net: stmmac: xgmac: RX queue routing configuration
Subsystems (4)
PATCH v2 1/1 net: stmmac: xgmac: RX queue routing configuration
Commit abe80fdc6ee6 ("net: stmmac: RX queue routing configuration") introduced RX queue routing to DWMAC4 core.
This patch extend the support to XGMAC2 core.
Signed-off-by Furong Xu <[email protected]>
---
Changes in v2:
- Convert the shift ops to FIELD_PREP
--- .../net/ethernet/stmicro/stmmac/dwxgmac2.h | 14 ++++++++ .../ethernet/stmicro/stmmac/dwxgmac2_core.c | 34 +++++++++++++++++-- 2 files changed, 46 insertions(+), 2 deletions(-)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h +14 -0
@@ -74,8 +74,22 @@#define XGMAC_RXQEN (x) GENMASK((x) * 2 + 1, (x) * 2)#define XGMAC_RXQEN_SHIFT (x) ((x) * 2)#define XGMAC_RXQ_CTRL1 0x000000a4 +#define XGMAC_AVCPQ GENMASK(31, 28) +#define XGMAC_AVCPQ_SHIFT 28 +#define XGMAC_PTPQ GENMASK(27, 24) +#define XGMAC_PTPQ_SHIFT 24 +#define XGMAC_TACPQE BIT(23) +#define XGMAC_TACPQE_SHIFT 23 +#define XGMAC_DCBCPQ GENMASK(19, 16) +#define XGMAC_DCBCPQ_SHIFT 16 +#define XGMAC_MCBCQEN BIT(15) +#define XGMAC_MCBCQEN_SHIFT 15 +#define XGMAC_MCBCQ GENMASK(11, 8) +#define XGMAC_MCBCQ_SHIFT 8#define XGMAC_RQ GENMASK(7, 4)#define XGMAC_RQ_SHIFT 4 +#define XGMAC_UPQ GENMASK(3, 0) +#define XGMAC_UPQ_SHIFT 0#define XGMAC_RXQ_CTRL2 0x000000a8#define XGMAC_RXQ_CTRL3 0x000000ac#define XGMAC_PSRQ (x) GENMASK((x) * 8 + 7, (x) * 8)
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c +32 -2
@@ -127,6 +127,36 @@ static void dwxgmac2_tx_queue_prio(struct mac_device_info *hw, u32 prio,writel (value, ioaddr + reg); } +static void dwxgmac2_rx_queue_routing (struct mac_device_info *hw, +u8 packet,u32 queue) +{ +void __iomem *ioaddr = hw->pcsr; +u32 value; + +static const struct stmmac_rx_routing dwxgmac2_route_possibilities[] = { + {XGMAC_AVCPQ ,XGMAC_AVCPQ_SHIFT }, + {XGMAC_PTPQ ,XGMAC_PTPQ_SHIFT }, + {XGMAC_DCBCPQ ,XGMAC_DCBCPQ_SHIFT }, + {XGMAC_UPQ ,XGMAC_UPQ_SHIFT }, + {XGMAC_MCBCQ ,XGMAC_MCBCQ_SHIFT }, + }; + + value =readl (ioaddr +XGMAC_RXQ_CTRL1 ); + +/* routing configuration */ + value &= ~dwxgmac2_route_possibilities[packet -1 ].reg_mask; + value |= (queue << dwxgmac2_route_possibilities[packet -1 ].reg_shift) & + dwxgmac2_route_possibilities[packet -1 ].reg_mask; + +/* some packets require extra ops */ +if (packet ==PACKET_AVCPQ ) + value |=FIELD_PREP (XGMAC_TACPQE ,1 ); +else if (packet ==PACKET_MCBCQ ) + value |=FIELD_PREP (XGMAC_MCBCQEN ,1 ); + +writel (value, ioaddr +XGMAC_RXQ_CTRL1 ); +} +static void dwxgmac2_prog_mtl_rx_algorithms (struct mac_device_info *hw,u32 rx_alg) {
@@ -1463,7 +1493,7 @@ const struct stmmac_ops dwxgmac210_ops = { .rx_queue_enable = dwxgmac2_rx_queue_enable, .rx_queue_prio = dwxgmac2_rx_queue_prio, .tx_queue_prio = dwxgmac2_tx_queue_prio, - .rx_queue_routing = NULL, + .rx_queue_routing = dwxgmac2_rx_queue_routing, .prog_mtl_rx_algorithms = dwxgmac2_prog_mtl_rx_algorithms, .prog_mtl_tx_algorithms = dwxgmac2_prog_mtl_tx_algorithms, .set_mtl_tx_queue_weight = dwxgmac2_set_mtl_tx_queue_weight,
@@ -1524,7 +1554,7 @@ const struct stmmac_ops dwxlgmac2_ops = { .rx_queue_enable = dwxlgmac2_rx_queue_enable, .rx_queue_prio = dwxgmac2_rx_queue_prio, .tx_queue_prio = dwxgmac2_tx_queue_prio, - .rx_queue_routing = NULL, + .rx_queue_routing = dwxgmac2_rx_queue_routing, .prog_mtl_rx_algorithms = dwxgmac2_prog_mtl_rx_algorithms, .prog_mtl_tx_algorithms = dwxgmac2_prog_mtl_tx_algorithms, .set_mtl_tx_queue_weight = dwxgmac2_set_mtl_tx_queue_weight,
Signature · 1 line
2.34.1
Quoted 8 lines · Furong Xu
Commit
abe80fdc6ee6("net: stmmac: RX queue routing configuration") introduced RX queue routing to DWMAC4 core.
This patch extend the support to XGMAC2 core.Signed-off-by Furong Xu <[email protected]>---
Changes in v2:
- Convert the shift ops toFIELD_PREP
Thanks!
FWIIW, I think if the code moved to using FIELD_PREP then probably the _SHIFT defined can be cropped.
Reviewed-by Simon Horman <[email protected]>