media: rkisp1: Fix unused value issue
Subsystems (3)
PATCH v4 1/1 media: rkisp1: Fix unused value issue
This commit fixes an unused value issue detected by Coverity (CID 1519008). The error condition for the invalid MIPI CSI-2 is not properly handled as the break statement would only exit the switch block and not the entire loop. Fixed this by returning the error immediately after the switch block.
'Fixes: 8d4f126fde89 ("media: rkisp1: Make the internal CSI-2 receiver optional")'
--- drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c +3 -0
@@ -228,6 +228,9 @@ static int rkisp1_subdev_notifier_register(struct rkisp1_device *rkisp1)break ; } +if (ret) +break ; +/* Parse the endpoint and validate the bus type. */ ret =v4l2_fwnode_endpoint_parse (ep, &vep);if (ret) {
Signature · 1 line
2.34.1
Hi Dheeraj,
Thank you for the patch.
Quoted 5 lines · Dheeraj Reddy Jonnalagadda
This commit fixes an unused value issue detected by Coverity (CID 1519008). The error condition for the invalid MIPI CSI-2 is not properly handled as the break statement would only exit the switch block and not the entire loop. Fixed this by returning the error immediately after the switch block.
The patch doesn't "return immediately". You can write "Fix this by breaking from the look immediately after the switch block when an error occurs." or something similar.
Quoted 3 lines
'Fixes:
8d4f126fde89("media: rkisp1: Make the internal CSI-2 receiver optional")'
The Fixes tag should be formatted on a single line, without outer quotes, and without a blank line between it and the Signed-off-by line:
Quoted 1 line
Signed-off-by Dheeraj Reddy Jonnalagadda <[email protected]>
I can update the commit message when applying the patch, there's no need to submit a v5, unless if you want to. Please let me know if I should take this version and update the commit message, or if you will send a v5.
Quoted 18 lines
--- drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c | 3 +++ 1 file changed, 3 insertions(+)drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c +3
-0@@ -228,6 +228,9 @@ static int rkisp1_subdev_notifier_register(struct rkisp1_device *rkisp1)break ; } +if (ret) +break ; +/* Parse the endpoint and validate the bus type. */ ret =v4l2_fwnode_endpoint_parse (ep, &vep);if (ret) {
Signature · 3 lines
Regards, Laurent Pinchart
Jacopo Mondi
Reviewed-byHI Dheeraj
Quoted 24 lines · Laurent Pinchart
Hi Dheeraj,
Thank you for the patch.
Quoted 5 lines · Dheeraj Reddy Jonnalagadda
This commit fixes an unused value issue detected by Coverity (CID 1519008). The error condition for the invalid MIPI CSI-2 is not properly handled as the break statement would only exit the switch block and not the entire loop. Fixed this by returning the error immediately after the switch block.
The patch doesn't "return immediately". You can write "Fix this by breaking from the look immediately after the switch block when an error occurs." or something similar.
Quoted 3 lines
'Fixes:
8d4f126fde89("media: rkisp1: Make the internal CSI-2 receiver optional")'The Fixes tag should be formatted on a single line, without outer quotes, and without a blank line between it and the Signed-off-by line:
Fixes 8d4f126fde89 ("media: rkisp1: Make the internal CSI-2 receiver optional")
Quoted 8 lines
Quoted 1 line
Signed-off-by Dheeraj Reddy Jonnalagadda <[email protected]>I can update the commit message when applying the patch, there's no need to submit a v5, unless if you want to. Please let me know if I should take this version and update the commit message, or if you will send a v5.
Reviewed-by Laurent Pinchart <[email protected]>
And when you receive a tag in a previous patch version, please carry it over to the next version you'll send ;)
Thanks
j
Quoted 25 lines
Quoted 10 lines
--- drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c | 3 +++ 1 file changed, 3 insertions(+)drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c +0
-0drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c static int rkisp1_subdev_notifier_register(struct rkisp1_device *rkisp1) · line 236
Quoted 9 lines
drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c +3
-0@@ -228,6 +228,9 @@ static int rkisp1_subdev_notifier_register(struct rkisp1_device *rkisp1)break ; } +if (ret) +break ; +/* Parse the endpoint and validate the bus type. */ ret =v4l2_fwnode_endpoint_parse (ep, &vep);if (ret) {--
Regards,Laurent Pinchart
Quoted 45 lines · Laurent Pinchart
Hi Dheeraj,
Thank you for the patch.
Quoted 5 lines · Dheeraj Reddy Jonnalagadda
This commit fixes an unused value issue detected by Coverity (CID 1519008). The error condition for the invalid MIPI CSI-2 is not properly handled as the break statement would only exit the switch block and not the entire loop. Fixed this by returning the error immediately after the switch block.
The patch doesn't "return immediately". You can write "Fix this by breaking from the look immediately after the switch block when an error occurs." or something similar.
Quoted 3 lines
'Fixes:
8d4f126fde89("media: rkisp1: Make the internal CSI-2 receiver optional")'The Fixes tag should be formatted on a single line, without outer quotes, and without a blank line between it and the Signed-off-by line:
Fixes 8d4f126fde89 ("media: rkisp1: Make the internal CSI-2 receiver optional")Quoted 1 line
Signed-off-by Dheeraj Reddy Jonnalagadda <[email protected]>I can update the commit message when applying the patch, there's no need to submit a v5, unless if you want to. Please let me know if I should take this version and update the commit message, or if you will send a v5.
Reviewed-by Laurent Pinchart <[email protected]>Quoted 12 lines
--- drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c | 3 +++ 1 file changed, 3 insertions(+)drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c +0
-0@@ -228,6 +228,9 @@ static int rkisp1_subdev_notifier_register(struct rkisp1_device *rkisp1)break ; }
Quoted 11 lines
Quoted 6 lines
drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c +3
-0+if (ret) +break ; +/* Parse the endpoint and validate the bus type. */ ret =v4l2_fwnode_endpoint_parse (ep, &vep);if (ret) {Signature · 3 lines
Regards, Laurent Pinchart
Hi Laurent,
Please go ahead and take this version and apply the patch with the updated commit message.
Thank you and Jacopo for your valuable comments. As a new contributor, your feedback is extremely helpful.
-Dheeraj
Laurent Pinchart
maintainerQuoted 15 lines · Laurent Pinchart
Hi Dheeraj,
Thank you for the patch.
Quoted 5 lines · Dheeraj Reddy Jonnalagadda
This commit fixes an unused value issue detected by Coverity (CID 1519008). The error condition for the invalid MIPI CSI-2 is not properly handled as the break statement would only exit the switch block and not the entire loop. Fixed this by returning the error immediately after the switch block.
The patch doesn't "return immediately". You can write "Fix this by breaking from the look immediately after the switch block when an error occurs." or something similar.
Quoted 7 lines
Quoted 2 lines
'Fixes:
8d4f126fde89("media: rkisp1: Make the internal CSI-2 receiver optional")'The Fixes tag should be formatted on a single line, without outer quotes, and without a blank line between it and the Signed-off-by line:
Fixes 8d4f126fde89 ("media: rkisp1: Make the internal CSI-2 receiver optional")
That commit ID doesn't exist in the git history. The commit corresponding to the message is 7d4f126fde89. I'll update the commit message accordingly.
Quoted 27 lines
Quoted 1 line
Signed-off-by Dheeraj Reddy Jonnalagadda <[email protected]>I can update the commit message when applying the patch, there's no need to submit a v5, unless if you want to. Please let me know if I should take this version and update the commit message, or if you will send a v5.
Reviewed-by Laurent Pinchart <[email protected]>Quoted 18 lines
--- drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c | 3 +++ 1 file changed, 3 insertions(+)drivers/media/platform/rockchip/rkisp1/rkisp1-dev.c +3
-0@@ -228,6 +228,9 @@ static int rkisp1_subdev_notifier_register(struct rkisp1_device *rkisp1)break ; } +if (ret) +break ; +/* Parse the endpoint and validate the bus type. */ ret =v4l2_fwnode_endpoint_parse (ep, &vep);if (ret) {
Signature · 3 lines
Regards, Laurent Pinchart