwep = 1; · line 29

Quoted 5 lines
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +0 -1
@@ -26,7 +26,6 @@ int hwwep = 1;
 static char *ifname = "wlan%d";
 
 static const struct rtl819x_ops rtl819xp_ops = {
-	.nic_type			= NIC_8192E,
 };

Delete.

drivers/staging/rtl8192e/rtl8192e/rtl_core.h struct rtl8192_tx_ring { · line 207

Quoted 12 lines
drivers/staging/rtl8192e/rtl8192e/rtl_core.c +0 -0
 static struct pci_device_id rtl8192_pci_id_tbl[] = {
drivers/staging/rtl8192e/rtl8192e/rtl_core.h +0 -1
index fa72f8891409..f75cc96052d9 100644
@@ -204,7 +204,6 @@ struct rtl8192_tx_ring {
 };
 
 struct rtl819x_ops {
-	enum nic_t nic_type;
 };

Delete this empty struct too.

Otherwise these patches are really nice. Thanks!

regards,
dan carpenter