staging: rtl8192u: clean up comments in r8192U_dm.c
cover staging: rtl8192u: clean up comments in r8192U_dm.c
Clean up several comments in file r8192U_dm.c
Reviewer feedback on a previous patch suggested additional cleanup comments. Link to the previous patch:
https://lore.kernel.org/outreachy/ZB2a5zwYpBZ%2F6qwU@khadija-virtual-machine/
Khadija Kamran (3):
staging: rtl8192u: reformat block comments
staging: rtl8192u: remove change history from comments
staging: rtl8192u: remove code from comments
drivers/staging/rtl8192u/r8192U_dm.c | 199 ++++----------------------- 1 file changed, 25 insertions(+), 174 deletions(-)
Signature · 1 line
2.34.1
PATCH 1/3 staging: rtl8192u: reformat block comments
Linux kernel coding style for block comments uses a column of '*' on the left side and uses '*/' on a separate line.
Fix block comments by adding '*' on subsequent lines and moving '*/' at the end of block comments on a separate line. These issues in block comments are reported by checkpatch.pl script.
--- drivers/staging/rtl8192u/r8192U_dm.c | 162 ++++++++++++++------------- 1 file changed, 86 insertions(+), 76 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.c +86 -76
@@ -1,19 +1,20 @@// SPDX-License-Identifier: GPL-2.0 /*++ -Copyright-c Realtek Semiconductor Corp. All rights reserved. - -Module Name: -r8192U_dm.c - -Abstract: -HW dynamic mechanism. - -Major Change History: -When Who What ----------- --------------- ------------------------------- -2008-05-14 amy create version 0 porting from windows code. - ---*/ +* Copyright-c Realtek Semiconductor Corp. All rights reserved. +* +* Module Name: +* r8192U_dm.c +* +* Abstract: +* HW dynamic mechanism. +* +* Major Change History: +* When Who What +* ---------- --------------- ------------------------------- +* 2008-05-14 amy create version 0 porting from windows code. +* +*-- +*/ #include "r8192U.h" #include "r8192U_dm.h" #include "r8192U_hw.h"
@@ -147,20 +148,20 @@ void dm_CheckRxAggregation(struct net_device *dev)unsigned long curRxOkCnt =0 ;/* -if (pHalData->bForcedUsbRxAggr) { -if (pHalData->ForcedUsbRxAggrInfo == 0) { -if (pHalData->bCurrentRxAggrEnable) { -Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE); -} -} else { -if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) { -Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE); -} -} -return; -} - -*/ +* if (pHalData->bForcedUsbRxAggr) { +* if (pHalData->ForcedUsbRxAggrInfo == 0) { +* if (pHalData->bCurrentRxAggrEnable) { +* Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE); +* } +* } else { +* if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) { +* Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE); +* } +* } +* return; +* } +* +*/ curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt; curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
@@ -279,7 +280,8 @@ void init_rate_adaptive(struct net_device *dev)* When Who Remark * 05/26/08 amy Create version 0 porting from windows code. * -*---------------------------------------------------------------------------*/ +*--------------------------------------------------------------------------- +*/ static void dm_check_rate_adaptive (struct net_device *dev) {struct r8192_priv *priv =ieee80211_priv (dev);
@@ -377,8 +379,9 @@ static void dm_check_rate_adaptive(struct net_device *dev) targetRATR = pra->ping_rssi_ratr; ping_rssi_state =1 ; } -/*else -DbgPrint("TestRSSI is between the range.\n");*/ +/* else +* DbgPrint("TestRSSI is between the range.\n"); +*/ }else {/*DbgPrint("TestRSSI Recover to 0x%x\n", targetRATR);*/ ping_rssi_state =0 ;
@@ -719,9 +722,10 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev) } tmpCCK40Mindex =0 ; } -/*DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d", -((u1Byte)tmpRegA - pHalData->ThermalMeter[0]), -tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex);*/ +/* DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d", +* ((u1Byte)tmpRegA - pHalData->ThermalMeter[0]), +* tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex); +*/ if (priv->CurrentChannelBW !=HT_CHANNEL_WIDTH_20 )/* 40M */ tmpCCKindex = tmpCCK40Mindex;else
@@ -1594,7 +1598,8 @@ static void dm_bb_initialgain_backup(struct net_device *dev)* When Who Remark * 05/15/2008 amy Create Version 0 porting from windows code. * -*---------------------------------------------------------------------------*/ +*--------------------------------------------------------------------------- +*/ static void dm_dig_init (struct net_device *dev) {struct r8192_priv *priv =ieee80211_priv (dev);
@@ -1638,7 +1643,8 @@ static void dm_dig_init(struct net_device *dev)* Revised History: * When Who Remark * 05/27/2008 amy Create Version 0 porting from windows code. -*---------------------------------------------------------------------------*/ +*--------------------------------------------------------------------------- +*/ static void dm_ctrl_initgain_byrssi (struct net_device *dev) {if (!dm_digtable.dig_enable_flag)
@@ -1680,8 +1686,9 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(else dm_digtable.cur_connect_state =DIG_DISCONNECT ; -/*DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d\n", -DM_DigTable.PreConnectState, DM_DigTable.CurConnectState);*/ +/* DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d\n", +* DM_DigTable.PreConnectState, DM_DigTable.CurConnectState); +*/ dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb;/*DbgPrint("DM_DigTable.Rssi_val = %d\n", DM_DigTable.Rssi_val);*/
@@ -1720,12 +1727,12 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_thresh)) return; -/*DbgPrint("Dig by Fw False Alarm\n");*/ -/*if (DM_DigTable.Dig_State == DM_STA_DIG_OFF)*/ -/*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d", -pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh, -DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/ -/* 1. When RSSI decrease, We have to judge if it is smaller than a threshold +/* DbgPrint("Dig by Fw False Alarm\n"); +* if (DM_DigTable.Dig_State == DM_STA_DIG_OFF) +* DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d", +* pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh, +* DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State); +* 1. When RSSI decrease, We have to judge if it is smaller than a threshold * and then execute the step below. */ if (priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh) {
@@ -1757,12 +1764,12 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. */ write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x00 ); -/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40); -else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E) -else -PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40); -*/ +/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) +* write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40); +* else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E) +* else +* PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40); +*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x42 );
@@ -1814,13 +1821,12 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. */ write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x20 ); -/* -else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); -else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E) -else -PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42); -*/ +/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) +* write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); +* else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E) +* else +* PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42); +*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x44 );
@@ -1855,7 +1861,8 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(* When Who Remark * 05/28/2008 amy Create Version 0 porting from windows code. * -*---------------------------------------------------------------------------*/ +*--------------------------------------------------------------------------- +*/ static void dm_ctrl_initgain_byrssi_highpwr (struct net_device *dev) {
@@ -1882,9 +1889,9 @@ static void dm_ctrl_initgain_byrssi_highpwr(if (priv->CurrentChannelBW !=HT_CHANNEL_WIDTH_20 ) {write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x10 ); -/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); -*/ +/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) +* write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); +*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x43 );
@@ -1899,9 +1906,9 @@ static void dm_ctrl_initgain_byrssi_highpwr(/* 3.2 Recover PD_TH for OFDM for normal power region. */ if (priv->CurrentChannelBW !=HT_CHANNEL_WIDTH_20 ) {write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x20 ); -/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); -*/ +/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) +* write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); +*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x44 );
@@ -2020,9 +2027,9 @@ static void dm_pd_th(* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. */ write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x00 ); -/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); -*/ +/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) +* write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); +*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x42 ); }else if (dm_digtable.curpd_thstate ==DIG_PD_AT_NORMAL_POWER ) {
@@ -2032,18 +2039,18 @@ static void dm_pd_th(* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. */ write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x20 ); -/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); -*/ +/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) +* write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); +*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x44 ); }else if (dm_digtable.curpd_thstate ==DIG_PD_AT_HIGH_POWER ) {/* Higher PD_TH for OFDM for high power state. */ if (priv->CurrentChannelBW !=HT_CHANNEL_WIDTH_20 ) {write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x10 ); -/*else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); -*/ +/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) +* write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); +*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x43 ); }
@@ -2274,7 +2281,8 @@ static void dm_ctstoself(struct net_device *dev)* When Who Remark * 05/28/2008 amy Create Version 0 porting from windows code. * -*---------------------------------------------------------------------------*/ +*--------------------------------------------------------------------------- +*/ static void dm_check_pbc_gpio (struct net_device *dev) {struct r8192_priv *priv =ieee80211_priv (dev);
@@ -2308,7 +2316,8 @@ static void dm_check_pbc_gpio(struct net_device *dev)* When Who Remark * 01/30/2008 MHC Create Version 0. * -*---------------------------------------------------------------------------*/ +*--------------------------------------------------------------------------- +*/ void dm_rf_pathcheck_workitemcallback (struct work_struct *work) {struct delayed_work *dwork =to_delayed_work (work);
@@ -2557,7 +2566,8 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)* When Who Remark * 05/28/2008 amy Create Version 0 porting from windows code. * -*---------------------------------------------------------------------------*/ +*--------------------------------------------------------------------------- +*/ static void dm_check_rx_path_selection (struct net_device *dev) {struct r8192_priv *priv =ieee80211_priv (dev);
Signature · 1 line
2.34.1
Greg KH
maintainerRe: [PATCH 1/3] staging: rtl8192u: reformat block comments
Quoted 73 lines · Khadija Kamran
Linux kernel coding style for block comments uses a column of '*' on the left side and uses '*/' on a separate line.
Fix block comments by adding '*' on subsequent lines and moving '*/' at the end of block comments on a separate line. These issues in block comments are reported by checkpatch.pl script.
Signed-off-by Khadija Kamran <[email protected]>--- drivers/staging/rtl8192u/r8192U_dm.c | 162 ++++++++++++++------------- 1 file changed, 86 insertions(+), 76 deletions(-)drivers/staging/rtl8192u/r8192U_dm.c +19
-28@@ -1,19 +1,20 @@// SPDX-License-Identifier: GPL-2.0 /*++ -Copyright-c Realtek Semiconductor Corp. All rights reserved. - -Module Name: -r8192U_dm.c - -Abstract: -HW dynamic mechanism. - -Major Change History: -When Who What ----------- --------------- ------------------------------- -2008-05-14 amy create version 0 porting from windows code. - ---*/ +* Copyright-c Realtek Semiconductor Corp. All rights reserved. +* +* Module Name: +* r8192U_dm.c +* +* Abstract: +* HW dynamic mechanism. +* +* Major Change History: +* When Who What +* ---------- --------------- ------------------------------- +* 2008-05-14 amy create version 0 porting from windows code. +* +*-- +*/ #include "r8192U.h" #include "r8192U_dm.h" #include "r8192U_hw.h" @@ -147,20 +148,20 @@ void dm_CheckRxAggregation(struct net_device *dev)unsigned long curRxOkCnt =0 ;/* -if (pHalData->bForcedUsbRxAggr) { -if (pHalData->ForcedUsbRxAggrInfo == 0) { -if (pHalData->bCurrentRxAggrEnable) { -Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE); -} -} else { -if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) { -Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE); -} -} -return; -} - -*/ +* if (pHalData->bForcedUsbRxAggr) { +* if (pHalData->ForcedUsbRxAggrInfo == 0) { +* if (pHalData->bCurrentRxAggrEnable) { +* Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE);
drivers/staging/rtl8192u/r8192U_dm.c void dm_CheckRxAggregation(struct net_device *dev) · line 164
Quoted 10 lines
drivers/staging/rtl8192u/r8192U_dm.c +10
-0+* } +* } else { +* if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) { +* Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE); +* } +* } +* return; +* } +* +*/
Do not reformat things, only to remove them in the last commit in the series. Instead, remove the commented out code lines first, and then fix up any remaining ones, that should make the churn much less.
thanks,
greg k-h
Re: [PATCH 1/3] staging: rtl8192u: reformat block comments
Quoted 80 lines · Greg KH
Quoted 79 lines · Khadija Kamran
Linux kernel coding style for block comments uses a column of '*' on the left side and uses '*/' on a separate line.
Fix block comments by adding '*' on subsequent lines and moving '*/' at the end of block comments on a separate line. These issues in block comments are reported by checkpatch.pl script.
Signed-off-by Khadija Kamran <[email protected]>--- drivers/staging/rtl8192u/r8192U_dm.c | 162 ++++++++++++++------------- 1 file changed, 86 insertions(+), 76 deletions(-)drivers/staging/rtl8192u/r8192U_dm.c +25
-28@@ -1,19 +1,20 @@// SPDX-License-Identifier: GPL-2.0 /*++ -Copyright-c Realtek Semiconductor Corp. All rights reserved. - -Module Name: -r8192U_dm.c - -Abstract: -HW dynamic mechanism. - -Major Change History: -When Who What ----------- --------------- ------------------------------- -2008-05-14 amy create version 0 porting from windows code. - ---*/ +* Copyright-c Realtek Semiconductor Corp. All rights reserved. +* +* Module Name: +* r8192U_dm.c +* +* Abstract: +* HW dynamic mechanism. +* +* Major Change History: +* When Who What +* ---------- --------------- ------------------------------- +* 2008-05-14 amy create version 0 porting from windows code. +* +*-- +*/ #include "r8192U.h" #include "r8192U_dm.h" #include "r8192U_hw.h" @@ -147,20 +148,20 @@ void dm_CheckRxAggregation(struct net_device *dev)unsigned long curRxOkCnt =0 ;/* -if (pHalData->bForcedUsbRxAggr) { -if (pHalData->ForcedUsbRxAggrInfo == 0) { -if (pHalData->bCurrentRxAggrEnable) { -Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE); -} -} else { -if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) { -Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE); -} -} -return; -} - -*/ +* if (pHalData->bForcedUsbRxAggr) { +* if (pHalData->ForcedUsbRxAggrInfo == 0) { +* if (pHalData->bCurrentRxAggrEnable) { +* Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE); +* } +* } else { +* if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) { +* Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE); +* } +* }
Quoted 8 lines
drivers/staging/rtl8192u/r8192U_dm.c void dm_CheckRxAggregation(struct net_device *dev) · line 164
Quoted 4 lines
drivers/staging/rtl8192u/r8192U_dm.c +4
-0+* return; +* } +* +*/ Do not reformat things, only to remove them in the last commit in the series. Instead, remove the commented out code lines first, and then fix up any remaining ones, that should make the churn much less.
Hey Greg,
Thank you for the feedback. Let me resend the patchset after doing all the advised changes.
Regards,
Khadija
Quoted 4 lines
thanks,
greg k-h
PATCH 2/3 staging: rtl8192u: remove change history from comments
In reply to Khadija KamranDevelopers use git to browse the file history so revision history is not required in the comments.
Remove the change history information from the comments.
--- drivers/staging/rtl8192u/r8192U_dm.c | 36 ---------------------------- 1 file changed, 36 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.c +0 -36
@@ -8,11 +8,6 @@* Abstract: * HW dynamic mechanism. * -* Major Change History: -* When Who What -* ---------- --------------- ------------------------------- -* 2008-05-14 amy create version 0 porting from windows code. -* *-- */ #include "r8192U.h"
@@ -276,10 +271,6 @@ void init_rate_adaptive(struct net_device *dev)* * Return: NONE * -* Revised History: -* When Who Remark -* 05/26/08 amy Create version 0 porting from windows code. -* *--------------------------------------------------------------------------- */ static void dm_check_rate_adaptive (struct net_device *dev)
@@ -1594,10 +1585,6 @@ static void dm_bb_initialgain_backup(struct net_device *dev)* * Return: NONE * -* Revised History: -* When Who Remark -* 05/15/2008 amy Create Version 0 porting from windows code. -* *--------------------------------------------------------------------------- */ static void dm_dig_init (struct net_device *dev)
@@ -1640,9 +1627,6 @@ static void dm_dig_init(struct net_device *dev)* * Return: NONE * -* Revised History: -* When Who Remark -* 05/27/2008 amy Create Version 0 porting from windows code. *--------------------------------------------------------------------------- */ static void dm_ctrl_initgain_byrssi (struct net_device *dev)
@@ -1857,10 +1841,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(* * Return: NONE * -* Revised History: -* When Who Remark -* 05/28/2008 amy Create Version 0 porting from windows code. -* *--------------------------------------------------------------------------- */ static void dm_ctrl_initgain_byrssi_highpwr(
@@ -2277,10 +2257,6 @@ static void dm_ctstoself(struct net_device *dev)* * Return: NONE * -* Revised History: -* When Who Remark -* 05/28/2008 amy Create Version 0 porting from windows code. -* *--------------------------------------------------------------------------- */ static void dm_check_pbc_gpio (struct net_device *dev)
@@ -2312,10 +2288,6 @@ static void dm_check_pbc_gpio(struct net_device *dev)* * Return: NONE * -* Revised History: -* When Who Remark -* 01/30/2008 MHC Create Version 0. -* *--------------------------------------------------------------------------- */ void dm_rf_pathcheck_workitemcallback (struct work_struct *work)
@@ -2562,10 +2534,6 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)* * Return: NONE * -* Revised History: -* When Who Remark -* 05/28/2008 amy Create Version 0 porting from windows code. -* *--------------------------------------------------------------------------- */ static void dm_check_rx_path_selection (struct net_device *dev)
@@ -2882,10 +2850,6 @@ void dm_check_fsync(struct net_device *dev)* * Return: NONE * -* Revised History: -* When Who Remark -* 03/06/2008 Jacken Create Version 0. -* *--------------------------------------------------------------------------- */ static void dm_init_dynamic_txpower (struct net_device *dev)
Signature · 1 line
2.34.1
Greg KH
maintainerRe: [PATCH 2/3] staging: rtl8192u: remove change history from comments
Quoted 26 lines · Khadija Kamran
Developers use git to browse the file history so revision history is not required in the comments.
Remove the change history information from the comments.Signed-off-by Khadija Kamran <[email protected]>--- drivers/staging/rtl8192u/r8192U_dm.c | 36 ---------------------------- 1 file changed, 36 deletions(-)drivers/staging/rtl8192u/r8192U_dm.c +0
-5@@ -8,11 +8,6 @@* Abstract: * HW dynamic mechanism. * -* Major Change History: -* When Who What -* ---------- --------------- ------------------------------- -* 2008-05-14 amy create version 0 porting from windows code. -* *-- */ #include "r8192U.h"
drivers/staging/rtl8192u/r8192U_dm.c void init_rate_adaptive(struct net_device *dev) · line 274
Quoted 8 lines
drivers/staging/rtl8192u/r8192U_dm.c +0
-4@@ -276,10 +271,6 @@ void init_rate_adaptive(struct net_device *dev)* * Return: NONE * -* Revised History: -* When Who Remark -* 05/26/08 amy Create version 0 porting from windows code. -* *---------------------------------------------------------------------------
You can remove the extra blank comment line as well.
thanks,
greg k-h
Re: [PATCH 2/3] staging: rtl8192u: remove change history from comments
Quoted 4 lines · Greg KH
Quoted 3 lines · Khadija Kamran
Developers use git to browse the file history so revision history is not required in the comments.
Remove the change history information from the comments.
I'm not sure to follow the argument. The file was integrated into the Linux kernel in 2009. So there is no record of the 2008 date in the git history of the Linux kernel. Maybe it's not interesting, but at least the explanation doesn't seem right.
julia
Quoted 39 lines
Quoted 23 lines
Signed-off-by Khadija Kamran <[email protected]>--- drivers/staging/rtl8192u/r8192U_dm.c | 36 ---------------------------- 1 file changed, 36 deletions(-)drivers/staging/rtl8192u/r8192U_dm.c +0
-5@@ -8,11 +8,6 @@* Abstract: * HW dynamic mechanism. * -* Major Change History: -* When Who What -* ---------- --------------- ------------------------------- -* 2008-05-14 amy create version 0 porting from windows code. -* *-- */ #include "r8192U.h" drivers/staging/rtl8192u/r8192U_dm.c void init_rate_adaptive(struct net_device *dev) · line 274
Quoted 8 lines
drivers/staging/rtl8192u/r8192U_dm.c +0
-4@@ -276,10 +271,6 @@ void init_rate_adaptive(struct net_device *dev)* * Return: NONE * -* Revised History: -* When Who Remark -* 05/26/08 amy Create version 0 porting from windows code. -* *--------------------------------------------------------------------------- You can remove the extra blank comment line as well.
thanks,
greg k-h
PATCH 3/3 staging: rtl8192u: remove code from comments
In reply to Khadija KamranWriting code in comments is generally not considered a good coding practice.
Remove all the code comments from the file.
--- drivers/staging/rtl8192u/r8192U_dm.c | 127 +-------------------------- 1 file changed, 2 insertions(+), 125 deletions(-)
drivers/staging/rtl8192u/r8192U_dm.c +2 -125
@@ -50,11 +50,9 @@ static void dm_init_bandwidth_autoswitch(struct net_device *dev);static void dm_bandwidth_autoswitch (struct net_device *dev);/* DM --> TX power control */ -/*static void dm_initialize_txpower_tracking(struct net_device *dev);*/ static void dm_check_txpower_tracking (struct net_device *dev); -/*static void dm_txpower_reset_recovery(struct net_device *dev);*/ /* DM --> Dynamic Init Gain by RSSI */ static void dm_dig_init (struct net_device *dev);
@@ -70,7 +68,6 @@ static void dm_init_ctstoself(struct net_device *dev);/* DM --> EDCA turbo mode control */ static void dm_check_edca_turbo (struct net_device *dev); -/*static void dm_gpio_change_rf(struct net_device *dev);*/ /* DM --> Check PBC */ static void dm_check_pbc_gpio (struct net_device *dev);
@@ -117,7 +114,6 @@ void init_hal_dm(struct net_device *dev)/* Initial TX Power Control for near/far range , add by amy 2008/05/15, porting from windows code. */ dm_init_dynamic_txpower (dev);init_rate_adaptive (dev); -/*dm_initialize_txpower_tracking(dev);*/ dm_dig_init (dev);dm_init_edca_turbo (dev);dm_init_bandwidth_autoswitch (dev);
@@ -142,21 +138,6 @@ void dm_CheckRxAggregation(struct net_device *dev)unsigned long curTxOkCnt =0 ;unsigned long curRxOkCnt =0 ; -/* -* if (pHalData->bForcedUsbRxAggr) { -* if (pHalData->ForcedUsbRxAggrInfo == 0) { -* if (pHalData->bCurrentRxAggrEnable) { -* Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, FALSE); -* } -* } else { -* if (!pHalData->bCurrentRxAggrEnable || (pHalData->ForcedUsbRxAggrInfo != pHalData->LastUsbRxAggrInfoSetting)) { -* Adapter->HalFunc.HalUsbRxAggrHandler(Adapter, TRUE); -* } -* } -* return; -* } -* -*/ curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt; curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;
@@ -190,10 +171,6 @@ void dm_CheckRxAggregation(struct net_device *dev)void hal_dm_watchdog (struct net_device *dev) { -/*struct r8192_priv *priv = ieee80211_priv(dev);*/ - -/*static u8 previous_bssid[6] ={0};*/ -/*Add by amy 2008/05/15 ,porting from windows code.*/ dm_check_rate_adaptive (dev);dm_dynamic_txpower (dev);
@@ -297,7 +274,6 @@ static void dm_check_rate_adaptive(struct net_device *dev)return ;if (priv->ieee80211->state ==IEEE80211_LINKED ) { -/*RT_TRACE(COMP_RATE, "dm_CheckRateAdaptive(): \t");*/ /* Check whether Short GI is enabled */ bshort_gi_enabled = (pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI40MHz) ||
@@ -344,37 +320,27 @@ static void dm_check_rate_adaptive(struct net_device *dev) (pra->low_rssi_thresh_for_ra40M):(pra->low_rssi_thresh_for_ra20M); } -/*DbgPrint("[DM] THresh H/L=%d/%d\n\r", RATR.HighRSSIThreshForRA, RATR.LowRSSIThreshForRA);*/ if (priv->undecorated_smoothed_pwdb >= (long )HighRSSIThreshForRA) { -/*DbgPrint("[DM] RSSI=%d STA=HIGH\n\r", pHalData->UndecoratedSmoothedPWDB);*/ pra->ratr_state =DM_RATR_STA_HIGH ; targetRATR = pra->upper_rssi_threshold_ratr; }else if (priv->undecorated_smoothed_pwdb >= (long )LowRSSIThreshForRA) { -/*DbgPrint("[DM] RSSI=%d STA=Middle\n\r", pHalData->UndecoratedSmoothedPWDB);*/ pra->ratr_state =DM_RATR_STA_MIDDLE ; targetRATR = pra->middle_rssi_threshold_ratr; }else { -/*DbgPrint("[DM] RSSI=%d STA=LOW\n\r", pHalData->UndecoratedSmoothedPWDB);*/ pra->ratr_state =DM_RATR_STA_LOW ; targetRATR = pra->low_rssi_threshold_ratr; }/* cosa add for test */ if (pra->ping_rssi_enable) { -/*pHalData->UndecoratedSmoothedPWDB = 19;*/ if (priv->undecorated_smoothed_pwdb < (long )(pra->ping_rssi_thresh_for_ra+5 )) {if ((priv->undecorated_smoothed_pwdb < (long )pra->ping_rssi_thresh_for_ra) || ping_rssi_state) { -/*DbgPrint("TestRSSI = %d, set RATR to 0x%x\n", pHalData->UndecoratedSmoothedPWDB, pRA->TestRSSIRATR);*/ pra->ratr_state =DM_RATR_STA_LOW ; targetRATR = pra->ping_rssi_ratr; ping_rssi_state =1 ; } -/* else -* DbgPrint("TestRSSI is between the range.\n"); -*/ }else { -/*DbgPrint("TestRSSI Recover to 0x%x\n", targetRATR);*/ ping_rssi_state =0 ; } }
@@ -496,7 +462,6 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)u32 Value;u8 Pwr_Flag;u16 Avg_TSSI_Meas, TSSI_13dBm, Avg_TSSI_Meas_from_driver =0 ; -/*RT_STATUS rtStatus = RT_STATUS_SUCCESS;*/ bool rtStatus = true;u32 delta =0 ;
@@ -518,7 +483,6 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev)if (rtStatus ==RT_STATUS_FAILURE )RT_TRACE (COMP_POWER_TRACKING ,"Set configuration with tx cmd queue fail!\n" );usleep_range (1000 ,2000 ); -/*DbgPrint("hi, vivi, strange\n");*/ for (i =0 ; i <=30 ; i++) {read_nic_byte (dev,0x1ba , &Pwr_Flag);
@@ -564,7 +528,6 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device *dev) TSSI_13dBm = priv->TSSI_13dBm;RT_TRACE (COMP_POWER_TRACKING ,"TSSI_13dBm = %d\n" , TSSI_13dBm); -/*if (abs(Avg_TSSI_Meas_from_driver - TSSI_13dBm) <= E_FOR_TX_POWER_TRACK)*/ /* For MacOS-compatible */ if (Avg_TSSI_Meas_from_driver > TSSI_13dBm) delta = Avg_TSSI_Meas_from_driver - TSSI_13dBm;
@@ -669,7 +632,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev) } } priv->btxpower_trackingInit = true; -/*pHalData->TXPowercount = 0;*/ +return ; }
@@ -713,10 +676,6 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev) } tmpCCK40Mindex =0 ; } -/* DbgPrint("%ddb, tmpOFDMindex = %d, tmpCCK20Mindex = %d, tmpCCK40Mindex = %d", -* ((u1Byte)tmpRegA - pHalData->ThermalMeter[0]), -* tmpOFDMindex, tmpCCK20Mindex, tmpCCK40Mindex); -*/ if (priv->CurrentChannelBW !=HT_CHANNEL_WIDTH_20 )/* 40M */ tmpCCKindex = tmpCCK40Mindex;else
@@ -736,7 +695,6 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device *dev) }if (CCKSwingNeedUpdate) { -/*DbgPrint("Update CCK Swing, CCK_index = %d\n", pHalData->CCK_index);*/ dm_cck_txpower_adjust (dev, priv->bcck_in_ch14); }if (priv->OFDM_index != tmpOFDMindex) {
@@ -1307,7 +1265,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) {struct r8192_priv *priv =ieee80211_priv (dev);static u8 TM_Trigger; -/*DbgPrint("dm_CheckTXPowerTracking()\n");*/ if (!priv->btxpower_tracking)return ;if (priv->txpower_count <=2 ) {
@@ -1318,7 +1275,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)if (!TM_Trigger) {/* Attention!! You have to write all 12bits of data to RF, or it may cause RF to crash * actually write reg0x02 bit1=0, then bit1=1. -* DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n"); */ rtl8192_phy_SetRFReg (dev,RF90_PATH_A ,0x02 , bMask12Bits,0x4d );rtl8192_phy_SetRFReg (dev,RF90_PATH_A ,0x02 , bMask12Bits,0x4f );
@@ -1327,7 +1283,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) TM_Trigger =1 ;return ; } -/*DbgPrint("Schedule TxPowerTrackingWorkItem\n");*/ queue_delayed_work (priv->priv_wq, &priv->txpower_tracking_wq,0 ); TM_Trigger =0 ; }
@@ -1335,7 +1290,6 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev)static void dm_check_txpower_tracking (struct net_device *dev) {struct r8192_priv *priv =ieee80211_priv (dev); -/*static u32 tx_power_track_counter = 0;*/ #ifdef RTL8190P dm_CheckTXPowerTracking_TSSI (dev);
@@ -1420,7 +1374,6 @@ static void dm_CCKTxPowerAdjust_ThermalMeter(struct net_device *dev, bool bInCHRT_TRACE (COMP_POWER_TRACKING ,"CCK not chnl 14, reg 0x%x = 0x%x\n" , rCCK0_DebugPort, TempVal); }else { -/*priv->CCKTxPowerAdjustCntNotCh14++; cosa add for debug.*/ /* Write 0xa22 0xa23 */ TempVal = CCKSwingTable_Ch14[priv->CCK_index][0 ] + (CCKSwingTable_Ch14[priv->CCK_index][1 ]<<8 );
@@ -1503,10 +1456,7 @@ void dm_restore_dynamic_mechanism_state(struct net_device *dev) ratr_value = reg_ratr;if (priv->rf_type ==RF_1T2R ) {/* 1T2R, Spatial Stream 2 should be disabled */ ratr_value &= ~(RATE_ALL_OFDM_2SS ); -/*DbgPrint("HW_VAR_TATR_0 from 0x%x ==> 0x%x\n", ((pu4Byte)(val))[0], ratr_value);*/ } -/*DbgPrint("set HW_VAR_TATR_0 = 0x%x\n", ratr_value);*/ -/*cosa PlatformEFIOWrite4Byte(Adapter, RATR0, ((pu4Byte)(val))[0]);*/ write_nic_dword (dev,RATR0 , ratr_value);write_nic_byte (dev,UFWP ,1 ); }
@@ -1528,7 +1478,6 @@ static void dm_bb_initialgain_restore(struct net_device *dev)return ;/* Disable Initial Gain */ -/*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);*/ rtl8192_setBBreg (dev,UFWP , bMaskByte1,0x8 );/* Only clear byte 1 and rewrite. */ rtl8192_setBBreg (dev, rOFDM0_XAAGCCore1, bit_mask, (u32 )priv->initgain_backup.xaagccore1);rtl8192_setBBreg (dev, rOFDM0_XBAGCCore1, bit_mask, (u32 )priv->initgain_backup.xbagccore1);
@@ -1543,7 +1492,6 @@ static void dm_bb_initialgain_restore(struct net_device *dev)RT_TRACE (COMP_DIG ,"dm_BBInitialGainRestore 0xc68 is %x\n" , priv->initgain_backup.xdagccore1);RT_TRACE (COMP_DIG ,"dm_BBInitialGainRestore 0xa0a is %x\n" , priv->initgain_backup.cca);/* Enable Initial Gain */ -/*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x100);*/ rtl8192_setBBreg (dev,UFWP , bMaskByte1,0x1 );/* Only clear byte 1 and rewrite. */ }/* dm_BBInitialGainRestore */
@@ -1556,7 +1504,6 @@ static void dm_bb_initialgain_backup(struct net_device *dev)if (dm_digtable.dig_algorithm ==DIG_ALGO_BY_RSSI )return ; -/*PHY_SetBBReg(Adapter, UFWP, bMaskLWord, 0x800);*/ rtl8192_setBBreg (dev,UFWP , bMaskByte1,0x8 );/* Only clear byte 1 and rewrite. */ priv->initgain_backup.xaagccore1 = (u8 )rtl8192_QueryBBReg (dev, rOFDM0_XAAGCCore1, bit_mask); priv->initgain_backup.xbagccore1 = (u8 )rtl8192_QueryBBReg (dev, rOFDM0_XBAGCCore1, bit_mask);
@@ -1638,7 +1585,6 @@ static void dm_ctrl_initgain_byrssi(struct net_device *dev)dm_ctrl_initgain_byrssi_by_fwfalse_alarm (dev); else if (dm_digtable.dig_algorithm == DIG_ALGO_BY_RSSI) dm_ctrl_initgain_byrssi_by_driverrssi(dev); -/* ; */ else return; }
@@ -1653,7 +1599,6 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(if (!dm_digtable.dig_enable_flag)return ; -/*DbgPrint("Dig by Sw Rssi\n");*/ if (dm_digtable.dig_algorithm_switch)/* if switched algorithm, we have to disable FW Dig. */ fw_dig =0 ;
@@ -1670,12 +1615,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi(else dm_digtable.cur_connect_state =DIG_DISCONNECT ; -/* DbgPrint("DM_DigTable.PreConnectState = %d, DM_DigTable.CurConnectState = %d\n", -* DM_DigTable.PreConnectState, DM_DigTable.CurConnectState); -*/ - dm_digtable.rssi_val = priv->undecorated_smoothed_pwdb; -/*DbgPrint("DM_DigTable.Rssi_val = %d\n", DM_DigTable.Rssi_val);*/ dm_initial_gain (dev);dm_pd_th (dev);dm_cs_ratio (dev);
@@ -1711,12 +1651,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( (priv->undecorated_smoothed_pwdb < dm_digtable.rssi_high_thresh)) return; -/* DbgPrint("Dig by Fw False Alarm\n"); -* if (DM_DigTable.Dig_State == DM_STA_DIG_OFF) -* DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d", -* pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh, -* DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State); -* 1. When RSSI decrease, We have to judge if it is smaller than a threshold +/* 1. When RSSI decrease, We have to judge if it is smaller than a threshold * and then execute the step below. */ if (priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh) {
@@ -1748,12 +1683,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. */ write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x00 ); -/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -* write_nic_byte(pAdapter, rOFDM0_RxDetector1, 0x40); -* else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E) -* else -* PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x40); -*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x42 );
@@ -1761,7 +1690,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(write_nic_byte (dev,0xa0a ,0x08 );/* 1.5 Higher EDCCA. */ -/*PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x325);*/ return ; }
@@ -1782,7 +1710,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( reset_cnt = priv->reset_count; dm_digtable.dig_state =DM_STA_DIG_ON ; -/*DbgPrint("DIG ON\n\r");*/ /* 2.1 Set initial gain. * 2008/02/26 MH SD3-Jerry suggest to prevent dirty environment.
@@ -1805,12 +1732,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. */ write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x20 ); -/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -* write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); -* else if (pAdapter->HardwareType == HARDWARE_TYPE_RTL8192E) -* else -* PlatformEFIOWrite1Byte(pAdapter, rOFDM0_RxDetector1, 0x42); -*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x44 );
@@ -1820,7 +1741,6 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm(/* 2.4 Lower EDCCA. * 2008/01/11 MH 90/92 series are the same. */ -/*PlatformEFIOWrite4Byte(pAdapter, rOFDM0_ECCAThreshold, 0x346);*/ /* 2.5 DIG On. */ rtl8192_setBBreg (dev,UFWP , bMaskByte1,0x1 );/* Only clear byte 1 and rewrite. */
@@ -1868,11 +1788,6 @@ static void dm_ctrl_initgain_byrssi_highpwr(/* 3.1 Higher PD_TH for OFDM for high power state. */ if (priv->CurrentChannelBW !=HT_CHANNEL_WIDTH_20 ) {write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x10 ); - -/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -* write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); -*/ - }else write_nic_byte (dev, rOFDM0_RxDetector1,0x43 ); }else {
@@ -1886,10 +1801,6 @@ static void dm_ctrl_initgain_byrssi_highpwr(/* 3.2 Recover PD_TH for OFDM for normal power region. */ if (priv->CurrentChannelBW !=HT_CHANNEL_WIDTH_20 ) {write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x20 ); -/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -* write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); -*/ - }else write_nic_byte (dev, rOFDM0_RxDetector1,0x44 ); }
@@ -1931,7 +1842,6 @@ static void dm_initial_gain( dm_digtable.cur_ig_value = priv->DefaultInitialGain[0 ]; dm_digtable.pre_ig_value =0 ; } -/*DbgPrint("DM_DigTable.CurIGValue = 0x%x, DM_DigTable.PreIGValue = 0x%x\n", DM_DigTable.CurIGValue, DM_DigTable.PreIGValue);*/ /* if silent reset happened, we should rewrite the values back */ if (priv->reset_count != reset_cnt) {
@@ -1947,7 +1857,6 @@ static void dm_initial_gain(if ((dm_digtable.pre_ig_value != dm_digtable.cur_ig_value) || !initialized || force_write) { initial_gain = (u8 )dm_digtable.cur_ig_value; -/*DbgPrint("Write initial gain = 0x%x\n", initial_gain);*/ /* Set initial gain. */ write_nic_byte (dev, rOFDM0_XAAGCCore1, initial_gain);write_nic_byte (dev, rOFDM0_XBAGCCore1, initial_gain);
@@ -1999,7 +1908,6 @@ static void dm_pd_th( {if ((dm_digtable.prepd_thstate != dm_digtable.curpd_thstate) || (initialized <=3 ) || force_write) { -/*DbgPrint("Write PD_TH state = %d\n", DM_DigTable.CurPD_THState);*/ if (dm_digtable.curpd_thstate ==DIG_PD_AT_LOW_POWER ) {/* Lower PD_TH for OFDM. */ if (priv->CurrentChannelBW !=HT_CHANNEL_WIDTH_20 ) {
@@ -2007,9 +1915,6 @@ static void dm_pd_th(* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. */ write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x00 ); -/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -* write_nic_byte(dev, rOFDM0_RxDetector1, 0x40); -*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x42 ); }else if (dm_digtable.curpd_thstate ==DIG_PD_AT_NORMAL_POWER ) {
@@ -2019,18 +1924,12 @@ static void dm_pd_th(* 2008/02/05 MH SD3-Jerry 92U/92E PD_TH are the same. */ write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x20 ); -/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -* write_nic_byte(dev, rOFDM0_RxDetector1, 0x42); -*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x44 ); }else if (dm_digtable.curpd_thstate ==DIG_PD_AT_HIGH_POWER ) {/* Higher PD_TH for OFDM for high power state. */ if (priv->CurrentChannelBW !=HT_CHANNEL_WIDTH_20 ) {write_nic_byte (dev, (rOFDM0_XATxAFE+3 ),0x10 ); -/* else if (priv->card_8192 == HARDWARE_TYPE_RTL8190P) -* write_nic_byte(dev, rOFDM0_RxDetector1, 0x41); -*/ }else write_nic_byte (dev, rOFDM0_RxDetector1,0x43 ); }
@@ -2077,7 +1976,6 @@ static void dm_cs_ratio( {if ((dm_digtable.precs_ratio_state != dm_digtable.curcs_ratio_state) || !initialized || force_write) { -/*DbgPrint("Write CS_ratio state = %d\n", DM_DigTable.CurCS_ratioState);*/ if (dm_digtable.curcs_ratio_state ==DIG_CS_RATIO_LOWER ) {/* Lower CS ratio for CCK. */ write_nic_byte (dev,0xa0a ,0x08 );
@@ -2106,7 +2004,6 @@ static void dm_check_edca_turbo( {struct r8192_priv *priv =ieee80211_priv (dev);PRT_HIGH_THROUGHPUT pHTInfo = priv->ieee80211->pHTInfo; -/*PSTA_QOS pStaQos = pMgntInfo->pStaQos;*/ /* Keep past Tx/Rx packet count for RT-to-RT EDCA turbo. */ static unsigned long lastTxOkCnt;
@@ -2123,20 +2020,17 @@ static void dm_check_edca_turbo(if (priv->ieee80211->pHTInfo->IOTAction &HT_IOT_ACT_DISABLE_EDCA_TURBO ) goto dm_CheckEdcaTurbo_EXIT; -/*printk("========>%s():bis_any_nonbepkts is %d\n", __func__, priv->bis_any_nonbepkts);*/ /* Check the status for current condition. */ if (!priv->ieee80211->bis_any_nonbepkts) { curTxOkCnt = priv->stats.txbytesunicast - lastTxOkCnt; curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;/* For RT-AP, we needs to turn it on when Rx>Tx */ if (curRxOkCnt >4 *curTxOkCnt) { -/*printk("%s():curRxOkCnt > 4*curTxOkCnt\n");*/ if (!priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) {write_nic_dword (dev,EDCAPARA_BE , edca_setting_DL[pHTInfo->IOTPeer]); priv->bis_cur_rdlstate = true; } }else { -/*printk("%s():curRxOkCnt < 4*curTxOkCnt\n");*/ if (priv->bis_cur_rdlstate || !priv->bcurrent_turbo_EDCA) {write_nic_dword (dev,EDCAPARA_BE , edca_setting_UL[pHTInfo->IOTPeer]); priv->bis_cur_rdlstate = false;
@@ -2236,7 +2130,6 @@ static void dm_ctstoself(struct net_device *dev) curRxOkCnt = priv->stats.rxbytesunicast - lastRxOkCnt;if (curRxOkCnt >4 *curTxOkCnt) {/* downlink, disable CTS to self */ pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF ; -/*DbgPrint("dm_CTSToSelf() ==> CTS to self disabled -- downlink\n");*/ }else {/* uplink */ pHTInfo->IOTAction |=HT_IOT_ACT_FORCED_CTS2SELF ; }
@@ -2295,7 +2188,6 @@ void dm_rf_pathcheck_workitemcallback(struct work_struct *work)struct delayed_work *dwork =to_delayed_work (work); struct r8192_priv *priv = container_of(dwork, struct r8192_priv, rfpath_check_wq);struct net_device *dev = priv->ieee80211->dev; -/*bool bactually_set = false;*/ u8 rfpath =0 , i;/* 2008/01/30 MH After discussing with SD3 Jerry, 0xc04/0xd04 register will
@@ -2359,7 +2251,6 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)if (priv->ieee80211->mode ==WIRELESS_MODE_B ) { DM_RxPathSelTable.cck_method =CCK_RX_VERSION_2 ;/* pure B mode, fixed cck version2 */ -/*DbgPrint("Pure B mode, use cck rx version2\n");*/ }/* decide max/sec/min rssi index */
@@ -2512,7 +2403,6 @@ static void dm_rxpath_sel_byrssi(struct net_device *dev)if ((DM_RxPathSelTable.disabled_rf >> i) &0x1 ) {/* disabled rf */ if (tmp_max_rssi >= DM_RxPathSelTable.rf_enable_rssi_th[i]) {/* enable the BB Rx path */ -/*DbgPrint("RF-%d is enabled.\n", 0x1<<i);*/ rtl8192_setBBreg (dev, rOFDM0_TRxPathEnable,0x1 <<i,0x1 );/* 0xc04[3:0] */ rtl8192_setBBreg (dev, rOFDM1_TRxPathEnable,0x1 <<i,0x1 );/* 0xd04[3:0] */ DM_RxPathSelTable.rf_enable_rssi_th[i] =100 ;
@@ -2734,7 +2624,6 @@ void dm_check_fsync(struct net_device *dev)#define RegC38_NonFsync_Other_AP 1#define RegC38_Fsync_AP_BCM 2struct r8192_priv *priv =ieee80211_priv (dev); -/*u32 framesyncC34;*/ static u8 reg_c38_State = RegC38_Default;static u32 reset_cnt;
@@ -2809,14 +2698,12 @@ void dm_check_fsync(struct net_device *dev)if (reg_c38_State) {write_nic_byte (dev, rOFDM0_RxDetector3, priv->framesync); reg_c38_State = RegC38_Default; -/*DbgPrint("Fsync is idle, rssi>=40, write 0xc38 = 0x%x\n", pHalData->framesync);*/ } } }else {if (reg_c38_State) {write_nic_byte (dev, rOFDM0_RxDetector3, priv->framesync); reg_c38_State = RegC38_Default; -/*DbgPrint("Fsync is idle, not connected, write 0xc38 = 0x%x\n", pHalData->framesync);*/ } } }
@@ -2826,13 +2713,11 @@ void dm_check_fsync(struct net_device *dev)write_nic_byte (dev, rOFDM0_RxDetector3, priv->framesync); reg_c38_State = RegC38_Default; reset_cnt = priv->reset_count; -/*DbgPrint("reg_c38_State = 0 for silent reset.\n");*/ } }else {if (reg_c38_State) {write_nic_byte (dev, rOFDM0_RxDetector3, priv->framesync); reg_c38_State = RegC38_Default; -/*DbgPrint("framesync no monitor, write 0xc38 = 0x%x\n", pHalData->framesync);*/ } } }
@@ -2875,7 +2760,6 @@ static void dm_dynamic_txpower(struct net_device *dev) priv->bDynamicTxLowPower = false;return ; } -/*printk("priv->ieee80211->current_network.unknown_cap_exist is %d , priv->ieee80211->current_network.broadcom_cap_exist is %d\n", priv->ieee80211->current_network.unknown_cap_exist, priv->ieee80211->current_network.broadcom_cap_exist);*/ if ((priv->ieee80211->current_network.atheros_cap_exist) && (priv->ieee80211->mode ==IEEE_G )) { txhipower_threshold =TX_POWER_ATHEROAP_THRESH_HIGH ; txlowpower_threshold =TX_POWER_ATHEROAP_THRESH_LOW ;
@@ -2884,7 +2768,6 @@ static void dm_dynamic_txpower(struct net_device *dev) txlowpower_threshold =TX_POWER_NEAR_FIELD_THRESH_LOW ; } -/*printk("=======>%s(): txhipower_threshold is %d, txlowpower_threshold is %d\n", __func__, txhipower_threshold, txlowpower_threshold);*/ RT_TRACE (COMP_TXAGC ,"priv->undecorated_smoothed_pwdb = %ld\n" , priv->undecorated_smoothed_pwdb);if (priv->ieee80211->state ==IEEE80211_LINKED ) {
@@ -2903,7 +2786,6 @@ static void dm_dynamic_txpower(struct net_device *dev) priv->bDynamicTxLowPower = false; } }else { -/*pHalData->bTXPowerCtrlforNearFarRange = !pHalData->bTXPowerCtrlforNearFarRange;*/ priv->bDynamicTxHighPower = false; priv->bDynamicTxLowPower = false; }
@@ -2917,7 +2799,6 @@ static void dm_dynamic_txpower(struct net_device *dev)#endif rtl8192_phy_setTxPower (dev, priv->ieee80211->current_network.channel); -/*pHalData->bStartTxCtrlByTPCNFR = FALSE; Clear th flag of Set TX Power from Sitesurvey*/ } priv->bLastDTPFlag_High = priv->bDynamicTxHighPower; priv->bLastDTPFlag_Low = priv->bDynamicTxLowPower;
@@ -2930,14 +2811,10 @@ static void dm_check_txrateandretrycount(struct net_device *dev)struct r8192_priv *priv =ieee80211_priv (dev);struct ieee80211_device *ieee = priv->ieee80211;/* for 11n tx rate */ -/*priv->stats.CurrentShowTxate = read_nic_byte(dev, CURRENT_TX_RATE_REG);*/ read_nic_byte (dev,CURRENT_TX_RATE_REG , &ieee->softmac_stats.CurrentShowTxate); -/*printk("=============>tx_rate_reg:%x\n", ieee->softmac_stats.CurrentShowTxate);*/ /* for initial tx rate */ -/*priv->stats.last_packet_rate = read_nic_byte(dev, INITIAL_TX_RATE_REG);*/ read_nic_byte (dev,INITIAL_TX_RATE_REG , &ieee->softmac_stats.last_packet_rate);/* for tx retry count */ -/*priv->stats.txretrycount = read_nic_dword(dev, TX_RETRY_COUNT_REG);*/ read_nic_dword (dev,TX_RETRY_COUNT_REG , &ieee->softmac_stats.txretrycount); }
Signature · 1 line
2.34.1
Greg KH
maintainerRe: [PATCH 3/3] staging: rtl8192u: remove code from comments
Quoted 3 lines · Khadija Kamran
Writing code in comments is generally not considered a good coding practice.
Remove all the code comments from the file.
How about something like:
Remove all of the commented out code lines as they are not being used and can be brought back in the future if they are ever needed again.
And the subject reads a bit odd too, how about:
staging: rtl8192u: remove commented out code
Quoted 11 lines
Signed-off-by Khadija Kamran <[email protected]>--- drivers/staging/rtl8192u/r8192U_dm.c | 127 +-------------------------- 1 file changed, 2 insertions(+), 125 deletions(-)drivers/staging/rtl8192u/r8192U_dm.c +0
-0
drivers/staging/rtl8192u/r8192U_dm.c static void dm_init_bandwidth_autoswitch(struct net_device *dev); · line 56
Quoted 9 lines
drivers/staging/rtl8192u/r8192U_dm.c +0
-2@@ -50,11 +50,9 @@ static void dm_init_bandwidth_autoswitch(struct net_device *dev);static void dm_bandwidth_autoswitch (struct net_device *dev);/* DM --> TX power control */ -/*static void dm_initialize_txpower_tracking(struct net_device *dev);*/ static void dm_check_txpower_tracking (struct net_device *dev); -/*static void dm_txpower_reset_recovery(struct net_device *dev);*/
The extra blank lines can now go away as well, at the same time, right?
thanks,
greg k-h