i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
PATCH v3 1/1 i2c: i801: fix potential race in i801_block_transaction_byte_by_byte
Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set.
Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done().
---
v3:
- Apparently potential issue has been there forever, therefore cc to stable w/o Fixes tag.
--- drivers/i2c/busses/i2c-i801.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)
drivers/i2c/busses/i2c-i801.c +9 -10
@@ -679,15 +679,11 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,return result ? priv->status : -ETIMEDOUT ; } -for (i =1 ; i <= len; i++) { -if (i == len && read_write ==I2C_SMBUS_READ ) - smbcmd |=SMBHSTCNT_LAST_BYTE ; -outb_p (smbcmd,SMBHSTCNT (priv)); - -if (i ==1 ) -outb_p (inb (SMBHSTCNT (priv)) |SMBHSTCNT_START , -SMBHSTCNT (priv)); +if (len ==1 && read_write ==I2C_SMBUS_READ ) + smbcmd |=SMBHSTCNT_LAST_BYTE ; +outb_p (smbcmd |SMBHSTCNT_START ,SMBHSTCNT (priv)); +for (i =1 ; i <= len; i++) { status =i801_wait_byte_done (priv);if (status)return status;
@@ -710,9 +706,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, data->block[0 ] = len; } -/* Retrieve/store value in SMBBLKDAT */ -if (read_write ==I2C_SMBUS_READ ) +if (read_write ==I2C_SMBUS_READ ) { data->block[i] =inb_p (SMBBLKDAT (priv)); +if (i == len -1 ) +outb_p (smbcmd |SMBHSTCNT_LAST_BYTE ,SMBHSTCNT (priv)); + } +if (read_write ==I2C_SMBUS_WRITE && i+1 <= len)outb_p (data->block[i+1 ],SMBBLKDAT (priv));
Signature · 1 line
2.42.0
Quoted 8 lines · Heiner Kallweit
Currently we set
SMBHSTCNT_LAST_BYTEonly after the host has started receiving the last byte. If we get e.g. preempted before settingSMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte beforeSMBHSTCNT_LAST_BYTEis set.
Therefore change the code to setSMBHSTCNT_LAST_BYTEbefore writingSMBHSTSTS_BYTE_DONEfor the byte before the last byte. Now the code is also consistent with what we do ini801_isr_byte_done().
Quoted 5 lines
Reported-by Jean Delvare <[email protected]>Acked-by Andi Shyti <[email protected]>Signed-off-by Heiner Kallweit <[email protected]>
Signature · 2 lines
Jean Delvare SUSE L3 Support
Wolfram Sang
AppliedQuoted 8 lines · Heiner Kallweit
Currently we set
SMBHSTCNT_LAST_BYTEonly after the host has started receiving the last byte. If we get e.g. preempted before settingSMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte beforeSMBHSTCNT_LAST_BYTEis set.
Therefore change the code to setSMBHSTCNT_LAST_BYTEbefore writingSMBHSTSTS_BYTE_DONEfor the byte before the last byte. Now the code is also consistent with what we do ini801_isr_byte_done().
Quoted 5 lines
Reported-by Jean Delvare <[email protected]>Acked-by Andi Shyti <[email protected]>Signed-off-by Heiner Kallweit <[email protected]>
Applied to for-next, thanks!