Skip to contentSkip to conversation

eeprog: use force option when eeprog gets data from a pipe

PATCH Applied Thomas Richard 2 participants 2 messages Jun 26, 2024 – Jul 12, 2024 I2C subsystem host drivers

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 eeprog: use force option when eeprog gets data from a pipe

When a pipe is used to send data to eeprog, the force option shall be used. If not, the first character is catched by confirm_action().

---
 eeprog/eeprog.8 | 2 +-
 eeprog/eeprog.c | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)
eeprog/eeprog.8 +1 -1
index 6a61102..70f78ae 100644
@@ -95,6 +95,6 @@ Write the current timestamp at address 0x200 of the EEPROM on bus 0 at address 0
 .P
  	date |
 .B eeprog
-/dev/i2c-0 0x33 -w 0x200
+-f /dev/i2c-0 0x33 -w 0x200
 .SH AUTHOR
 Stefano Barbato
eeprog/eeprog.c +1 -1
index 9978241..ef18ae1 100644
@@ -65,7 +65,7 @@ void do_usage_if(int b, int line)
 "		eeprog /dev/i2c-1 0x51 -x -r 0x22:0x20\n"
 "	3- write the current timestamp at address 0x200 of the EEPROM on\n"
 "	   bus 0 at address 0x33\n"
-"		date | eeprog /dev/i2c-0 0x33 -w 0x200\n";
+"		date | eeprog -f /dev/i2c-0 0x33 -w 0x200\n";
 
 	if(!b)
 		return;
Signature · 1 line
2.39.2
Applied
#1 lore raw
Quoted 4 lines · Thomas Richard

When a pipe is used to send data to eeprog, the force option shall be used. If not, the first character is catched by confirm_action().

Thanks, applied!