Skip to contentSkip to conversation

i2c: i801: fix potential race in i801_block_transaction_byte_by_byte

PATCH Applied Heiner Kallweit 3 participants 3 messages Sep 9, 2023 – Sep 19, 2023

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 i2c: i801: fix potential race in i801_block_transaction_byte_by_byte

Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set.
Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done().

---
v3:
- Apparently potential issue has been there forever, therefore cc to stable w/o Fixes tag.

---
 drivers/i2c/busses/i2c-i801.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)
drivers/i2c/busses/i2c-i801.c +9 -10
index 7a0ccc584..8acf09539 100644
@@ -679,15 +679,11 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 		return result ? priv->status : -ETIMEDOUT;
 	}
 
-	for (i = 1; i <= len; i++) {
-		if (i == len && read_write == I2C_SMBUS_READ)
-			smbcmd |= SMBHSTCNT_LAST_BYTE;
-		outb_p(smbcmd, SMBHSTCNT(priv));
-
-		if (i == 1)
-			outb_p(inb(SMBHSTCNT(priv)) | SMBHSTCNT_START,
-			       SMBHSTCNT(priv));
+	if (len == 1 && read_write == I2C_SMBUS_READ)
+		smbcmd |= SMBHSTCNT_LAST_BYTE;
+	outb_p(smbcmd | SMBHSTCNT_START, SMBHSTCNT(priv));
 
+	for (i = 1; i <= len; i++) {
 		status = i801_wait_byte_done(priv);
 		if (status)
 			return status;
@@ -710,9 +706,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv,
 			data->block[0] = len;
 		}
 
-		/* Retrieve/store value in SMBBLKDAT */
-		if (read_write == I2C_SMBUS_READ)
+		if (read_write == I2C_SMBUS_READ) {
 			data->block[i] = inb_p(SMBBLKDAT(priv));
+			if (i == len - 1)
+				outb_p(smbcmd | SMBHSTCNT_LAST_BYTE, SMBHSTCNT(priv));
+		}
+
 		if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
 			outb_p(data->block[i+1], SMBBLKDAT(priv));
 
Signature · 1 line
2.42.0
Reviewed-by on v3 1/1
#1 lore raw
Quoted 8 lines · Heiner Kallweit

Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set.
Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done().

Quoted 5 lines
Signature · 2 lines
Jean Delvare
SUSE L3 Support
Applied
#2 lore raw
In reply to Heiner Kallweit
Quoted 8 lines · Heiner Kallweit

Currently we set SMBHSTCNT_LAST_BYTE only after the host has started receiving the last byte. If we get e.g. preempted before setting SMBHSTCNT_LAST_BYTE, the host may be finished with receiving the byte before SMBHSTCNT_LAST_BYTE is set.
Therefore change the code to set SMBHSTCNT_LAST_BYTE before writing SMBHSTSTS_BYTE_DONE for the byte before the last byte. Now the code is also consistent with what we do in i801_isr_byte_done().

Quoted 5 lines

Applied to for-next, thanks!