drm/i915/display/dp: On AUX xfer timeout restart freshly
Subsystems (3)
PATCH v2 1/1 drm/i915/display/dp: On AUX xfer timeout restart freshly
At the begining of the aux transfer a check for aux control busy bit is done. Then as per the spec on aux transfer timeout, need to retry freshly for 3 times with a delay which is taken care by the control register.
On each of these 3 trials a check for busy has to be done so as to start freshly.
v2: updated the commit message
--- drivers/gpu/drm/i915/display/intel_dp_aux.c | 50 +++++++++------------ 1 file changed, 22 insertions(+), 28 deletions(-)
drivers/gpu/drm/i915/display/intel_dp_aux.c +22 -28
@@ -273,30 +273,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,* it using the same AUX CH simultaneously */ -/* Try to wait for any previous AUX channel activity */ -for (try =0 ; try <3 ; try++) { - status =intel_de_read_notrace (i915, ch_ctl); -if ((status &DP_AUX_CH_CTL_SEND_BUSY ) ==0 ) -break ; -msleep (1 ); - } -/* just trace the final value */ -trace_i915_reg_rw (false, ch_ctl, status,sizeof (status), true); - -if (try ==3 ) { -const u32 status =intel_de_read (i915, ch_ctl); - -if (status != intel_dp->aux_busy_last_status) { -drm_WARN (&i915->drm,1 , -"%s: not started (status 0x%08x)\n" , - intel_dp->aux.name, status); - intel_dp->aux_busy_last_status = status; - } - - ret = -EBUSY ; - goto out; - } -/* Only 5 data registers! */ if (drm_WARN_ON (&i915->drm, send_bytes >20 || recv_size >20 )) { ret = -E2BIG ;
@@ -304,14 +280,31 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp, }while ((aux_clock_divider = intel_dp->get_aux_clock_divider (intel_dp, clock++))) { -u32 send_ctl = intel_dp->get_aux_send_ctl (intel_dp, +/* Must try at least 3 times according to DP spec */ +for (try =0 ; try <5 ; try++) { +u32 send_ctl = intel_dp->get_aux_send_ctl (intel_dp, send_bytes, aux_clock_divider); - send_ctl |= aux_send_ctl_flags; + send_ctl |= aux_send_ctl_flags; + +/* Try to wait for any previous AUX channel activity */ + status =intel_dp_aux_wait_done (intel_dp); +/* just trace the final value */ +trace_i915_reg_rw (false, ch_ctl, status,sizeof (status), true); + +if (status &DP_AUX_CH_CTL_SEND_BUSY ) { +drm_WARN (&i915->drm,1 , +"%s: not started, previous Tx still in process (status 0x%08x)\n" , + intel_dp->aux.name, status); + intel_dp->aux_busy_last_status = status; +if (try >3 ) { + ret = -EBUSY ; + goto out; + }else +continue ; + } -/* Must try at least 3 times according to DP spec */ -for (try =0 ; try <5 ; try++) {/* Load the send data into the aux channel data registers */ for (i =0 ; i < send_bytes; i +=4 ) intel_de_write(i915, ch_data[i >> 2],
@@ -321,6 +314,7 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,/* Send the command and wait for it to complete */ intel_de_write (i915, ch_ctl, send_ctl); +/* TODO: if typeC then 4.2ms else 800us. For DG2 add 1.5ms for both cases */ status =intel_dp_aux_wait_done (intel_dp);/* Clear done status and any errors */
Signature · 1 line
2.25.1
Patchwork
CI[Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for drm/i915/display/dp: On AUX xfer timeout restart freshly (rev2)
== Series Details ==
== Series Details ==
Series: drm/i915/display/dp: On AUX xfer timeout restart freshly (rev2)
URL : https://patchwork.freedesktop.org/series/119055/
State : warning
== Summary ==
Error: dim checkpatch failed2a1723da181b drm/i915/display/dp: On AUX xfer timeout restart freshly -:6: WARNING:TYPO_SPELLING: 'begining' may be misspelled - perhaps 'beginning'? #6:
At the begining of the aux transfer a check for aux control busy bit is
^^^^^^^^
-:79: CHECK:BRACES: Unbalanced braces around else statement #79: FILE: drivers/gpu/drm/i915/display/intel_dp_aux.c:304:
+ } else
total: 0 errors, 1 warnings, 1 checks, 72 lines checked
Patchwork
CI[Intel-gfx] ✓ Fi.CI.BAT: success for drm/i915/display/dp: On AUX xfer timeout restart freshly (rev2)
In reply to Arun R Murthy== Series Details ==
== Series Details ==
Series: drm/i915/display/dp: On AUX xfer timeout restart freshly (rev2)
URL : https://patchwork.freedesktop.org/series/119055/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13249 -> Patchwork_119055v2
====================================================
Summary
-------
**SUCCESS**
No regressions found.
External URL: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/index.html
Participating hosts (34 -> 34)
------------------------------
No changes in participating hosts
Possible new issues
-------------------
Here are the unknown changes that may have been introduced in Patchwork_119055v2:
### IGT changes ###
#### Suppressed ####
The following results come from untrusted machines, tests, or statuses. They do not affect the overall result.
* igt@kms_force_connector_basic@prune-stale-modes:
- {bat-adlp-11}: [SKIP][1] ([i915#4093]) -> [FAIL][2]
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/bat-adlp-11/igt@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/bat-adlp-11/igt@[email protected]
Known issues
------------
Here are the changes found in Patchwork_119055v2 that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@i915_suspend@basic-s3-without-i915:
- bat-rpls-1: NOTRUN -> [ABORT][3] ([i915#6687] / [i915#7978])
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/bat-rpls-1/igt@[email protected]
* igt@kms_chamelium_hpd@common-hpd-after-suspend:
- bat-dg1-7: NOTRUN -> [SKIP][4] ([i915#7828])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/bat-dg1-7/igt@[email protected]
* igt@kms_pipe_crc_basic@suspend-read-crc:
- bat-dg1-7: NOTRUN -> [SKIP][5] ([i915#1845] / [i915#4078])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/bat-dg1-7/igt@[email protected]
#### Possible fixes ####
* igt@i915_selftest@live@hangcheck:
- bat-dg1-7: [ABORT][6] ([i915#4983]) -> [PASS][7]
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/bat-dg1-7/igt@i915_selftest@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/bat-dg1-7/igt@i915_selftest@[email protected]
* igt@i915_selftest@live@reset:
- bat-rpls-1: [ABORT][8] ([i915#4983] / [i915#7461] / [i915#8347] / [i915#8384]) -> [PASS][9]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/bat-rpls-1/igt@i915_selftest@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/bat-rpls-1/igt@i915_selftest@[email protected]
* {igt@kms_pipe_crc_basic@compare-crc-sanitycheck-xr24@pipe-c-dp-5}:
- {bat-adlp-11}: [ABORT][10] ([i915#4423]) -> [PASS][11]
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/bat-adlp-11/igt@kms_pipe_crc_basic@[email protected]
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/bat-adlp-11/igt@kms_pipe_crc_basic@[email protected]
* {igt@kms_pipe_crc_basic@compare-crc-sanitycheck-xr24@pipe-d-dp-5}:
- {bat-adlp-11}: [DMESG-WARN][12] ([i915#4309] / [i915#4423]) -> [PASS][13]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/bat-adlp-11/igt@kms_pipe_crc_basic@[email protected]
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/bat-adlp-11/igt@kms_pipe_crc_basic@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4093]: https://gitlab.freedesktop.org/drm/intel/issues/4093
[i915#4309]: https://gitlab.freedesktop.org/drm/intel/issues/4309
[i915#4423]: https://gitlab.freedesktop.org/drm/intel/issues/4423
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#6121]: https://gitlab.freedesktop.org/drm/intel/issues/6121
[i915#6687]: https://gitlab.freedesktop.org/drm/intel/issues/6687
[i915#6868]: https://gitlab.freedesktop.org/drm/intel/issues/6868
[i915#7461]: https://gitlab.freedesktop.org/drm/intel/issues/7461
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#7978]: https://gitlab.freedesktop.org/drm/intel/issues/7978
[i915#8347]: https://gitlab.freedesktop.org/drm/intel/issues/8347
[i915#8384]: https://gitlab.freedesktop.org/drm/intel/issues/8384
Build changes
-------------
* Linux: CI_DRM_13249 -> Patchwork_119055v2
CI-20190529: 20190529
CI_DRM_13249: e5065ee5a0b23e3f970315def269ac363bcb212f @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_7322: 2dd77d6d827a308caae49ce3eba759c2bab394ed @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_119055v2: e5065ee5a0b23e3f970315def269ac363bcb212f @ git://anongit.freedesktop.org/gfx-ci/linux
### Linux commits
b4e7033c717d drm/i915/display/dp: On AUX xfer timeout restart freshly
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/index.html
Patchwork
CI[Intel-gfx] ✓ Fi.CI.IGT: success for drm/i915/display/dp: On AUX xfer timeout restart freshly (rev2)
In reply to Arun R Murthy== Series Details ==
== Series Details ==
Series: drm/i915/display/dp: On AUX xfer timeout restart freshly (rev2)
URL : https://patchwork.freedesktop.org/series/119055/
State : success
== Summary ==
CI Bug Log - changes from CI_DRM_13249_full -> Patchwork_119055v2_full
====================================================
Summary
-------
**SUCCESS**
No regressions found.
Participating hosts (7 -> 7)
------------------------------
No changes in participating hosts
Known issues
------------
Here are the changes found in Patchwork_119055v2_full that come from known issues:
### IGT changes ###
#### Issues hit ####
* igt@gem_barrier_race@remote-request@rcs0:
- shard-apl: [PASS][1] -> [ABORT][2] ([i915#7461] / [i915#8190])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-apl6/igt@gem_barrier_race@[email protected]
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-apl4/igt@gem_barrier_race@[email protected]
* igt@gem_exec_balancer@parallel-ordering:
- shard-glk: NOTRUN -> [SKIP][3] ([fdo#109271]) +18 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk7/igt@[email protected]
* igt@gem_lmem_swapping@parallel-random:
- shard-apl: NOTRUN -> [SKIP][4] ([fdo#109271] / [i915#4613])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-apl3/igt@[email protected]
* igt@gem_lmem_swapping@verify-random-ccs:
- shard-glk: NOTRUN -> [SKIP][5] ([fdo#109271] / [i915#4613]) +1 similar issue
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk7/igt@[email protected]
* igt@gem_userptr_blits@vma-merge:
- shard-glk: NOTRUN -> [FAIL][6] ([i915#3318])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk7/igt@[email protected]
* igt@gen9_exec_parse@allowed-single:
- shard-glk: [PASS][7] -> [ABORT][8] ([i915#5566])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-glk5/igt@[email protected]
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk9/igt@[email protected]
* igt@kms_ccs@pipe-b-crc-primary-rotation-180-y_tiled_gen12_rc_ccs_cc:
- shard-apl: NOTRUN -> [SKIP][9] ([fdo#109271] / [i915#3886])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-apl3/igt@kms_ccs@pipe-b-crc-primary-rotation-180-y_tiled_gen12_rc_ccs_cc.html
* igt@kms_ccs@pipe-c-crc-primary-basic-y_tiled_gen12_mc_ccs:
- shard-glk: NOTRUN -> [SKIP][10] ([fdo#109271] / [i915#3886]) +1 similar issue
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk7/igt@kms_ccs@pipe-c-crc-primary-basic-y_tiled_gen12_mc_ccs.html
* igt@kms_cursor_crc@cursor-rapid-movement-32x10:
- shard-glk: NOTRUN -> [SKIP][11] ([fdo#109271] / [i915#4579]) +1 similar issue
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk7/igt@[email protected]
* igt@kms_flip_scaled_crc@flip-32bpp-yftile-to-64bpp-yftile-downscaling@pipe-a-valid-mode:
- shard-apl: NOTRUN -> [SKIP][12] ([fdo#109271] / [i915#4579])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-apl3/igt@kms_flip_scaled_crc@flip-32bpp-yftile-to-64bpp-yftile-downscaling@pipe-a-valid-mode.html
* igt@kms_force_connector_basic@force-connector-state:
- shard-apl: NOTRUN -> [SKIP][13] ([fdo#109271]) +26 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-apl3/igt@[email protected]
* igt@kms_plane_alpha_blend@alpha-opaque-fb@pipe-a-hdmi-a-1:
- shard-glk: NOTRUN -> [FAIL][14] ([i915#4573]) +1 similar issue
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk7/igt@kms_plane_alpha_blend@[email protected]
* igt@kms_plane_scaling@plane-upscale-with-modifiers-factor-0-25@pipe-b-hdmi-a-1:
- shard-snb: NOTRUN -> [SKIP][15] ([fdo#109271] / [i915#4579]) +5 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-snb1/igt@kms_plane_scaling@[email protected]
* igt@kms_plane_scaling@planes-downscale-factor-0-75-unity-scaling@pipe-a-vga-1:
- shard-snb: NOTRUN -> [SKIP][16] ([fdo#109271]) +12 similar issues
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-snb5/igt@kms_plane_scaling@[email protected]
* igt@kms_psr2_sf@plane-move-sf-dmg-area:
- shard-apl: NOTRUN -> [SKIP][17] ([fdo#109271] / [i915#658]) +1 similar issue
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-apl3/igt@[email protected]
* igt@kms_psr2_su@page_flip-xrgb8888:
- shard-glk: NOTRUN -> [SKIP][18] ([fdo#109271] / [i915#658])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk7/igt@kms_psr2_su@page_flip-xrgb8888.html
#### Possible fixes ####
* igt@drm_fdinfo@most-busy-check-all@rcs0:
- {shard-rkl}: [FAIL][19] ([i915#7742]) -> [PASS][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-rkl-4/igt@drm_fdinfo@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-rkl-7/igt@drm_fdinfo@[email protected]
* igt@gem_barrier_race@remote-request@rcs0:
- {shard-tglu}: [ABORT][21] ([i915#8211] / [i915#8234]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-tglu-4/igt@gem_barrier_race@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-tglu-8/igt@gem_barrier_race@[email protected]
* igt@gem_exec_fair@basic-pace-share@rcs0:
- {shard-rkl}: [FAIL][23] ([i915#2842]) -> [PASS][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-rkl-7/igt@gem_exec_fair@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-rkl-6/igt@gem_exec_fair@[email protected]
* igt@gem_exec_reloc@basic-write-wc:
- shard-glk: [TIMEOUT][25] -> [PASS][26] +2 similar issues
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-glk3/igt@[email protected]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk7/igt@[email protected]
* igt@gem_exec_suspend@basic-s3@smem:
- shard-apl: [ABORT][27] ([i915#180] / [i915#8213]) -> [PASS][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-apl2/igt@gem_exec_suspend@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-apl3/igt@gem_exec_suspend@[email protected]
* igt@i915_pm_rpm@dpms-lpsp:
- {shard-dg1}: [SKIP][29] ([i915#1397]) -> [PASS][30]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-dg1-18/igt@[email protected]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-dg1-19/igt@[email protected]
* igt@i915_suspend@basic-s3-without-i915:
- {shard-rkl}: [FAIL][31] ([fdo#103375]) -> [PASS][32]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-rkl-6/igt@[email protected]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-rkl-3/igt@[email protected]
* igt@kms_cursor_legacy@flip-vs-cursor-atomic-transitions:
- shard-glk: [FAIL][33] ([i915#2346]) -> [PASS][34] +1 similar issue
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-glk3/igt@[email protected]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk8/igt@[email protected]
* igt@kms_cursor_legacy@forked-move@pipe-b:
- {shard-rkl}: [INCOMPLETE][35] ([i915#8011]) -> [PASS][36] +1 similar issue
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-rkl-7/igt@kms_cursor_legacy@[email protected]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-rkl-6/igt@kms_cursor_legacy@[email protected]
- {shard-dg1}: [INCOMPLETE][37] ([i915#8011] / [i915#8347]) -> [PASS][38] +1 similar issue
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-dg1-19/igt@kms_cursor_legacy@[email protected]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-dg1-18/igt@kms_cursor_legacy@[email protected]
* igt@kms_frontbuffer_tracking@fbc-2p-shrfb-fliptrack-mmap-gtt:
- shard-snb: [SKIP][39] ([fdo#109271]) -> [PASS][40]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-snb7/igt@[email protected]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-snb1/igt@[email protected]
* igt@perf@enable-disable@0-rcs0:
- shard-glk: [TIMEOUT][41] ([i915#8170]) -> [PASS][42]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_13249/shard-glk3/igt@perf@[email protected]
[42]: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/shard-glk7/igt@perf@[email protected]
{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).
[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109274]: https://bugs.freedesktop.org/show_bug.cgi?id=109274
[fdo#109280]: https://bugs.freedesktop.org/show_bug.cgi?id=109280
[fdo#109289]: https://bugs.freedesktop.org/show_bug.cgi?id=109289
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#109315]: https://bugs.freedesktop.org/show_bug.cgi?id=109315
[fdo#109506]: https://bugs.freedesktop.org/show_bug.cgi?id=109506
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#111615]: https://bugs.freedesktop.org/show_bug.cgi?id=111615
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#1397]: https://gitlab.freedesktop.org/drm/intel/issues/1397
[i915#180]: https://gitlab.freedesktop.org/drm/intel/issues/180
[i915#2346]: https://gitlab.freedesktop.org/drm/intel/issues/2346
[i915#2575]: https://gitlab.freedesktop.org/drm/intel/issues/2575
[i915#2587]: https://gitlab.freedesktop.org/drm/intel/issues/2587
[i915#2672]: https://gitlab.freedesktop.org/drm/intel/issues/2672
[i915#2842]: https://gitlab.freedesktop.org/drm/intel/issues/2842
[i915#3318]: https://gitlab.freedesktop.org/drm/intel/issues/3318
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3591]: https://gitlab.freedesktop.org/drm/intel/issues/3591
[i915#3637]: https://gitlab.freedesktop.org/drm/intel/issues/3637
[i915#3689]: https://gitlab.freedesktop.org/drm/intel/issues/3689
[i915#3742]: https://gitlab.freedesktop.org/drm/intel/issues/3742
[i915#3886]: https://gitlab.freedesktop.org/drm/intel/issues/3886
[i915#3955]: https://gitlab.freedesktop.org/drm/intel/issues/3955
[i915#4070]: https://gitlab.freedesktop.org/drm/intel/issues/4070
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4270]: https://gitlab.freedesktop.org/drm/intel/issues/4270
[i915#4281]: https://gitlab.freedesktop.org/drm/intel/issues/4281
[i915#4391]: https://gitlab.freedesktop.org/drm/intel/issues/4391
[i915#4423]: https://gitlab.freedesktop.org/drm/intel/issues/4423
[i915#4573]: https://gitlab.freedesktop.org/drm/intel/issues/4573
[i915#4579]: https://gitlab.freedesktop.org/drm/intel/issues/4579
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4816]: https://gitlab.freedesktop.org/drm/intel/issues/4816
[i915#4833]: https://gitlab.freedesktop.org/drm/intel/issues/4833
[i915#5176]: https://gitlab.freedesktop.org/drm/intel/issues/5176
[i915#5234]: https://gitlab.freedesktop.org/drm/intel/issues/5234
[i915#5235]: https://gitlab.freedesktop.org/drm/intel/issues/5235
[i915#5354]: https://gitlab.freedesktop.org/drm/intel/issues/5354
[i915#5493]: https://gitlab.freedesktop.org/drm/intel/issues/5493
[i915#5566]: https://gitlab.freedesktop.org/drm/intel/issues/5566
[i915#5784]: https://gitlab.freedesktop.org/drm/intel/issues/5784
[i915#6095]: https://gitlab.freedesktop.org/drm/intel/issues/6095
[i915#6268]: https://gitlab.freedesktop.org/drm/intel/issues/6268
[i915#6433]: https://gitlab.freedesktop.org/drm/intel/issues/6433
[i915#658]: https://gitlab.freedesktop.org/drm/intel/issues/658
[i915#6590]: https://gitlab.freedesktop.org/drm/intel/issues/6590
[i915#6944]: https://gitlab.freedesktop.org/drm/intel/issues/6944
[i915#6953]: https://gitlab.freedesktop.org/drm/intel/issues/6953
[i915#7116]: https://gitlab.freedesktop.org/drm/intel/issues/7116
[i915#7118]: https://gitlab.freedesktop.org/drm/intel/issues/7118
[i915#7461]: https://gitlab.freedesktop.org/drm/intel/issues/7461
[i915#7707]: https://gitlab.freedesktop.org/drm/intel/issues/7707
[i915#7742]: https://gitlab.freedesktop.org/drm/intel/issues/7742
[i915#7828]: https://gitlab.freedesktop.org/drm/intel/issues/7828
[i915#7975]: https://gitlab.freedesktop.org/drm/intel/issues/7975
[i915#8011]: https://gitlab.freedesktop.org/drm/intel/issues/8011
[i915#8170]: https://gitlab.freedesktop.org/drm/intel/issues/8170
[i915#8190]: https://gitlab.freedesktop.org/drm/intel/issues/8190
[i915#8211]: https://gitlab.freedesktop.org/drm/intel/issues/8211
[i915#8213]: https://gitlab.freedesktop.org/drm/intel/issues/8213
[i915#8228]: https://gitlab.freedesktop.org/drm/intel/issues/8228
[i915#8234]: https://gitlab.freedesktop.org/drm/intel/issues/8234
[i915#8311]: https://gitlab.freedesktop.org/drm/intel/issues/8311
[i915#8347]: https://gitlab.freedesktop.org/drm/intel/issues/8347
[i915#8398]: https://gitlab.freedesktop.org/drm/intel/issues/8398
[i915#8502]: https://gitlab.freedesktop.org/drm/intel/issues/8502
Build changes
-------------
* Linux: CI_DRM_13249 -> Patchwork_119055v2
CI-20190529: 20190529
CI_DRM_13249: e5065ee5a0b23e3f970315def269ac363bcb212f @ git://anongit.freedesktop.org/gfx-ci/linux
IGT_7322: 2dd77d6d827a308caae49ce3eba759c2bab394ed @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git
Patchwork_119055v2: e5065ee5a0b23e3f970315def269ac363bcb212f @ git://anongit.freedesktop.org/gfx-ci/linux
piglit_4509: fdc5a4ca11124ab8413c7988896eec4c97336694 @ git://anongit.freedesktop.org/piglit
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_119055v2/index.html
Quoted 52 lines · Arun R Murthy
At the begining of the aux transfer a check for aux control busy bit is done. Then as per the spec on aux transfer timeout, need to retry freshly for 3 times with a delay which is taken care by the control register.
On each of these 3 trials a check for busy has to be done so as to start freshly.v2: updated the commit message
Signed-off-by Arun R Murthy <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp_aux.c | 50 +++++++++------------ 1 file changed, 22 insertions(+), 28 deletions(-)drivers/gpu/drm/i915/display/intel_dp_aux.c +0
-24@@ -273,30 +273,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,* it using the same AUX CH simultaneously */ -/* Try to wait for any previous AUX channel activity */ -for (try =0 ; try <3 ; try++) { - status =intel_de_read_notrace (i915, ch_ctl); -if ((status &DP_AUX_CH_CTL_SEND_BUSY ) ==0 ) -break ; -msleep (1 ); - } -/* just trace the final value */ -trace_i915_reg_rw (false, ch_ctl, status,sizeof (status), true); - -if (try ==3 ) { -const u32 status =intel_de_read (i915, ch_ctl); - -if (status != intel_dp->aux_busy_last_status) { -drm_WARN (&i915->drm,1 , -"%s: not started (status 0x%08x)\n" , - intel_dp->aux.name, status); - intel_dp->aux_busy_last_status = status; - } - - ret = -EBUSY ; - goto out; - } -/* Only 5 data registers! */ if (drm_WARN_ON (&i915->drm, send_bytes >20 || recv_size >20 )) { ret = -E2BIG ;@@ -304,14 +280,31 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp, }
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 289
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +4
-2while ((aux_clock_divider = intel_dp->get_aux_clock_divider (intel_dp, clock++))) { -u32 send_ctl = intel_dp->get_aux_send_ctl (intel_dp, +/* Must try at least 3 times according to DP spec */ +for (try =0 ; try <5 ; try++) { +u32 send_ctl = intel_dp->get_aux_send_ctl (intel_dp, send_bytes, aux_clock_divider); - send_ctl |= aux_send_ctl_flags; + send_ctl |= aux_send_ctl_flags;
Why is send_ctl recomputed in each iteration?
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 292
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +3
-0+ +/* Try to wait for any previous AUX channel activity */ + status =intel_dp_aux_wait_done (intel_dp);
How does it help to wait here for the same condition that was already waited for at the end of the loop?
Quoted 31 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +15
-2+/* just trace the final value */ +trace_i915_reg_rw (false, ch_ctl, status,sizeof (status), true); + +if (status &DP_AUX_CH_CTL_SEND_BUSY ) { +drm_WARN (&i915->drm,1 , +"%s: not started, previous Tx still in process (status 0x%08x)\n" , + intel_dp->aux.name, status); + intel_dp->aux_busy_last_status = status; +if (try >3 ) { + ret = -EBUSY ; + goto out; + }else +continue ; + } -/* Must try at least 3 times according to DP spec */ -for (try =0 ; try <5 ; try++) {/* Load the send data into the aux channel data registers */ for (i =0 ; i < send_bytes; i +=4 ) intel_de_write(i915, ch_data[i >> 2],@@ -321,6 +314,7 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,/* Send the command and wait for it to complete */ intel_de_write (i915, ch_ctl, send_ctl); +/* TODO: if typeC then 4.2ms else 800us. For DG2 add 1.5ms for both cases */ status =intel_dp_aux_wait_done (intel_dp);/* Clear done status and any errors */ Signature · 1 line
2.25.1
Quoted 72 lines
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Monday, June 12, 2023 5:07 PM
To: Murthy, Arun R <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCHv2] drm/i915/display/dp: On AUX xfer timeout restart freshlyQuoted 63 lines · Arun R Murthy
At the begining of the aux transfer a check for aux control busy bit is done. Then as per the spec on aux transfer timeout, need to retry freshly for 3 times with a delay which is taken care by the control register.
On each of these 3 trials a check for busy has to be done so as to start freshly.v2: updated the commit message
Signed-off-by Arun R Murthy <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp_aux.c | 50 +++++++++------------ 1 file changed, 22 insertions(+), 28 deletions(-)drivers/gpu/drm/i915/display/intel_dp_aux.c +3
-25@@ -273,30 +273,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,* it using the same AUX CH simultaneously */ -/* Try to wait for any previous AUX channel activity */ -for (try =0 ; try <3 ; try++) { - status =intel_de_read_notrace (i915, ch_ctl); -if ((status &DP_AUX_CH_CTL_SEND_BUSY ) ==0 ) -break ; -msleep (1 ); - } -/* just trace the final value */ -trace_i915_reg_rw (false, ch_ctl, status,sizeof (status), true); - -if (try ==3 ) { -const u32 status =intel_de_read (i915, ch_ctl); - -if (status != intel_dp->aux_busy_last_status) { -drm_WARN (&i915->drm,1 , -"%s: not started (status 0x%08x)\n" , - intel_dp->aux.name, status); - intel_dp->aux_busy_last_status = status; - } - - ret = -EBUSY ; - goto out; - } -/* Only 5 data registers! */ if (drm_WARN_ON (&i915->drm, send_bytes >20 || recv_size >20 )) { ret = -E2BIG ;@@ -304,14 +280,31 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp, }while ((aux_clock_divider = intel_dp-get_aux_clock_divider (intel_dp, clock++))) { -u32 send_ctl = intel_dp->get_aux_send_ctl (intel_dp, +/* Must try at least 3 times according to DP spec */ +for (try =0 ; try <5 ; try++) { +u32 send_ctl = intel_dp->get_aux_send_ctl (intel_dp, send_bytes, aux_clock_divider);
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 289
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +1
-1- send_ctl |= aux_send_ctl_flags; + send_ctl |= aux_send_ctl_flags;Why is
send_ctlrecomputed in each iteration?
This can be moved outside the loop, since the value doesn't tend to change.
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 292
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +2
-0+ +/* Try to wait for any previous AUX channel activity */
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 292
Quoted 1 line
drivers/gpu/drm/i915/display/intel_dp_aux.c +1
-0+ status =intel_dp_aux_wait_done (intel_dp);How does it help to wait here for the same condition that was already waited for at the end of the loop?
Here we are checking for busy bit so as to ensure that the previous transfer is complete and only then the new transfer is initiated.
In the latter case, we sent the data and then wait to get the acknowledgement(busy/error/timeout).
Check for busy is to be done before sending the data. Here it was done before this loop.
The spec limits the trials for sending data to 3 in case of failure and in each of this iteration it has to be started freshly. So we need to ensure that the previous transfer is completed before sending the new data.
Thanks and Regards,
Arun R Murthy
--------------------
Quoted 38 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 295
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +2
-0+/* just trace the final value */ + trace_i915_reg_rw(false, ch_ctl, status, sizeof(status),true);
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp,
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +4
-0+ +if (status &DP_AUX_CH_CTL_SEND_BUSY ) { + drm_WARN(&i915->drm, 1, + "%s: not started, previous Tx still inprocess (status 0x%08x)\n",
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp,
Quoted 12 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +8
-2+ intel_dp->aux.name, status); + intel_dp->aux_busy_last_status = status; +if (try >3 ) { + ret = -EBUSY ; + goto out; + }else +continue ; + } -/* Must try at least 3 times according to DP spec */ -for (try =0 ; try <5 ; try++) {/* Load the send data into the aux channel data registers */
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +0
-0for (i =0 ; i < send_bytes; i +=4 )intel_de_write(i915, ch_data[i >> 2], @@ -
321,6 +314,7 @@
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp,
Quoted 5 lines
intel_dp_aux_xfer(struct
intel_dp*intel_dp,drivers/gpu/drm/i915/display/intel_dp_aux.c +1
-0/* Send the command and wait for it to complete */ intel_de_write (i915, ch_ctl, send_ctl); +/* TODO: if typeC then 4.2ms else 800us. For DG2 add 1.5ms for
Quoted 7 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +1
-1+both cases */ status =intel_dp_aux_wait_done (intel_dp);/* Clear done status and any errors */ --2.25.1
Quoted 91 lines · Arun R
Quoted 72 lines
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Monday, June 12, 2023 5:07 PM
To: Murthy, Arun R <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCHv2] drm/i915/display/dp: On AUX xfer timeout restart freshlyQuoted 63 lines · Arun R Murthy
At the begining of the aux transfer a check for aux control busy bit is done. Then as per the spec on aux transfer timeout, need to retry freshly for 3 times with a delay which is taken care by the control register.
On each of these 3 trials a check for busy has to be done so as to start freshly.v2: updated the commit message
Signed-off-by Arun R Murthy <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp_aux.c | 50 +++++++++------------ 1 file changed, 22 insertions(+), 28 deletions(-)drivers/gpu/drm/i915/display/intel_dp_aux.c +3
-25@@ -273,30 +273,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,* it using the same AUX CH simultaneously */ -/* Try to wait for any previous AUX channel activity */ -for (try =0 ; try <3 ; try++) { - status =intel_de_read_notrace (i915, ch_ctl); -if ((status &DP_AUX_CH_CTL_SEND_BUSY ) ==0 ) -break ; -msleep (1 ); - } -/* just trace the final value */ -trace_i915_reg_rw (false, ch_ctl, status,sizeof (status), true); - -if (try ==3 ) { -const u32 status =intel_de_read (i915, ch_ctl); - -if (status != intel_dp->aux_busy_last_status) { -drm_WARN (&i915->drm,1 , -"%s: not started (status 0x%08x)\n" , - intel_dp->aux.name, status); - intel_dp->aux_busy_last_status = status; - } - - ret = -EBUSY ; - goto out; - } -/* Only 5 data registers! */ if (drm_WARN_ON (&i915->drm, send_bytes >20 || recv_size >20 )) { ret = -E2BIG ;@@ -304,14 +280,31 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp, }while ((aux_clock_divider = intel_dp-get_aux_clock_divider (intel_dp, clock++))) { -u32 send_ctl = intel_dp->get_aux_send_ctl (intel_dp, +/* Must try at least 3 times according to DP spec */ +for (try =0 ; try <5 ; try++) { +u32 send_ctl = intel_dp->get_aux_send_ctl (intel_dp, send_bytes, aux_clock_divider);Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 289
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +1
-1- send_ctl |= aux_send_ctl_flags; + send_ctl |= aux_send_ctl_flags;Why is
send_ctlrecomputed in each iteration?This can be moved outside the loop, since the value doesn't tend to change.
Quoted 8 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 292
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +2
-0+ +/* Try to wait for any previous AUX channel activity */
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 292
Quoted 1 line
drivers/gpu/drm/i915/display/intel_dp_aux.c +1
-0+ status =intel_dp_aux_wait_done (intel_dp);How does it help to wait here for the same condition that was already waited for at the end of the loop?
Here we are checking for busy bit so as to ensure that the previous transfer is complete and only then the new transfer is initiated.
Quoted 8 lines
In the latter case, we sent the data and then wait to get the acknowledgement(busy/error/timeout).
Check for busy is to be done before sending the data. Here it was done before this loop. The spec limits the trials for sending data to 3 in case of failure and in each of this iteration it has to be started freshly. So we need to ensure that the previous transfer is completed before sending the new data.
Not sure what you mean by "freshly". One potential problem in the current code I can see is that if BUSY is still set after intel_dp_aux_wait_done() returns none of the control register fields should be changed, so I think at that point the transfer should be aborted.
Also since a while back intel_dp_aux_wait_done() was changed to poll for the transfer completion instead of waiting for an interrupt, the corresponding interrupt should not be enabled either in the control register.
Quoted 41 lines
Thanks and Regards,
Arun R Murthy
--------------------Quoted 38 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 295
Quoted 3 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +2
-0+/* just trace the final value */ + trace_i915_reg_rw(false, ch_ctl, status, sizeof(status),true);
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp,
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +4
-0+ +if (status &DP_AUX_CH_CTL_SEND_BUSY ) { + drm_WARN(&i915->drm, 1, + "%s: not started, previous Tx still inprocess (status 0x%08x)\n",
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp,
Quoted 12 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +8
-2+ intel_dp->aux.name, status); + intel_dp->aux_busy_last_status = status; +if (try >3 ) { + ret = -EBUSY ; + goto out; + }else +continue ; + } -/* Must try at least 3 times according to DP spec */ -for (try =0 ; try <5 ; try++) {/* Load the send data into the aux channel data registers */
Quoted 2 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +0
-0for (i =0 ; i < send_bytes; i +=4 )intel_de_write(i915, ch_data[i >> 2], @@ -321,6 +314,7 @@
Quoted 5 lines
intel_dp_aux_xfer(struct
intel_dp*intel_dp,/* Send the command and wait for it to complete */ intel_de_write(i915, ch_ctl, send_ctl);+ /* TODO: if typeC then 4.2ms else 800us. For DG2
add 1.5ms for
Quoted 7 lines
+both cases */
status = intel_dp_aux_wait_done(intel_dp); /* Clear done status and any errors */--
2.25.1
Quoted 113 lines
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Monday, June 12, 2023 6:28 PM
To: Murthy, Arun R <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCHv2] drm/i915/display/dp: On AUX xfer timeout restart freshlyQuoted 72 lines · Arun R
Quoted 72 lines
-----Original Message-----
From: Deak, Imre <[email protected]>
Sent: Monday, June 12, 2023 5:07 PM
To: Murthy, Arun R <[email protected]>
Cc: [email protected]
Subject: Re: [Intel-gfx] [PATCHv2] drm/i915/display/dp: On AUX xfer timeout restart freshlyQuoted 63 lines · Arun R Murthy
At the begining of the aux transfer a check for aux control busy bit is done. Then as per the spec on aux transfer timeout, need to retry freshly for 3 times with a delay which is taken care by the control register.
On each of these 3 trials a check for busy has to be done so as to start freshly.v2: updated the commit message
Signed-off-by Arun R Murthy <[email protected]>--- drivers/gpu/drm/i915/display/intel_dp_aux.c | 50 +++++++++------------ 1 file changed, 22 insertions(+), 28 deletions(-)drivers/gpu/drm/i915/display/intel_dp_aux.c +4
-25@@ -273,30 +273,6 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp,* it using the same AUX CH simultaneously */ -/* Try to wait for any previous AUX channel activity */ -for (try =0 ; try <3 ; try++) { - status =intel_de_read_notrace (i915, ch_ctl); -if ((status &DP_AUX_CH_CTL_SEND_BUSY ) ==0 ) -break ; -msleep (1 ); - } -/* just trace the final value */ -trace_i915_reg_rw (false, ch_ctl, status,sizeof (status), true); - -if (try ==3 ) { -const u32 status =intel_de_read (i915, ch_ctl); - -if (status != intel_dp->aux_busy_last_status) { -drm_WARN (&i915->drm,1 , -"%s: not started (status 0x%08x)\n" , - intel_dp->aux.name, status); - intel_dp->aux_busy_last_status = status; - } - - ret = -EBUSY ; - goto out; - } -/* Only 5 data registers! */ if (drm_WARN_ON (&i915->drm, send_bytes >20 || recv_size >20 )) { ret = -E2BIG ;@@ -304,14 +280,31 @@ intel_dp_aux_xfer(struct intel_dp *intel_dp, }while ((aux_clock_divider = intel_dp-get_aux_clock_divider (intel_dp, clock++))) { - u32 send_ctl = intel_dp->get_aux_send_ctl(intel_dp, +/* Must try at least 3 times according to DP spec */ +for (try =0 ; try <5 ; try++) { +u32 send_ctl = + intel_dp->get_aux_send_ctl(intel_dp, send_bytes,Quoted 8 lines
Quoted 6 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 289
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +1
-1aux_clock_divider); - send_ctl |= aux_send_ctl_flags; + send_ctl |= aux_send_ctl_flags;Why is
send_ctlrecomputed in each iteration?This can be moved outside the loop, since the value doesn't tend to
change.
Quoted 14 lines
Quoted 10 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 295
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +3
-0+ +/* Try to wait for any previous AUX channel +activity */
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 292
Quoted 1 line
drivers/gpu/drm/i915/display/intel_dp_aux.c +1
-0+ status =intel_dp_aux_wait_done (intel_dp);How does it help to wait here for the same condition that was already waited for at the end of the loop?
Here we are checking for busy bit so as to ensure that the previous transfer is complete and only then the new transfer is initiated.
Quoted 8 lines
In the latter case, we sent the data and then wait to get the acknowledgement(busy/error/timeout).
Check for busy is to be done before sending the data. Here it was done before this loop. The spec limits the trials for sending data to 3 in case of failure and in each of this iteration it has to be started freshly. So we need to ensure that the previous transfer is completed before sending the new data.
Quoted 4 lines
Not sure what you mean by "freshly". One potential problem in the current code I can see is that if BUSY is still set after
intel_dp_aux_wait_done()returns none of the control register fields should be changed, so I think at that point the transfer should be aborted.
Good Catch! I missed that. Will surely take care of this in the next version.
Quoted 4 lines
Also since a while back
intel_dp_aux_wait_done()was changed to poll for the transfer completion instead of waiting for an interrupt, the corresponding interrupt should not be enabled either in the control register.
Yes this is in my TODO list, most likely in my next patch.
Thanks and Regards,
Arun R Murthy
--------------------
Quoted 47 lines
Quoted 47 lines
Thanks and Regards,
Arun R Murthy
--------------------Quoted 43 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp, · line 299
Quoted 4 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +3
-0+/* just trace the final value */ + trace_i915_reg_rw(false, ch_ctl, status, + sizeof(status),true);
drivers/gpu/drm/i915/display/intel_dp_aux.c intel_dp_aux_xfer(struct intel_dp *intel_dp,
Quoted 5 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +5
-0+ +if (status &DP_AUX_CH_CTL_SEND_BUSY ) { +drm_WARN (&i915->drm,1 , + "%s: not started, previous Tx + still inprocess (status 0x%08x)\n",
Quoted 12 lines
drivers/gpu/drm/i915/display/intel_dp_aux.c +8
-2+ intel_dp->aux.name, status); + intel_dp->aux_busy_last_status = status; +if (try >3 ) { + ret = -EBUSY ; + goto out; + }else +continue ; + } -/* Must try at least 3 times according to DP spec */ -for (try =0 ; try <5 ; try++) {/* Load the send data into the aux channel Quoted 1 line
data
registers */
Quoted 3 lines
for (i = 0; i < send_bytes; i += 4) intel_de_write(i915, ch_data[i >> 2],@@ -
321,6 +314,7 @@
Quoted 6 lines
intel_dp_aux_xfer(struct
intel_dp*intel_dp,/* Send the command and wait for it to complete */ intel_de_write(i915, ch_ctl, send_ctl);+ /* TODO: if typeC then 4.2ms else 800us. For
+ DG2add 1.5ms for
Quoted 7 lines
+both cases */
status = intel_dp_aux_wait_done(intel_dp); /* Clear done status and any errors */--
2.25.1