OpenRISC support for virt platform with PCI
Subsystems (3)
Stafford Horne
maintainerv3 cover OpenRISC support for virt platform with PCI
Hello,
This is a set of kernel patches which I have been using to support the new QEMU virt platform [1]. The virt platform supports PCI hence I have a patch here to add PCI support to OpenRISC.
A defconfig is also included which turns on drivers supported devices include virt network cards and the goldfish RTC.
[1] https://github.com/stffrdhrn/qemu/tree/or1k-virt-3
Changes since v2:
- This is based on the pci cleanup patches from
https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=pci/header-cleanup-immutable
so pci.h is removed.
- Change comment about parport.h in patch 2/3.
- Added a patch to define __pci_ioport_map as NULL when when IO ports are not supported.
Changes since v1:
- Remove PIO support as suggest by Arnd
Stafford Horne (3):
asm-generic: Support NO_IOPORT_MAP in pci_iomap.h
openrisc: Add pci bus support
openrisc: Add virt defconfig
arch/openrisc/Kconfig | 5 +- arch/openrisc/configs/virt_defconfig | 108 +++++++++++++++++++++++++++ arch/openrisc/include/asm/Kbuild | 1 + arch/openrisc/include/asm/io.h | 2 +- include/asm-generic/pci_iomap.h | 2 + 5 files changed, 116 insertions(+), 2 deletions(-) create mode 100644 arch/openrisc/configs/virt_defconfig
Signature · 1 line
2.36.1
Stafford Horne
maintainerPATCH v3 1/3 asm-generic: Support NO_IOPORT_MAP in pci_iomap.h
When building OpenRISC PCI which has no ioport_map we get the following build error.
lib/pci_iomap.c: In function 'pci_iomap_range':
CC drivers/i2c/i2c-core-base.o
./include/asm-generic/pci_iomap.h:29:41: error: implicit declaration of function 'ioport_map'; did you mean 'ioremap'? [-Werror=implicit-function-declaration]
29 | #define __pci_ioport_map(dev, port, nr) ioport_map((port), (nr))
| ^~~~~~~~~~
lib/pci_iomap.c:44:24: note: in expansion of macro '__pci_ioport_map'
44 | return __pci_ioport_map(dev, start, len);
| ^~~~~~~~~~~~~~~~
This patch adds a NULL definition of __pci_ioport_map for architetures which do not support ioport_map.
--- include/asm-generic/pci_iomap.h | 2 ++ 1 file changed, 2 insertions(+)
include/asm-generic/pci_iomap.h +2 -0
@@ -25,6 +25,8 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *);#ifdef CONFIG_NO_GENERIC_PCI_IOPORT_MAP extern void __iomem *__pci_ioport_map (struct pci_dev *dev,unsigned long port,unsigned int nr); +#elif !defined(CONFIG_HAS_IOPORT_MAP ) +#define __pci_ioport_map (dev, port, nr) NULL#else #define __pci_ioport_map (dev, port, nr) ioport_map((port), (nr))#endif
Signature · 1 line
2.36.1
Re: [PATCH v3 1/3] asm-generic: Support NO_IOPORT_MAP in pci_iomap.h
Quoted 12 lines · Stafford Horne
When building OpenRISC PCI which has no
ioport_mapwe get the following build error.
lib/pci_iomap.c: In function 'pci_iomap_range':
CCdrivers/i2c/i2c-core-base.o
./include/asm-generic/pci_iomap.h:29:41: error: implicit declaration of function 'ioport_map'; did you mean 'ioremap'? [-Werror=implicit-function-declaration]
29 | #define__pci_ioport_map(dev, port, nr)ioport_map((port), (nr))
| ^~~~~~~~~~
lib/pci_iomap.c:44:24: note: in expansion of macro '__pci_ioport_map'
44 | return__pci_ioport_map(dev, start, len);
| ^~~~~~~~~~~~~~~~
Quoted 5 lines
This patch adds a NULL definition of
__pci_ioport_mapfor architetures which do not supportioport_map.Suggested-by Arnd Bergmann <[email protected]>Signed-off-by Stafford Horne <[email protected]>
FWIW,
I assume this will go via some other tree; let me know if otherwise.
Quoted 20 lines
--- include/asm-generic/pci_iomap.h | 2 ++ 1 file changed, 2 insertions(+)include/asm-generic/pci_iomap.h +2
-0@@ -25,6 +25,8 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *);#ifdef CONFIG_NO_GENERIC_PCI_IOPORT_MAP extern void __iomem *__pci_ioport_map (struct pci_dev *dev,unsigned long port,unsigned int nr); +#elif !defined(CONFIG_HAS_IOPORT_MAP ) +#define __pci_ioport_map (dev, port, nr) NULL#else #define __pci_ioport_map (dev, port, nr) ioport_map((port), (nr))#endif Signature · 1 line
2.36.1
Stafford Horne
maintainerRe: [PATCH v3 1/3] asm-generic: Support NO_IOPORT_MAP in pci_iomap.h
Quoted 16 lines · Bjorn Helgaas
Quoted 15 lines · Stafford Horne
When building OpenRISC PCI which has no
ioport_mapwe get the following build error.
lib/pci_iomap.c: In function 'pci_iomap_range':
CCdrivers/i2c/i2c-core-base.o
./include/asm-generic/pci_iomap.h:29:41: error: implicit declaration of function 'ioport_map'; did you mean 'ioremap'? [-Werror=implicit-function-declaration]
29 | #define__pci_ioport_map(dev, port, nr)ioport_map((port), (nr))
| ^~~~~~~~~~
lib/pci_iomap.c:44:24: note: in expansion of macro '__pci_ioport_map'
44 | return__pci_ioport_map(dev, start, len);
| ^~~~~~~~~~~~~~~~This patch adds a NULL definition of
__pci_ioport_mapfor architetures which do not supportioport_map.
Quoted 6 lines
Quoted 2 lines
Suggested-by Arnd Bergmann <[email protected]>Signed-off-by Stafford Horne <[email protected]>FWIW,
Acked-by Bjorn Helgaas <[email protected]>
Thank you,
Quoted 1 line
I assume this will go via some other tree; let me know if otherwise.
Yes I plan to send this along with the other patches via the OpenRISC tree.
-Stafford
Stafford Horne
maintainerPATCH v3 2/3 openrisc: Add pci bus support
In reply to Stafford HorneThis patch adds required definitions to allow for PCI buses on OpenRISC. This is being tested on the OpenRISC QEMU virt platform which is in development.
OpenRISC does not have IO ports so we keep the definition of IO_SPACE_LIMIT and PIO_RESERVED to be 0.
Note, since commit 66bcd06099bb ("parport_pc: Also enable driver for PCI systems") all platforms that support PCI also need to support parallel port. We add a generic header to support compiling parallel port drivers, though they generally will not work as they require IO ports.
--- arch/openrisc/Kconfig | 5 ++++- arch/openrisc/include/asm/Kbuild | 1 + arch/openrisc/include/asm/io.h | 2 +- 3 files changed, 6 insertions(+), 2 deletions(-)
arch/openrisc/Kconfig +4 -1
@@ -20,8 +20,9 @@ config OPENRISC select GENERIC_IRQ_CHIP select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IOMAP + select GENERIC_PCI_IOMAP select GENERIC_CPU_DEVICES + select HAVE_PCI select HAVE_UID16 select GENERIC_ATOMIC64 select GENERIC_CLOCKEVENTS_BROADCAST
@@ -32,6 +33,8 @@ config OPENRISC select CPU_NO_EFFICIENT_FFS if !OPENRISC_HAVE_INST_FF1 select ARCH_USE_QUEUED_RWLOCKS select OMPIC if SMP + select PCI_DOMAINS_GENERIC if PCI + select PCI_MSI if PCI select ARCH_WANT_FRAME_POINTERS select GENERIC_IRQ_MULTI_HANDLER select MMU_GATHER_NO_RANGE if MMU
arch/openrisc/include/asm/Kbuild +1 -0
@@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 generic-y += extable.h generic-y += kvm_para.h +generic-y += parport.h generic-y += spinlock_types.h generic-y += spinlock.h generic-y += qrwlock_types.h
arch/openrisc/include/asm/io.h +1 -1
@@ -17,7 +17,7 @@#include <linux/types.h> /* -* PCI: can we really do 0 here if we have no port IO? +* PCI: We do not use IO ports in OpenRISC */ #define IO_SPACE_LIMIT 0
Signature · 1 line
2.36.1
Re: [PATCH v3 2/3] openrisc: Add pci bus support
Quoted 7 lines · Stafford Horne
This patch adds required definitions to allow for PCI buses on OpenRISC. This is being tested on the OpenRISC QEMU virt platform which is in development.
OpenRISC does not have IO ports so we keep the definition of
IO_SPACE_LIMITandPIO_RESERVEDto be 0.
Quoted 6 lines
Note, since commit
66bcd06099bb("parport_pc: Also enable driver for PCI systems") all platforms that support PCI also need to support parallel port. We add a generic header to support compiling parallel port drivers, though they generally will not work as they require IO ports.Signed-off-by Stafford Horne <[email protected]>
This patch results in
Building openrisc:allmodconfig ... failed
--------------
Error log:drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':drivers/video/fbdev/riva/fbdev.c:2062:42: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
drivers/video/fbdev/nvidia/nvidia.c: In function 'nvidiafb_probe':drivers/video/fbdev/nvidia/nvidia.c:1414:20: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
drivers/scsi/aic7xxx/aic7xxx_osm.c: In function 'ahc_platform_free':drivers/scsi/aic7xxx/aic7xxx_osm.c:1231:41: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
... and so on.
Prior to this patch, the code was not enabled because it depends on PCI.
Bisect log attached.
Guenter
---
# bad: [7c5e07b73ff3011c9b82d4a3286a3362b951ad2b] Add linux-next specific files for 20220728
# good: [e0dccc3b76fb35bb257b4118367a883073d7390e] Linux 5.19-rc8
git bisect start 'HEAD' 'v5.19-rc8'
# bad: [96bce6a87ad9690eaa9b1ca9ace7c98444d7869f] Revert "Revert "drm/amdgpu: add drm buddy support to amdgpu""
git bisect bad 96bce6a87ad9690eaa9b1ca9ace7c98444d7869f
# bad: [08765bd733f4662c2ad80e813c933758b3c1dddc] Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git
git bisect bad 08765bd733f4662c2ad80e813c933758b3c1dddc
# good: [d40269b953fd9abba9aadaa57c6486990ab806d1] Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc.git
git bisect good d40269b953fd9abba9aadaa57c6486990ab806d1
# bad: [3d810ed5c60843645c6a40cc5ebd66e399c94165] Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux.git
git bisect bad 3d810ed5c60843645c6a40cc5ebd66e399c94165
# good: [046537a939b089589a1a6e70df16b10a8f0c8ca8] Merge branch 'clk-next' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git
git bisect good 046537a939b089589a1a6e70df16b10a8f0c8ca8
# good: [d6b551b8f90cc92c7d3c09cf38c748efe305ecb4] powerpc/64e: Fix build failure with GCC 12 (unrecognized opcode: `wrteei') git bisect good d6b551b8f90cc92c7d3c09cf38c748efe305ecb4
# bad: [e30727fee2a25176c4558f49a102524eba973d49] Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux.git
git bisect bad e30727fee2a25176c4558f49a102524eba973d49
# bad: [36c4dbb3e78602ee750e12c85fadb3da4392eeac] Merge branch 'for-next' of git://github.com/openrisc/linux.git
git bisect bad 36c4dbb3e78602ee750e12c85fadb3da4392eeac
# good: [9db5e69af1f4de043ae962a908fc7ef1a40f7f51] Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu.git
git bisect good 9db5e69af1f4de043ae962a908fc7ef1a40f7f51
# good: [62fb295ce7dd9df3e04b48a943f8cafaf1f32980] MIPS: dts: align gpio-key node names with dtschema
git bisect good 62fb295ce7dd9df3e04b48a943f8cafaf1f32980
# bad: [2479c96f5d3db2610a6d463077dd3dad087529fb] openrisc: Add virt defconfig
git bisect bad 2479c96f5d3db2610a6d463077dd3dad087529fb
# good: [a2912b45b0826c6fc0ca9b264d03a2dacb7a72e8] asm-generic: Add new pci.h and use it
git bisect good a2912b45b0826c6fc0ca9b264d03a2dacb7a72e8
# good: [3e2a6fbbbf34d230b9063f1ca885d5d625a0404c] asm-generic: Support NO_IOPORT_MAP in pci_iomap.h
git bisect good 3e2a6fbbbf34d230b9063f1ca885d5d625a0404c
# bad: [48ef4b584af7ba4ecdf2dd58b641fb8d0a9d0c63] openrisc: Add pci bus support
git bisect bad 48ef4b584af7ba4ecdf2dd58b641fb8d0a9d0c63
# first bad commit: [48ef4b584af7ba4ecdf2dd58b641fb8d0a9d0c63] openrisc: Add pci bus support
Stafford Horne
maintainerRe: [PATCH v3 2/3] openrisc: Add pci bus support
Quoted 28 lines · Guenter Roeck
Quoted 7 lines · Stafford Horne
This patch adds required definitions to allow for PCI buses on OpenRISC. This is being tested on the OpenRISC QEMU virt platform which is in development.
OpenRISC does not have IO ports so we keep the definition of
IO_SPACE_LIMITandPIO_RESERVEDto be 0.Quoted 6 lines
Note, since commit
66bcd06099bb("parport_pc: Also enable driver for PCI systems") all platforms that support PCI also need to support parallel port. We add a generic header to support compiling parallel port drivers, though they generally will not work as they require IO ports.Signed-off-by Stafford Horne <[email protected]>This patch results in
Building openrisc:allmodconfig ... failed
--------------
Error log:drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':drivers/video/fbdev/riva/fbdev.c:2062:42: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
drivers/video/fbdev/nvidia/nvidia.c: In function 'nvidiafb_probe':drivers/video/fbdev/nvidia/nvidia.c:1414:20: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
Quoted 7 lines
drivers/scsi/aic7xxx/aic7xxx_osm.c: In function 'ahc_platform_free':drivers/scsi/aic7xxx/aic7xxx_osm.c:1231:41: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type... and so on.
Prior to this patch, the code was not enabled because it depends on PCI.
Hi Guenter,
Thanks for reporting this.
It's interesting, I don't get this on the openrisc/for-next branch.
BTW, do you turn off WERROR on the allmodconfig config? I get many warnings such as the below, but I haven't looked into it much yet:
fs/exec.c: In function 'shift_arg_pages':
fs/exec.c:687:27: error: 'tlb' is used uninitialized [-Werror=uninitialized]
687 | struct mmu_gather tlb;
| ^~~
I will try to see what is going on in linux-next.
-Stafford
Re: [PATCH v3 2/3] openrisc: Add pci bus support
Quoted 35 lines · Stafford Horne
Quoted 34 lines · Guenter Roeck
Quoted 7 lines · Stafford Horne
This patch adds required definitions to allow for PCI buses on OpenRISC. This is being tested on the OpenRISC QEMU virt platform which is in development.
OpenRISC does not have IO ports so we keep the definition of
IO_SPACE_LIMITandPIO_RESERVEDto be 0.Quoted 6 lines
Note, since commit
66bcd06099bb("parport_pc: Also enable driver for PCI systems") all platforms that support PCI also need to support parallel port. We add a generic header to support compiling parallel port drivers, though they generally will not work as they require IO ports.Signed-off-by Stafford Horne <[email protected]>This patch results in
Building openrisc:allmodconfig ... failed
--------------
Error log:drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':drivers/video/fbdev/riva/fbdev.c:2062:42: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
drivers/video/fbdev/nvidia/nvidia.c: In function 'nvidiafb_probe':drivers/video/fbdev/nvidia/nvidia.c:1414:20: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
drivers/scsi/aic7xxx/aic7xxx_osm.c: In function 'ahc_platform_free':drivers/scsi/aic7xxx/aic7xxx_osm.c:1231:41: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type... and so on.
Quoted 8 lines
Quoted 1 line
Prior to this patch, the code was not enabled because it depends on PCI.
Hi Guenter,
Thanks for reporting this.
It's interesting, I don't get this on the openrisc/for-next branch.
Hmm, weird. I see it all over the place. Complete log is at
https://kerneltests.org/builders/next-openrisc-next/builds/1880/steps/buildcommand/logs/stdio
if you are interested.
Quoted 3 lines
BTW, do you turn off WERROR on the allmodconfig config? I get many warnings such as the below, but I haven't looked into it much yet:
No, I don't. Disabling it would defeat its purpose.
Quoted 5 lines
fs/exec.c: In function 'shift_arg_pages':
fs/exec.c:687:27: error: 'tlb' is used uninitialized [-Werror=uninitialized]
687 | structmmu_gathertlb;
| ^~~
I don't see that in next-20220728. I tried with gcc-11.2 and 11.3. Which compiler do you use ?
Thanks,
Guenter
Quoted 4 lines
I will try to see what is going on in linux-next.
-Stafford
Stafford Horne
maintainerRe: [PATCH v3 2/3] openrisc: Add pci bus support
Quoted 55 lines · Guenter Roeck
Quoted 35 lines · Stafford Horne
Quoted 34 lines · Guenter Roeck
Quoted 7 lines · Stafford Horne
This patch adds required definitions to allow for PCI buses on OpenRISC. This is being tested on the OpenRISC QEMU virt platform which is in development.
OpenRISC does not have IO ports so we keep the definition of
IO_SPACE_LIMITandPIO_RESERVEDto be 0.Quoted 6 lines
Note, since commit
66bcd06099bb("parport_pc: Also enable driver for PCI systems") all platforms that support PCI also need to support parallel port. We add a generic header to support compiling parallel port drivers, though they generally will not work as they require IO ports.Signed-off-by Stafford Horne <[email protected]>This patch results in
Building openrisc:allmodconfig ... failed
--------------
Error log:drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe':drivers/video/fbdev/riva/fbdev.c:2062:42: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
drivers/video/fbdev/nvidia/nvidia.c: In function 'nvidiafb_probe':drivers/video/fbdev/nvidia/nvidia.c:1414:20: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
drivers/scsi/aic7xxx/aic7xxx_osm.c: In function 'ahc_platform_free':drivers/scsi/aic7xxx/aic7xxx_osm.c:1231:41: error:
passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type... and so on.
Quoted 8 lines
Quoted 1 line
Prior to this patch, the code was not enabled because it depends on PCI.
Hi Guenter,
Thanks for reporting this.
It's interesting, I don't get this on the openrisc/for-next branch.
Hmm, weird. I see it all over the place. Complete log is at
https://kerneltests.org/builders/next-openrisc-next/builds/1880/steps/buildcommand/logs/stdio
if you are interested.Quoted 3 lines
BTW, do you turn off WERROR on the allmodconfig config? I get many warnings such as the below, but I haven't looked into it much yet:
No, I don't. Disabling it would defeat its purpose.
Quoted 8 lines
Quoted 5 lines
fs/exec.c: In function 'shift_arg_pages':
fs/exec.c:687:27: error: 'tlb' is used uninitialized [-Werror=uninitialized]
687 | structmmu_gathertlb;
| ^~~I don't see that in next-20220728. I tried with gcc-11.2 and 11.3. Which compiler do you use ?
I am using gcc 12.0.1 with next-20220728. That might exaplain it, I am doing compiler development at the same time so I always end up with the latest and greatest warnings.
$ or1k-linux-gcc -v .. gcc version 12.0.1 20220210 (experimental) (GCC)
I can see the issue now:
drivers/video/fbdev/riva/fbdev.c:2062:42: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]
2062 | iounmap(default_par->riva.PRAMIN);
| ~~~~~~~~~~~~~~~~~^~~~~~~Just adding volatile does seem to fix this, I will do some more testing and create a formal patch.
--
arch/openrisc/include/asm/io.h +1 -1
@@ -31,7 +31,7 @@void __iomem *ioremap (phys_addr_t offset,unsigned long size);#define iounmap iounmap -extern void iounmap (void __iomem *addr); +extern void iounmap (volatile void __iomem *addr);#include <asm-generic/io.h>
arch/openrisc/mm/ioremap.c +1 -1
@@ -77,7 +77,7 @@ void __iomem *__ref ioremap(phys_addr_t addr, unsigned long size) }EXPORT_SYMBOL (ioremap); -void iounmap (void __iomem *addr) +void iounmap (volatile void __iomem *addr) {/* If the page is from the fixmap pool then we just clear out * the fixmap mapping.
Stafford Horne
maintainerPATCH v3 3/3 openrisc: Add virt defconfig
In reply to Stafford HorneI have been developing a new qemu virt platform to help with more efficient toolchain and kernel testing [1].
This patch adds the defconfig which is needed to support booting linux on the platform.
--- arch/openrisc/configs/virt_defconfig | 108 +++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) create mode 100644 arch/openrisc/configs/virt_defconfig
arch/openrisc/configs/virt_defconfig new file +108 -0
@@ -0,0 +1,108 @@ +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ_IDLE=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_OPENRISC_HAVE_INST_CMOV=y +CONFIG_OPENRISC_HAVE_INST_ROR=y +CONFIG_OPENRISC_HAVE_INST_RORI=y +CONFIG_OPENRISC_HAVE_INST_SEXT=y +CONFIG_NR_CPUS=8 +CONFIG_SMP=y +CONFIG_HZ_100=y +# CONFIG_OPENRISC_NO_SPR_SR_DSX is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +# CONFIG_INET_DIAG is not set +CONFIG_TCP_CONG_ADVANCED=y +# CONFIG_TCP_CONG_BIC is not set +# CONFIG_TCP_CONG_CUBIC is not set +# CONFIG_TCP_CONG_WESTWOOD is not set +# CONFIG_TCP_CONG_HTCP is not set +# CONFIG_IPV6 is not set +# CONFIG_WIRELESS is not set +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_HOST_GENERIC=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y +CONFIG_VIRTIO_BLK=y +CONFIG_NETDEVICES=y +CONFIG_VIRTIO_NET=y +CONFIG_ETHOC=y +CONFIG_MICREL_PHY=y +# CONFIG_WLAN is not set +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_VIRTIO_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_SYSCON=y +CONFIG_POWER_RESET_SYSCON_POWEROFF=y +CONFIG_SYSCON_REBOOT_MODE=y +# CONFIG_HWMON is not set +CONFIG_DRM=y +# CONFIG_DRM_FBDEV_EMULATION is not set +CONFIG_DRM_VIRTIO_GPU=y +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_INTEL8X0=y +CONFIG_SND_INTEL8X0M=y +CONFIG_SND_SOC=y +CONFIG_SND_VIRTIO=y +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_ITE is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_REDRAGON is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_PLATFORM=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y +CONFIG_USB_SERIAL=y +CONFIG_USB_GADGET=y +CONFIG_TYPEC=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_GOLDFISH=y +CONFIG_VIRT_DRIVERS=y +CONFIG_VIRTIO_PCI=y +# CONFIG_VIRTIO_PCI_LEGACY is not set +CONFIG_VIRTIO_INPUT=y +CONFIG_VIRTIO_MMIO=y +CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_POSIX_ACL=y +# CONFIG_DNOTIFY is not set +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_EXFAT_FS=y +CONFIG_TMPFS=y +CONFIG_NFS_FS=y +CONFIG_UNICODE=y +CONFIG_PRINTK_TIME=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_FTRACE=y
Signature · 1 line
2.36.1