eeprog: use force option when eeprog gets data from a pipe
PATCH 1/1 eeprog: use force option when eeprog gets data from a pipe
When a pipe is used to send data to eeprog, the force option shall be used. If not, the first character is catched by confirm_action().
Signed-off-by Thomas Richard <[email protected]>
--- eeprog/eeprog.8 | 2 +- eeprog/eeprog.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
eeprog/eeprog.8 +1 -1
@@ -95,6 +95,6 @@ Write the current timestamp at address 0x200 of the EEPROM on bus 0 at address 0 .P date | .B eeprog -/dev/i2c-0 0x33 -w 0x200 +-f /dev/i2c-0 0x33 -w 0x200 .SH AUTHOR Stefano Barbato
eeprog/eeprog.c +1 -1
@@ -65,7 +65,7 @@ void do_usage_if(int b, int line)" eeprog /dev/i2c-1 0x51 -x -r 0x22:0x20\n" " 3- write the current timestamp at address 0x200 of the EEPROM on\n" " bus 0 at address 0x33\n" -" date | eeprog /dev/i2c-0 0x33 -w 0x200\n" ; +" date | eeprog -f /dev/i2c-0 0x33 -w 0x200\n" ;if (!b)return ;
Signature · 1 line
2.39.2
Wolfram Sang
AppliedQuoted 4 lines · Thomas Richard
When a pipe is used to send data to eeprog, the force option shall be used. If not, the first character is catched by
confirm_action().Signed-off-by Thomas Richard <[email protected]>
Thanks, applied!