Skip to contentSkip to conversation

arm64: dts: ti: k3-am654-main: Update otap-del-sel values

PATCH Applied Faiz Abbas 2 participants 3 messages May 19, 2020 – Jun 22, 2020

Subsystems (2)
lore
Share & tools
lore

Faiz Abbas

author
#0 lore raw

PATCH v3 1/1 arm64: dts: ti: k3-am654-main: Update otap-del-sel values

According to the latest AM65x Data Manual[1], a different output tap delay value is optimum for a given speed mode. Update these values.

[1] http://www.ti.com/lit/gpn/am6526

---

v3: Updated values to the latest data manual revision

v2: Updated to the latest mainline kernel

 arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +11 -1
index 11887c72f23a..056130a126f9 100644
@@ -244,7 +244,17 @@
 		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		ti,otap-del-sel = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x5>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,otap-del-sel-hs400 = <0x0>;
 		ti,trm-icp = <0x8>;
 		dma-coherent;
 	};
Signature · 7 lines
2.17.1


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author
#1 lore raw

Hi,

Quoted 12 lines · Faiz Abbas

According to the latest AM65x Data Manual[1], a different output tap delay value is optimum for a given speed mode. Update these values.

[1] http://www.ti.com/lit/gpn/am6526

---

v3: Updated values to the latest data manual revision

v2: Updated to the latest mainline kernel

Can this patch be picked up?

Thanks,
Faiz

Applied
#2 lore raw
In reply to Faiz Abbas
Quoted 6 lines · Faiz Abbas

According to the latest AM65x Data Manual[1], a different output tap delay value is optimum for a given speed mode. Update these values.

[1] http://www.ti.com/lit/gpn/am6526

Queued up for 5.9, thanks.

-Tero

Quoted 23 lines

---

v3: Updated values to the latest data manual revision

v2: Updated to the latest mainline kernel

  arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 12 +++++++++++-
  1 file changed, 11 insertions(+), 1 deletion(-)
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +4 -1
index 11887c72f23a..056130a126f9 100644
@@ -244,7 +244,17 @@
  		interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
  		mmc-ddr-1_8v;
  		mmc-hs200-1_8v;
-		ti,otap-del-sel = <0x2>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0x0>;

arch/arm64/boot/dts/ti/k3-am65-main.dtsi line 260

Quoted 10 lines
arch/arm64/boot/dts/ti/k3-am65-main.dtsi +7 -0
+		ti,otap-del-sel-sdr25 = <0x0>;
+		ti,otap-del-sel-sdr50 = <0x8>;
+		ti,otap-del-sel-sdr104 = <0x7>;
+		ti,otap-del-sel-ddr50 = <0x5>;
+		ti,otap-del-sel-ddr52 = <0x5>;
+		ti,otap-del-sel-hs200 = <0x5>;
+		ti,otap-del-sel-hs400 = <0x0>;
  		ti,trm-icp = <0x8>;
  		dma-coherent;
  	};

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki