drm/vc4: hdmi: Fix CEC access while disabled
Subsystems (3)
v3 cover drm/vc4: hdmi: Fix CEC access while disabled
Hi,
This series aims at fixing a complete and silent hang when one tries to use CEC while the display output is off.
This can be tested with:
echo off > /sys/class/drm/card0-HDMI-A-1/status
cec-ctl --tuner -p 1.0.0.0
cec-compliance
This series addresses it by making sure the HDMI controller is powered up as soon as the CEC device is opened by the userspace.
Let me know what you think,
Maxime
Changes from v2:
- Rebased on top of drm-misc-fixes
- Fixed a build error
Changes from v1:
- More fixes
- Added a big warning if we try to access a register while the device is disabled.
- Fixed the pre_crtc_configure error path
Maxime Ripard (6):
drm/vc4: select PM
drm/vc4: hdmi: Make sure the controller is powered up during bind drm/vc4: hdmi: Rework the pre_crtc_configure error handling drm/vc4: hdmi: Split the CEC disable / enable functions in two drm/vc4: hdmi: Make sure the device is powered with CEC drm/vc4: hdmi: Warn if we access the controller while disabled
drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 125 ++++++++++++++++++---------- drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 6 ++ 3 files changed, 90 insertions(+), 42 deletions(-)
Signature · 1 line
2.31.1
PATCH v3 1/6 drm/vc4: select PM
We already depend on runtime PM to get the power domains and clocks for most of the devices supported by the vc4 driver, so let's just select it to make sure it's there, and remove the ifdef.
--- drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)
drivers/gpu/drm/vc4/Kconfig +1 -0
@@ -9,6 +9,7 @@ config DRM_VC4 select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER select DRM_PANEL_BRIDGE + select PM select SND_PCM select SND_PCM_ELD select SND_SOC_GENERIC_DMAENGINE_PCM
drivers/gpu/drm/vc4/vc4_hdmi.c +0 -2
@@ -2107,7 +2107,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)return 0 ; } -#ifdef CONFIG_PM static int vc4_hdmi_runtime_suspend (struct device *dev) {struct vc4_hdmi *vc4_hdmi =dev_get_drvdata (dev);
@@ -2128,7 +2127,6 @@ static int vc4_hdmi_runtime_resume(struct device *dev)return 0 ; } -#endif static int vc4_hdmi_bind (struct device *dev,struct device *master,void *data) {
Signature · 1 line
2.31.1
Re: [PATCH v3 1/6] drm/vc4: select PM
Quoted 6 lines · Maxime Ripard
We already depend on runtime PM to get the power domains and clocks for most of the devices supported by the vc4 driver, so let's just select it to make sure it's there, and remove the ifdef.
Signed-off-by Maxime Ripard <[email protected]>
Quoted 40 lines
--- drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)drivers/gpu/drm/vc4/Kconfig +1
-0@@ -9,6 +9,7 @@ config DRM_VC4 select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER select DRM_PANEL_BRIDGE + select PM select SND_PCM select SND_PCM_ELD select SND_SOC_GENERIC_DMAENGINE_PCMdrivers/gpu/drm/vc4/vc4_hdmi.c +0
-3@@ -2107,7 +2107,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)return 0 ; } -#ifdef CONFIG_PM static int vc4_hdmi_runtime_suspend (struct device *dev) {struct vc4_hdmi *vc4_hdmi =dev_get_drvdata (dev);@@ -2128,7 +2127,6 @@ static int vc4_hdmi_runtime_resume(struct device *dev)return 0 ; } -#endif static int vc4_hdmi_bind (struct device *dev,struct device *master,void *data) { --2.31.1
Re: [PATCH v3 1/6] drm/vc4: select PM (openrisc)
In reply to Maxime RipardQuoted 36 lines · Maxime Ripard
We already depend on runtime PM to get the power domains and clocks for most of the devices supported by the vc4 driver, so let's just select it to make sure it's there, and remove the ifdef.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)drivers/gpu/drm/vc4/Kconfig +1
-0@@ -9,6 +9,7 @@ config DRM_VC4 select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER select DRM_PANEL_BRIDGE + select PM select SND_PCM select SND_PCM_ELD select SND_SOC_GENERIC_DMAENGINE_PCMdrivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2107,7 +2107,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)return 0 ; } -#ifdef CONFIG_PM static int vc4_hdmi_runtime_suspend (struct device *dev) {struct vc4_hdmi *vc4_hdmi =dev_get_drvdata (dev);
drivers/gpu/drm/vc4/vc4_hdmi.c static int vc4_hdmi_runtime_resume(struct device *dev) · line 2132
Quoted 7 lines
drivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2128,7 +2127,6 @@ static int vc4_hdmi_runtime_resume(struct device *dev)return 0 ; } -#endif static int vc4_hdmi_bind (struct device *dev,struct device *master,void *data) {
Hi,
FYI.
This still causes a build error on arch/openrisc/ since it does not support CONFIG_PM (it does not source "kernel/power/Kconfig" like some other arches do):
./arch/riscv/Kconfig:source "kernel/power/Kconfig" ./arch/x86/Kconfig:source "kernel/power/Kconfig" ./arch/nds32/Kconfig:source "kernel/power/Kconfig" ./arch/sh/Kconfig:source "kernel/power/Kconfig" ./arch/arc/Kconfig:source "kernel/power/Kconfig" ./arch/arm64/Kconfig:source "kernel/power/Kconfig" ./arch/xtensa/Kconfig:source "kernel/power/Kconfig" ./arch/sparc/Kconfig:source "kernel/power/Kconfig" ./arch/arm/Kconfig:source "kernel/power/Kconfig" ./arch/mips/Kconfig:source "kernel/power/Kconfig" ./arch/powerpc/Kconfig:source "kernel/power/Kconfig" ./arch/um/Kconfig:source "kernel/power/Kconfig" ./arch/ia64/Kconfig:source "kernel/power/Kconfig"
so withCONFIG_DRM_VC4=y
# CONFIG_DRM_VC4_HDMI_CEC is not set
I still see../drivers/gpu/drm/vc4/vc4_hdmi.c:2139:12: warning: 'vc4_hdmi_runtime_suspend' defined but not used [-Wunused-function]
2139 | static int vc4_hdmi_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signature · 1 line
~Randy
Re: [PATCH v3 1/6] drm/vc4: select PM (openrisc)
Hi Randy,
Quoted 63 lines · Randy Dunlap
Quoted 34 lines · Maxime Ripard
We already depend on runtime PM to get the power domains and clocks for most of the devices supported by the vc4 driver, so let's just select it to make sure it's there, and remove the ifdef.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)drivers/gpu/drm/vc4/Kconfig +1
-0@@ -9,6 +9,7 @@ config DRM_VC4 select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER select DRM_PANEL_BRIDGE + select PM select SND_PCM select SND_PCM_ELD select SND_SOC_GENERIC_DMAENGINE_PCMdrivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2107,7 +2107,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)return 0 ; } -#ifdef CONFIG_PM static int vc4_hdmi_runtime_suspend (struct device *dev) {struct vc4_hdmi *vc4_hdmi =dev_get_drvdata (dev);drivers/gpu/drm/vc4/vc4_hdmi.c static int vc4_hdmi_runtime_resume(struct device *dev) · line 2131
Quoted 6 lines
drivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2128,7 +2127,6 @@ static int vc4_hdmi_runtime_resume(struct device *dev)return 0 ; } -#endif static int vc4_hdmi_bind (struct device *dev,struct device *master,void *data) {Hi,
FYI.
This still causes a build error on
arch/openrisc/since it does not supportCONFIG_PM(it does not source "kernel/power/Kconfig" like some other arches do):./arch/riscv/Kconfig:source "
kernel/power/Kconfig" ./arch/x86/Kconfig:source "kernel/power/Kconfig" ./arch/nds32/Kconfig:source "kernel/power/Kconfig" ./arch/sh/Kconfig:source "kernel/power/Kconfig" ./arch/arc/Kconfig:source "kernel/power/Kconfig" ./arch/arm64/Kconfig:source "kernel/power/Kconfig" ./arch/xtensa/Kconfig:source "kernel/power/Kconfig" ./arch/sparc/Kconfig:source "kernel/power/Kconfig" ./arch/arm/Kconfig:source "kernel/power/Kconfig" ./arch/mips/Kconfig:source "kernel/power/Kconfig" ./arch/powerpc/Kconfig:source "kernel/power/Kconfig" ./arch/um/Kconfig:source "kernel/power/Kconfig" ./arch/ia64/Kconfig:source "kernel/power/Kconfig"
Quoted 8 lines
so with
CONFIG_DRM_VC4=y
#CONFIG_DRM_VC4_HDMI_CECis not setI still see
../drivers/gpu/drm/vc4/vc4_hdmi.c:2139:12: warning: 'vc4_hdmi_runtime_suspend' defined but not used [-Wunused-function]
2139 | static intvc4_hdmi_runtime_suspend(struct device *dev)| ^~~~~~~~~~~~~~~~~~~~~~~~
With what version did you get that build error? -rc2 shouldn't have it anymore since the runtime_pm hooks introduction got reverted.
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20210922/5e558339/attachment.sig>
Re: [PATCH v3 1/6] drm/vc4: select PM (openrisc)
Quoted 70 lines · Maxime Ripard
Hi Randy,
Quoted 67 lines · Randy Dunlap
Quoted 34 lines · Maxime Ripard
We already depend on runtime PM to get the power domains and clocks for most of the devices supported by the vc4 driver, so let's just select it to make sure it's there, and remove the ifdef.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)drivers/gpu/drm/vc4/Kconfig +1
-0@@ -9,6 +9,7 @@ config DRM_VC4 select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER select DRM_PANEL_BRIDGE + select PM select SND_PCM select SND_PCM_ELD select SND_SOC_GENERIC_DMAENGINE_PCMdrivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2107,7 +2107,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)return 0 ; } -#ifdef CONFIG_PM static int vc4_hdmi_runtime_suspend (struct device *dev) {struct vc4_hdmi *vc4_hdmi =dev_get_drvdata (dev);drivers/gpu/drm/vc4/vc4_hdmi.c static int vc4_hdmi_runtime_resume(struct device *dev) · line 2131
Quoted 6 lines
drivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2128,7 +2127,6 @@ static int vc4_hdmi_runtime_resume(struct device *dev)return 0 ; } -#endif static int vc4_hdmi_bind (struct device *dev,struct device *master,void *data) {Hi,
FYI.
This still causes a build error on
arch/openrisc/since it does not supportCONFIG_PM(it does not source "kernel/power/Kconfig" like some other arches do):./arch/riscv/Kconfig:source "
kernel/power/Kconfig" ./arch/x86/Kconfig:source "kernel/power/Kconfig" ./arch/nds32/Kconfig:source "kernel/power/Kconfig" ./arch/sh/Kconfig:source "kernel/power/Kconfig" ./arch/arc/Kconfig:source "kernel/power/Kconfig" ./arch/arm64/Kconfig:source "kernel/power/Kconfig" ./arch/xtensa/Kconfig:source "kernel/power/Kconfig" ./arch/sparc/Kconfig:source "kernel/power/Kconfig" ./arch/arm/Kconfig:source "kernel/power/Kconfig" ./arch/mips/Kconfig:source "kernel/power/Kconfig" ./arch/powerpc/Kconfig:source "kernel/power/Kconfig" ./arch/um/Kconfig:source "kernel/power/Kconfig" ./arch/ia64/Kconfig:source "kernel/power/Kconfig"so with
CONFIG_DRM_VC4=y
#CONFIG_DRM_VC4_HDMI_CECis not set
Quoted 7 lines
Quoted 4 lines
I still see
../drivers/gpu/drm/vc4/vc4_hdmi.c:2139:12: warning: 'vc4_hdmi_runtime_suspend' defined but not used [-Wunused-function]
2139 | static intvc4_hdmi_runtime_suspend(struct device *dev)| ^~~~~~~~~~~~~~~~~~~~~~~~With what version did you get that build error? -rc2 shouldn't have it anymore since the
runtime_pmhooks introduction got reverted.
-next still contains these patches as Stephen effectively reverted the changes in Linus' tree when merging in the drm-misc-fixes tree:
https://lore.kernel.org/r/20210920090729.19458953 at canb.auug.org.au/
Cheers,
Nathan
Re: [PATCH v3 1/6] drm/vc4: select PM (openrisc)
Hi Nathan,
Quoted 76 lines · Nathan Chancellor
Quoted 75 lines · Maxime Ripard
Hi Randy,
Quoted 71 lines · Randy Dunlap
Quoted 34 lines · Maxime Ripard
We already depend on runtime PM to get the power domains and clocks for most of the devices supported by the vc4 driver, so let's just select it to make sure it's there, and remove the ifdef.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)drivers/gpu/drm/vc4/Kconfig +1
-0@@ -9,6 +9,7 @@ config DRM_VC4 select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER select DRM_PANEL_BRIDGE + select PM select SND_PCM select SND_PCM_ELD select SND_SOC_GENERIC_DMAENGINE_PCMdrivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2107,7 +2107,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)return 0 ; } -#ifdef CONFIG_PM static int vc4_hdmi_runtime_suspend (struct device *dev) {struct vc4_hdmi *vc4_hdmi =dev_get_drvdata (dev);drivers/gpu/drm/vc4/vc4_hdmi.c static int vc4_hdmi_runtime_resume(struct device *dev) · line 2131
Quoted 6 lines
drivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2128,7 +2127,6 @@ static int vc4_hdmi_runtime_resume(struct device *dev)return 0 ; } -#endif static int vc4_hdmi_bind (struct device *dev,struct device *master,void *data) {Hi,
FYI.
This still causes a build error on
arch/openrisc/since it does not supportCONFIG_PM(it does not source "kernel/power/Kconfig" like some other arches do):./arch/riscv/Kconfig:source "
kernel/power/Kconfig" ./arch/x86/Kconfig:source "kernel/power/Kconfig" ./arch/nds32/Kconfig:source "kernel/power/Kconfig" ./arch/sh/Kconfig:source "kernel/power/Kconfig" ./arch/arc/Kconfig:source "kernel/power/Kconfig" ./arch/arm64/Kconfig:source "kernel/power/Kconfig" ./arch/xtensa/Kconfig:source "kernel/power/Kconfig" ./arch/sparc/Kconfig:source "kernel/power/Kconfig" ./arch/arm/Kconfig:source "kernel/power/Kconfig" ./arch/mips/Kconfig:source "kernel/power/Kconfig" ./arch/powerpc/Kconfig:source "kernel/power/Kconfig" ./arch/um/Kconfig:source "kernel/power/Kconfig" ./arch/ia64/Kconfig:source "kernel/power/Kconfig"so with
CONFIG_DRM_VC4=y
#CONFIG_DRM_VC4_HDMI_CECis not setI still see
../drivers/gpu/drm/vc4/vc4_hdmi.c:2139:12: warning: 'vc4_hdmi_runtime_suspend' defined but not used [-Wunused-function]
2139 | static intvc4_hdmi_runtime_suspend(struct device *dev)| ^~~~~~~~~~~~~~~~~~~~~~~~
Quoted 7 lines
Quoted 2 lines
With what version did you get that build error? -rc2 shouldn't have it anymore since the
runtime_pmhooks introduction got reverted.-next still contains these patches as Stephen effectively reverted the changes in Linus' tree when merging in the drm-misc-fixes tree:
https://lore.kernel.org/r/20210920090729.19458953 at canb.auug.org.au/
Ah, indeed, thanks.
What's the typical fix for these errors?
I guess adding a depends on ARM || ARM64 || COMPILE_TEST would work?
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20210923/67e24063/attachment.sig>
Re: [PATCH v3 1/6] drm/vc4: select PM (openrisc)
Quoted 85 lines · Maxime Ripard
Hi Nathan,
Quoted 82 lines · Nathan Chancellor
Quoted 70 lines · Maxime Ripard
Hi Randy,
Quoted 67 lines · Randy Dunlap
Quoted 34 lines · Maxime Ripard
We already depend on runtime PM to get the power domains and clocks for most of the devices supported by the vc4 driver, so let's just select it to make sure it's there, and remove the ifdef.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)drivers/gpu/drm/vc4/Kconfig +1
-0@@ -9,6 +9,7 @@ config DRM_VC4 select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER select DRM_PANEL_BRIDGE + select PM select SND_PCM select SND_PCM_ELD select SND_SOC_GENERIC_DMAENGINE_PCMdrivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2107,7 +2107,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)return 0 ; } -#ifdef CONFIG_PM static int vc4_hdmi_runtime_suspend (struct device *dev) {struct vc4_hdmi *vc4_hdmi =dev_get_drvdata (dev);drivers/gpu/drm/vc4/vc4_hdmi.c static int vc4_hdmi_runtime_resume(struct device *dev) · line 2131
Quoted 6 lines
drivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2128,7 +2127,6 @@ static int vc4_hdmi_runtime_resume(struct device *dev)return 0 ; } -#endif static int vc4_hdmi_bind (struct device *dev,struct device *master,void *data) {Hi,
FYI.
This still causes a build error on
arch/openrisc/since it does not supportCONFIG_PM(it does not source "kernel/power/Kconfig" like some other arches do):./arch/riscv/Kconfig:source "
kernel/power/Kconfig" ./arch/x86/Kconfig:source "kernel/power/Kconfig" ./arch/nds32/Kconfig:source "kernel/power/Kconfig" ./arch/sh/Kconfig:source "kernel/power/Kconfig" ./arch/arc/Kconfig:source "kernel/power/Kconfig" ./arch/arm64/Kconfig:source "kernel/power/Kconfig" ./arch/xtensa/Kconfig:source "kernel/power/Kconfig" ./arch/sparc/Kconfig:source "kernel/power/Kconfig" ./arch/arm/Kconfig:source "kernel/power/Kconfig" ./arch/mips/Kconfig:source "kernel/power/Kconfig" ./arch/powerpc/Kconfig:source "kernel/power/Kconfig" ./arch/um/Kconfig:source "kernel/power/Kconfig" ./arch/ia64/Kconfig:source "kernel/power/Kconfig"so with
CONFIG_DRM_VC4=y
#CONFIG_DRM_VC4_HDMI_CECis not setQuoted 7 lines
Quoted 4 lines
I still see
../drivers/gpu/drm/vc4/vc4_hdmi.c:2139:12: warning: 'vc4_hdmi_runtime_suspend' defined but not used [-Wunused-function]
2139 | static intvc4_hdmi_runtime_suspend(struct device *dev)| ^~~~~~~~~~~~~~~~~~~~~~~~With what version did you get that build error? -rc2 shouldn't have it anymore since the
runtime_pmhooks introduction got reverted.-next still contains these patches as Stephen effectively reverted the changes in Linus' tree when merging in the drm-misc-fixes tree:
Quoted 7 lines
Quoted 1 line
https://lore.kernel.org/r/20210920090729.19458953 at canb.auug.org.au/
Ah, indeed, thanks.
What's the typical fix for these errors?
I guess adding a depends on ARM || ARM64 ||
COMPILE_TESTwould work?
I think the typical fix from most people is marking these functions as __maybe_unused so that they are always defined but the compiler does not warn. An alternative would be changing the "select PM" to be "depends on PM" I believe but that is less frequent.
Cheers,
Nathan
Re: [PATCH v3 1/6] drm/vc4: select PM (openrisc)
Quoted 90 lines · Nathan Chancellor
Quoted 89 lines · Maxime Ripard
Hi Nathan,
Quoted 76 lines · Nathan Chancellor
Quoted 75 lines · Maxime Ripard
Hi Randy,
Quoted 71 lines · Randy Dunlap
Quoted 34 lines · Maxime Ripard
We already depend on runtime PM to get the power domains and clocks for most of the devices supported by the vc4 driver, so let's just select it to make sure it's there, and remove the ifdef.
Signed-off-by Maxime Ripard <[email protected]>--- drivers/gpu/drm/vc4/Kconfig | 1 + drivers/gpu/drm/vc4/vc4_hdmi.c | 2 -- 2 files changed, 1 insertion(+), 2 deletions(-)drivers/gpu/drm/vc4/Kconfig +1
-0@@ -9,6 +9,7 @@ config DRM_VC4 select DRM_KMS_CMA_HELPER select DRM_GEM_CMA_HELPER select DRM_PANEL_BRIDGE + select PM select SND_PCM select SND_PCM_ELD select SND_SOC_GENERIC_DMAENGINE_PCMdrivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2107,7 +2107,6 @@ static int vc5_hdmi_init_resources(struct vc4_hdmi *vc4_hdmi)return 0 ; } -#ifdef CONFIG_PM static int vc4_hdmi_runtime_suspend (struct device *dev) {struct vc4_hdmi *vc4_hdmi =dev_get_drvdata (dev);drivers/gpu/drm/vc4/vc4_hdmi.c static int vc4_hdmi_runtime_resume(struct device *dev) · line 2131
Quoted 6 lines
drivers/gpu/drm/vc4/vc4_hdmi.c +0
-1@@ -2128,7 +2127,6 @@ static int vc4_hdmi_runtime_resume(struct device *dev)return 0 ; } -#endif static int vc4_hdmi_bind (struct device *dev,struct device *master,void *data) {Hi,
FYI.
This still causes a build error on
arch/openrisc/since it does not supportCONFIG_PM(it does not source "kernel/power/Kconfig" like some other arches do):./arch/riscv/Kconfig:source "
kernel/power/Kconfig" ./arch/x86/Kconfig:source "kernel/power/Kconfig" ./arch/nds32/Kconfig:source "kernel/power/Kconfig" ./arch/sh/Kconfig:source "kernel/power/Kconfig" ./arch/arc/Kconfig:source "kernel/power/Kconfig" ./arch/arm64/Kconfig:source "kernel/power/Kconfig" ./arch/xtensa/Kconfig:source "kernel/power/Kconfig" ./arch/sparc/Kconfig:source "kernel/power/Kconfig" ./arch/arm/Kconfig:source "kernel/power/Kconfig" ./arch/mips/Kconfig:source "kernel/power/Kconfig" ./arch/powerpc/Kconfig:source "kernel/power/Kconfig" ./arch/um/Kconfig:source "kernel/power/Kconfig" ./arch/ia64/Kconfig:source "kernel/power/Kconfig"so with
CONFIG_DRM_VC4=y
#CONFIG_DRM_VC4_HDMI_CECis not setI still see
../drivers/gpu/drm/vc4/vc4_hdmi.c:2139:12: warning: 'vc4_hdmi_runtime_suspend' defined but not used [-Wunused-function]
2139 | static intvc4_hdmi_runtime_suspend(struct device *dev)| ^~~~~~~~~~~~~~~~~~~~~~~~Quoted 7 lines
Quoted 2 lines
With what version did you get that build error? -rc2 shouldn't have it anymore since the
runtime_pmhooks introduction got reverted.-next still contains these patches as Stephen effectively reverted the changes in Linus' tree when merging in the drm-misc-fixes tree:
https://lore.kernel.org/r/20210920090729.19458953 at canb.auug.org.au/
Ah, indeed, thanks.
Quoted 8 lines
Quoted 3 lines
What's the typical fix for these errors?
I guess adding a depends on ARM || ARM64 ||
COMPILE_TESTwould work?I think the typical fix from most people is marking these functions as
__maybe_unusedso that they are always defined but the compiler does not warn. An alternative would be changing the "select PM" to be "depends on PM" I believe but that is less frequent.
Thanks for the suggestion. Since those functions are always going to be used anyway (but on COMPILE_TEST), I've chosen the opposite approach of dropping SET_RUNTIME_PM_OPS instead. You're in CC of that patch so feel free to comment there if you think this is wrong.
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.librecores.org/pipermail/openrisc/attachments/20210923/524a61a6/attachment.sig>
PATCH v3 2/6 drm/vc4: hdmi: Make sure the controller is powered up during bind
In reply to Maxime RipardIn the bind hook, we actually need the device to have the HSM clock running during the final part of the display initialisation where we reset the controller and initialise the CEC component.
Failing to do so will result in a complete, silent, hang of the CPU.
--- drivers/gpu/drm/vc4/vc4_hdmi.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-)
drivers/gpu/drm/vc4/vc4_hdmi.c +15 -2
@@ -2191,6 +2191,18 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) vc4_hdmi->disable_4kp60 = true; } +/* +* We need to have the device powered up at this point to call +* our reset hook and for the CEC init. +*/ + ret =vc4_hdmi_runtime_resume (dev); +if (ret) + goto err_put_ddc; + +pm_runtime_get_noresume (dev); +pm_runtime_set_active (dev); +pm_runtime_enable (dev); +if (vc4_hdmi->variant->reset) vc4_hdmi->variant->reset (vc4_hdmi);
@@ -2202,8 +2214,6 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)clk_prepare_enable (vc4_hdmi->pixel_bvb_clock); } -pm_runtime_enable (dev); -drm_simple_encoder_init (drm, encoder,DRM_MODE_ENCODER_TMDS );drm_encoder_helper_add (encoder, &vc4_hdmi_encoder_helper_funcs);
@@ -2223,6 +2233,8 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) vc4_hdmi_debugfs_regs, vc4_hdmi); +pm_runtime_put_sync (dev); +return 0 ; err_free_cec:
@@ -2231,6 +2243,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data)vc4_hdmi_connector_destroy (&vc4_hdmi->connector); err_destroy_encoder:drm_encoder_cleanup (encoder); +pm_runtime_put_sync (dev);pm_runtime_disable (dev); err_put_ddc:put_device (&vc4_hdmi->ddc->dev);
Signature · 1 line
2.31.1
PATCH v3 3/6 drm/vc4: hdmi: Rework the pre_crtc_configure error handling
In reply to Maxime RipardSince our pre_crtc_configure hook returned void, we didn't implement a goto-based error path handling, leading to errors like failing to put back the device in pm_runtime in all the error paths, but also failing to disable the pixel clock if clk_set_min_rate on the HSM clock fails.
Move to a goto-based implementation to have an easier consitency.
--- drivers/gpu/drm/vc4/vc4_hdmi.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
drivers/gpu/drm/vc4/vc4_hdmi.c +14 -7
@@ -913,13 +913,13 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder, ret =clk_set_rate (vc4_hdmi->pixel_clock, pixel_rate);if (ret) {DRM_ERROR ("Failed to set pixel clock rate: %d\n" , ret); -return ; + goto err_put_runtime_pm; } ret =clk_prepare_enable (vc4_hdmi->pixel_clock);if (ret) {DRM_ERROR ("Failed to turn on pixel clock: %d\n" , ret); -return ; + goto err_put_runtime_pm; }/*
@@ -942,7 +942,7 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder, ret =clk_set_min_rate (vc4_hdmi->hsm_clock, hsm_rate);if (ret) {DRM_ERROR ("Failed to set HSM clock rate: %d\n" , ret); -return ; + goto err_disable_pixel_clock; }vc4_hdmi_cec_update_clk_div (vc4_hdmi);
@@ -957,15 +957,13 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder, ret =clk_set_min_rate (vc4_hdmi->pixel_bvb_clock, bvb_rate);if (ret) {DRM_ERROR ("Failed to set pixel bvb clock rate: %d\n" , ret); -clk_disable_unprepare (vc4_hdmi->pixel_clock); -return ; + goto err_disable_pixel_clock; } ret =clk_prepare_enable (vc4_hdmi->pixel_bvb_clock);if (ret) {DRM_ERROR ("Failed to turn on pixel bvb clock: %d\n" , ret); -clk_disable_unprepare (vc4_hdmi->pixel_clock); -return ; + goto err_disable_pixel_clock; }if (vc4_hdmi->variant->phy_init)
@@ -978,6 +976,15 @@ static void vc4_hdmi_encoder_pre_crtc_configure(struct drm_encoder *encoder,if (vc4_hdmi->variant->set_timings) vc4_hdmi->variant->set_timings (vc4_hdmi, conn_state, mode); + +return ; + +err_disable_pixel_clock: +clk_disable_unprepare (vc4_hdmi->pixel_clock); +err_put_runtime_pm: +pm_runtime_put (&vc4_hdmi->pdev->dev); + +return ; } static void vc4_hdmi_encoder_pre_crtc_enable(struct drm_encoder *encoder,
Signature · 1 line
2.31.1
PATCH v3 4/6 drm/vc4: hdmi: Split the CEC disable / enable functions in two
In reply to Maxime RipardIn order to ease further additions to the CEC enable and disable, let's split the function into two functions, one to enable and the other to disable.
--- drivers/gpu/drm/vc4/vc4_hdmi.c | 73 ++++++++++++++++++++-------------- 1 file changed, 44 insertions(+), 29 deletions(-)
drivers/gpu/drm/vc4/vc4_hdmi.c +44 -29
@@ -1740,7 +1740,7 @@ static irqreturn_t vc4_cec_irq_handler(int irq, void *priv)return ret; } -static int vc4_hdmi_cec_adap_enable (struct cec_adapter *adap,bool enable) +static int vc4_hdmi_cec_enable (struct cec_adapter *adap) {struct vc4_hdmi *vc4_hdmi =cec_get_drvdata (adap);/* clock period in microseconds */
@@ -1753,38 +1753,53 @@ static int vc4_hdmi_cec_adap_enable(struct cec_adapter *adap, bool enable) val |= ((4700 / usecs) <<VC4_HDMI_CEC_CNT_TO_4700_US_SHIFT ) | ((4500 / usecs) <<VC4_HDMI_CEC_CNT_TO_4500_US_SHIFT ); -if (enable) { -HDMI_WRITE (HDMI_CEC_CNTRL_5 , val | -VC4_HDMI_CEC_TX_SW_RESET |VC4_HDMI_CEC_RX_SW_RESET ); -HDMI_WRITE (HDMI_CEC_CNTRL_5 , val); -HDMI_WRITE (HDMI_CEC_CNTRL_2 , - ((1500 / usecs) <<VC4_HDMI_CEC_CNT_TO_1500_US_SHIFT ) | - ((1300 / usecs) <<VC4_HDMI_CEC_CNT_TO_1300_US_SHIFT ) | - ((800 / usecs) <<VC4_HDMI_CEC_CNT_TO_800_US_SHIFT ) | - ((600 / usecs) <<VC4_HDMI_CEC_CNT_TO_600_US_SHIFT ) | - ((400 / usecs) <<VC4_HDMI_CEC_CNT_TO_400_US_SHIFT )); -HDMI_WRITE (HDMI_CEC_CNTRL_3 , - ((2750 / usecs) <<VC4_HDMI_CEC_CNT_TO_2750_US_SHIFT ) | - ((2400 / usecs) <<VC4_HDMI_CEC_CNT_TO_2400_US_SHIFT ) | - ((2050 / usecs) <<VC4_HDMI_CEC_CNT_TO_2050_US_SHIFT ) | - ((1700 / usecs) <<VC4_HDMI_CEC_CNT_TO_1700_US_SHIFT )); -HDMI_WRITE (HDMI_CEC_CNTRL_4 , - ((4300 / usecs) <<VC4_HDMI_CEC_CNT_TO_4300_US_SHIFT ) | - ((3900 / usecs) <<VC4_HDMI_CEC_CNT_TO_3900_US_SHIFT ) | - ((3600 / usecs) <<VC4_HDMI_CEC_CNT_TO_3600_US_SHIFT ) | - ((3500 / usecs) <<VC4_HDMI_CEC_CNT_TO_3500_US_SHIFT )); +HDMI_WRITE (HDMI_CEC_CNTRL_5 , val | +VC4_HDMI_CEC_TX_SW_RESET |VC4_HDMI_CEC_RX_SW_RESET ); +HDMI_WRITE (HDMI_CEC_CNTRL_5 , val); +HDMI_WRITE (HDMI_CEC_CNTRL_2 , + ((1500 / usecs) <<VC4_HDMI_CEC_CNT_TO_1500_US_SHIFT ) | + ((1300 / usecs) <<VC4_HDMI_CEC_CNT_TO_1300_US_SHIFT ) | + ((800 / usecs) <<VC4_HDMI_CEC_CNT_TO_800_US_SHIFT ) | + ((600 / usecs) <<VC4_HDMI_CEC_CNT_TO_600_US_SHIFT ) | + ((400 / usecs) <<VC4_HDMI_CEC_CNT_TO_400_US_SHIFT )); +HDMI_WRITE (HDMI_CEC_CNTRL_3 , + ((2750 / usecs) <<VC4_HDMI_CEC_CNT_TO_2750_US_SHIFT ) | + ((2400 / usecs) <<VC4_HDMI_CEC_CNT_TO_2400_US_SHIFT ) | + ((2050 / usecs) <<VC4_HDMI_CEC_CNT_TO_2050_US_SHIFT ) | + ((1700 / usecs) <<VC4_HDMI_CEC_CNT_TO_1700_US_SHIFT )); +HDMI_WRITE (HDMI_CEC_CNTRL_4 , + ((4300 / usecs) <<VC4_HDMI_CEC_CNT_TO_4300_US_SHIFT ) | + ((3900 / usecs) <<VC4_HDMI_CEC_CNT_TO_3900_US_SHIFT ) | + ((3600 / usecs) <<VC4_HDMI_CEC_CNT_TO_3600_US_SHIFT ) | + ((3500 / usecs) <<VC4_HDMI_CEC_CNT_TO_3500_US_SHIFT )); + +if (!vc4_hdmi->variant->external_irq_controller) +HDMI_WRITE (HDMI_CEC_CPU_MASK_CLEAR ,VC4_HDMI_CPU_CEC ); -if (!vc4_hdmi->variant->external_irq_controller) -HDMI_WRITE (HDMI_CEC_CPU_MASK_CLEAR ,VC4_HDMI_CPU_CEC ); - }else { -if (!vc4_hdmi->variant->external_irq_controller) -HDMI_WRITE (HDMI_CEC_CPU_MASK_SET ,VC4_HDMI_CPU_CEC ); -HDMI_WRITE (HDMI_CEC_CNTRL_5 , val | -VC4_HDMI_CEC_TX_SW_RESET |VC4_HDMI_CEC_RX_SW_RESET ); - }return 0 ; } +static int vc4_hdmi_cec_disable (struct cec_adapter *adap) +{ +struct vc4_hdmi *vc4_hdmi =cec_get_drvdata (adap); + +if (!vc4_hdmi->variant->external_irq_controller) +HDMI_WRITE (HDMI_CEC_CPU_MASK_SET ,VC4_HDMI_CPU_CEC ); + +HDMI_WRITE (HDMI_CEC_CNTRL_5 ,HDMI_READ (HDMI_CEC_CNTRL_5 ) | +VC4_HDMI_CEC_TX_SW_RESET |VC4_HDMI_CEC_RX_SW_RESET ); + +return 0 ; +} + +static int vc4_hdmi_cec_adap_enable (struct cec_adapter *adap,bool enable) +{ +if (enable) +return vc4_hdmi_cec_enable (adap); +else +return vc4_hdmi_cec_disable (adap); +} +static int vc4_hdmi_cec_adap_log_addr (struct cec_adapter *adap,u8 log_addr) {struct vc4_hdmi *vc4_hdmi =cec_get_drvdata (adap);
Signature · 1 line
2.31.1
PATCH v3 5/6 drm/vc4: hdmi: Make sure the device is powered with CEC
In reply to Maxime RipardSimilarly to what we encountered with the detect hook with DRM, nothing actually prevents any of the CEC callback from being run while the HDMI output is disabled.
However, this is an issue since any register access to the controller when it's powered down will result in a silent hang.
Let's make sure we run the runtime_pm hooks when the CEC adapter is opened and closed by the userspace to avoid that issue.
--- drivers/gpu/drm/vc4/vc4_hdmi.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
drivers/gpu/drm/vc4/vc4_hdmi.c +9 -1
@@ -1745,8 +1745,14 @@ static int vc4_hdmi_cec_enable(struct cec_adapter *adap)struct vc4_hdmi *vc4_hdmi =cec_get_drvdata (adap);/* clock period in microseconds */ const u32 usecs =1000000 /CEC_CLOCK_FREQ ; -u32 val =HDMI_READ (HDMI_CEC_CNTRL_5 ); +u32 val; +int ret; + ret =pm_runtime_resume_and_get (&vc4_hdmi->pdev->dev); +if (ret) +return ret; + + val =HDMI_READ (HDMI_CEC_CNTRL_5 ); val &= ~(VC4_HDMI_CEC_TX_SW_RESET |VC4_HDMI_CEC_RX_SW_RESET |VC4_HDMI_CEC_CNT_TO_4700_US_MASK |VC4_HDMI_CEC_CNT_TO_4500_US_MASK );
@@ -1789,6 +1795,8 @@ static int vc4_hdmi_cec_disable(struct cec_adapter *adap)HDMI_WRITE (HDMI_CEC_CNTRL_5 ,HDMI_READ (HDMI_CEC_CNTRL_5 ) |VC4_HDMI_CEC_TX_SW_RESET |VC4_HDMI_CEC_RX_SW_RESET ); +pm_runtime_put (&vc4_hdmi->pdev->dev); +return 0 ; }
Signature · 1 line
2.31.1
PATCH v3 6/6 drm/vc4: hdmi: Warn if we access the controller while disabled
In reply to Maxime RipardWe've had many silent hangs where the kernel would look like it just stalled due to the access to one of the HDMI registers while the controller was disabled.
Add a warning if we're about to do that so that it's at least not silent anymore.
--- drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 6 ++++++ 1 file changed, 6 insertions(+)
drivers/gpu/drm/vc4/vc4_hdmi_regs.h +6 -0
@@ -1,6 +1,8 @@#ifndef _VC4_HDMI_REGS_H_#define _VC4_HDMI_REGS_H_ +#include <linux/pm_runtime.h> +#include "vc4_hdmi.h" #define VC4_HDMI_PACKET_STRIDE 0x24
@@ -412,6 +414,8 @@ static inline u32 vc4_hdmi_read(struct vc4_hdmi *hdmi,const struct vc4_hdmi_variant *variant = hdmi->variant;void __iomem *base; +WARN_ON (!pm_runtime_active (&hdmi->pdev->dev)); +if (reg >= variant->num_registers) {dev_warn (&hdmi->pdev->dev,"Invalid register ID %u\n" , reg);
@@ -438,6 +442,8 @@ static inline void vc4_hdmi_write(struct vc4_hdmi *hdmi,const struct vc4_hdmi_variant *variant = hdmi->variant;void __iomem *base; +WARN_ON (!pm_runtime_active (&hdmi->pdev->dev)); +if (reg >= variant->num_registers) {dev_warn (&hdmi->pdev->dev,"Invalid register ID %u\n" , reg);
Signature · 1 line
2.31.1
Maxime Ripard
AppliedQuoted 5 lines · Maxime Ripard
Hi,
This series aims at fixing a complete and silent hang when one tries to use CEC while the display output is off.
Quoted 8 lines
This can be tested with:
echo off >
/sys/class/drm/card0-HDMI-A-1/status
cec-ctl --tuner -p 1.0.0.0
cec-complianceThis series addresses it by making sure the HDMI controller is powered up as soon as the CEC device is opened by the userspace.
Applied, thanks!
Maxime