dt-bindings: Drop unnecessary pinctrl properties
Subsystems (13)
Rob Herring
maintainerPATCH 1/1 dt-bindings: Drop unnecessary pinctrl properties
For a single pinctrl mode, it is not necessary to define pinctrl properties as the tools always allow pinctrl properties.
Signed-off-by Rob Herring <[email protected]>
--- .../display/rockchip/rockchip,rk3066-hdmi.yaml | 8 -------- Documentation/devicetree/bindings/input/gpio-keys.yaml | 6 ------ .../devicetree/bindings/pinctrl/cirrus,lochnagar.yaml | 9 --------- .../devicetree/bindings/pinctrl/cirrus,madera.yaml | 10 ---------- .../devicetree/bindings/sound/samsung-i2s.yaml | 6 ------ 5 files changed, 39 deletions(-)
Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml +0 -8
@@ -26,14 +26,6 @@ properties: clock-names: const: hclk - pinctrl-0: - maxItems: 2 - - pinctrl-names: - const: default - description: - Switch the iomux for the HPD/I2C pins to HDMI function. - power-domains: maxItems: 1
Documentation/devicetree/bindings/input/gpio-keys.yaml +0 -6
@@ -88,12 +88,6 @@ patternProperties: which can be disabled to suppress events from the button. type: boolean - pinctrl-0: - maxItems: 1 - - pinctrl-names: - maxItems: 1 - required: - linux,code
Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.yaml +0 -9
@@ -51,15 +51,6 @@ properties: appropriate of the LOCHNAGARx_PIN_NUM_GPIOS define, see [3]. maxItems: 1 - pinctrl-0: - description: - A phandle to the default pinctrl state. - - pinctrl-names: - description: - A pinctrl state named "default" must be defined. - const: default - pin-settings: type: object patternProperties:
Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +0 -10
@@ -30,16 +30,6 @@ description: | Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt properties: - pinctrl-0: - description: - A phandle to the node containing the subnodes containing default - configurations. - - pinctrl-names: - description: - A pinctrl state named "default" must be defined. - const: default - pin-settings: description: One subnode is required to contain the default settings. It
Documentation/devicetree/bindings/sound/samsung-i2s.yaml +0 -6
@@ -110,12 +110,6 @@ properties: Internal DMA register base address of the audio subsystem (used in secondary sound source). - pinctrl-0: - description: Should specify pin control groups used for this controller. - - pinctrl-names: - const: default - power-domains: maxItems: 1
Signature · 1 line
2.32.0
Quoted 12 lines · Rob Herring
For a single pinctrl mode, it is not necessary to define pinctrl properties as the tools always allow pinctrl properties.
Signed-off-by Rob Herring <[email protected]>--- .../display/rockchip/rockchip,rk3066-hdmi.yaml | 8 -------- Documentation/devicetree/bindings/input/gpio-keys.yaml | 6 ------ .../devicetree/bindings/pinctrl/cirrus,lochnagar.yaml | 9 --------- .../devicetree/bindings/pinctrl/cirrus,madera.yaml | 10 ---------- .../devicetree/bindings/sound/samsung-i2s.yaml | 6 ------ 5 files changed, 39 deletions(-)
Best regards,
Krzysztof
Quoted 5 lines · Rob Herring
For a single pinctrl mode, it is not necessary to define pinctrl properties as the tools always allow pinctrl properties.
Signed-off-by Rob Herring <[email protected]>---
Acked-by Charles Keepax <[email protected]>
Thanks,
Charles
Quoted 2 lines · Rob Herring
For a single pinctrl mode, it is not necessary to define pinctrl properties as the tools always allow pinctrl properties.
Acked-by Mark Brown <[email protected]>
Quoted 12 lines · Rob Herring
For a single pinctrl mode, it is not necessary to define pinctrl properties as the tools always allow pinctrl properties.
Signed-off-by Rob Herring <[email protected]>--- .../display/rockchip/rockchip,rk3066-hdmi.yaml | 8 -------- Documentation/devicetree/bindings/input/gpio-keys.yaml | 6 ------ .../devicetree/bindings/pinctrl/cirrus,lochnagar.yaml | 9 --------- .../devicetree/bindings/pinctrl/cirrus,madera.yaml | 10 ---------- .../devicetree/bindings/sound/samsung-i2s.yaml | 6 ------ 5 files changed, 39 deletions(-)
Applied, thanks!