arm64: dts: Add i.MX8DXL initial support
Subsystems (5)
v2 cover arm64: dts: Add i.MX8DXL initial support
This allows i.MX8DXL EVK board to boot to prompt.
Changes since v1:
* added commit message for the 8th, 9th and 10th patches
Abel Vesa (5):
arm64: dts: imx8-ss-lsio: Add mu5a mailbox
arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding
dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
Jacky Bai (5):
arm64: dts: freescale: Add the top level dtsi support for imx8dxl
arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl
arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl
arm64: dts: imx8dxl: Add i.MX8DXL evk board support
.../bindings/arm/freescale/fsl,scu.txt | 3 +- .../bindings/i2c/i2c-imx-lpi2c.yaml | 2 + .../bindings/serial/fsl-lpuart.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8-ss-lsio.dtsi | 7 + arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++ .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 53 ++++ .../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 137 +++++++++ .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 36 +++ .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++++ arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 245 ++++++++++++++++ 11 files changed, 828 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
Signature · 1 line
2.31.1
PATCH v2 1/10 arm64: dts: freescale: Add the top level dtsi support for imx8dxl
From: Jacky Bai <[email protected]>
The i.MX8DXL is a device targeting the automotive and industrial market segments. The flexibility of the architecture allows for use in a wide variety of general embedded applications. The chip is designed to achieve both high performance and low power consumption. The chip relies on the power efficient dual (2x) Cortex-A35 cluster.
Add the reserved memory node property for dsp reserved memory, the wakeup-irq property for SCU node, the imx ion, the rpmsg and the cm4 rproc support.
--- arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 245 +++++++++++++++++++++ 1 file changed, 245 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
arch/arm64/boot/dts/freescale/imx8dxl.dtsi new file +245 -0
@@ -0,0 +1,245 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 NXP + */ + +#include <dt-bindings/clock/imx8-clock.h> +#include <dt-bindings/firmware/imx/rsrc.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/pads-imx8dxl.h> +#include <dt-bindings/thermal/thermal.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + ethernet0 = &fec1; + ethernet1 = &eqos; + gpio0 = &lsio_gpio0; + gpio1 = &lsio_gpio1; + gpio2 = &lsio_gpio2; + gpio3 = &lsio_gpio3; + gpio4 = &lsio_gpio4; + gpio5 = &lsio_gpio5; + gpio6 = &lsio_gpio6; + gpio7 = &lsio_gpio7; + i2c2 = &i2c2; + i2c3 = &i2c3; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mu1 = &lsio_mu1; + serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; + }; + + cpus: cpus { + #address-cells = <2>; + #size-cells = <0>; + + /* We have 1 clusters with 2 Cortex-A35 cores */ + A35_0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x0>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; + #cooling-cells = <2>; + operating-points-v2 = <&a35_opp_table>; + }; + + A35_1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a35"; + reg = <0x0 0x1>; + enable-method = "psci"; + next-level-cache = <&A35_L2>; + clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>; + #cooling-cells = <2>; + operating-points-v2 = <&a35_opp_table>; + }; + + A35_L2: l2-cache0 { + compatible = "cache"; + }; + }; + + a35_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-900000000 { + opp-hz = /bits/ 64 <900000000>; + opp-microvolt = <1000000>; + clock-latency-ns = <150000>; + }; + + opp-1200000000 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <1100000>; + clock-latency-ns = <150000>; + opp-suspend; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dsp_reserved: dsp@92400000 { + reg = <0 0x92400000 0 0x2000000>; + no-map; + }; + }; + + gic: interrupt-controller@51a00000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ + <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */ + #interrupt-cells = <3>; + interrupt-controller; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + scu { + compatible = "fsl,imx-scu"; + mbox-names = "tx0", + "rx0", + "gip3"; + mboxes = <&lsio_mu1 0 0 + &lsio_mu1 1 0 + &lsio_mu1 3 3>; + + pd: imx8dxl-pd { + compatible = "fsl,imx8dxl-scu-pd", "fsl,scu-pd"; + #power-domain-cells = <1>; + }; + + clk: clock-controller { + compatible = "fsl,imx8dxl-clk", "fsl,scu-clk"; + #clock-cells = <2>; + clocks = <&xtal32k &xtal24m>; + clock-names = "xtal_32KHz", "xtal_24Mhz"; + }; + + iomuxc: pinctrl { + compatible = "fsl,imx8dxl-iomuxc"; + }; + + ocotp: imx8qx-ocotp { + compatible = "fsl,imx8dxl-scu-ocotp", "fsl,imx8qxp-scu-ocotp"; + #address-cells = <1>; + #size-cells = <1>; + + fec_mac0: mac@2c4 { + reg = <0x2c4 6>; + }; + + fec_mac1: mac@2c6 { + reg = <0x2c6 6>; + }; + }; + + watchdog { + compatible = "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; + + tsens: thermal-sensor { + compatible = "fsl,imx-sc-thermal"; + #thermal-sensor-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */ + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */ + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */ + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */ + }; + + thermal_zones: thermal-zones { + cpu-thermal0 { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tsens IMX_SC_R_SYSTEM>; + + trips { + cpu_alert0: trip0 { + temperature = <107000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit0: trip1 { + temperature = <127000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + clk_dummy: clock-dummy { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "clk_dummy"; + }; + + xtal32k: clock-xtal32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xtal_32KHz"; + }; + + xtal24m: clock-xtal24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xtal_24MHz"; + }; + + sc_pwrkey: sc-powerkey { + compatible = "fsl,imx8-pwrkey"; + linux,keycode = <KEY_POWER>; + wakeup-source; + }; + + /* sorted in register address */ + #include "imx8-ss-adma.dtsi" + #include "imx8-ss-conn.dtsi" + #include "imx8-ss-ddr.dtsi" + #include "imx8-ss-lsio.dtsi" +}; + +#include "imx8dxl-ss-adma.dtsi" +#include "imx8dxl-ss-conn.dtsi" +#include "imx8dxl-ss-lsio.dtsi" +#include "imx8dxl-ss-ddr.dtsi"
Signature · 1 line
2.31.1
PATCH v2 2/10 arm64: dts: imx8-ss-lsio: Add mu5a mailbox
In reply to Abel VesaThe mailbox of the lsio mu5a is used by rpmsg on imx8qxp and imx8dxl platforms.
--- arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi +7 -0
@@ -141,6 +141,13 @@ lsio_mu4: mailbox@5d1f0000 { status = "disabled"; }; + lsio_mu5: mailbox@5d200000 { + reg = <0x5d200000 0x10000>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + power-domains = <&pd IMX_SC_R_MU_5A>; + }; + lsio_mu13: mailbox@5d280000 { reg = <0x5d280000 0x10000>; interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
Signature · 1 line
2.31.1
PATCH v2 3/10 arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
In reply to Abel VesaOverride the I2Cs, LPUARTs, audio_ipg_clk and dma_ipg_clk with the i.MX8DXL specific properties.
--- .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 53 +++++++++++++++++++ 1 file changed, 53 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi new file +53 -0
@@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 NXP + */ + +&audio_ipg_clk { + clock-frequency = <160000000>; +}; + +&dma_ipg_clk { + clock-frequency = <160000000>; +}; + +&i2c0 { + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c1 { + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c2 { + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c3 { + compatible = "fsl,imx8dxl-lpi2c", "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c"; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpuart0 { + compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpuart1 { + compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpuart2 { + compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = <GIC_SPI 230 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lpuart3 { + compatible = "fsl,imx8dxl-lpuart", "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart"; + interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>; +}; +
Signature · 1 line
2.31.1
PATCH v2 4/10 arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
In reply to Abel VesaFrom: Jacky Bai <[email protected]>
On i.MX8DXL, the Connectivity subsystem includes below peripherals:
1x ENET with AVB support, 1x ENET with TSN support, 2x USB OTG, 1x eMMC, 2x SD, 1x NAND.
--- .../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 137 ++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi new file +137 -0
@@ -0,0 +1,137 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 NXP + */ + +/delete-node/ &enet1_lpcg; +/delete-node/ &fec2; + +&conn_subsys { + conn_enet0_root_clk: clock-conn-enet0-root { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <250000000>; + clock-output-names = "conn_enet0_root_clk"; + }; + + eqos: ethernet@5b050000 { + compatible = "nxp,imx8dxl-dwmac-eqos", "snps,dwmac-5.10a"; + reg = <0x5b050000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "eth_wake_irq", "macirq"; + clocks = <&eqos_lpcg IMX_LPCG_CLK_2>, + <&eqos_lpcg IMX_LPCG_CLK_4>, + <&eqos_lpcg IMX_LPCG_CLK_0>, + <&eqos_lpcg IMX_LPCG_CLK_3>, + <&eqos_lpcg IMX_LPCG_CLK_1>; + clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem"; + assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>; + assigned-clock-rates = <125000000>; + power-domains = <&pd IMX_SC_R_ENET_1>; + clk_csr = <0>; + status = "disabled"; + }; + + usbotg2: usb@5b0e0000 { + compatible = "fsl,imx8dxl-usb", "fsl,imx7ulp-usb"; + reg = <0x5b0e0000 0x200>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc2 0>; + /* + * usbotg1 and usbotg2 share one clcok + * scfw disable clock access and keep it always on + * in case other core (M4) use one of these. + */ + clocks = <&clk_dummy>; + ahb-burst-config = <0x0>; + tx-burst-size-dword = <0x10>; + rx-burst-size-dword = <0x10>; + #stream-id-cells = <1>; + power-domains = <&pd IMX_SC_R_USB_1>; + status = "disabled"; + }; + + usbmisc2: usbmisc@5b0e0200 { + #index-cells = <1>; + compatible = "fsl,imx8dxl-usbmisc", "fsl,imx7ulp-usbmisc"; + reg = <0x5b0e0200 0x200>; + }; + + usbphy2: usbphy@0x5b110000 { + compatible = "fsl,imx8dxl-usbphy", "fsl,imx7ulp-usbphy"; + reg = <0x5b110000 0x1000>; + clocks = <&usb2_2_lpcg IMX_LPCG_CLK_7>; + status = "disabled"; + }; + + eqos_lpcg: clock-controller@5b240000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b240000 0x10000>; + #clock-cells = <1>; + clocks = <&conn_enet0_root_clk>, + <&conn_axi_clk>, + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>, + <&conn_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, + <IMX_LPCG_CLK_2>, + <IMX_LPCG_CLK_4>, + <IMX_LPCG_CLK_5>, + <IMX_LPCG_CLK_6>; + clock-output-names = "eqos_ptp", + "eqos_mem_clk", + "eqos_aclk", + "eqos_clk", + "eqos_csr_clk"; + power-domains = <&pd IMX_SC_R_ENET_1>; + }; + + usb2_2_lpcg: clock-controller@5b280000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5b280000 0x10000>; + #clock-cells = <1>; + + clock-indices = <IMX_LPCG_CLK_7>; + clocks = <&conn_ipg_clk>; + clock-output-names = "usboh3_2_phy_ipg_clk"; + }; + +}; + +&enet0_lpcg { + clocks = <&conn_enet0_root_clk>, + <&conn_enet0_root_clk>, + <&conn_axi_clk>, + <&clk IMX_SC_R_ENET_0 IMX_SC_C_TXCLK>, + <&conn_ipg_clk>, + <&conn_ipg_clk>; +}; + +&fec1 { + compatible = "fsl,imx8dxl-fec", "fsl,imx8qm-fec"; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; + assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>; + assigned-clock-rates = <125000000>; +}; + +&usdhc1 { + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usdhc2 { + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; + interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usdhc3 { + compatible = "fsl,imx8dxl-usdhc", "fsl,imx8qxp-usdhc"; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; +};
Signature · 1 line
2.31.1
PATCH v2 5/10 arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl
In reply to Abel VesaFrom: Jacky Bai <[email protected]>
Add the ddr subsys dtsi for i.MX8DXL. Additional db pmu is added compared to i.MX8QXP.
--- .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 36 +++++++++++++++++++ 1 file changed, 36 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi new file +36 -0
@@ -0,0 +1,36 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2021 NXP + */ + +&ddr_subsys { + db_ipg_clk: clock-db-ipg { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <456000000>; + clock-output-names = "db_ipg_clk"; + }; + + db_pmu0: db-pmu@5ca40000 { + compatible = "fsl,imx8dxl-db-pmu"; + reg = <0x5ca40000 0x10000>; + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&db_pmu0_lpcg IMX_LPCG_CLK_0>, + <&db_pmu0_lpcg IMX_LPCG_CLK_1>; + clock-names = "ipg", "cnt"; + power-domains = <&pd IMX_SC_R_PERF>; + }; + + db_pmu0_lpcg: clock-controller@5cae0000 { + compatible = "fsl,imx8qxp-lpcg"; + reg = <0x5cae0000 0x10000>; + #clock-cells = <1>; + clocks = <&db_ipg_clk>, <&db_ipg_clk>; + clock-indices = <IMX_LPCG_CLK_0>, + <IMX_LPCG_CLK_1>; + clock-output-names = "perf_lpcg_cnt_clk", + "perf_lpcg_ipg_clk"; + power-domains = <&pd IMX_SC_R_PERF>; + }; +};
Signature · 1 line
2.31.1
PATCH v2 6/10 arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl
In reply to Abel VesaFrom: Jacky Bai <[email protected]>
On i.MX8DXL, the LSIO subsystem includes below devices:
1x Inline Encryption Engine (IEE)
1x FlexSPI
4x Pulse Width Modulator (PWM)
5x General Purpose Timer (GPT)
8x GPIO
14x Message Unit (MU)
256KB On-Chip Memory (OCRAM)
compared to the common imx8-ss-lsio dtsi, some nodes' interrupt property need to be updated.
--- .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++++++++++++++++++ 1 file changed, 78 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi new file +78 -0
@@ -0,0 +1,78 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright 2019-2021 NXP + */ +&lsio_gpio0 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio1 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio2 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio3 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio4 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio5 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio6 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_gpio7 { + compatible = "fsl,imx8dxl-gpio", "fsl,imx35-gpio"; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu0 { + compatible = "fsl,imx8dxl-mu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu1 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu2 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu3 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu4 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu5 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; +}; + +&lsio_mu13 { + compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; +};
Signature · 1 line
2.31.1
PATCH v2 7/10 arm64: dts: imx8dxl: Add i.MX8DXL evk board support
In reply to Abel VesaFrom: Jacky Bai <[email protected]>
Add i.MX8DXL EVK board support.
--- arch/arm64/boot/dts/freescale/Makefile | 1 + arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++ 2 files changed, 267 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
arch/arm64/boot/dts/freescale/Makefile +1 -0
@@ -65,6 +65,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-thor96.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8dxl-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qm-mek.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb dtb-$(CONFIG_ARCH_MXC) += imx8qxp-colibri-eval-v3.dtb
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts new file +266 -0
266 lines not on this page · raw message
Signature · 1 line
2.31.1
PATCH v2 8/10 dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding
In reply to Abel VesaAdd i.MX8DXL ocotp compatible to the SCU bindings documentation.
--- Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +2 -1
@@ -141,7 +141,8 @@ OCOTP bindings based on SCU Message Protocol Required properties: - compatible: Should be one of: "fsl,imx8qm-scu-ocotp", - "fsl,imx8qxp-scu-ocotp". + "fsl,imx8qxp-scu-ocotp", + "fsl,imx8dxl-scu-ocotp". - #address-cells: Must be 1. Contains byte index - #size-cells: Must be 1. Contains byte length
Signature · 1 line
2.31.1
PATCH v2 9/10 dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
In reply to Abel VesaAdd i.MX8DXL lpi2c compatible to the bindings documentation.
--- Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/i2c/i2c-imx-lpi2c.yaml +2 -0
@@ -18,7 +18,9 @@ properties: - enum: - fsl,imx7ulp-lpi2c - fsl,imx8qm-lpi2c + - fsl,imx8dxl-lpi2c - items: + - const: fsl,imx8dxl-lpi2c - const: fsl,imx8qxp-lpi2c - const: fsl,imx7ulp-lpi2c
Signature · 1 line
2.31.1
PATCH v2 10/10 dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatible
In reply to Abel VesaAdd i.MX8DXL lpuart compatible to the bindings documentation.
--- Documentation/devicetree/bindings/serial/fsl-lpuart.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/serial/fsl-lpuart.yaml +1 -0
@@ -22,6 +22,7 @@ properties: - fsl,imx7ulp-lpuart - fsl,imx8qm-lpuart - items: + - const: fsl,imx8dxl-lpuart - const: fsl,imx8qxp-lpuart - const: fsl,imx7ulp-lpuart
Signature · 1 line
2.31.1
Rob Herring
maintainerQuoted 30 lines · Abel Vesa
This allows i.MX8DXL EVK board to boot to prompt.
Changes since v1:
* added commit message for the 8th, 9th and 10th patchesAbel Vesa (5):
arm64: dts: imx8-ss-lsio: Add mu5a mailbox
arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding
dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatibleJacky Bai (5):
arm64: dts: freescale: Add the top level dtsi support for imx8dxl
arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl
arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl
arm64: dts: imx8dxl: Add i.MX8DXL evk board support.../bindings/arm/freescale/fsl,scu.txt | 3 +- .../bindings/i2c/i2c-imx-lpi2c.yaml | 2 + .../bindings/serial/fsl-lpuart.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8-ss-lsio.dtsi | 7 + arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++ .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 53 ++++ .../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 137 +++++++++ .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 36 +++ .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++++
Quoted 8 lines
arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 245 ++++++++++++++++ 11 files changed, 828 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
Please resend to the DT list if you want the bindings checked and reviewed.
Rob
Quoted 40 lines · Rob Herring
Quoted 30 lines · Abel Vesa
This allows i.MX8DXL EVK board to boot to prompt.
Changes since v1:
* added commit message for the 8th, 9th and 10th patchesAbel Vesa (5):
arm64: dts: imx8-ss-lsio: Add mu5a mailbox
arm64: dts: freescale: Add adma subsystem dtsi for imx8dxl
dt-bindings: fsl: scu: Add i.MX8DXL ocotp binding
dt-bindings: i2c: imx-lpi2c: Add i.MX8DXL compatible match
dt-bindings: serial: fsl-lpuart: Add i.MX8DXL compatibleJacky Bai (5):
arm64: dts: freescale: Add the top level dtsi support for imx8dxl
arm64: dts: freescale: Add the imx8dxl connectivity subsys dtsi
arm64: dts: freescale: Add ddr subsys dtsi for imx8dxl
arm64: dts: freescale: Add lsio subsys dtsi for imx8dxl
arm64: dts: imx8dxl: Add i.MX8DXL evk board support.../bindings/arm/freescale/fsl,scu.txt | 3 +- .../bindings/i2c/i2c-imx-lpi2c.yaml | 2 + .../bindings/serial/fsl-lpuart.yaml | 1 + arch/arm64/boot/dts/freescale/Makefile | 1 + .../boot/dts/freescale/imx8-ss-lsio.dtsi | 7 + arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 266 ++++++++++++++++++ .../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 53 ++++ .../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 137 +++++++++ .../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 36 +++ .../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++++Quoted 8 lines
arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 245 ++++++++++++++++ 11 files changed, 828 insertions(+), 1 deletion(-) create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
Quoted 2 lines
Please resend to the DT list if you want the bindings checked and reviewed.
Did resend.
https://lore.kernel.org/lkml/[email protected]/
Quoted 1 line
Rob