rk808: Convert bindings to yaml

index c2f021a1a18f..20f71317d7ab 100644
@@ -472,8 +472,6 @@ rk808: pmic@1b {
 		vcc10-supply = <&vcc_sysin>;
 		vcc11-supply = <&vcc_sysin>;
 		vcc12-supply = <&vcc3v3_sys>;
-		vcc13-supply = <&vcc_sysin>;
-		vcc14-supply = <&vcc_sysin>;
 
 		regulators {
 			/* rk3399 center logic supply */

index d1aaf8e83391..0e45cc2d195b 100644
@@ -310,8 +310,6 @@ rk808: pmic@1b {
 		vcc10-supply = <&vcc3v3_sys>;
 		vcc11-supply = <&vcc3v3_sys>;
 		vcc12-supply = <&vcc3v3_sys>;
-		vcc13-supply = <&vcc3v3_sys>;
-		vcc14-supply = <&vcc3v3_sys>;
 		vddio-supply = <&vcc_3v0>;
 
 		regulators {

index f62c9f7af79d..0c99a5934ebf 100644
@@ -72,6 +72,7 @@ rk805: pmic@18 {
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;

index fe5fc9bf75c9..46cad7cb94bf 100644
@@ -85,6 +85,7 @@ rk805: pmic@18 {
 		interrupt-parent = <&gpio0>;
 		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
 		rockchip,system-power-controller;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;

index de2d3e88e27f..40bf808642b9 100644
@@ -160,6 +160,7 @@ pmic@18 {
 		pinctrl-0 = <&pmic_int_l>;
 		rockchip,system-power-controller;
 		wakeup-source;
+		#clock-cells = <0>;
 
 		vcc1-supply = <&vcc_sys>;
 		vcc2-supply = <&vcc_sys>;

index 39c60426c9c9..fc478ac4e781 100644
@@ -212,7 +212,7 @@ wl_18: LDO_REG8 {
 				regulator-name = "wl_18";
 			};
 
-			lcd_33: SWITCH_REG1 {
+			lcd_33: SWITCH_REG {
 				regulator-name = "lcd_33";
 			};
 		};

deleted file mode 100644
index 23a17a6663ec..000000000000
@@ -1,465 +0,0 @@
-RK8XX Power Management Integrated Circuit
-
-The rk8xx family current members:
-rk805
-rk808
-rk809
-rk817
-rk818
-
-Required properties:
-- compatible: "rockchip,rk805"
-- compatible: "rockchip,rk808"
-- compatible: "rockchip,rk809"
-- compatible: "rockchip,rk817"
-- compatible: "rockchip,rk818"
-- reg: I2C slave address
-- interrupts: the interrupt outputs of the controller.
-- #clock-cells: from common clock binding; shall be set to 1 (multiple clock
-  outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs.
-
-Optional properties:
-- clock-output-names: From common clock binding to override the
-  default output clock name
-- rockchip,system-power-controller: Telling whether or not this pmic is controlling
-  the system power.
-- wakeup-source: Device can be used as a wakeup source.
-
-Optional RK805 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc5-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc6-supply:  The input supply for LDO_REG3
-
-Optional RK808 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc7-supply:  The input supply for LDO_REG3 and LDO_REG7
-- vcc8-supply:  The input supply for SWITCH_REG1
-- vcc9-supply:  The input supply for LDO_REG4 and LDO_REG5
-- vcc10-supply: The input supply for LDO_REG6
-- vcc11-supply: The input supply for LDO_REG8
-- vcc12-supply: The input supply for SWITCH_REG2
-- dvs-gpios:  buck1/2 can be controlled by gpio dvs, this is GPIO specifiers
-  for 2 host gpio's used for dvs. The format of the gpio specifier depends in
-  the gpio controller. If DVS GPIOs aren't present, voltage changes will happen
-  very quickly with no slow ramp time.
-
-Optional shared RK809 and RK817 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- vcc5-supply:  The input supply for LDO_REG1, LDO_REG2, LDO_REG3
-- vcc6-supply:  The input supply for LDO_REG4, LDO_REG5, LDO_REG6
-- vcc7-supply:  The input supply for LDO_REG7, LDO_REG8, LDO_REG9
-
-Optional RK809 properties:
-- vcc8-supply:  The input supply for SWITCH_REG1
-- vcc9-supply:  The input supply for DCDC_REG5, SWITCH_REG2
-
-Optional RK817 properties:
-- clocks:	The input clock for the audio codec
-- clock-names:	The clock name for the codec clock. Should be "mclk".
-- #sound-dai-cells: Needed for the interpretation of sound dais. Should be 0.
-
-- vcc8-supply:  The input supply for BOOST
-- vcc9-supply:  The input supply for OTG_SWITCH
-- codec:	The child node for the codec to hold additional properties.
-		If no additional properties are required for the codec, this
-		node can be omitted.
-
-- rockchip,mic-in-differential: Telling if the microphone uses differential
-				mode. Should be under the codec child node.
-
-Optional RK818 properties:
-- vcc1-supply:  The input supply for DCDC_REG1
-- vcc2-supply:  The input supply for DCDC_REG2
-- vcc3-supply:  The input supply for DCDC_REG3
-- vcc4-supply:  The input supply for DCDC_REG4
-- boost-supply: The input supply for DCDC_BOOST
-- vcc6-supply:  The input supply for LDO_REG1 and LDO_REG2
-- vcc7-supply:  The input supply for LDO_REG3, LDO_REG5 and LDO_REG7
-- vcc8-supply:  The input supply for LDO_REG4, LDO_REG6 and LDO_REG8
-- vcc9-supply:  The input supply for LDO_REG9 and SWITCH_REG
-- h_5v-supply:  The input supply for HDMI_SWITCH
-- usb-supply:   The input supply for OTG_SWITCH
-
-Regulators: All the regulators of RK8XX to be instantiated shall be
-listed in a child node named 'regulators'. Each regulator is represented
-by a child node of the 'regulators' node.
-
-	regulator-name {
-		/* standard regulator bindings here */
-	};
-
-Following regulators of the RK805 PMIC regulators are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK805 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 3
-
-Following regulators of the RK808 PMIC block are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK808 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 8.
-	- SWITCH_REGn
-		- valid values for n are 1 to 2
-
-Following regulators of the RK809 and RK817 PMIC blocks are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK809 and RK817 datasheets.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 5 for RK809.
-		- valid values for n are 1 to 4 for RK817.
-	- LDO_REGn
-		- valid values for n are 1 to 9 for RK809.
-		- valid values for n are 1 to 9 for RK817.
-	- SWITCH_REGn
-		- valid values for n are 1 to 2 for RK809.
-	- BOOST for RK817
-	- OTG_SWITCH for RK817
-
-Following regulators of the RK818 PMIC block are supported. Note that
-the 'n' in regulator name, as in DCDC_REGn or LDOn, represents the DCDC or LDO
-number as described in RK818 datasheet.
-
-	- DCDC_REGn
-		- valid values for n are 1 to 4.
-	- LDO_REGn
-		- valid values for n are 1 to 9.
-	- SWITCH_REG
-	- HDMI_SWITCH
-	- OTG_SWITCH
-
-It is necessary to configure three pins for both the RK809 and RK817, the three
-pins are "gpio_ts" "gpio_gt" "gpio_slp".
-	The gpio_gt and gpio_ts pins support the gpio function.
-	The gpio_slp pin is for controlling the pmic states, as below:
-		- reset
-		- power down
-		- sleep
-
-Standard regulator bindings are used inside regulator subnodes. Check
-  Documentation/devicetree/bindings/regulator/regulator.txt
-for more details
-
-Example:
-	rk808: pmic@1b {
-		compatible = "rockchip,rk808";
-		clock-output-names = "xin32k", "rk808-clkout2";
-		interrupt-parent = <&gpio0>;
-		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int &dvs_1 &dvs_2>;
-		dvs-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>,
-			    <&gpio7 15 GPIO_ACTIVE_HIGH>;
-		reg = <0x1b>;
-		rockchip,system-power-controller;
-		wakeup-source;
-		#clock-cells = <1>;
-
-		vcc8-supply = <&vcc_18>;
-		vcc9-supply = <&vcc_io>;
-		vcc10-supply = <&vcc_io>;
-		vcc12-supply = <&vcc_io>;
-		vddio-supply = <&vccio_pmu>;
-
-		regulators {
-			vdd_cpu: DCDC_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-name = "vdd_arm";
-			};
-
-			vdd_gpu: DCDC_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <850000>;
-				regulator-max-microvolt = <1250000>;
-				regulator-name = "vdd_gpu";
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_ddr";
-			};
-
-			vcc_io: DCDC_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_io";
-			};
-
-			vccio_pmu: LDO_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_pmu";
-			};
-
-			vcc_tp: LDO_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc_tp";
-			};
-
-			vdd_10: LDO_REG3 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd_10";
-			};
-
-			vcc18_lcd: LDO_REG4 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc18_lcd";
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vccio_sd";
-			};
-
-			vdd10_lcd: LDO_REG6 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-name = "vdd10_lcd";
-			};
-
-			vcc_18: LDO_REG7 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc_18";
-			};
-
-			vcca_codec: LDO_REG8 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcca_codec";
-			};
-
-			vcc_wl: SWITCH_REG1 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_wl";
-			};
-
-			vcc_lcd: SWITCH_REG2 {
-				regulator-always-on;
-				regulator-boot-on;
-				regulator-name = "vcc_lcd";
-			};
-		};
-	};
-
-	rk817: pmic@20 {
-		compatible = "rockchip,rk817";
-		reg = <0x20>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
-		clock-output-names = "rk808-clkout1", "xin32k";
-		clock-names = "mclk";
-		clocks = <&cru SCLK_I2S1_OUT>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pmic_int>, <&i2s1_2ch_mclk>;
-		wakeup-source;
-		#clock-cells = <1>;
-		#sound-dai-cells = <0>;
-
-		vcc1-supply = <&vccsys>;
-		vcc2-supply = <&vccsys>;
-		vcc3-supply = <&vccsys>;
-		vcc4-supply = <&vccsys>;
-		vcc5-supply = <&vccsys>;
-		vcc6-supply = <&vccsys>;
-		vcc7-supply = <&vccsys>;
-
-		regulators {
-			vdd_logic: DCDC_REG1 {
-				regulator-name = "vdd_logic";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1150000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vdd_arm: DCDC_REG2 {
-				regulator-name = "vdd_arm";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-ramp-delay = <6001>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <950000>;
-				};
-			};
-
-			vcc_ddr: DCDC_REG3 {
-				regulator-name = "vcc_ddr";
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-				};
-			};
-
-			vcc_3v3: DCDC_REG4 {
-				regulator-name = "vcc_3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_1v8: LDO_REG2 {
-				regulator-name = "vcc_1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1800000>;
-				};
-			};
-
-			vdd_1v0: LDO_REG3 {
-				regulator-name = "vdd_1v0";
-				regulator-min-microvolt = <1000000>;
-				regulator-max-microvolt = <1000000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <1000000>;
-				};
-			};
-
-			vcc3v3_pmu: LDO_REG4 {
-				regulator-name = "vcc3v3_pmu";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vccio_sd: LDO_REG5 {
-				regulator-name = "vccio_sd";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_sd: LDO_REG6 {
-				regulator-name = "vcc_sd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-boot-on;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_bl: LDO_REG7 {
-				regulator-name = "vcc_bl";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3300000>;
-				};
-			};
-
-			vcc_lcd: LDO_REG8 {
-				regulator-name = "vcc_lcd";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <2800000>;
-				};
-			};
-
-			vcc_cam: LDO_REG9 {
-				regulator-name = "vcc_cam";
-				regulator-min-microvolt = <3000000>;
-				regulator-max-microvolt = <3000000>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-					regulator-suspend-microvolt = <3000000>;
-				};
-			};
-		};
-
-		rk817_codec: codec {
-			rockchip,mic-in-differential;
-		};
-	};

219 lines not on this page · raw message

257 lines not on this page · raw message

284 lines not on this page · raw message

330 lines not on this page · raw message

282 lines not on this page · raw message