Skip to contentSkip to conversation

platform/x86: int3472: Add handshake pin support

PATCH Superseded Hans de Goede 2 participants 14 messages Mar 25, 2025

Subsystems (3)

v1 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

cover platform/x86: int3472: Add handshake pin support

New Intel Meteor Lake based laptops with IPU6 cameras have a new type 0x12 pin defined in the INT3472 sensor companion device which describes the sensor's GPIOs.

This pin is primarily used on designs with a Lattice FPGA chip which is capable of running the sensor independently of the main CPU for features like presence detection. This pin needs to be driven high to make the FPGA run the power-on sequence of the sensor. After driving the pin high the FPGA "firmware" needs 25ms to comlpete the power-on sequence.

This series implements support for this by modelling the handshake GPIO as a GPIO driven 'dvdd' regulator with an enable-time of 25 ms, also see:

https://lore.kernel.org/platform-driver-x86/[email protected]/

Patch 1 Is an unrelated cleanup which I had lying around
Patches 2-7 Prepare + Implement the handshake GPIO
Patch 8 Is a small patch adding some extra debugging to GPIO remapping

This series applies on top of pdx86/for-next, for testing with 6.14 this patch needs to be cherry-picked first:
https://web.git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86.git/commit/?id=81b251c66bdfe263fb5e7a16838512ddaeed77df

Regards,

Hans

Hans de Goede (8):
platform/x86: int3472: Add skl_int3472_register_clock() helper platform/x86: int3472: Stop setting a supply-name for GPIO regulators platform/x86: int3472: Drop unused gpio field from struct

    int3472_gpio_regulator

platform/x86: int3472: Rework AVDD second sensor quirk handling platform/x86: int3472: Make regulator supply name configurable platform/x86: int3472: Prepare for registering more then 1 GPIO
regulator
platform/x86: int3472: Add handshake pin support platform/x86: int3472: Debug log when remapping pins

 drivers/platform/x86/intel/int3472/Makefile   |   3 +-
 .../x86/intel/int3472/clk_and_regulator.c     | 163 ++++++------------
 drivers/platform/x86/intel/int3472/common.h   |  45 +++--
 drivers/platform/x86/intel/int3472/discrete.c |  37 +++-
 .../x86/intel/int3472/discrete_quirks.c       |  22 +++
 5 files changed, 139 insertions(+), 131 deletions(-)
 create mode 100644 drivers/platform/x86/intel/int3472/discrete_quirks.c
Signature · 1 line
2.49.0
#1 lore raw

PATCH 1/8 platform/x86: int3472: Add skl_int3472_register_clock() helper

skl_int3472_register_dsm_clock() and skl_int3472_register_gpio_clock() are 80% the same code. Factor out the common code into a new skl_int3472_register_clock() helper.

---
 .../x86/intel/int3472/clk_and_regulator.c     | 57 +++++--------------
 1 file changed, 13 insertions(+), 44 deletions(-)
drivers/platform/x86/intel/int3472/clk_and_regulator.c +13 -44
index 16e36ac0a7b4..837990af24fe 100644
@@ -118,7 +118,7 @@ static const struct clk_ops skl_int3472_clock_ops = {
 	.recalc_rate = skl_int3472_clk_recalc_rate,
 };
 
-int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472)
+static int skl_int3472_register_clock(struct int3472_discrete_device *int3472)
 {
 	struct acpi_device *adev = int3472->adev;
 	struct clk_init_data init = {
@@ -127,12 +127,6 @@ int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472)
 	};
 	int ret;
 
-	if (int3472->clock.cl)
-		return 0; /* A GPIO controlled clk has already been registered */
-
-	if (!acpi_check_dsm(adev->handle, &img_clk_guid, 0, BIT(1)))
-		return 0; /* DSM clock control is not available */
-
 	init.name = kasprintf(GFP_KERNEL, "%s-clk", acpi_dev_name(adev));
 	if (!init.name)
 		return -ENOMEM;
@@ -161,51 +155,26 @@ int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472)
 	return ret;
 }
 
+int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472)
+{
+	if (int3472->clock.cl)
+		return 0; /* A GPIO controlled clk has already been registered */
+
+	if (!acpi_check_dsm(int3472->adev->handle, &img_clk_guid, 0, BIT(1)))
+		return 0; /* DSM clock control is not available */
+
+	return skl_int3472_register_clock(int3472);
+}
+
 int skl_int3472_register_gpio_clock(struct int3472_discrete_device *int3472,
 				    struct gpio_desc *gpio)
 {
-	struct clk_init_data init = {
-		.ops = &skl_int3472_clock_ops,
-		.flags = CLK_GET_RATE_NOCACHE,
-	};
-	int ret;
-
 	if (int3472->clock.cl)
 		return -EBUSY;
 
 	int3472->clock.ena_gpio = gpio;
 
-	init.name = kasprintf(GFP_KERNEL, "%s-clk",
-			      acpi_dev_name(int3472->adev));
-	if (!init.name)
-		return -ENOMEM;
-
-	int3472->clock.frequency = skl_int3472_get_clk_frequency(int3472);
-
-	int3472->clock.clk_hw.init = &init;
-	int3472->clock.clk = clk_register(&int3472->adev->dev,
-					  &int3472->clock.clk_hw);
-	if (IS_ERR(int3472->clock.clk)) {
-		ret = PTR_ERR(int3472->clock.clk);
-		goto out_free_init_name;
-	}
-
-	int3472->clock.cl = clkdev_create(int3472->clock.clk, NULL,
-					  int3472->sensor_name);
-	if (!int3472->clock.cl) {
-		ret = -ENOMEM;
-		goto err_unregister_clk;
-	}
-
-	kfree(init.name);
-	return 0;
-
-err_unregister_clk:
-	clk_unregister(int3472->clock.clk);
-out_free_init_name:
-	kfree(init.name);
-
-	return ret;
+	return skl_int3472_register_clock(int3472);
 }
 
 void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472)
Signature · 1 line
2.49.0
Reviewed-by on v1 1/8
#2 lore raw

Re: [PATCH 1/8] platform/x86: int3472: Add skl_int3472_register_clock() helper

Quoted 3 lines · Hans de Goede

skl_int3472_register_dsm_clock() and skl_int3472_register_gpio_clock() are 80% the same code. Factor out the common code into a new skl_int3472_register_clock() helper.

Indeed. Good catch!

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#3 lore raw

PATCH 2/8 platform/x86: int3472: Stop setting a supply-name for GPIO regulators

In reply to Hans de Goede

The supply_name field is not mandatory and is supposed to be set to the name of another regulator when it is known that the regulator being registered is supplied by that other regulator.

Having a regulator supplying the regulator which is being registered does not apply to the INT3472 GPIO regulator, stop setting a supply_name.

---
 drivers/platform/x86/intel/int3472/clk_and_regulator.c | 3 ---
 drivers/platform/x86/intel/int3472/common.h            | 5 +----
 2 files changed, 1 insertion(+), 7 deletions(-)
drivers/platform/x86/intel/int3472/clk_and_regulator.c +0 -3
index 837990af24fe..40434591dd0b 100644
@@ -256,12 +256,9 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 	snprintf(int3472->regulator.regulator_name,
 		 sizeof(int3472->regulator.regulator_name), "%s-regulator",
 		 acpi_dev_name(int3472->adev));
-	snprintf(int3472->regulator.supply_name,
-		 GPIO_REGULATOR_SUPPLY_NAME_LENGTH, "supply-0");
 
 	int3472->regulator.rdesc = INT3472_REGULATOR(
 						int3472->regulator.regulator_name,
-						int3472->regulator.supply_name,
 						&int3472_gpio_regulator_ops);
 
 	int3472->regulator.gpio = gpio;
drivers/platform/x86/intel/int3472/common.h +1 -4
index 145dec66df64..72ef222629b6 100644
@@ -27,17 +27,15 @@
 #define INT3472_MAX_SENSOR_GPIOS				3
 
 #define GPIO_REGULATOR_NAME_LENGTH				21
-#define GPIO_REGULATOR_SUPPLY_NAME_LENGTH			9
 #define GPIO_REGULATOR_SUPPLY_MAP_COUNT				2
 
 #define INT3472_LED_MAX_NAME_LEN				32
 
 #define CIO2_SENSOR_SSDB_MCLKSPEED_OFFSET			86
 
-#define INT3472_REGULATOR(_name, _supply, _ops)			\
+#define INT3472_REGULATOR(_name, _ops)				\
 	(const struct regulator_desc) {				\
 		.name = _name,					\
-		.supply_name = _supply,				\
 		.type = REGULATOR_VOLTAGE,			\
 		.ops = _ops,					\
 		.owner = THIS_MODULE,				\
@@ -82,7 +80,6 @@ struct int3472_discrete_device {
 		/* SUPPLY_MAP_COUNT * 2 to make room for second sensor mappings */
 		struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2];
 		char regulator_name[GPIO_REGULATOR_NAME_LENGTH];
-		char supply_name[GPIO_REGULATOR_SUPPLY_NAME_LENGTH];
 		struct gpio_desc *gpio;
 		struct regulator_dev *rdev;
 		struct regulator_desc rdesc;
Signature · 1 line
2.49.0
Reviewed-by on v1 2/8
#4 lore raw

Re: [PATCH 2/8] platform/x86: int3472: Stop setting a supply-name for GPIO regulators

Quoted 6 lines · Hans de Goede

The supply_name field is not mandatory and is supposed to be set to the name of another regulator when it is known that the regulator being registered is supplied by that other regulator.

Having a regulator supplying the regulator which is being registered does not apply to the INT3472 GPIO regulator, stop setting a supply_name.

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#5 lore raw

PATCH 3/8 platform/x86: int3472: Drop unused gpio field from struct int3472_gpio_regulator

In reply to Hans de Goede

The gpio field in struct int3472_gpio_regulator is only briefly used to store the gpio in skl_int3472_register_regulator() instead just store the gpio directly into cfg.ena_gpiod an drop the gpio field.

---
 drivers/platform/x86/intel/int3472/clk_and_regulator.c | 4 +---
 drivers/platform/x86/intel/int3472/common.h            | 1 -
 2 files changed, 1 insertion(+), 4 deletions(-)
drivers/platform/x86/intel/int3472/clk_and_regulator.c +1 -3
index 40434591dd0b..5f6c66215f63 100644
@@ -261,11 +261,9 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 						int3472->regulator.regulator_name,
 						&int3472_gpio_regulator_ops);
 
-	int3472->regulator.gpio = gpio;
-
 	cfg.dev = &int3472->adev->dev;
 	cfg.init_data = &init_data;
-	cfg.ena_gpiod = int3472->regulator.gpio;
+	cfg.ena_gpiod = gpio;
 
 	int3472->regulator.rdev = regulator_register(int3472->dev,
 						     &int3472->regulator.rdesc,
drivers/platform/x86/intel/int3472/common.h +0 -1
index 72ef222629b6..e0fa34be8a07 100644
@@ -80,7 +80,6 @@ struct int3472_discrete_device {
 		/* SUPPLY_MAP_COUNT * 2 to make room for second sensor mappings */
 		struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2];
 		char regulator_name[GPIO_REGULATOR_NAME_LENGTH];
-		struct gpio_desc *gpio;
 		struct regulator_dev *rdev;
 		struct regulator_desc rdesc;
 	} regulator;
Signature · 1 line
2.49.0
Reviewed-by on v1 3/8
#6 lore raw

Re: [PATCH 3/8] platform/x86: int3472: Drop unused gpio field from struct int3472_gpio_regulator

Quoted 1 line · Hans de Goede

The gpio field in struct int3472_gpio_regulator is only briefly used to

(no need to change anything on the firs line :)

Quoted 1 line

store the gpio in skl_int3472_register_regulator() instead just store

GPIO

' instead' --> '. Instead' (otherwise it's a tautology)

Quoted 1 line

the gpio directly into cfg.ena_gpiod an drop the gpio field.

GPIO (only the first occurrence)

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#7 lore raw

PATCH 4/8 platform/x86: int3472: Rework AVDD second sensor quirk handling

In reply to Hans de Goede

Rework the discrete quirk handling to use a quirks struct which is pointed to by a dmi_system_id table, rather then having a dmi_system_id table per type of quirk.

This is a preparation patch for adding support for multiple regulators, where not all regulators might be shared between sensors.

---
 drivers/platform/x86/intel/int3472/Makefile   |  3 +-
 .../x86/intel/int3472/clk_and_regulator.c     | 28 ++-----------------
 drivers/platform/x86/intel/int3472/common.h   | 13 ++++++++-
 drivers/platform/x86/intel/int3472/discrete.c | 13 ++++++++-
 .../x86/intel/int3472/discrete_quirks.c       | 22 +++++++++++++++
 5 files changed, 50 insertions(+), 29 deletions(-)
 create mode 100644 drivers/platform/x86/intel/int3472/discrete_quirks.c
drivers/platform/x86/intel/int3472/Makefile +2 -1
index a8aba07bf1dc..103661e6685d 100644
@@ -1,7 +1,8 @@
 obj-$(CONFIG_INTEL_SKL_INT3472)		+= intel_skl_int3472_discrete.o \
 					   intel_skl_int3472_tps68470.o \
 					   intel_skl_int3472_common.o
-intel_skl_int3472_discrete-y		:= discrete.o clk_and_regulator.o led.o
+intel_skl_int3472_discrete-y		:= discrete.o discrete_quirks.o \
+					   clk_and_regulator.o led.o
 intel_skl_int3472_tps68470-y		:= tps68470.o tps68470_board_data.o
 
 intel_skl_int3472_common-y		+= common.o
drivers/platform/x86/intel/int3472/clk_and_regulator.c +2 -26
index 5f6c66215f63..374a99dea7d1 100644
@@ -5,7 +5,6 @@
 #include <linux/clkdev.h>
 #include <linux/clk-provider.h>
 #include <linux/device.h>
-#include <linux/dmi.h>
 #include <linux/gpio/consumer.h>
 #include <linux/regulator/driver.h>
 #include <linux/slab.h>
@@ -205,37 +204,14 @@ static const char * const skl_int3472_regulator_map_supplies[] = {
 static_assert(ARRAY_SIZE(skl_int3472_regulator_map_supplies) ==
 	      GPIO_REGULATOR_SUPPLY_MAP_COUNT);
 
-/*
- * On some models there is a single GPIO regulator which is shared between
- * sensors and only listed in the ACPI resources of one sensor.
- * This DMI table contains the name of the second sensor. This is used to add
- * entries for the second sensor to the supply_map.
- */
-static const struct dmi_system_id skl_int3472_regulator_second_sensor[] = {
-	{
-		/* Lenovo Miix 510-12IKB */
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-			DMI_MATCH(DMI_PRODUCT_VERSION, "MIIX 510-12IKB"),
-		},
-		.driver_data = "i2c-OVTI2680:00",
-	},
-	{ }
-};
-
 int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
-				   struct gpio_desc *gpio)
+				   struct gpio_desc *gpio,
+				   const char *second_sensor)
 {
 	struct regulator_init_data init_data = { };
 	struct regulator_config cfg = { };
-	const char *second_sensor = NULL;
-	const struct dmi_system_id *id;
 	int i, j;
 
-	id = dmi_first_match(skl_int3472_regulator_second_sensor);
-	if (id)
-		second_sensor = id->driver_data;
-
 	for (i = 0, j = 0; i < ARRAY_SIZE(skl_int3472_regulator_map_supplies); i++) {
 		int3472->regulator.supply_map[j].supply = skl_int3472_regulator_map_supplies[i];
 		int3472->regulator.supply_map[j].dev_name = int3472->sensor_name;
drivers/platform/x86/intel/int3472/common.h +12 -1
index e0fa34be8a07..3728f3864a84 100644
@@ -48,6 +48,7 @@
 	container_of(clk, struct int3472_discrete_device, clock)
 
 struct acpi_device;
+struct dmi_system_id;
 struct i2c_client;
 struct platform_device;
 
@@ -68,6 +69,11 @@ struct int3472_cldb {
 	u8 reserved2[17];
 };
 
+struct int3472_discrete_quirks {
+	/* For models where AVDD GPIO is shared between sensors */
+	const char *avdd_second_sensor;
+};
+
 struct int3472_discrete_device {
 	struct acpi_device *adev;
 	struct device *dev;
@@ -100,11 +106,15 @@ struct int3472_discrete_device {
 		struct gpio_desc *gpio;
 	} pled;
 
+	struct int3472_discrete_quirks quirks;
+
 	unsigned int ngpios; /* how many GPIOs have we seen */
 	unsigned int n_sensor_gpios; /* how many have we mapped to sensor */
 	struct gpiod_lookup_table gpios;
 };
 
+extern const struct dmi_system_id skl_int3472_discrete_quirks[];
+
 union acpi_object *skl_int3472_get_acpi_buffer(struct acpi_device *adev,
 					       char *id);
 int skl_int3472_fill_cldb(struct acpi_device *adev, struct int3472_cldb *cldb);
@@ -118,7 +128,8 @@ int skl_int3472_register_dsm_clock(struct int3472_discrete_device *int3472);
 void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472);
 
 int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
-				   struct gpio_desc *gpio);
+				   struct gpio_desc *gpio,
+				   const char *second_sensor);
 void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472);
 
 int skl_int3472_register_pled(struct int3472_discrete_device *int3472, struct gpio_desc *gpio);
drivers/platform/x86/intel/int3472/discrete.c +12 -1
index 30ff8f3ea1f5..cbf39459bdf0 100644
@@ -5,6 +5,7 @@
 #include <linux/array_size.h>
 #include <linux/bitfield.h>
 #include <linux/device.h>
+#include <linux/dmi.h>
 #include <linux/gpio/consumer.h>
 #include <linux/gpio/machine.h>
 #include <linux/i2c.h>
@@ -310,7 +311,8 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 			break;
 		case INT3472_GPIO_TYPE_POWER_ENABLE:
-			ret = skl_int3472_register_regulator(int3472, gpio);
+			ret = skl_int3472_register_regulator(int3472, gpio,
+							     int3472->quirks.avdd_second_sensor);
 			if (ret)
 				err_msg = "Failed to map regulator to sensor\n";
 
@@ -378,13 +380,19 @@ static void skl_int3472_discrete_remove(struct platform_device *pdev)
 static int skl_int3472_discrete_probe(struct platform_device *pdev)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+	const struct int3472_discrete_quirks *quirks = NULL;
 	struct int3472_discrete_device *int3472;
+	const struct dmi_system_id *id;
 	struct int3472_cldb cldb;
 	int ret;
 
 	if (!adev)
 		return -ENODEV;
 
+	id = dmi_first_match(skl_int3472_discrete_quirks);
+	if (id)
+		quirks = id->driver_data;
+
 	ret = skl_int3472_fill_cldb(adev, &cldb);
 	if (ret) {
 		dev_err(&pdev->dev, "Couldn't fill CLDB structure\n");
@@ -408,6 +416,9 @@ static int skl_int3472_discrete_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, int3472);
 	int3472->clock.imgclk_index = cldb.clock_source;
 
+	if (quirks)
+		int3472->quirks = *quirks;
+
 	ret = skl_int3472_get_sensor_adev_and_name(&pdev->dev, &int3472->sensor,
 						   &int3472->sensor_name);
 	if (ret)
drivers/platform/x86/intel/int3472/discrete_quirks.c new file +22 -0
new file mode 100644
index 000000000000..bf88863803b2
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Author: Hans de Goede <[email protected]> */
+
+#include <linux/dmi.h>
+
+#include "common.h"
+
+static const struct int3472_discrete_quirks lenovo_miix_510_quirks = {
+	.avdd_second_sensor = "i2c-OVTI2680:00",
+};
+
+const struct dmi_system_id skl_int3472_discrete_quirks[] = {
+	{
+		/* Lenovo Miix 510-12IKB */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+			DMI_MATCH(DMI_PRODUCT_VERSION, "MIIX 510-12IKB"),
+		},
+		.driver_data = (void *)&lenovo_miix_510_quirks,
+	},
+	{ }
+};
Signature · 1 line
2.49.0
#8 lore raw

PATCH 5/8 platform/x86: int3472: Make regulator supply name configurable

In reply to Hans de Goede

This is a preparation patch for registering multiple regulators, which requires a different supply-name for each regulator. Make supply-name a parameter to skl_int3472_register_regulator() and use con-id to set it so that the existing int3472_gpio_map remapping can be used with it.

Since supply-name now is a parameter, drop the fixed skl_int3472_regulator_map_supplies[] array and instead add lower- + upper-case mappings of the passed in supply-name to the regulator.

---
 .../x86/intel/int3472/clk_and_regulator.c     | 47 ++++++++-----------
 drivers/platform/x86/intel/int3472/common.h   |  6 ++-
 drivers/platform/x86/intel/int3472/discrete.c |  4 +-
 3 files changed, 26 insertions(+), 31 deletions(-)
drivers/platform/x86/intel/int3472/clk_and_regulator.c +19 -28
index 374a99dea7d1..459dbb2cd68a 100644
@@ -185,42 +185,34 @@ void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472)
 	clk_unregister(int3472->clock.clk);
 }
 
-/*
- * The INT3472 device is going to be the only supplier of a regulator for
- * the sensor device. But unlike the clk framework the regulator framework
- * does not allow matching by consumer-device-name only.
- *
- * Ideally all sensor drivers would use "avdd" as supply-id. But for drivers
- * where this cannot be changed because another supply-id is already used in
- * e.g. DeviceTree files an alias for the other supply-id can be added here.
- *
- * Do not forget to update GPIO_REGULATOR_SUPPLY_MAP_COUNT when changing this.
- */
-static const char * const skl_int3472_regulator_map_supplies[] = {
-	"avdd",
-	"AVDD",
-};
-
-static_assert(ARRAY_SIZE(skl_int3472_regulator_map_supplies) ==
-	      GPIO_REGULATOR_SUPPLY_MAP_COUNT);
-
 int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 				   struct gpio_desc *gpio,
+				   const char *supply_name,
 				   const char *second_sensor)
 {
 	struct regulator_init_data init_data = { };
+	struct int3472_gpio_regulator *regulator;
 	struct regulator_config cfg = { };
 	int i, j;
 
-	for (i = 0, j = 0; i < ARRAY_SIZE(skl_int3472_regulator_map_supplies); i++) {
-		int3472->regulator.supply_map[j].supply = skl_int3472_regulator_map_supplies[i];
-		int3472->regulator.supply_map[j].dev_name = int3472->sensor_name;
+	if (strlen(supply_name) >= GPIO_SUPPPLY_NAME_LENGTH) {
+		dev_err(int3472->dev, "supply-name '%s' length too long\n", supply_name);
+		return -EOVERFLOW;
+	}
+
+	regulator = &int3472->regulator;
+	string_upper(regulator->supply_name_upper, supply_name);
+
+	for (i = 0, j = 0; i < GPIO_REGULATOR_SUPPLY_MAP_COUNT; i++) {
+		const char *supply = i ? regulator->supply_name_upper : supply_name;
+
+		regulator->supply_map[j].supply = supply;
+		regulator->supply_map[j].dev_name = int3472->sensor_name;
 		j++;
 
 		if (second_sensor) {
-			int3472->regulator.supply_map[j].supply =
-				skl_int3472_regulator_map_supplies[i];
-			int3472->regulator.supply_map[j].dev_name = second_sensor;
+			regulator->supply_map[j].supply = supply;
+			regulator->supply_map[j].dev_name = second_sensor;
 			j++;
 		}
 	}
@@ -229,9 +221,8 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 	init_data.consumer_supplies = int3472->regulator.supply_map;
 	init_data.num_consumer_supplies = j;
 
-	snprintf(int3472->regulator.regulator_name,
-		 sizeof(int3472->regulator.regulator_name), "%s-regulator",
-		 acpi_dev_name(int3472->adev));
+	snprintf(regulator->regulator_name, sizeof(regulator->regulator_name), "%s-%s",
+		 acpi_dev_name(int3472->adev), supply_name);
 
 	int3472->regulator.rdesc = INT3472_REGULATOR(
 						int3472->regulator.regulator_name,
drivers/platform/x86/intel/int3472/common.h +5 -1
index 3728f3864a84..b0638c29d847 100644
@@ -26,7 +26,9 @@
 #define INT3472_PDEV_MAX_NAME_LEN				23
 #define INT3472_MAX_SENSOR_GPIOS				3
 
-#define GPIO_REGULATOR_NAME_LENGTH				21
+#define GPIO_SUPPPLY_NAME_LENGTH				5
+#define GPIO_REGULATOR_NAME_LENGTH				(12 + GPIO_SUPPPLY_NAME_LENGTH)
+/* lower- + upper-case mapping */
 #define GPIO_REGULATOR_SUPPLY_MAP_COUNT				2
 
 #define INT3472_LED_MAX_NAME_LEN				32
@@ -85,6 +87,7 @@ struct int3472_discrete_device {
 	struct int3472_gpio_regulator {
 		/* SUPPLY_MAP_COUNT * 2 to make room for second sensor mappings */
 		struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2];
+		char supply_name_upper[GPIO_SUPPPLY_NAME_LENGTH];
 		char regulator_name[GPIO_REGULATOR_NAME_LENGTH];
 		struct regulator_dev *rdev;
 		struct regulator_desc rdesc;
@@ -129,6 +132,7 @@ void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472);
 
 int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 				   struct gpio_desc *gpio,
+				   const char *supply_name,
 				   const char *second_sensor);
 void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472);
 
drivers/platform/x86/intel/int3472/discrete.c +2 -2
index cbf39459bdf0..f6dae82739e5 100644
@@ -188,7 +188,7 @@ static void int3472_get_con_id_and_polarity(struct acpi_device *adev, u8 *type,
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
-		*con_id = "power-enable";
+		*con_id = "avdd";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
 	default:
@@ -311,7 +311,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 			break;
 		case INT3472_GPIO_TYPE_POWER_ENABLE:
-			ret = skl_int3472_register_regulator(int3472, gpio,
+			ret = skl_int3472_register_regulator(int3472, gpio, con_id,
 							     int3472->quirks.avdd_second_sensor);
 			if (ret)
 				err_msg = "Failed to map regulator to sensor\n";
Signature · 1 line
2.49.0
#9 lore raw

Re: [PATCH 5/8] platform/x86: int3472: Make regulator supply name configurable

Quoted 8 lines · Hans de Goede

This is a preparation patch for registering multiple regulators, which requires a different supply-name for each regulator. Make supply-name a parameter to skl_int3472_register_regulator() and use con-id to set it so that the existing int3472_gpio_map remapping can be used with it.

Since supply-name now is a parameter, drop the fixed skl_int3472_regulator_map_supplies[] array and instead add lower- + upper-case mappings of the passed in supply-name to the regulator.

...

drivers/platform/x86/intel/int3472/clk_and_regulator.c void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472) · line 198

Quoted 1 line
drivers/platform/x86/intel/int3472/clk_and_regulator.c +1 -0
+	if (strlen(supply_name) >= GPIO_SUPPPLY_NAME_LENGTH) {

Hmm... This can potentially go up to the page fault. If we are _not_ okay with that, strnlen() should be used.

drivers/platform/x86/intel/int3472/clk_and_regulator.c void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472)

Quoted 3 lines
drivers/platform/x86/intel/int3472/clk_and_regulator.c +2 -0
+		dev_err(int3472->dev, "supply-name '%s' length too long\n", supply_name);
 
+		return -EOVERFLOW;

This error code is for integers, we use E2BIG for the string lengths.

Quoted 1 line
drivers/platform/x86/intel/int3472/clk_and_regulator.c +1 -0
+	}
Signature · 2 lines
With Best Regards,
Andy Shevchenko
#10 lore raw

Re: [PATCH 5/8] platform/x86: int3472: Make regulator supply name configurable

Hi Andy,

Thank you for all the reviews.

Quoted 10 lines · Andy Shevchenko
Quoted 8 lines · Hans de Goede

This is a preparation patch for registering multiple regulators, which requires a different supply-name for each regulator. Make supply-name a parameter to skl_int3472_register_regulator() and use con-id to set it so that the existing int3472_gpio_map remapping can be used with it.

Since supply-name now is a parameter, drop the fixed skl_int3472_regulator_map_supplies[] array and instead add lower- + upper-case mappings of the passed in supply-name to the regulator.

Quoted 6 lines

...

drivers/platform/x86/intel/int3472/clk_and_regulator.c void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472) · line 198

Quoted 1 line
drivers/platform/x86/intel/int3472/clk_and_regulator.c +1 -0
+	if (strlen(supply_name) >= GPIO_SUPPPLY_NAME_LENGTH) {

Hmm... This can potentially go up to the page fault. If we are _not_ okay with that, strnlen() should be used.

The supply_name is a const string from our own code in discrete.c, which should never get anywhere near the page-size. This is just a sanity check in case we start using longer names and forget to update the GPIO_SUPPPLY_NAME_LENGTH define.

Quoted 5 lines

drivers/platform/x86/intel/int3472/clk_and_regulator.c void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472)

Quoted 3 lines
drivers/platform/x86/intel/int3472/clk_and_regulator.c +2 -0
+		dev_err(int3472->dev, "supply-name '%s' length too long\n", supply_name);
 
+		return -EOVERFLOW;

This error code is for integers, we use E2BIG for the string lengths.

Ok, will fix for v2.

Regards,

Hans

#11 lore raw

PATCH 6/8 platform/x86: int3472: Prepare for registering more then 1 GPIO regulator

In reply to Hans de Goede

Prepare the discrete code for registering more then 1 GPIO regulator.

---
 .../x86/intel/int3472/clk_and_regulator.c     | 26 ++++++++++++-------
 drivers/platform/x86/intel/int3472/common.h   | 20 ++++++++------
 2 files changed, 28 insertions(+), 18 deletions(-)
drivers/platform/x86/intel/int3472/clk_and_regulator.c +16 -10
index 459dbb2cd68a..93033ced8633 100644
@@ -195,12 +195,17 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 	struct regulator_config cfg = { };
 	int i, j;
 
+	if (int3472->n_regulators >= INT3472_MAX_REGULATORS) {
+		dev_err(int3472->dev, "Too many regulators mapped\n");
+		return -EINVAL;
+	}
+
 	if (strlen(supply_name) >= GPIO_SUPPPLY_NAME_LENGTH) {
 		dev_err(int3472->dev, "supply-name '%s' length too long\n", supply_name);
 		return -EOVERFLOW;
 	}
 
-	regulator = &int3472->regulator;
+	regulator = &int3472->regulators[int3472->n_regulators];
 	string_upper(regulator->supply_name_upper, supply_name);
 
 	for (i = 0, j = 0; i < GPIO_REGULATOR_SUPPLY_MAP_COUNT; i++) {
@@ -218,28 +223,29 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 	}
 
 	init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
-	init_data.consumer_supplies = int3472->regulator.supply_map;
+	init_data.consumer_supplies = regulator->supply_map;
 	init_data.num_consumer_supplies = j;
 
 	snprintf(regulator->regulator_name, sizeof(regulator->regulator_name), "%s-%s",
 		 acpi_dev_name(int3472->adev), supply_name);
 
-	int3472->regulator.rdesc = INT3472_REGULATOR(
-						int3472->regulator.regulator_name,
-						&int3472_gpio_regulator_ops);
+	regulator->rdesc = INT3472_REGULATOR(regulator->regulator_name,
+					     &int3472_gpio_regulator_ops);
 
 	cfg.dev = &int3472->adev->dev;
 	cfg.init_data = &init_data;
 	cfg.ena_gpiod = gpio;
 
-	int3472->regulator.rdev = regulator_register(int3472->dev,
-						     &int3472->regulator.rdesc,
-						     &cfg);
+	regulator->rdev = regulator_register(int3472->dev, &regulator->rdesc, &cfg);
+	if (IS_ERR(regulator->rdev))
+		return PTR_ERR(regulator->rdev);
 
-	return PTR_ERR_OR_ZERO(int3472->regulator.rdev);
+	int3472->n_regulators++;
+	return 0;
 }
 
 void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472)
 {
-	regulator_unregister(int3472->regulator.rdev);
+	for (int i = 0; i < int3472->n_regulators; i++)
+		regulator_unregister(int3472->regulators[i].rdev);
 }
drivers/platform/x86/intel/int3472/common.h +12 -8
index b0638c29d847..9f995028137b 100644
@@ -25,6 +25,7 @@
 
 #define INT3472_PDEV_MAX_NAME_LEN				23
 #define INT3472_MAX_SENSOR_GPIOS				3
+#define INT3472_MAX_REGULATORS					3
 
 #define GPIO_SUPPPLY_NAME_LENGTH				5
 #define GPIO_REGULATOR_NAME_LENGTH				(12 + GPIO_SUPPPLY_NAME_LENGTH)
@@ -76,6 +77,15 @@ struct int3472_discrete_quirks {
 	const char *avdd_second_sensor;
 };
 
+struct int3472_gpio_regulator {
+	/* SUPPLY_MAP_COUNT * 2 to make room for second sensor mappings */
+	struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2];
+	char supply_name_upper[GPIO_SUPPPLY_NAME_LENGTH];
+	char regulator_name[GPIO_REGULATOR_NAME_LENGTH];
+	struct regulator_dev *rdev;
+	struct regulator_desc rdesc;
+};
+
 struct int3472_discrete_device {
 	struct acpi_device *adev;
 	struct device *dev;
@@ -84,14 +94,7 @@ struct int3472_discrete_device {
 
 	const struct int3472_sensor_config *sensor_config;
 
-	struct int3472_gpio_regulator {
-		/* SUPPLY_MAP_COUNT * 2 to make room for second sensor mappings */
-		struct regulator_consumer_supply supply_map[GPIO_REGULATOR_SUPPLY_MAP_COUNT * 2];
-		char supply_name_upper[GPIO_SUPPPLY_NAME_LENGTH];
-		char regulator_name[GPIO_REGULATOR_NAME_LENGTH];
-		struct regulator_dev *rdev;
-		struct regulator_desc rdesc;
-	} regulator;
+	struct int3472_gpio_regulator regulators[INT3472_MAX_REGULATORS];
 
 	struct int3472_clock {
 		struct clk *clk;
@@ -113,6 +116,7 @@ struct int3472_discrete_device {
 
 	unsigned int ngpios; /* how many GPIOs have we seen */
 	unsigned int n_sensor_gpios; /* how many have we mapped to sensor */
+	unsigned int n_regulators; /* how many have we mapped to a regulator */
 	struct gpiod_lookup_table gpios;
 };
 
Signature · 1 line
2.49.0
#12 lore raw

PATCH 7/8 platform/x86: int3472: Add handshake pin support

In reply to Hans de Goede

New Intel Meteor Lake based laptops with IPU6 cameras have a new type 0x12 pin defined in the INT3472 sensor companion device which describes the sensor's GPIOs.

This pin is primarily used on designs with a Lattice FPGA chip which is capable of running the sensor independently of the main CPU for features like presence detection. This pin needs to be driven high to make the FPGA run the power-on sequence of the sensor. After driving the pin high the FPGA "firmware" needs 25ms to comlpete the power-on sequence.

Add support for this modelling the handshake pin as a GPIO driven "dvdd" regulator with a 25 ms enable time. This model was chosen because:

1. Sensor chips don't have a handshake pin, so we need to abstract this in some way which does not require modification to the sensor drivers, sensor drivers using the bulk-regulator API to get avdd + vddio + dvdd is normal. So this will work to get the right value set to the handshake pin without requiring sensor driver modifications.

2. Sensors typically wait only a small time for the sensor to power-on after de-asserting reset. Not the 25ms the Lattice chip requires. Using the regulator framework's enable_time allows hiding the need for this delay from the sensor drivers.

---
 .../x86/intel/int3472/clk_and_regulator.c        |  2 ++
 drivers/platform/x86/intel/int3472/common.h      |  2 ++
 drivers/platform/x86/intel/int3472/discrete.c    | 16 +++++++++++++++-
 3 files changed, 19 insertions(+), 1 deletion(-)
drivers/platform/x86/intel/int3472/clk_and_regulator.c +2 -0
index 93033ced8633..f9d4328c61b5 100644
@@ -187,6 +187,7 @@ void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472)
 
 int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 				   struct gpio_desc *gpio,
+				   unsigned int enable_time,
 				   const char *supply_name,
 				   const char *second_sensor)
 {
@@ -223,6 +224,7 @@ int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 	}
 
 	init_data.constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
+	init_data.constraints.enable_time = enable_time;
 	init_data.consumer_supplies = regulator->supply_map;
 	init_data.num_consumer_supplies = j;
 
drivers/platform/x86/intel/int3472/common.h +2 -0
index 9f995028137b..e1ffc0f6ffe1 100644
@@ -22,6 +22,7 @@
 #define INT3472_GPIO_TYPE_POWER_ENABLE				0x0b
 #define INT3472_GPIO_TYPE_CLK_ENABLE				0x0c
 #define INT3472_GPIO_TYPE_PRIVACY_LED				0x0d
+#define INT3472_GPIO_TYPE_HANDSHAKE				0x12
 
 #define INT3472_PDEV_MAX_NAME_LEN				23
 #define INT3472_MAX_SENSOR_GPIOS				3
@@ -136,6 +137,7 @@ void skl_int3472_unregister_clock(struct int3472_discrete_device *int3472);
 
 int skl_int3472_register_regulator(struct int3472_discrete_device *int3472,
 				   struct gpio_desc *gpio,
+				   unsigned int enable_time,
 				   const char *supply_name,
 				   const char *second_sensor);
 void skl_int3472_unregister_regulator(struct int3472_discrete_device *int3472);
drivers/platform/x86/intel/int3472/discrete.c +15 -1
index f6dae82739e5..903b35f999d0 100644
@@ -191,6 +191,10 @@ static void int3472_get_con_id_and_polarity(struct acpi_device *adev, u8 *type,
 		*con_id = "avdd";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
 		break;
+	case INT3472_GPIO_TYPE_HANDSHAKE:
+		*con_id = "dvdd";
+		*gpio_flags = GPIO_ACTIVE_HIGH;
+		break;
 	default:
 		*con_id = "unknown";
 		*gpio_flags = GPIO_ACTIVE_HIGH;
@@ -290,6 +294,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 	case INT3472_GPIO_TYPE_CLK_ENABLE:
 	case INT3472_GPIO_TYPE_PRIVACY_LED:
 	case INT3472_GPIO_TYPE_POWER_ENABLE:
+	case INT3472_GPIO_TYPE_HANDSHAKE:
 		gpio = skl_int3472_gpiod_get_from_temp_lookup(int3472, agpio, con_id, gpio_flags);
 		if (IS_ERR(gpio)) {
 			ret = PTR_ERR(gpio);
@@ -311,11 +316,20 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 			break;
 		case INT3472_GPIO_TYPE_POWER_ENABLE:
-			ret = skl_int3472_register_regulator(int3472, gpio, con_id,
+			ret = skl_int3472_register_regulator(int3472, gpio, 0, con_id,
 							     int3472->quirks.avdd_second_sensor);
 			if (ret)
 				err_msg = "Failed to map regulator to sensor\n";
 
+			break;
+		case INT3472_GPIO_TYPE_HANDSHAKE:
+			/* Setups using a handshake pin need 25 ms delay */
+			ret = skl_int3472_register_regulator(int3472, gpio,
+							     25 * USEC_PER_MSEC,
+							     con_id, NULL);
+			if (ret)
+				err_msg = "Failed to map regulator to sensor\n";
+
 			break;
 		default: /* Never reached */
 			ret = -EINVAL;
Signature · 1 line
2.49.0
#13 lore raw

PATCH 8/8 platform/x86: int3472: Debug log when remapping pins

In reply to Hans de Goede

Debug log when remapping a pin/function because of a int3472_gpio_map[] match.

---
 drivers/platform/x86/intel/int3472/discrete.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
drivers/platform/x86/intel/int3472/discrete.c +6 -2
index 903b35f999d0..eab4235f4b38 100644
@@ -146,9 +146,10 @@ static const struct int3472_gpio_map int3472_gpio_map[] = {
 	{ "INT347E", INT3472_GPIO_TYPE_RESET, INT3472_GPIO_TYPE_RESET, false, "enable" },
 };
 
-static void int3472_get_con_id_and_polarity(struct acpi_device *adev, u8 *type,
+static void int3472_get_con_id_and_polarity(struct int3472_discrete_device *int3472, u8 *type,
 					    const char **con_id, unsigned long *gpio_flags)
 {
+	struct acpi_device *adev = int3472->sensor;
 	unsigned int i;
 
 	for (i = 0; i < ARRAY_SIZE(int3472_gpio_map); i++) {
@@ -163,6 +164,9 @@ static void int3472_get_con_id_and_polarity(struct acpi_device *adev, u8 *type,
 		if (!acpi_dev_hid_uid_match(adev, int3472_gpio_map[i].hid, NULL))
 			continue;
 
+		dev_dbg(int3472->dev, "mapping type 0x%02x pin to 0x%02x %s\n",
+			*type, int3472_gpio_map[i].type_to, int3472_gpio_map[i].con_id);
+
 		*type = int3472_gpio_map[i].type_to;
 		*gpio_flags = int3472_gpio_map[i].polarity_low ?
 			      GPIO_ACTIVE_LOW : GPIO_ACTIVE_HIGH;
@@ -267,7 +271,7 @@ static int skl_int3472_handle_gpio_resources(struct acpi_resource *ares,
 
 	type = FIELD_GET(INT3472_GPIO_DSM_TYPE, obj->integer.value);
 
-	int3472_get_con_id_and_polarity(int3472->sensor, &type, &con_id, &gpio_flags);
+	int3472_get_con_id_and_polarity(int3472, &type, &con_id, &gpio_flags);
 
 	pin = FIELD_GET(INT3472_GPIO_DSM_PIN, obj->integer.value);
 	/* Pin field is not really used under Windows and wraps around at 8 bits */
Signature · 1 line
2.49.0