Skip to contentSkip to conversation

mfd/power/regulators: dt-bindings: max14577: convert to dtschema

PATCH Applied Krzysztof Kozlowski 3 participants 10 messages Feb 15, 2022 – Mar 7, 2022

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

v3 cover mfd/power/regulators: dt-bindings: max14577: convert to dtschema

Hi,

Changes since v2
================
1. Add tags.
2. Drop DTS patch (applied).
3. mfd: Fix indentation in bindings example.
4. regulator: Drop regulator-name requirement and use unevaluatedProperties.

Changes since v1
================
1. MFD: Use absolute path to schemas
2. Regulator: mention all allowed properties, additionalProperties=false, add min/max values for voltages and current, don't use patternProperties when not needed.

Dependencies
============
1. DTS patch 1/4: nothing depends on it, sending here so Rob's automatic checker won't complain about DTS.
I will take it via Samsung SoC tree.

2. Final MFD patch (4/4) depends on regulator and power, so the last patches (2+3+4) should go via same tree.

Best regards,
Krzysztof

Krzysztof Kozlowski (3):
dt-bindings: power: supply: maxim,max14577: convert to dtschema
regulator: dt-bindings: maxim,max14577: convert to dtschema
dt-bindings: mfd: maxim,max14577: convert to dtschema

 .../devicetree/bindings/mfd/max14577.txt      | 147 -------------
 .../bindings/mfd/maxim,max14577.yaml          | 195 ++++++++++++++++++
 .../bindings/power/supply/maxim,max14577.yaml |  84 ++++++++
 .../bindings/regulator/maxim,max14577.yaml    |  78 +++++++
 MAINTAINERS                                   |   3 +-
 5 files changed, 359 insertions(+), 148 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
 create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
Signature · 1 line
2.32.0
#1 lore raw

PATCH v3 1/3 dt-bindings: power: supply: maxim,max14577: convert to dtschema

Convert the Charger bindings of Maxim MAX14577/MAX77836 MUIC to DT schema format. The existing bindings were defined in ../bindings/mfd/max14577.txt.

---
 .../bindings/power/supply/maxim,max14577.yaml | 84 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 85 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml new file +84 -0
new file mode 100644
index 000000000000..3978b48299de
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC Charger
+
+maintainers:
+  - Krzysztof Kozlowski <[email protected]>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-charger
+      - maxim,max77836-charger
+
+  maxim,constant-uvolt:
+    description:
+      Battery Constant Voltage in uV
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 4000000
+    maximum: 4350000
+
+  maxim,eoc-uamp:
+    description: |
+      Current in uA for End-Of-Charge mode.
+      MAX14577: 50000-20000
+      MAX77836: 5000-100000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,fast-charge-uamp:
+    description: |
+      Current in uA for Fast Charge
+      MAX14577: 90000-950000
+      MAX77836: 45000-475000
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  maxim,ovp-uvolt:
+    description:
+      OverVoltage Protection Threshold in uV; In an overvoltage condition, INT
+      asserts and charging stops.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [6000000, 6500000, 7000000, 7500000]
+
+required:
+  - compatible
+  - maxim,constant-uvolt
+  - maxim,eoc-uamp
+  - maxim,fast-charge-uamp
+  - maxim,ovp-uvolt
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-charger
+    then:
+      properties:
+        maxim,eoc-uamp:
+          minimum: 50000
+          maximum: 200000
+        maxim,fast-charge-uamp:
+          minimum: 90000
+          maximum: 950000
+    else:
+      # max77836
+      properties:
+        maxim,eoc-uamp:
+          minimum: 5000
+          maximum: 100000
+        maxim,fast-charge-uamp:
+          minimum: 45000
+          maximum: 475000
+
+additionalProperties: false
MAINTAINERS +1 -0
index f7eabdf93867..dbce6642e127 100644
@@ -11840,6 +11840,7 @@ M:	Krzysztof Kozlowski <[email protected]>
 M:	Bartlomiej Zolnierkiewicz <[email protected]>
 L:	[email protected]
 S:	Supported
+F:	Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
 F:	Documentation/devicetree/bindings/power/supply/maxim,max77693.yaml
 F:	drivers/power/supply/max14577_charger.c
 F:	drivers/power/supply/max77693_charger.c
Signature · 1 line
2.32.0
Applied
#2 lore raw

Re: [PATCH v3 1/3] dt-bindings: power: supply: maxim,max14577: convert to dtschema

Quoted 4 lines · Krzysztof Kozlowski

Convert the Charger bindings of Maxim MAX14577/MAX77836 MUIC to DT schema format. The existing bindings were defined in ../bindings/mfd/max14577.txt.

Quoted 8 lines
---
 .../bindings/power/supply/maxim,max14577.yaml | 84 +++++++++++++++++++
 MAINTAINERS                                   |  1 +
 2 files changed, 85 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml

Applied, thanks.

Signature · 4 lines
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
#3 lore raw

PATCH v3 2/3 regulator: dt-bindings: maxim,max14577: convert to dtschema

In reply to Krzysztof Kozlowski

Convert the regulator bindings of Maxim MAX14577/MAX77835 MUIC to DT schema format. The existing bindings were defined in ../bindings/mfd/max14577.txt.

---
 .../bindings/regulator/maxim,max14577.yaml    | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
Documentation/devicetree/bindings/regulator/maxim,max14577.yaml new file +78 -0
new file mode 100644
index 000000000000..16f01886a601
@@ -0,0 +1,78 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max14577.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim MAX14577/MAX77836 MicroUSB and Companion Power Management IC regulators
+
+maintainers:
+  - Krzysztof Kozlowski <[email protected]>
+
+description: |
+  This is a part of device tree bindings for Maxim MAX14577/MAX77836 MicroUSB
+  Integrated Circuit (MUIC).
+
+  See also Documentation/devicetree/bindings/mfd/maxim,max14577.yaml for
+  additional information and example.
+
+properties:
+  compatible:
+    enum:
+      - maxim,max14577-regulator
+      - maxim,max77836-regulator
+
+  CHARGER:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-min-microvolt: false
+      regulator-max-microvolt: false
+
+  SAFEOUT:
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Safeout LDO regulator (fixed voltage).
+
+    properties:
+      regulator-min-microamp: false
+      regulator-max-microamp: false
+      regulator-min-microvolt:
+        const: 4900000
+      regulator-max-microvolt:
+        const: 4900000
+
+patternProperties:
+  "^LDO[12]$":
+    type: object
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    description: |
+      Current regulator.
+
+    properties:
+      regulator-min-microamp: false
+      regulator-max-microamp: false
+      regulator-min-microvolt:
+        minimum: 800000
+      regulator-max-microvolt:
+        maximum: 3950000
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: maxim,max14577-regulator
+    then:
+      properties:
+        LDO1: false
+        LDO2: false
+
+additionalProperties: false
Signature · 1 line
2.32.0
Applied
#5 lore raw

Re: [PATCH v3 2/3] regulator: dt-bindings: maxim,max14577: convert to dtschema

In reply to Krzysztof Kozlowski
Quoted 10 lines · Krzysztof Kozlowski

Convert the regulator bindings of Maxim MAX14577/MAX77835 MUIC to DT schema format. The existing bindings were defined in ../bindings/mfd/max14577.txt.

---
 .../bindings/regulator/maxim,max14577.yaml    | 78 +++++++++++++++++++
 1 file changed, 78 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max14577.yaml

Applied, thanks.

Signature · 4 lines
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
#6 lore raw

PATCH v3 3/3 dt-bindings: mfd: maxim,max14577: convert to dtschema

In reply to Krzysztof Kozlowski

Convert the MFD part of Maxim MAX14577/MAX77836 MUIC to DT schema format. The example DTS was copied from existing DTS (exynos3250-rinato.dts), so keep the license as GPL-2.0-only.

---
 .../devicetree/bindings/mfd/max14577.txt      | 147 -------------
 .../bindings/mfd/maxim,max14577.yaml          | 195 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 196 insertions(+), 148 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
Documentation/devicetree/bindings/mfd/max14577.txt deleted +0 -147
deleted file mode 100644
index be11943a0560..000000000000
@@ -1,147 +0,0 @@
-Maxim MAX14577/77836 Multi-Function Device
-
-MAX14577 is a Multi-Function Device with Micro-USB Interface Circuit, Li+
-Battery Charger and SFOUT LDO output for powering USB devices. It is
-interfaced to host controller using I2C.
-
-MAX77836 additionally contains PMIC (with two LDO regulators) and Fuel Gauge.
-For the description of Fuel Gauge low SOC alert interrupt see:
-../power/supply/max17040_battery.txt
-
-
-Required properties:
-- compatible : Must be "maxim,max14577" or "maxim,max77836".
-- reg : I2C slave address for the max14577 chip (0x25 for max14577/max77836)
-- interrupts : IRQ line for the chip.
-
-
-Required nodes:
- - charger :
-	Node for configuring the charger driver.
-	Required properties:
-		- compatible : "maxim,max14577-charger"
-			or "maxim,max77836-charger"
-		- maxim,fast-charge-uamp : Current in uA for Fast Charge;
-			Valid values:
-			- for max14577: 90000 - 950000;
-			- for max77836: 45000 - 475000;
-		- maxim,eoc-uamp : Current in uA for End-Of-Charge mode;
-			Valid values:
-			- for max14577: 50000 - 200000;
-			- for max77836: 5000 - 100000;
-		- maxim,ovp-uvolt : OverVoltage Protection Threshold in uV;
-			In an overvoltage condition, INT asserts and charging
-			stops. Valid values:
-			- 6000000, 6500000, 7000000, 7500000;
-		- maxim,constant-uvolt : Battery Constant Voltage in uV;
-			Valid values:
-			- 4000000 - 4280000 (step by 20000);
-			- 4350000;
-
-
-Optional nodes:
-- max14577-muic/max77836-muic :
-	Node used only by extcon consumers.
-	Required properties:
-		- compatible : "maxim,max14577-muic" or "maxim,max77836-muic"
-
-- regulators :
-	Required properties:
-		- compatible : "maxim,max14577-regulator"
-			or "maxim,max77836-regulator"
-
-	May contain a sub-node per regulator from the list below. Each
-	sub-node should contain the constraints and initialization information
-	for that regulator. See regulator.txt for a description of standard
-	properties for these sub-nodes.
-
-	List of valid regulator names:
-	- for max14577: CHARGER, SAFEOUT.
-	- for max77836: CHARGER, SAFEOUT, LDO1, LDO2.
-
-	The SAFEOUT is a fixed voltage regulator so there is no need to specify
-	voltages for it.
-
-
-Example:
-
-#include <dt-bindings/interrupt-controller/irq.h>
-
-max14577@25 {
-	compatible = "maxim,max14577";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max14577-muic {
-		compatible = "maxim,max14577-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max14577-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max14577-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <450000>;
-		maxim,eoc-uamp = <50000>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
-
-
-max77836@25 {
-	compatible = "maxim,max77836";
-	reg = <0x25>;
-	interrupt-parent = <&gpx1>;
-	interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
-
-	muic: max77836-muic {
-		compatible = "maxim,max77836-muic";
-	};
-
-	regulators {
-		compatible = "maxim,max77836-regulator";
-
-		SAFEOUT {
-			regulator-name = "SAFEOUT";
-		};
-		CHARGER {
-			regulator-name = "CHARGER";
-			regulator-min-microamp = <90000>;
-			regulator-max-microamp = <950000>;
-			regulator-boot-on;
-		};
-		LDO1 {
-			regulator-name = "LDO1";
-			regulator-min-microvolt = <2700000>;
-			regulator-max-microvolt = <2700000>;
-		};
-		LDO2 {
-			regulator-name = "LDO2";
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <3950000>;
-		};
-	};
-
-	charger {
-		compatible = "maxim,max77836-charger";
-
-		maxim,constant-uvolt = <4350000>;
-		maxim,fast-charge-uamp = <225000>;
-		maxim,eoc-uamp = <7500>;
-		maxim,ovp-uvolt = <6500000>;
-	};
-};
Documentation/devicetree/bindings/mfd/maxim,max14577.yaml new file +195 -0

195 lines not on this page · raw message

MAINTAINERS +1 -1
index dbce6642e127..6783a9dc85a5 100644
@@ -11851,11 +11851,11 @@ M:	Krzysztof Kozlowski <[email protected]>
 M:	Bartlomiej Zolnierkiewicz <[email protected]>
 L:	[email protected]
 S:	Supported
+F:	Documentation/devicetree/bindings/*/maxim,max14577.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77686.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77693.yaml
 F:	Documentation/devicetree/bindings/*/maxim,max77843.yaml
 F:	Documentation/devicetree/bindings/clock/maxim,max77686.txt
-F:	Documentation/devicetree/bindings/mfd/max14577.txt
 F:	drivers/*/*max77843.c
 F:	drivers/*/max14577*.c
 F:	drivers/*/max77686*.c
Signature · 1 line
2.32.0
Applied
#7 lore raw

Re: [PATCH v3 3/3] dt-bindings: mfd: maxim,max14577: convert to dtschema

Quoted 6 lines · Krzysztof Kozlowski

Convert the MFD part of Maxim MAX14577/MAX77836 MUIC to DT schema format. The example DTS was copied from existing DTS (exynos3250-rinato.dts), so keep the license as GPL-2.0-only.

Quoted 7 lines
---
 .../devicetree/bindings/mfd/max14577.txt      | 147 -------------
 .../bindings/mfd/maxim,max14577.yaml          | 195 ++++++++++++++++++
 MAINTAINERS                                   |   2 +-
 3 files changed, 196 insertions(+), 148 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml

Applied, thanks.

Signature · 4 lines
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
#8 lore raw
In reply to Krzysztof Kozlowski
Quoted 2 lines · Krzysztof Kozlowski

Hi,

Hi Lee,

Mark reviewed regulator patch. Can you take entire set via MFD?

Best regards,
Krzysztof

Quoted 43 lines

Changes since v2
================
1. Add tags.
2. Drop DTS patch (applied).
3. mfd: Fix indentation in bindings example.
4. regulator: Drop regulator-name requirement and use unevaluatedProperties.

Changes since v1
================
1. MFD: Use absolute path to schemas
2. Regulator: mention all allowed properties, additionalProperties=false, add min/max values for voltages and current, don't use patternProperties when not needed.

Dependencies
============
1. DTS patch 1/4: nothing depends on it, sending here so Rob's automatic checker won't complain about DTS.
I will take it via Samsung SoC tree.

2. Final MFD patch (4/4) depends on regulator and power, so the last patches (2+3+4) should go via same tree.

Best regards,
Krzysztof

Krzysztof Kozlowski (3):
dt-bindings: power: supply: maxim,max14577: convert to dtschema
regulator: dt-bindings: maxim,max14577: convert to dtschema
dt-bindings: mfd: maxim,max14577: convert to dtschema

 .../devicetree/bindings/mfd/max14577.txt      | 147 -------------
 .../bindings/mfd/maxim,max14577.yaml          | 195 ++++++++++++++++++
 .../bindings/power/supply/maxim,max14577.yaml |  84 ++++++++
 .../bindings/regulator/maxim,max14577.yaml    |  78 +++++++
 MAINTAINERS                                   |   3 +-
 5 files changed, 359 insertions(+), 148 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
 create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
#9 lore raw

[GIT PULL] Immutable branch between MFD, SPI and DT due for the v5.18 merge window

In reply to Krzysztof Kozlowski

Enjoy!

The following changes since commit e783362eb54cd99b2cac8b3a9aeac942e6f6ac07:

Linux 5.17-rc1 (2022-01-23 10:12:53 +0200)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git ib-mfd-spi-dt-v5.18

for you to fetch changes up to 172e611b54e813c49a35b6b74bccaa99f27bf566:

dt-bindings: mfd: maxim,max77802: Convert to dtschema (2022-03-07 12:55:59 +0000)

----------------------------------------------------------------
Immutable branch between MFD, SPI and DT due for the v5.18 merge window

----------------------------------------------------------------
Krzysztof Kozlowski (13):
dt-bindings: extcon: maxim,max77843: Add MAX77843 bindings
regulator: dt-bindings: maxim,max77843: Add MAX77843 bindings
dt-bindings: mfd: maxim,max77843: Add MAX77843 bindings
MAINTAINERS: mfd: Cover MAX77843 by Maxim PMIC/MUIC for Exynos boards entry
spi: dt-bindings: samsung: Convert to dtschema
mfd: dt-bindings: google,cros-ec: Reference Samsung SPI bindings
mfd: dt-bindings: google,cros-ec: Fix indentation in example
spi: s3c64xx: Allow controller-data to be optional
dt-bindings: power: supply: maxim,max14577: Convert to dtschema
regulator: dt-bindings: maxim,max14577: Convert to dtschema
dt-bindings: mfd: maxim,max14577: Convert to dtschema
regulator: dt-bindings: maxim,max77802: Convert to dtschema
dt-bindings: mfd: maxim,max77802: Convert to dtschema

 .../devicetree/bindings/extcon/maxim,max77843.yaml |  40 +++++
 .../devicetree/bindings/mfd/google,cros-ec.yaml    |  31 ++--
 Documentation/devicetree/bindings/mfd/max14577.txt | 147 ----------------
 Documentation/devicetree/bindings/mfd/max77802.txt |  25 ---
 .../devicetree/bindings/mfd/maxim,max14577.yaml    | 195 +++++++++++++++++++++
 .../devicetree/bindings/mfd/maxim,max77802.yaml    | 194 ++++++++++++++++++++
 .../devicetree/bindings/mfd/maxim,max77843.yaml    | 144 +++++++++++++++
 .../bindings/power/supply/maxim,max14577.yaml      |  84 +++++++++
 .../devicetree/bindings/regulator/max77802.txt     | 111 ------------
 .../bindings/regulator/maxim,max14577.yaml         |  78 +++++++++
 .../bindings/regulator/maxim,max77802.yaml         |  85 +++++++++
 .../bindings/regulator/maxim,max77843.yaml         |  65 +++++++
 .../bindings/soc/samsung/exynos-usi.yaml           |   2 +-
 .../bindings/spi/samsung,spi-peripheral-props.yaml |  33 ++++
 .../devicetree/bindings/spi/samsung,spi.yaml       | 187 ++++++++++++++++++++
 .../bindings/spi/spi-peripheral-props.yaml         |   1 +
 .../devicetree/bindings/spi/spi-samsung.txt        | 122 -------------
 MAINTAINERS                                        |   9 +-
 drivers/spi/spi-s3c64xx.c                          |  14 +-
 19 files changed, 1136 insertions(+), 431 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/extcon/maxim,max77843.yaml
 delete mode 100644 Documentation/devicetree/bindings/mfd/max14577.txt
 delete mode 100644 Documentation/devicetree/bindings/mfd/max77802.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max14577.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77802.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/maxim,max77843.yaml
 create mode 100644 Documentation/devicetree/bindings/power/supply/maxim,max14577.yaml
 delete mode 100644 Documentation/devicetree/bindings/regulator/max77802.txt
 create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max14577.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77802.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/maxim,max77843.yaml
 create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi-peripheral-props.yaml
 create mode 100644 Documentation/devicetree/bindings/spi/samsung,spi.yaml
 delete mode 100644 Documentation/devicetree/bindings/spi/spi-samsung.txt
Signature · 4 lines
Lee Jones [李琼斯]
Principal Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog