Skip to contentSkip to conversation

can: kvaser_usb: CAN clock frequency regression

PATCH In review Jimmy Assarsson 2 participants 5 messages Jul 8, 2022 – Jul 10, 2022

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover can: kvaser_usb: CAN clock frequency regression

Backport of upstream patch series [1].

When fixing the CAN clock frequency,
fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device"), I introduced a regression.

For Leaf devices based on M32C, the firmware expects bittiming parameters calculated for 16MHz clock. Regardless of the actual clock frequency.

This regression affects M32C based Leaf devices with non-16MHz clock.

Also correct the bittiming constants in kvaser_usb_leaf.c, where the limits are different depending on which firmware/device being used.

[1]
https://lore.kernel.org/linux-can/[email protected]/

Jimmy Assarsson (3):
can: kvaser_usb: replace run-time checks with struct
kvaser_usb_driver_info
can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression
can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits

 drivers/net/can/usb/kvaser_usb/kvaser_usb.h   |  25 +-
 .../net/can/usb/kvaser_usb/kvaser_usb_core.c  | 286 ++++++++++--------
 .../net/can/usb/kvaser_usb/kvaser_usb_hydra.c |   4 +-
 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  | 119 ++++----
 4 files changed, 244 insertions(+), 190 deletions(-)
Signature · 1 line
2.36.1
#1 lore raw

PATCH 1/3 can: kvaser_usb: replace run-time checks with struct kvaser_usb_driver_info

commit 49f274c72357d2d74cba70b172cf369768909707 upstream.

Unify and move compile-time known information into new struct kvaser_usb_driver_info, in favor of run-time checks.

All Kvaser USBcanII supports listen-only mode and error counter reporting.

---
 drivers/net/can/usb/kvaser_usb/kvaser_usb.h   |  22 +-
 .../net/can/usb/kvaser_usb/kvaser_usb_core.c  | 275 ++++++++++--------
 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  |  24 +-
 3 files changed, 173 insertions(+), 148 deletions(-)
drivers/net/can/usb/kvaser_usb/kvaser_usb.h +12 -10
index 390b6bde883c..2e358e20d3d9 100644
@@ -35,9 +35,9 @@
 #define KVASER_USB_RX_BUFFER_SIZE		3072
 #define KVASER_USB_MAX_NET_DEVICES		5
 
-/* USB devices features */
-#define KVASER_USB_HAS_SILENT_MODE		BIT(0)
-#define KVASER_USB_HAS_TXRX_ERRORS		BIT(1)
+/* Kvaser USB device quirks */
+#define KVASER_USB_QUIRK_HAS_SILENT_MODE	BIT(0)
+#define KVASER_USB_QUIRK_HAS_TXRX_ERRORS	BIT(1)
 
 /* Device capabilities */
 #define KVASER_USB_CAP_BERR_CAP			0x01
@@ -65,12 +65,7 @@ struct kvaser_usb_dev_card_data_hydra {
 struct kvaser_usb_dev_card_data {
 	u32 ctrlmode_supported;
 	u32 capabilities;
-	union {
-		struct {
-			enum kvaser_usb_leaf_family family;
-		} leaf;
-		struct kvaser_usb_dev_card_data_hydra hydra;
-	};
+	struct kvaser_usb_dev_card_data_hydra hydra;
 };
 
 /* Context for an outstanding, not yet ACKed, transmission */
@@ -84,7 +79,7 @@ struct kvaser_usb {
 	struct usb_device *udev;
 	struct usb_interface *intf;
 	struct kvaser_usb_net_priv *nets[KVASER_USB_MAX_NET_DEVICES];
-	const struct kvaser_usb_dev_ops *ops;
+	const struct kvaser_usb_driver_info *driver_info;
 	const struct kvaser_usb_dev_cfg *cfg;
 
 	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
@@ -166,6 +161,12 @@ struct kvaser_usb_dev_ops {
 				  int *cmd_len, u16 transid);
 };
 
+struct kvaser_usb_driver_info {
+	u32 quirks;
+	enum kvaser_usb_leaf_family family;
+	const struct kvaser_usb_dev_ops *ops;
+};
+
 struct kvaser_usb_dev_cfg {
 	const struct can_clock clock;
 	const unsigned int timestamp_freq;
@@ -185,4 +186,5 @@ int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
 			      int len);
 
 int kvaser_usb_can_rx_over_error(struct net_device *netdev);
+
 #endif /* KVASER_USB_H */
drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +149 -126

447 lines not on this page · raw message

drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +12 -12
index f7af1bf5ab46..dda65bb66c1b 100644
@@ -405,7 +405,7 @@ kvaser_usb_leaf_frame_to_cmd(const struct kvaser_usb_net_priv *priv,
 				      sizeof(struct kvaser_cmd_tx_can);
 		cmd->u.tx_can.channel = priv->channel;
 
-		switch (dev->card_data.leaf.family) {
+		switch (dev->driver_info->family) {
 		case KVASER_LEAF:
 			cmd_tx_can_flags = &cmd->u.tx_can.leaf.flags;
 			break;
@@ -551,7 +551,7 @@ static int kvaser_usb_leaf_get_software_info_inner(struct kvaser_usb *dev)
 	if (err)
 		return err;
 
-	switch (dev->card_data.leaf.family) {
+	switch (dev->driver_info->family) {
 	case KVASER_LEAF:
 		kvaser_usb_leaf_get_software_info_leaf(dev, &cmd.u.leaf.softinfo);
 		break;
@@ -598,7 +598,7 @@ static int kvaser_usb_leaf_get_card_info(struct kvaser_usb *dev)
 
 	dev->nchannels = cmd.u.cardinfo.nchannels;
 	if (dev->nchannels > KVASER_USB_MAX_NET_DEVICES ||
-	    (dev->card_data.leaf.family == KVASER_USBCAN &&
+	    (dev->driver_info->family == KVASER_USBCAN &&
 	     dev->nchannels > MAX_USBCAN_NET_DEVICES))
 		return -EINVAL;
 
@@ -734,7 +734,7 @@ kvaser_usb_leaf_rx_error_update_can_state(struct kvaser_usb_net_priv *priv,
 	    new_state < CAN_STATE_BUS_OFF)
 		priv->can.can_stats.restarts++;
 
-	switch (dev->card_data.leaf.family) {
+	switch (dev->driver_info->family) {
 	case KVASER_LEAF:
 		if (es->leaf.error_factor) {
 			priv->can.can_stats.bus_error++;
@@ -813,7 +813,7 @@ static void kvaser_usb_leaf_rx_error(const struct kvaser_usb *dev,
 		}
 	}
 
-	switch (dev->card_data.leaf.family) {
+	switch (dev->driver_info->family) {
 	case KVASER_LEAF:
 		if (es->leaf.error_factor) {
 			cf->can_id |= CAN_ERR_BUSERROR | CAN_ERR_PROT;
@@ -1005,7 +1005,7 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev,
 	stats = &priv->netdev->stats;
 
 	if ((cmd->u.rx_can_header.flag & MSG_FLAG_ERROR_FRAME) &&
-	    (dev->card_data.leaf.family == KVASER_LEAF &&
+	    (dev->driver_info->family == KVASER_LEAF &&
 	     cmd->id == CMD_LEAF_LOG_MESSAGE)) {
 		kvaser_usb_leaf_leaf_rx_error(dev, cmd);
 		return;
@@ -1021,7 +1021,7 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev,
 		return;
 	}
 
-	switch (dev->card_data.leaf.family) {
+	switch (dev->driver_info->family) {
 	case KVASER_LEAF:
 		rx_data = cmd->u.leaf.rx_can.data;
 		break;
@@ -1036,7 +1036,7 @@ static void kvaser_usb_leaf_rx_can_msg(const struct kvaser_usb *dev,
 		return;
 	}
 
-	if (dev->card_data.leaf.family == KVASER_LEAF && cmd->id ==
+	if (dev->driver_info->family == KVASER_LEAF && cmd->id ==
 	    CMD_LEAF_LOG_MESSAGE) {
 		cf->can_id = le32_to_cpu(cmd->u.leaf.log_message.id);
 		if (cf->can_id & KVASER_EXTENDED_FRAME)
@@ -1133,14 +1133,14 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev,
 		break;
 
 	case CMD_LEAF_LOG_MESSAGE:
-		if (dev->card_data.leaf.family != KVASER_LEAF)
+		if (dev->driver_info->family != KVASER_LEAF)
 			goto warn;
 		kvaser_usb_leaf_rx_can_msg(dev, cmd);
 		break;
 
 	case CMD_CHIP_STATE_EVENT:
 	case CMD_CAN_ERROR_EVENT:
-		if (dev->card_data.leaf.family == KVASER_LEAF)
+		if (dev->driver_info->family == KVASER_LEAF)
 			kvaser_usb_leaf_leaf_rx_error(dev, cmd);
 		else
 			kvaser_usb_leaf_usbcan_rx_error(dev, cmd);
@@ -1152,12 +1152,12 @@ static void kvaser_usb_leaf_handle_command(const struct kvaser_usb *dev,
 
 	/* Ignored commands */
 	case CMD_USBCAN_CLOCK_OVERFLOW_EVENT:
-		if (dev->card_data.leaf.family != KVASER_USBCAN)
+		if (dev->driver_info->family != KVASER_USBCAN)
 			goto warn;
 		break;
 
 	case CMD_FLUSH_QUEUE_REPLY:
-		if (dev->card_data.leaf.family != KVASER_LEAF)
+		if (dev->driver_info->family != KVASER_LEAF)
 			goto warn;
 		break;
 
Signature · 1 line
2.36.1
#2 lore raw

PATCH 2/3 can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression

In reply to Jimmy Assarsson

commit e6c80e601053ffdac5709f11ff3ec1e19ed05f7b upstream.

The firmware of M32C based Leaf devices expects bittiming parameters calculated for 16MHz clock. Since we use the actual clock frequency of the device, the device may end up with wrong bittiming parameters, depending on user requested parameters.

This regression affects M32C based Leaf devices with non-16MHz clock.

Fixes a8b513b824e4 ("can: kvaser_usb: get CAN clock frequency from device")
---
 drivers/net/can/usb/kvaser_usb/kvaser_usb.h   |  1 +
 .../net/can/usb/kvaser_usb/kvaser_usb_core.c  | 33 ++++++++++++-------
 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  | 25 +++++++++-----
 3 files changed, 38 insertions(+), 21 deletions(-)
drivers/net/can/usb/kvaser_usb/kvaser_usb.h +1 -0
index 2e358e20d3d9..478e2eeec136 100644
@@ -38,6 +38,7 @@
 /* Kvaser USB device quirks */
 #define KVASER_USB_QUIRK_HAS_SILENT_MODE	BIT(0)
 #define KVASER_USB_QUIRK_HAS_TXRX_ERRORS	BIT(1)
+#define KVASER_USB_QUIRK_IGNORE_CLK_FREQ	BIT(2)
 
 /* Device capabilities */
 #define KVASER_USB_CAP_BERR_CAP			0x01
drivers/net/can/usb/kvaser_usb/kvaser_usb_core.c +21 -12
index 45abf2093b66..e570f5a76bbf 100644
@@ -101,26 +101,33 @@ static const struct kvaser_usb_driver_info kvaser_usb_driver_info_usbcan = {
 };
 
 static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf = {
-	.quirks = 0,
+	.quirks = KVASER_USB_QUIRK_IGNORE_CLK_FREQ,
 	.family = KVASER_LEAF,
 	.ops = &kvaser_usb_leaf_dev_ops,
 };
 
 static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err = {
-	.quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS,
+	.quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS |
+		  KVASER_USB_QUIRK_IGNORE_CLK_FREQ,
 	.family = KVASER_LEAF,
 	.ops = &kvaser_usb_leaf_dev_ops,
 };
 
 static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leaf_err_listen = {
 	.quirks = KVASER_USB_QUIRK_HAS_TXRX_ERRORS |
-		  KVASER_USB_QUIRK_HAS_SILENT_MODE,
+		  KVASER_USB_QUIRK_HAS_SILENT_MODE |
+		  KVASER_USB_QUIRK_IGNORE_CLK_FREQ,
 	.family = KVASER_LEAF,
 	.ops = &kvaser_usb_leaf_dev_ops,
 };
 
+static const struct kvaser_usb_driver_info kvaser_usb_driver_info_leafimx = {
+	.quirks = 0,
+	.ops = &kvaser_usb_leaf_dev_ops,
+};
+
 static const struct usb_device_id kvaser_usb_table[] = {
-	/* Leaf USB product IDs */
+	/* Leaf M32C USB product IDs */
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_DEVEL_PRODUCT_ID),
 		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_PRODUCT_ID),
@@ -161,22 +168,24 @@ static const struct usb_device_id kvaser_usb_table[] = {
 		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_CAN_R_PRODUCT_ID),
 		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf_err },
+
+	/* Leaf i.MX28 USB product IDs */
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LITE_V2_PRODUCT_ID),
-		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_HS_PRODUCT_ID),
-		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM_PRODUCT_ID),
-		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_LIGHT_2HS_PRODUCT_ID),
-		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_MINI_PCIE_2HS_PRODUCT_ID),
-		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN_R_V2_PRODUCT_ID),
-		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_R_V2_PRODUCT_ID),
-		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_LEAF_LIGHT_HS_V2_OEM2_PRODUCT_ID),
-		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leaf },
+		.driver_info = (kernel_ulong_t)&kvaser_usb_driver_info_leafimx },
 
 	/* USBCANII USB product IDs */
 	{ USB_DEVICE(KVASER_VENDOR_ID, USB_USBCAN2_PRODUCT_ID),
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +16 -9
index dda65bb66c1b..d94101c46508 100644
@@ -525,16 +525,23 @@ static void kvaser_usb_leaf_get_software_info_leaf(struct kvaser_usb *dev,
 	dev->fw_version = le32_to_cpu(softinfo->fw_version);
 	dev->max_tx_urbs = le16_to_cpu(softinfo->max_outstanding_tx);
 
-	switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) {
-	case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK:
+	if (dev->driver_info->quirks & KVASER_USB_QUIRK_IGNORE_CLK_FREQ) {
+		/* Firmware expects bittiming parameters calculated for 16MHz
+		 * clock, regardless of the actual clock
+		 */
 		dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz;
-		break;
-	case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK:
-		dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz;
-		break;
-	case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK:
-		dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz;
-		break;
+	} else {
+		switch (sw_options & KVASER_USB_LEAF_SWOPTION_FREQ_MASK) {
+		case KVASER_USB_LEAF_SWOPTION_FREQ_16_MHZ_CLK:
+			dev->cfg = &kvaser_usb_leaf_dev_cfg_16mhz;
+			break;
+		case KVASER_USB_LEAF_SWOPTION_FREQ_24_MHZ_CLK:
+			dev->cfg = &kvaser_usb_leaf_dev_cfg_24mhz;
+			break;
+		case KVASER_USB_LEAF_SWOPTION_FREQ_32_MHZ_CLK:
+			dev->cfg = &kvaser_usb_leaf_dev_cfg_32mhz;
+			break;
+		}
 	}
 }
 
Signature · 1 line
2.36.1
#3 lore raw

PATCH 3/3 can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits

In reply to Jimmy Assarsson

commit b3b6df2c56d80b8c6740433cff5f016668b8de70 upstream.

Use correct bittiming limits depending on device. For devices based on USBcanII, Leaf M32C or Leaf i.MX28.

Fixes 080f40a6fa28 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices")
Fixes b4f20130af23 ("can: kvaser_usb: add support for Kvaser Leaf v2 and usb mini PCIe")
Fixes f5d4abea3ce0 ("can: kvaser_usb: Add support for the USBcan-II family")
[mkl: remove stray netlink.h include]
[mkl: keep struct can_bittiming_const kvaser_usb_flexc_bittiming_const in kvaser_usb_hydra.c]
---
 drivers/net/can/usb/kvaser_usb/kvaser_usb.h   |  2 +
 .../net/can/usb/kvaser_usb/kvaser_usb_hydra.c |  4 +-
 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  | 76 +++++++++++--------
 3 files changed, 47 insertions(+), 35 deletions(-)
drivers/net/can/usb/kvaser_usb/kvaser_usb.h +2 -0
index 478e2eeec136..61e67986b625 100644
@@ -188,4 +188,6 @@ int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd,
 
 int kvaser_usb_can_rx_over_error(struct net_device *netdev);
 
+extern const struct can_bittiming_const kvaser_usb_flexc_bittiming_const;
+
 #endif /* KVASER_USB_H */
drivers/net/can/usb/kvaser_usb/kvaser_usb_hydra.c +2 -2
index dcee8dc828ec..fce3f069cdbc 100644
@@ -373,7 +373,7 @@ static const struct can_bittiming_const kvaser_usb_hydra_kcan_bittiming_c = {
 	.brp_inc = 1,
 };
 
-static const struct can_bittiming_const kvaser_usb_hydra_flexc_bittiming_c = {
+const struct can_bittiming_const kvaser_usb_flexc_bittiming_const = {
 	.name = "kvaser_usb_flex",
 	.tseg1_min = 4,
 	.tseg1_max = 16,
@@ -2052,7 +2052,7 @@ static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_flexc = {
 		.freq = 24000000,
 	},
 	.timestamp_freq = 1,
-	.bittiming_const = &kvaser_usb_hydra_flexc_bittiming_c,
+	.bittiming_const = &kvaser_usb_flexc_bittiming_const,
 };
 
 static const struct kvaser_usb_dev_cfg kvaser_usb_hydra_dev_cfg_rt = {
drivers/net/can/usb/kvaser_usb/kvaser_usb_leaf.c +43 -33

131 lines not on this page · raw message

Signature · 1 line
2.36.1
maintainer
#4 lore raw
In reply to Jimmy Assarsson
Quoted 23 lines · Jimmy Assarsson

Backport of upstream patch series [1].

When fixing the CAN clock frequency,
fb12797ab1fe ("can: kvaser_usb: get CAN clock frequency from device"), I introduced a regression.

For Leaf devices based on M32C, the firmware expects bittiming parameters calculated for 16MHz clock. Regardless of the actual clock frequency.

This regression affects M32C based Leaf devices with non-16MHz clock.

Also correct the bittiming constants in kvaser_usb_leaf.c, where the limits are different depending on which firmware/device being used.

[1]
https://lore.kernel.org/linux-can/[email protected]/

Jimmy Assarsson (3):
can: kvaser_usb: replace run-time checks with struct
kvaser_usb_driver_info
can: kvaser_usb: kvaser_usb_leaf: fix CAN clock frequency regression
can: kvaser_usb: kvaser_usb_leaf: fix bittiming limits

Quoted 9 lines
 drivers/net/can/usb/kvaser_usb/kvaser_usb.h   |  25 +-
 .../net/can/usb/kvaser_usb/kvaser_usb_core.c  | 286 ++++++++++--------
 .../net/can/usb/kvaser_usb/kvaser_usb_hydra.c |   4 +-
 .../net/can/usb/kvaser_usb/kvaser_usb_leaf.c  | 119 ++++----
 4 files changed, 244 insertions(+), 190 deletions(-)
Signature · 1 line
2.36.1

5.15, 5.10, 5.4, and 4.19 patches now queued up, thanks!

greg k-h