Skip to contentSkip to conversation

net: dsa: mv88e6xxx: Add RGMII delay to 88E6320

PATCH Applied Fabio Estevam 3 participants 3 messages Oct 28, 2022 – Nov 1, 2022

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 net: dsa: mv88e6xxx: Add RGMII delay to 88E6320

From: Steffen Bätz <[email protected]>

Currently, the .port_set_rgmii_delay hook is missing for the 88E6320 family, which causes failure to retrieve an IP address via DHCP.

Add mv88e6320_port_set_rgmii_delay() that allows applying the RGMII delay for ports 2, 5, and 6, which are the only ports that can be used in RGMII mode.

Tested on a custom i.MX8MN board connected to an 88E6320 switch.

This change also applies safely to the 88E6321 variant.

The only difference between 88E6320 versus 88E6321 is the temperature grade and pinout.

They share exactly the same MDIO register map for ports 2, 5, and 6, which are the only ports that can be used in RGMII mode.

[fabio: Improved commit log and extended it to mv88e6321_ops]

---
Changes since v2:
- Add .port_set_rgmii_delay to mv88e6321_ops as well (Andrew). Changes since v1:
- Improve the commit log by saying that change is also valid for the 88E631 chip. (Andrew).

 drivers/net/dsa/mv88e6xxx/chip.c | 2 ++
 drivers/net/dsa/mv88e6xxx/port.c | 9 +++++++++
 drivers/net/dsa/mv88e6xxx/port.h | 2 ++
 3 files changed, 13 insertions(+)
drivers/net/dsa/mv88e6xxx/chip.c +2 -0
index 2479be3a1e35..bf34c942db99 100644
@@ -5029,6 +5029,7 @@ static const struct mv88e6xxx_ops mv88e6320_ops = {
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_sync_link = mv88e6xxx_port_sync_link,
+	.port_set_rgmii_delay = mv88e6320_port_set_rgmii_delay,
 	.port_set_speed_duplex = mv88e6185_port_set_speed_duplex,
 	.port_tag_remap = mv88e6095_port_tag_remap,
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
@@ -5073,6 +5074,7 @@ static const struct mv88e6xxx_ops mv88e6321_ops = {
 	.phy_write = mv88e6xxx_g2_smi_phy_write,
 	.port_set_link = mv88e6xxx_port_set_link,
 	.port_sync_link = mv88e6xxx_port_sync_link,
+	.port_set_rgmii_delay = mv88e6320_port_set_rgmii_delay,
 	.port_set_speed_duplex = mv88e6185_port_set_speed_duplex,
 	.port_tag_remap = mv88e6095_port_tag_remap,
 	.port_set_frame_mode = mv88e6351_port_set_frame_mode,
drivers/net/dsa/mv88e6xxx/port.c +9 -0
index 5c4195c635b0..f79cf716c541 100644
@@ -133,6 +133,15 @@ int mv88e6390_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
 	return mv88e6xxx_port_set_rgmii_delay(chip, port, mode);
 }
 
+int mv88e6320_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
+				   phy_interface_t mode)
+{
+	if (port != 2 && port != 5 && port != 6)
+		return -EOPNOTSUPP;
+
+	return mv88e6xxx_port_set_rgmii_delay(chip, port, mode);
+}
+
 int mv88e6xxx_port_set_link(struct mv88e6xxx_chip *chip, int port, int link)
 {
 	u16 reg;
drivers/net/dsa/mv88e6xxx/port.h +2 -0
index cb04243f37c1..aec9d4fd20e3 100644
@@ -332,6 +332,8 @@ int mv88e6xxx_port_wait_bit(struct mv88e6xxx_chip *chip, int port, int reg,
 
 int mv88e6185_port_set_pause(struct mv88e6xxx_chip *chip, int port,
 			     int pause);
+int mv88e6320_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
+				   phy_interface_t mode);
 int mv88e6352_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
 				   phy_interface_t mode);
 int mv88e6390_port_set_rgmii_delay(struct mv88e6xxx_chip *chip, int port,
Signature · 1 line
2.25.1
maintainer Reviewed-by on v3 1/1
#1 lore raw
Quoted 16 lines · Fabio Estevam

From: Steffen Bätz <[email protected]>

Currently, the .port_set_rgmii_delay hook is missing for the 88E6320 family, which causes failure to retrieve an IP address via DHCP.

Add mv88e6320_port_set_rgmii_delay() that allows applying the RGMII delay for ports 2, 5, and 6, which are the only ports that can be used in RGMII mode.

Tested on a custom i.MX8MN board connected to an 88E6320 switch.

This change also applies safely to the 88E6321 variant.

The only difference between 88E6320 versus 88E6321 is the temperature grade and pinout.

Quoted 6 lines

They share exactly the same MDIO register map for ports 2, 5, and 6, which are the only ports that can be used in RGMII mode.

[fabio: Improved commit log and extended it to mv88e6321_ops]

Andrew

#2 lore raw
In reply to Fabio Estevam
This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net-next.git (master) by Jakub Kicinski <[email protected]>:

Quoted 10 lines · On Fri, 28 Oct 2022 13:31:58 -0300 you wrote:

From: Steffen Bätz <[email protected]>

Currently, the .port_set_rgmii_delay hook is missing for the 88E6320 family, which causes failure to retrieve an IP address via DHCP.

Add mv88e6320_port_set_rgmii_delay() that allows applying the RGMII delay for ports 2, 5, and 6, which are the only ports that can be used in RGMII mode.

[...]

Here is the summary with links:
- [v3,net-next] net: dsa: mv88e6xxx: Add RGMII delay to 88E6320

    https://git.kernel.org/netdev/net-next/c/91e87045a5ef

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html