i2c: aspeed: Late ack Tx done irqs and fix unhandled Tx done with NAK
v2 cover i2c: aspeed: Late ack Tx done irqs and fix unhandled Tx done with NAK
This series consists of two patches to fix the below issues observed when testing with slave mode:
+ Unhandled Tx done with NAK
+ Early ack'ed of Tx done (ACK and NAK) causing "Unexpected Ack on read request".
v2:
+ Split these patches to separate series [Joel]
+ Added the Fixes lines [Joel]
+ Fixed multiline comment [Joel]
+ Refactor irq clearing code [Joel, Guenter]
+ Revised commit message [Joel, Quan]
v1:
+ These patches are first introduced in
https://lkml.org/lkml/2021/5/19/205
Quan Nguyen (2):
i2c: aspeed: Fix unhandled Tx done with NAK
i2c: aspeed: Acknowledge Tx done with and without ACK irq late
drivers/i2c/busses/i2c-aspeed.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)
Signature · 1 line
2.28.0
PATCH v2 1/2 i2c: aspeed: Fix unhandled Tx done with NAK
Under normal conditions, after the last byte is sent by the Slave, the TX_NAK interrupt is raised. However, it is also observed that sometimes the Master issues the next transaction too quickly while the Slave IRQ handler is not yet invoked and the TX_NAK interrupt for the last byte of the previous READ_PROCESSED state has not been ack?ed. This TX_NAK interrupt is then raised together with SLAVE_MATCH interrupt and RX_DONE interrupt of the next coming transaction from Master. The Slave IRQ handler currently handles the SLAVE_MATCH and RX_DONE, but ignores the TX_NAK, causing complaints such as "aspeed-i2c-bus 1e78a040.i2c-bus: irq handled != irq. Expected 0x00000086, but was 0x00000084"
This commit adds code to handle this case by emitting a SLAVE_STOP event for the TX_NAK before processing the RX_DONE for the coming transaction from the Master.
---
v2:
+ Split to separate series [Joel]
+ Added the Fixes line [Joel]
+ Revised commit message [Quan]
v1:
+ First introduced in https://lkml.org/lkml/2021/5/19/205
drivers/i2c/busses/i2c-aspeed.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/i2c/busses/i2c-aspeed.c +5 -0
@@ -254,6 +254,11 @@ static u32 aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus, u32 irq_status)/* Slave was requested, restart state machine. */ if (irq_status &ASPEED_I2CD_INTR_SLAVE_MATCH ) { +if (irq_status &ASPEED_I2CD_INTR_TX_NAK && + bus->slave_state ==ASPEED_I2C_SLAVE_READ_PROCESSED ) { + irq_handled |=ASPEED_I2CD_INTR_TX_NAK ; +i2c_slave_event (slave,I2C_SLAVE_STOP , &value); + } irq_handled |=ASPEED_I2CD_INTR_SLAVE_MATCH ; bus->slave_state =ASPEED_I2C_SLAVE_START ; }
Signature · 1 line
2.28.0
PATCH v2 2/2 i2c: aspeed: Acknowledge Tx done with and without ACK irq late
In reply to Quan NguyenCommit 2be6b47211e1 ("i2c: aspeed: Acknowledge most interrupts early in interrupt handler") acknowledges most interrupts early before the slave irq handler is executed, except for the "Receive Done Interrupt status" which is acknowledged late in the interrupt.
However, it is observed that the early acknowledgment of "Transmit Done Interrupt Status" (with ACK or NACK) often causes the interrupt to be raised in READ REQUEST state, resulting in "Unexpected ACK on read request." complaint messages.
Assuming that the "Transmit Done" interrupt should only be acknowledged once it is truly processed, this commit fixes this issue by acknowledging this interrupt for both ACK and NACK cases late in the interrupt handler also.
---
v2:
+ Split to separate series [Joel]
+ Added the Fixes line [Joel]
+ Fixed multiline comment [Joel]
+ Refactor irq clearing code [Joel, Guenter]
+ Revised commit message [Joel]
+ Revised commit message [Quan]
+ About a note to remind why the readl() should immediately follow the writel() to fix the race condition when clearing irq status from commit c926c87b8e36 ("i2c: aspeed: Avoid i2c interrupt status clear race condition"), I think it looks straight forward in this patch and decided not to add that note. [Joel]
v1:
+ First introduced in https://lkml.org/lkml/2021/5/19/205
drivers/i2c/busses/i2c-aspeed.c | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-)
drivers/i2c/busses/i2c-aspeed.c +9 -8
@@ -606,8 +606,9 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)spin_lock (&bus->lock); irq_received =readl (bus->base +ASPEED_I2C_INTR_STS_REG ); -/* Ack all interrupts except for Rx done */ -writel (irq_received & ~ASPEED_I2CD_INTR_RX_DONE , +/* Ack all interrupts except for Rx done and Tx done with/without ACK */ +writel (irq_received & + ~(ASPEED_I2CD_INTR_RX_DONE |ASPEED_I2CD_INTR_TX_ACK |ASPEED_I2CD_INTR_TX_NAK ), bus->base +ASPEED_I2C_INTR_STS_REG );readl (bus->base +ASPEED_I2C_INTR_STS_REG ); irq_received &=ASPEED_I2CD_INTR_RECV_MASK ;
@@ -652,12 +653,12 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)"irq handled != irq. expected 0x%08x, but was 0x%08x\n" , irq_received, irq_handled); -/* Ack Rx done */ -if (irq_received &ASPEED_I2CD_INTR_RX_DONE ) { -writel (ASPEED_I2CD_INTR_RX_DONE , - bus->base +ASPEED_I2C_INTR_STS_REG ); -readl (bus->base +ASPEED_I2C_INTR_STS_REG ); - } +/* Ack Rx done and Tx done with/without ACK */ +writel (irq_received & + (ASPEED_I2CD_INTR_RX_DONE |ASPEED_I2CD_INTR_TX_ACK |ASPEED_I2CD_INTR_TX_NAK ), + bus->base +ASPEED_I2C_INTR_STS_REG ); +readl (bus->base +ASPEED_I2C_INTR_STS_REG ); +spin_unlock (&bus->lock);return irq_remaining ?IRQ_NONE :IRQ_HANDLED ; }
Signature · 1 line
2.28.0
Quoted 6 lines · Quan Nguyen
This series consists of two patches to fix the below issues observed when testing with slave mode:
+ Unhandled Tx done with NAK
+ Early ack'ed of Tx done (ACK and NAK) causing "Unexpected Ack on read request".
aspeed maintainers, are you happy with this series now?
Quoted 11 lines
v2:
+ Split these patches to separate series [Joel]
+ Added the Fixes lines [Joel]
+ Fixed multiline comment [Joel]
+ Refactor irq clearing code [Joel, Guenter]
+ Revised commit message [Joel, Quan]v1:
+ These patches are first introduced in
https://lkml.org/lkml/2021/5/19/205
Quoted 10 lines
Quan Nguyen (2):
i2c: aspeed: Fix unhandled Tx done with NAK
i2c: aspeed: Acknowledge Tx done with and without ACK irq latedrivers/i2c/busses/i2c-aspeed.c | 22 ++++++++++++++-------- 1 file changed, 14 insertions(+), 8 deletions(-)Signature · 1 line
2.28.0
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.ozlabs.org/pipermail/linux-aspeed/attachments/20211129/c46f05c2/attachment.sig>