Skip to contentSkip to conversation

acpi: refactor error prone build_header() and packed structures usage in ACPI tables

PATCH In review Igor Mammedov 4 participants 40 messages Sep 24, 2021 – Sep 27, 2021

lore
Share & tools
lore
#0 lore raw

v4 cover acpi: refactor error prone build_header() and packed structures usage in ACPI tables

v4:
1. comments fixups and diing missing comments
2. clean up spurious changes
3. rebase on top of (4be8bfcb4d hw/i386/acpi-build: Fix a typo)
4. convert build_iort:
* keep nb_nodes variable
* encode 'Memory access properties' as separate entries according to Table 13

v3:
1. s/acpi_init_table()|acpi_table_composed()/acpi_table_begin()|acpi_table_end()/
2. arm:madt fix incorrect length
3. various comment improvments
4. rewrite IORT conversion patch due to heavy conflicts with bypass iommu code merged recently
5 pick up Eric's Reviewed-By where there wasn't significant change (1)

v2:
- drop test related patches, they will be sent as a separate series
- fix bios_loader pointer initialization ordering when using TPM1.2
- extend commit message of [1/35] and add extra comment about table length patching

Highlights:
* drop pointer arithmetic in ACPI tables code
* use endian agnostic API
* simplifies review of tables. /in most cases just line by line comparision with spec/

Series replaces build_header() with acpi_table_begin()/acpi_table_end() API that hides pointer/offset arithmetic from user, to prevent errors caused by it [1].
While doing above, it was necessary to split table header from packed structure that was describing the table, which is counter-productive since it still leaves packed structure drawbacks. So that sort of forced me to rewrite tables that were composed with help of packed structures to preferred build_append_int_noprefix() API. In cases where refactoring to build_append_int_noprefix() was small, it was squashed with acpi_table_begin()/acpi_table_end() patch. Conversion reduced code size quite a bit despite me adding doc comments for every table row.

1) commits
bb9feea43179 x86: acpi: use offset instead of pointer when using build_header() 4d027afeb3a9 Virt: ACPI: fix qemu assert due to re-assigned table data address

Link to repo with this series and tests to validate it:
https://gitlab.com/imammedo/qemu/-/commits/acpi_build_header_refactoring_v4

Previous v3 revision can be found at:
https://lore.kernel.org/qemu-devel/[email protected]/T/

Igor Mammedov (35):
acpi: add helper routines to initialize ACPI tables
acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_xsdt: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_slit: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_tpm2: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: acpi_build_hest: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: build_mcfg: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_hmat: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: nvdimm_build_nfit: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: nvdimm_build_ssdt: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: vmgenid_build_acpi: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: x86: build_dsdt: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: build_hpet: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_tpm_tcpa: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: use build_append_int_noprefix() API to compose SRAT table
acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: build_waet: use acpi_table_begin()/acpi_table_end() instead of
build_header()
acpi: build_amd_iommu: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: madt: arm/x86: use acpi_table_begin()/acpi_table_end() instead
of build_header()
acpi: x86: remove dead code
acpi: x86: set enabled when composing _MAT entries
acpi: x86: madt: use build_append_int_noprefix() API to compose MADT
table
acpi: arm/virt: madt: use build_append_int_noprefix() API to compose
MADT table
acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm/virt: convert build_iort() to endian agnostic
build_append_FOO() API
acpi: arm/virt: build_spcr: fix invalid cast
acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end()
instead of build_header()
acpi: build_facs: use build_append_int_noprefix() API to compose table
acpi: remove no longer used build_header()
acpi: AcpiGenericAddress no longer used to map/access fields of MMIO,
drop packed attribute

 include/hw/acpi/acpi-defs.h          | 528 +-----------------------
 include/hw/acpi/acpi_dev_interface.h |   3 +-
 include/hw/acpi/aml-build.h          |  37 +-
 include/hw/i386/pc.h                 |   6 +-
 hw/acpi/acpi-x86-stub.c              |   3 +-
 hw/acpi/aml-build.c                  | 203 ++++++----
 hw/acpi/cpu.c                        |  17 +-
 hw/acpi/ghes.c                       |  10 +-
 hw/acpi/hmat.c                       |  14 +-
 hw/acpi/nvdimm.c                     |  64 ++-
 hw/acpi/pci.c                        |  18 +-
 hw/acpi/vmgenid.c                    |  13 +-
 hw/arm/virt-acpi-build.c             | 577 +++++++++++++++------------
 hw/i386/acpi-build.c                 | 294 ++++++++------
 hw/i386/acpi-common.c                | 160 ++++----
 hw/i386/acpi-microvm.c               |  13 +-
 16 files changed, 801 insertions(+), 1159 deletions(-)
Signature · 1 line
2.27.0
#1 lore raw

PATCH v4 1/35 acpi: add helper routines to initialize ACPI tables

Patch introduces acpi_table_begin()/ acpi_table_end() API that hides pointer/offset arithmetic from user as opposed to build_header(), to prevent errors caused by it [1].

acpi_table_begin():
initializes table header and keeps track of table data/offsets
acpi_table_end():
sets actual table length and tells bios loader where table is for the later initialization on guest side.

1) commits
bb9feea43179 x86: acpi: use offset instead of pointer when using build_header() 4d027afeb3a9 Virt: ACPI: fix qemu assert due to re-assigned table data address

---
CC: [email protected]

---
 include/hw/acpi/aml-build.h | 31 +++++++++++++++++++
 hw/acpi/aml-build.c         | 62 +++++++++++++++++++++++++++++++++++++
 2 files changed, 93 insertions(+)
include/hw/acpi/aml-build.h +31 -0
index 471266d739..4242382399 100644
@@ -413,6 +413,37 @@ Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target);
 Aml *aml_object_type(Aml *object);
 
 void build_append_int_noprefix(GArray *table, uint64_t value, int size);
+
+typedef struct AcpiTable {
+    const char *sig;
+    const uint8_t rev;
+    const char *oem_id;
+    const char *oem_table_id;
+    /* private vars tracking table state */
+    GArray *array;
+    unsigned table_offset;
+} AcpiTable;
+
+/**
+ * acpi_table_begin:
+ * initializes table header and keeps track of
+ * table data/offsets
+ * @desc: ACPI table descriptor
+ * @array: blob where the ACPI table will be composed/stored.
+ */
+void acpi_table_begin(AcpiTable *desc, GArray *array);
+
+/**
+ * acpi_table_end:
+ * sets actual table length and tells bios loader
+ * where table is for the later initialization on
+ * guest side.
+ * @linker: reference to BIOSLinker object to use for the table
+ * @table: ACPI table descriptor that was used with @acpi_table_begin
+ * counterpart
+ */
+void acpi_table_end(BIOSLinker *linker, AcpiTable *table);
+
 void
 build_header(BIOSLinker *linker, GArray *table_data,
              AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
hw/acpi/aml-build.c +62 -0

74 lines not on this page · raw message

Signature · 1 line
2.27.0
Tested-by on v4 1/35
#2 lore raw

Re: [PATCH v4 01/35] acpi: add helper routines to initialize ACPI tables

Quoted 12 lines · Igor Mammedov

Patch introduces acpi_table_begin()/ acpi_table_end() API that hides pointer/offset arithmetic from user as opposed to build_header(), to prevent errors caused by it [1].

acpi_table_begin():
initializes table header and keeps track of table data/offsets
acpi_table_end():
sets actual table length and tells bios loader where table is for the later initialization on guest side.

Quoted 6 lines

1) commits
bb9feea43179 x86: acpi: use offset instead of pointer when using build_header() 4d027afeb3a9 Virt: ACPI: fix qemu assert due to re-assigned table data address

Quoted 129 lines

---
CC: [email protected]

---
  include/hw/acpi/aml-build.h | 31 +++++++++++++++++++
  hw/acpi/aml-build.c         | 62 +++++++++++++++++++++++++++++++++++++
  2 files changed, 93 insertions(+)
include/hw/acpi/aml-build.h +31 -0
index 471266d739..4242382399 100644
@@ -413,6 +413,37 @@ Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target);
  Aml *aml_object_type(Aml *object);
 
  void build_append_int_noprefix(GArray *table, uint64_t value, int size);
+
+typedef struct AcpiTable {
+    const char *sig;
+    const uint8_t rev;
+    const char *oem_id;
+    const char *oem_table_id;
+    /* private vars tracking table state */
+    GArray *array;
+    unsigned table_offset;
+} AcpiTable;
+
+/**
+ * acpi_table_begin:
+ * initializes table header and keeps track of
+ * table data/offsets
+ * @desc: ACPI table descriptor
+ * @array: blob where the ACPI table will be composed/stored.
+ */
+void acpi_table_begin(AcpiTable *desc, GArray *array);
+
+/**
+ * acpi_table_end:
+ * sets actual table length and tells bios loader
+ * where table is for the later initialization on
+ * guest side.
+ * @linker: reference to BIOSLinker object to use for the table
+ * @table: ACPI table descriptor that was used with @acpi_table_begin
+ * counterpart
+ */
+void acpi_table_end(BIOSLinker *linker, AcpiTable *table);
+
  void
  build_header(BIOSLinker *linker, GArray *table_data,
               AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
hw/acpi/aml-build.c +62 -0
index d5103e6d7b..229a3eb654 100644
@@ -52,6 +52,19 @@ static void build_append_byte(GArray *array, uint8_t val)
      g_array_append_val(array, val);
  }
 
+static void build_append_padded_str(GArray *array, const char *str,
+                                    size_t maxlen, char pad)
+{
+    size_t i;
+    size_t len = strlen(str);
+
+    g_assert(len <= maxlen);
+    g_array_append_vals(array, str, len);
+    for (i = maxlen - len; i > 0; i--) {
+        g_array_append_val(array, pad);
+    }
+}
+
  static void build_append_array(GArray *array, GArray *val)
  {
      g_array_append_vals(array, val->data, val->len);
@@ -1692,6 +1705,55 @@ Aml *aml_object_type(Aml *object)
      return var;
  }
 
+void acpi_table_begin(AcpiTable *desc, GArray *array)
+{
+
+    desc->array = array;
+    desc->table_offset = array->len;
+
+    /*
+     * ACPI spec 1.0b
+     * 5.2.3 System Description Table Header
+     */
+    g_assert(strlen(desc->sig) == 4);
+    g_array_append_vals(array, desc->sig, 4); /* Signature */
+    /*
+     * reserve space for Length field, which will be patched by
+     * acpi_table_end() when the table creation is finished.
+     */
+    build_append_int_noprefix(array, 0, 4); /* Length */
+    build_append_int_noprefix(array, desc->rev, 1); /* Revision */
+    build_append_int_noprefix(array, 0, 1); /* Checksum */
+    build_append_padded_str(array, desc->oem_id, 6, ' '); /* OEMID */
+    /* OEM Table ID */
+    build_append_padded_str(array, desc->oem_table_id, 8, ' ');
+    build_append_int_noprefix(array, 1, 4); /* OEM Revision */
+    g_array_append_vals(array, ACPI_BUILD_APPNAME8, 4); /* Creator ID */
+    build_append_int_noprefix(array, 1, 4); /* Creator Revision */
+}
+
+void acpi_table_end(BIOSLinker *linker, AcpiTable *desc)
+{
+    /*
+     * ACPI spec 1.0b
+     * 5.2.3 System Description Table Header
+     * Table 5-2 DESCRIPTION_HEADER Fields
+     */
+    const unsigned checksum_offset = 9;
+    uint32_t table_len = desc->array->len - desc->table_offset;
+    uint32_t table_len_le = cpu_to_le32(table_len);
+    gchar *len_ptr = &desc->array->data[desc->table_offset + 4];
+
+    /* patch "Length" field that has been reserved by acpi_table_begin()
+     * to the actual length, i.e. accumulated table length from
+     * acpi_table_begin() till acpi_table_end()
+     */
+    memcpy(len_ptr, &table_len_le, sizeof table_len_le);
+
+    bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE,
+        desc->table_offset, table_len, desc->table_offset + checksum_offset);
+}
+
  void
  build_header(BIOSLinker *linker, GArray *table_data,
               AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
Tested-by on v4 1/35
#3 lore raw

Re: [PATCH v4 01/35] acpi: add helper routines to initialize ACPI tables

In reply to Igor Mammedov

Hi,

Quoted 137 lines · Igor Mammedov

Patch introduces acpi_table_begin()/ acpi_table_end() API that hides pointer/offset arithmetic from user as opposed to build_header(), to prevent errors caused by it [1].

acpi_table_begin():
initializes table header and keeps track of table data/offsets
acpi_table_end():
sets actual table length and tells bios loader where table is for the later initialization on guest side.

1) commits
bb9feea43179 x86: acpi: use offset instead of pointer when using build_header() 4d027afeb3a9 Virt: ACPI: fix qemu assert due to re-assigned table data address

---
CC: [email protected]

---
  include/hw/acpi/aml-build.h | 31 +++++++++++++++++++
  hw/acpi/aml-build.c         | 62 +++++++++++++++++++++++++++++++++++++
  2 files changed, 93 insertions(+)
include/hw/acpi/aml-build.h +31 -0
index 471266d739..4242382399 100644
@@ -413,6 +413,37 @@ Aml *aml_concatenate(Aml *source1, Aml *source2, Aml *target);
  Aml *aml_object_type(Aml *object);
 
  void build_append_int_noprefix(GArray *table, uint64_t value, int size);
+
+typedef struct AcpiTable {
+    const char *sig;
+    const uint8_t rev;
+    const char *oem_id;
+    const char *oem_table_id;
+    /* private vars tracking table state */
+    GArray *array;
+    unsigned table_offset;
+} AcpiTable;
+
+/**
+ * acpi_table_begin:
+ * initializes table header and keeps track of
+ * table data/offsets
+ * @desc: ACPI table descriptor
+ * @array: blob where the ACPI table will be composed/stored.
+ */
+void acpi_table_begin(AcpiTable *desc, GArray *array);
+
+/**
+ * acpi_table_end:
+ * sets actual table length and tells bios loader
+ * where table is for the later initialization on
+ * guest side.
+ * @linker: reference to BIOSLinker object to use for the table
+ * @table: ACPI table descriptor that was used with @acpi_table_begin
+ * counterpart
+ */
+void acpi_table_end(BIOSLinker *linker, AcpiTable *table);
+
  void
  build_header(BIOSLinker *linker, GArray *table_data,
               AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
hw/acpi/aml-build.c +55 -0
index d5103e6d7b..229a3eb654 100644
@@ -52,6 +52,19 @@ static void build_append_byte(GArray *array, uint8_t val)
      g_array_append_val(array, val);
  }
 
+static void build_append_padded_str(GArray *array, const char *str,
+                                    size_t maxlen, char pad)
+{
+    size_t i;
+    size_t len = strlen(str);
+
+    g_assert(len <= maxlen);
+    g_array_append_vals(array, str, len);
+    for (i = maxlen - len; i > 0; i--) {
+        g_array_append_val(array, pad);
+    }
+}
+
  static void build_append_array(GArray *array, GArray *val)
  {
      g_array_append_vals(array, val->data, val->len);
@@ -1692,6 +1705,55 @@ Aml *aml_object_type(Aml *object)
      return var;
  }
 
+void acpi_table_begin(AcpiTable *desc, GArray *array)
+{
+
+    desc->array = array;
+    desc->table_offset = array->len;
+
+    /*
+     * ACPI spec 1.0b
+     * 5.2.3 System Description Table Header
+     */
+    g_assert(strlen(desc->sig) == 4);
+    g_array_append_vals(array, desc->sig, 4); /* Signature */
+    /*
+     * reserve space for Length field, which will be patched by
+     * acpi_table_end() when the table creation is finished.
+     */
+    build_append_int_noprefix(array, 0, 4); /* Length */
+    build_append_int_noprefix(array, desc->rev, 1); /* Revision */
+    build_append_int_noprefix(array, 0, 1); /* Checksum */
+    build_append_padded_str(array, desc->oem_id, 6, ' '); /* OEMID */
+    /* OEM Table ID */
+    build_append_padded_str(array, desc->oem_table_id, 8, ' ');
+    build_append_int_noprefix(array, 1, 4); /* OEM Revision */
+    g_array_append_vals(array, ACPI_BUILD_APPNAME8, 4); /* Creator ID */
+    build_append_int_noprefix(array, 1, 4); /* Creator Revision */
+}
+
+void acpi_table_end(BIOSLinker *linker, AcpiTable *desc)
+{
+    /*
+     * ACPI spec 1.0b
+     * 5.2.3 System Description Table Header
+     * Table 5-2 DESCRIPTION_HEADER Fields
+     */
+    const unsigned checksum_offset = 9;
+    uint32_t table_len = desc->array->len - desc->table_offset;
+    uint32_t table_len_le = cpu_to_le32(table_len);
+    gchar *len_ptr = &desc->array->data[desc->table_offset + 4];
+
+    /* patch "Length" field that has been reserved by acpi_table_begin()
+     * to the actual length, i.e. accumulated table length from
+     * acpi_table_begin() till acpi_table_end()

hw/acpi/aml-build.c Aml *aml_object_type(Aml *object) · line 1759

Quoted 10 lines
hw/acpi/aml-build.c +7 -0
+     */
+    memcpy(len_ptr, &table_len_le, sizeof table_len_le);
+
+    bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE,
+        desc->table_offset, table_len, desc->table_offset + checksum_offset);
+}
+
  void
  build_header(BIOSLinker *linker, GArray *table_data,
               AcpiTableHeader *h, const char *sig, int len, uint8_t rev,

I have rewrote the ACPI PPTT table generation patches based on this series, and the testing output of PPTT was as expected. So for the functionality of the APIs:

Thanks,
Yanan
.

#4 lore raw

PATCH v4 2/35 acpi: build_rsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offests magic from API user.

While at it switch to build_append_int_noprefix() to build entries to other tables (which also removes some manual offset calculations).

---
v4:
* add expected doc comment above build_rsdt()
(Eric Auger <[email protected]>)
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 10 ----------
 hw/acpi/aml-build.c         | 31 +++++++++++++++----------------
 2 files changed, 15 insertions(+), 26 deletions(-)
include/hw/acpi/acpi-defs.h +0 -10
index cf9f44299c..ccfa3382aa 100644
@@ -149,16 +149,6 @@ struct AcpiSerialPortConsoleRedirection {
 typedef struct AcpiSerialPortConsoleRedirection
                AcpiSerialPortConsoleRedirection;
 
-/*
- * ACPI 1.0 Root System Description Table (RSDT)
- */
-struct AcpiRsdtDescriptorRev1 {
-    ACPI_TABLE_HEADER_DEF       /* ACPI common table header */
-    uint32_t table_offset_entry[];  /* Array of pointers to other */
-    /* ACPI tables */
-} QEMU_PACKED;
-typedef struct AcpiRsdtDescriptorRev1 AcpiRsdtDescriptorRev1;
-
 /*
  * ACPI 2.0 eXtended System Description Table (XSDT)
  */
hw/acpi/aml-build.c +15 -16
index 229a3eb654..616a292229 100644
@@ -1884,33 +1884,32 @@ build_rsdp(GArray *tbl, BIOSLinker *linker, AcpiRsdpData *rsdp_data)
                                     32);
 }
 
-/* Build rsdt table */
+/*
+ * ACPI 1.0 Root System Description Table (RSDT)
+ */
 void
 build_rsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
            const char *oem_id, const char *oem_table_id)
 {
     int i;
-    unsigned rsdt_entries_offset;
-    AcpiRsdtDescriptorRev1 *rsdt;
-    int rsdt_start = table_data->len;
-    const unsigned table_data_len = (sizeof(uint32_t) * table_offsets->len);
-    const unsigned rsdt_entry_size = sizeof(rsdt->table_offset_entry[0]);
-    const size_t rsdt_len = sizeof(*rsdt) + table_data_len;
-
-    rsdt = acpi_data_push(table_data, rsdt_len);
-    rsdt_entries_offset = (char *)rsdt->table_offset_entry - table_data->data;
+    AcpiTable table = { .sig = "RSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
     for (i = 0; i < table_offsets->len; ++i) {
         uint32_t ref_tbl_offset = g_array_index(table_offsets, uint32_t, i);
-        uint32_t rsdt_entry_offset = rsdt_entries_offset + rsdt_entry_size * i;
+        uint32_t rsdt_entry_offset = table.array->len;
 
-        /* rsdt->table_offset_entry to be filled by Guest linker */
+        /* reserve space for entry */
+        build_append_int_noprefix(table.array, 0, 4);
+
+        /* mark position of RSDT entry to be filled by Guest linker */
         bios_linker_loader_add_pointer(linker,
-            ACPI_BUILD_TABLE_FILE, rsdt_entry_offset, rsdt_entry_size,
+            ACPI_BUILD_TABLE_FILE, rsdt_entry_offset, 4,
             ACPI_BUILD_TABLE_FILE, ref_tbl_offset);
+
     }
-    build_header(linker, table_data,
-                 (void *)(table_data->data + rsdt_start),
-                 "RSDT", rsdt_len, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* Build xsdt table */
Signature · 1 line
2.27.0
#5 lore raw

PATCH v4 3/35 acpi: build_xsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build entries to other tables (which also removes some manual offset calculations).

---
v4:
* add expected doc comment above build_xsdt()
(Eric Auger <[email protected]>)
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 10 ----------
 hw/acpi/aml-build.c         | 31 +++++++++++++++----------------
 2 files changed, 15 insertions(+), 26 deletions(-)
include/hw/acpi/acpi-defs.h +0 -10
index ccfa3382aa..f6d2ca172b 100644
@@ -149,16 +149,6 @@ struct AcpiSerialPortConsoleRedirection {
 typedef struct AcpiSerialPortConsoleRedirection
                AcpiSerialPortConsoleRedirection;
 
-/*
- * ACPI 2.0 eXtended System Description Table (XSDT)
- */
-struct AcpiXsdtDescriptorRev2 {
-    ACPI_TABLE_HEADER_DEF       /* ACPI common table header */
-    uint64_t table_offset_entry[];  /* Array of pointers to other */
-    /* ACPI tables */
-} QEMU_PACKED;
-typedef struct AcpiXsdtDescriptorRev2 AcpiXsdtDescriptorRev2;
-
 /*
  * ACPI 1.0 Firmware ACPI Control Structure (FACS)
  */
hw/acpi/aml-build.c +15 -16
index 616a292229..86b8322ee1 100644
@@ -1912,33 +1912,32 @@ build_rsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
     acpi_table_end(linker, &table);
 }
 
-/* Build xsdt table */
+/*
+ * ACPI 2.0 eXtended System Description Table (XSDT)
+ */
 void
 build_xsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
            const char *oem_id, const char *oem_table_id)
 {
     int i;
-    unsigned xsdt_entries_offset;
-    AcpiXsdtDescriptorRev2 *xsdt;
-    int xsdt_start = table_data->len;
-    const unsigned table_data_len = (sizeof(uint64_t) * table_offsets->len);
-    const unsigned xsdt_entry_size = sizeof(xsdt->table_offset_entry[0]);
-    const size_t xsdt_len = sizeof(*xsdt) + table_data_len;
-
-    xsdt = acpi_data_push(table_data, xsdt_len);
-    xsdt_entries_offset = (char *)xsdt->table_offset_entry - table_data->data;
+    AcpiTable table = { .sig = "XSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
+
     for (i = 0; i < table_offsets->len; ++i) {
         uint64_t ref_tbl_offset = g_array_index(table_offsets, uint32_t, i);
-        uint64_t xsdt_entry_offset = xsdt_entries_offset + xsdt_entry_size * i;
+        uint64_t xsdt_entry_offset = table.array->len;
 
-        /* xsdt->table_offset_entry to be filled by Guest linker */
+        /* reserve space for entry */
+        build_append_int_noprefix(table.array, 0, 8);
+
+        /* mark position of RSDT entry to be filled by Guest linker */
         bios_linker_loader_add_pointer(linker,
-            ACPI_BUILD_TABLE_FILE, xsdt_entry_offset, xsdt_entry_size,
+            ACPI_BUILD_TABLE_FILE, xsdt_entry_offset, 8,
             ACPI_BUILD_TABLE_FILE, ref_tbl_offset);
     }
-    build_header(linker, table_data,
-                 (void *)(table_data->data + xsdt_start),
-                 "XSDT", xsdt_len, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
Signature · 1 line
2.27.0
#6 lore raw

PATCH v4 4/35 acpi: build_slit: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/aml-build.c | 13 +++++--------
 1 file changed, 5 insertions(+), 8 deletions(-)
hw/acpi/aml-build.c +5 -8
index 86b8322ee1..ec870f53ba 100644
@@ -1958,11 +1958,12 @@ void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
 void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
                 const char *oem_id, const char *oem_table_id)
 {
-    int slit_start, i, j;
-    slit_start = table_data->len;
+    int i, j;
     int nb_numa_nodes = ms->numa_state->num_nodes;
+    AcpiTable table = { .sig = "SLIT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
 
     build_append_int_noprefix(table_data, nb_numa_nodes, 8);
     for (i = 0; i < nb_numa_nodes; i++) {
@@ -1973,11 +1974,7 @@ void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
                                       1);
         }
     }
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + slit_start),
-                 "SLIT",
-                 table_data->len - slit_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* build rev1/rev3/rev5.1 FADT */
Signature · 1 line
2.27.0
#7 lore raw

PATCH v4 5/35 acpi: build_fadt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/aml-build.c | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)
hw/acpi/aml-build.c +7 -7
index ec870f53ba..4d0ff6e5f3 100644
@@ -1982,9 +1982,10 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
                 const char *oem_id, const char *oem_table_id)
 {
     int off;
-    int fadt_start = tbl->len;
+    AcpiTable table = { .sig = "FACP", .rev = f->rev,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    acpi_data_push(tbl, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, tbl);
 
     /* FACS address to be filled by Guest linker at runtime */
     off = tbl->len;
@@ -2048,7 +2049,7 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
     build_append_int_noprefix(tbl, f->flags, 4); /* Flags */
 
     if (f->rev == 1) {
-        goto build_hdr;
+        goto done;
     }
 
     build_append_gas_from_struct(tbl, &f->reset_reg); /* RESET_REG */
@@ -2085,7 +2086,7 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
     build_append_gas(tbl, AML_AS_SYSTEM_MEMORY, 0 , 0, 0, 0); /* X_GPE1_BLK */
 
     if (f->rev <= 4) {
-        goto build_hdr;
+        goto done;
     }
 
     /* SLEEP_CONTROL_REG */
@@ -2096,9 +2097,8 @@ void build_fadt(GArray *tbl, BIOSLinker *linker, const AcpiFadtData *f,
     /* TODO: extra fields need to be added to support revisions above rev5 */
     assert(f->rev == 5);
 
-build_hdr:
-    build_header(linker, tbl, (void *)(tbl->data + fadt_start),
-                 "FACP", tbl->len - fadt_start, f->rev, oem_id, oem_table_id);
+done:
+    acpi_table_end(linker, &table);
 }
 
 #ifdef CONFIG_TPM
Signature · 1 line
2.27.0
#8 lore raw

PATCH v4 6/35 acpi: build_tpm2: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/aml-build.c | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)
hw/acpi/aml-build.c +5 -6
index 4d0ff6e5f3..23cda45ee0 100644
@@ -2111,13 +2111,14 @@ void build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
                 const char *oem_id, const char *oem_table_id)
 {
     uint8_t start_method_params[12] = {};
-    unsigned log_addr_offset, tpm2_start;
+    unsigned log_addr_offset;
     uint64_t control_area_start_address;
     TPMIf *tpmif = tpm_find();
     uint32_t start_method;
+    AcpiTable table = { .sig = "TPM2", .rev = 4,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    tpm2_start = table_data->len;
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
 
     /* Platform Class */
     build_append_int_noprefix(table_data, TPM2_ACPI_CLASS_CLIENT, 2);
@@ -2155,9 +2156,7 @@ void build_tpm2(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
     bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
                                    log_addr_offset, 8,
                                    ACPI_BUILD_TPMLOG_FILE, 0);
-    build_header(linker, table_data,
-                 (void *)(table_data->data + tpm2_start),
-                 "TPM2", table_data->len - tpm2_start, 4, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 #endif
 
Signature · 1 line
2.27.0
#9 lore raw

PATCH v4 7/35 acpi: acpi_build_hest: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/ghes.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/acpi/ghes.c +4 -6
index a749b84d62..45d9a809cc 100644
@@ -362,18 +362,16 @@ static void build_ghes_v2(GArray *table_data, int source_id, BIOSLinker *linker)
 void acpi_build_hest(GArray *table_data, BIOSLinker *linker,
                      const char *oem_id, const char *oem_table_id)
 {
-    uint64_t hest_start = table_data->len;
+    AcpiTable table = { .sig = "HEST", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    /* Hardware Error Source Table header*/
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
 
     /* Error Source Count */
     build_append_int_noprefix(table_data, ACPI_GHES_ERROR_SOURCE_COUNT, 4);
-
     build_ghes_v2(table_data, ACPI_HEST_SRC_ID_SEA, linker);
 
-    build_header(linker, table_data, (void *)(table_data->data + hest_start),
-                 "HEST", table_data->len - hest_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 void acpi_ghes_add_fw_cfg(AcpiGhesState *ags, FWCfgState *s,
Signature · 1 line
2.27.0
#10 lore raw

PATCH v4 8/35 acpi: build_mcfg: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/pci.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
hw/acpi/pci.c +9 -9
index 75b1103ec4..20b70dcd81 100644
@@ -28,19 +28,20 @@
 #include "hw/acpi/pci.h"
 #include "hw/pci/pcie_host.h"
 
+/*
+ * PCI Firmware Specification, Revision 3.0
+ * 4.1.2 MCFG Table Description.
+ */
 void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info,
                 const char *oem_id, const char *oem_table_id)
 {
-    int mcfg_start = table_data->len;
+    AcpiTable table = { .sig = "MCFG", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
+
+    acpi_table_begin(&table, table_data);
 
-    /*
-     * PCI Firmware Specification, Revision 3.0
-     * 4.1.2 MCFG Table Description.
-     */
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
     /* Reserved */
     build_append_int_noprefix(table_data, 0, 8);
-
     /*
      * Memory Mapped Enhanced Configuration Space Base Address Allocation
      * Structure
@@ -56,6 +57,5 @@ void build_mcfg(GArray *table_data, BIOSLinker *linker, AcpiMcfgInfo *info,
     /* Reserved */
     build_append_int_noprefix(table_data, 0, 4);
 
-    build_header(linker, table_data, (void *)(table_data->data + mcfg_start),
-                 "MCFG", table_data->len - mcfg_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
Signature · 1 line
2.27.0
#11 lore raw

PATCH v4 9/35 acpi: build_hmat: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Also since acpi_table_begin() reserves space only for standard header while previous acpi_data_push() reserved the header + 4 bytes field, add 4 bytes 'Reserved' field into hmat_build_table_structs() which didn have it.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/hmat.c | 14 ++++++--------
 1 file changed, 6 insertions(+), 8 deletions(-)
hw/acpi/hmat.c +6 -8
index edb3fd91b2..6913ebf730 100644
@@ -200,6 +200,8 @@ static void hmat_build_table_structs(GArray *table_data, NumaState *numa_state)
     HMAT_LB_Info *hmat_lb;
     NumaHmatCacheOptions *hmat_cache;
 
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+
     for (i = 0; i < numa_state->num_nodes; i++) {
         flags = 0;
 
@@ -256,14 +258,10 @@ static void hmat_build_table_structs(GArray *table_data, NumaState *numa_state)
 void build_hmat(GArray *table_data, BIOSLinker *linker, NumaState *numa_state,
                 const char *oem_id, const char *oem_table_id)
 {
-    int hmat_start = table_data->len;
-
-    /* reserve space for HMAT header  */
-    acpi_data_push(table_data, 40);
+    AcpiTable table = { .sig = "HMAT", .rev = 2,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
+    acpi_table_begin(&table, table_data);
     hmat_build_table_structs(table_data, numa_state);
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + hmat_start),
-                 "HMAT", table_data->len - hmat_start, 2, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
Signature · 1 line
2.27.0
#12 lore raw

PATCH v4 10/35 acpi: nvdimm_build_nfit: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

Also since acpi_table_begin() reserves space only for standard header while previous acpi_data_push() reserved the header + 4 bytes field, add 4 bytes 'Reserved' field into nvdimm_build_nfit() which didn't have it.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/nvdimm.c | 42 +++++++++++++++++-------------------------
 1 file changed, 17 insertions(+), 25 deletions(-)
hw/acpi/nvdimm.c +17 -25
index e3d5fe1939..15f6ca82ca 100644
@@ -44,22 +44,6 @@ static const uint8_t nvdimm_nfit_spa_uuid[] =
       UUID_LE(0x66f0d379, 0xb4f3, 0x4074, 0xac, 0x43, 0x0d, 0x33,
               0x18, 0xb7, 0x8c, 0xdb);
 
-/*
- * NVDIMM Firmware Interface Table
- * @signature: "NFIT"
- *
- * It provides information that allows OSPM to enumerate NVDIMM present in
- * the platform and associate system physical address ranges created by the
- * NVDIMMs.
- *
- * It is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
- */
-struct NvdimmNfitHeader {
-    ACPI_TABLE_HEADER_DEF
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct NvdimmNfitHeader NvdimmNfitHeader;
-
 /*
  * define NFIT structures according to ACPI 6.0: 5.2.25 NVDIMM Firmware
  * Interface Table (NFIT).
@@ -401,25 +385,33 @@ void nvdimm_plug(NVDIMMState *state)
     nvdimm_build_fit_buffer(state);
 }
 
+/*
+ * NVDIMM Firmware Interface Table
+ * @signature: "NFIT"
+ *
+ * It provides information that allows OSPM to enumerate NVDIMM present in
+ * the platform and associate system physical address ranges created by the
+ * NVDIMMs.
+ *
+ * It is defined in ACPI 6.0: 5.2.25 NVDIMM Firmware Interface Table (NFIT)
+ */
+
 static void nvdimm_build_nfit(NVDIMMState *state, GArray *table_offsets,
                               GArray *table_data, BIOSLinker *linker,
                               const char *oem_id, const char *oem_table_id)
 {
     NvdimmFitBuffer *fit_buf = &state->fit_buf;
-    unsigned int header;
+    AcpiTable table = { .sig = "NFIT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
     acpi_add_table(table_offsets, table_data);
 
-    /* NFIT header. */
-    header = table_data->len;
-    acpi_data_push(table_data, sizeof(NvdimmNfitHeader));
+    acpi_table_begin(&table, table_data);
+    /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4);
     /* NVDIMM device structures. */
     g_array_append_vals(table_data, fit_buf->fit->data, fit_buf->fit->len);
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + header), "NFIT",
-                 sizeof(NvdimmNfitHeader) + fit_buf->fit->len, 1, oem_id,
-                 oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 #define NVDIMM_DSM_MEMORY_SIZE      4096
Signature · 1 line
2.27.0
#13 lore raw

PATCH v4 11/35 acpi: nvdimm_build_ssdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v4:
* s/acpi_table_composed/acpi_table_end/
(Reviewed-by: Eric Auger <[email protected]>)
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/nvdimm.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
hw/acpi/nvdimm.c +10 -8
index 15f6ca82ca..a7539cfe89 100644
@@ -1274,14 +1274,15 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
                               NVDIMMState *nvdimm_state,
                               uint32_t ram_slots, const char *oem_id)
 {
+    int mem_addr_offset;
     Aml *ssdt, *sb_scope, *dev;
-    int mem_addr_offset, nvdimm_ssdt;
+    AcpiTable table = { .sig = "SSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = "NVDIMM" };
 
     acpi_add_table(table_offsets, table_data);
 
+    acpi_table_begin(&table, table_data);
     ssdt = init_aml_allocator();
-    acpi_data_push(ssdt->buf, sizeof(AcpiTableHeader));
-
     sb_scope = aml_scope("\\_SB");
 
     dev = aml_device("NVDR");
@@ -1310,8 +1311,6 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
     aml_append(sb_scope, dev);
     aml_append(ssdt, sb_scope);
 
-    nvdimm_ssdt = table_data->len;
-
     /* copy AML table into ACPI tables blob and patch header there */
     g_array_append_vals(table_data, ssdt->buf->data, ssdt->buf->len);
     mem_addr_offset = build_append_named_dword(table_data,
@@ -1323,10 +1322,13 @@ static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
     bios_linker_loader_add_pointer(linker,
         ACPI_BUILD_TABLE_FILE, mem_addr_offset, sizeof(uint32_t),
         NVDIMM_DSM_MEM_FILE, 0);
-    build_header(linker, table_data,
-        (void *)(table_data->data + nvdimm_ssdt),
-                 "SSDT", table_data->len - nvdimm_ssdt, 1, oem_id, "NVDIMM");
     free_aml_allocator();
+    /*
+     * must be executed as the last so that pointer patching command above
+     * would be executed by guest before it recalculated checksum which were
+     * scheduled by acpi_table_end()
+     */
+    acpi_table_end(linker, &table);
 }
 
 void nvdimm_build_srat(GArray *table_data)
Signature · 1 line
2.27.0
#14 lore raw

PATCH v4 12/35 acpi: vmgenid_build_acpi: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v4:
* drop not related "vgia_offset = table_data->len" newline change (Reviewed-by: Eric Auger <[email protected]>)
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/acpi/vmgenid.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
hw/acpi/vmgenid.c +6 -7
index 4f41a13ea0..0c9f158ac9 100644
@@ -29,6 +29,8 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
     Aml *ssdt, *dev, *scope, *method, *addr, *if_ctx;
     uint32_t vgia_offset;
     QemuUUID guid_le;
+    AcpiTable table = { .sig = "SSDT", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = "VMGENID" };
 
     /* Fill in the GUID values.  These need to be converted to little-endian
      * first, since that's what the guest expects
@@ -42,12 +44,10 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
     g_array_insert_vals(guid, VMGENID_GUID_OFFSET, guid_le.data,
                         ARRAY_SIZE(guid_le.data));
 
-    /* Put this in a separate SSDT table */
+    /* Put VMGNEID into a separate SSDT table */
+    acpi_table_begin(&table, table_data);
     ssdt = init_aml_allocator();
 
-    /* Reserve space for header */
-    acpi_data_push(ssdt->buf, sizeof(AcpiTableHeader));
-
     /* Storage for the GUID address */
     vgia_offset = table_data->len +
         build_append_named_dword(ssdt->buf, "VGIA");
@@ -116,9 +116,8 @@ void vmgenid_build_acpi(VmGenIdState *vms, GArray *table_data, GArray *guid,
         ACPI_BUILD_TABLE_FILE, vgia_offset, sizeof(uint32_t),
         VMGENID_GUID_FW_CFG_FILE, 0);
 
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - ssdt->buf->len),
-        "SSDT", ssdt->buf->len, 1, oem_id, "VMGENID");
+    /* must be called after above command to ensure correct table checksum */
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 
Signature · 1 line
2.27.0
#15 lore raw

PATCH v4 13/35 acpi: x86: build_dsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-build.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/i386/acpi-build.c +4 -6
index dfaa47cdc2..7b54ab01c9 100644
@@ -1405,12 +1405,12 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
 #endif
     int i;
     VMBusBridge *vmbus_bridge = vmbus_bridge_find();
+    AcpiTable table = { .sig = "DSDT", .rev = 1, .oem_id = x86ms->oem_id,
+                        .oem_table_id = x86ms->oem_table_id };
 
+    acpi_table_begin(&table, table_data);
     dsdt = init_aml_allocator();
 
-    /* Reserve space for header */
-    acpi_data_push(dsdt->buf, sizeof(AcpiTableHeader));
-
     build_dbg_aml(dsdt);
     if (misc->is_piix4) {
         sb_scope = aml_scope("_SB");
@@ -1845,9 +1845,7 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
 
     /* copy AML table into ACPI tables blob and patch header there */
     g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - dsdt->buf->len),
-                 "DSDT", dsdt->buf->len, 1, x86ms->oem_id, x86ms->oem_table_id);
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 
Signature · 1 line
2.27.0
#16 lore raw

PATCH v4 14/35 acpi: build_hpet: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it convert build_hpet() to endian agnostic build_append_FOO() API

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 13 -------------
 hw/i386/acpi-build.c        | 26 ++++++++++++++++++--------
 2 files changed, 18 insertions(+), 21 deletions(-)
include/hw/acpi/acpi-defs.h +0 -13
index f6d2ca172b..4d8f8b34b0 100644
@@ -358,19 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * HPET Description Table
- */
-struct Acpi20Hpet {
-    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
-    uint32_t           timer_block_id;
-    struct AcpiGenericAddress addr;
-    uint8_t            hpet_number;
-    uint16_t           min_tick;
-    uint8_t            page_protect;
-} QEMU_PACKED;
-typedef struct Acpi20Hpet Acpi20Hpet;
-
 /*
  * SRAT (NUMA topology description) table
  */
hw/i386/acpi-build.c +18 -8
index 7b54ab01c9..1587fe5a20 100644
@@ -1849,22 +1849,32 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
     free_aml_allocator();
 }
 
+/*
+ * IA-PC HPET (High Precision Event Timers) Specification (Revision: 1.0a)
+ * 3.2.4The ACPI 2.0 HPET Description Table (HPET)
+ */
 static void
 build_hpet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
            const char *oem_table_id)
 {
-    Acpi20Hpet *hpet;
-    int hpet_start = table_data->len;
+    AcpiTable table = { .sig = "HPET", .rev = 1,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    hpet = acpi_data_push(table_data, sizeof(*hpet));
+    acpi_table_begin(&table, table_data);
     /* Note timer_block_id value must be kept in sync with value advertised by
      * emulated hpet
      */
-    hpet->timer_block_id = cpu_to_le32(0x8086a201);
-    hpet->addr.address = cpu_to_le64(HPET_BASE);
-    build_header(linker, table_data,
-                 (void *)(table_data->data + hpet_start),
-                 "HPET", sizeof(*hpet), 1, oem_id, oem_table_id);
+    /* Event Timer Block ID */
+    build_append_int_noprefix(table_data, 0x8086a201, 4);
+    /* BASE_ADDRESS */
+    build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 0, 0, 0, HPET_BASE);
+    /* HPET Number */
+    build_append_int_noprefix(table_data, 0, 1);
+    /* Main Counter Minimum Clock_tick in Periodic Mode */
+    build_append_int_noprefix(table_data, 0, 2);
+    /* Page Protection And OEM Attribute */
+    build_append_int_noprefix(table_data, 0, 1);
+    acpi_table_end(linker, &table);
 }
 
 #ifdef CONFIG_TPM
Signature · 1 line
2.27.0
#17 lore raw

PATCH v4 15/35 acpi: build_tpm_tcpa: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build table entries (which also removes some manual offset calculations).

---
v2:
* fix assert when starting QEMU with TPM 1.2
Stefan Berger <[email protected]>
v3:
* fix invalid checksum, by putting acpi_table_composed() after pointer patching
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 14 --------------
 hw/i386/acpi-build.c        | 38 ++++++++++++++++++++++---------------
 2 files changed, 23 insertions(+), 29 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index 4d8f8b34b0..3b42b138f0 100644
@@ -418,20 +418,6 @@ struct AcpiSratProcessorGiccAffinity {
 
 typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/*
- * TCPA Description Table
- *
- * Following Level 00, Rev 00.37 of specs:
- * http://www.trustedcomputinggroup.org/resources/tcg_acpi_specification
- */
-struct Acpi20Tcpa {
-    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
-    uint16_t platform_class;
-    uint32_t log_area_minimum_length;
-    uint64_t log_area_start_address;
-} QEMU_PACKED;
-typedef struct Acpi20Tcpa Acpi20Tcpa;
-
 /* DMAR - DMA Remapping table r2.2 */
 struct AcpiTableDmar {
     ACPI_TABLE_HEADER_DEF
hw/i386/acpi-build.c +23 -15
index 1587fe5a20..9fa6d7665b 100644
@@ -1878,31 +1878,39 @@ build_hpet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
 }
 
 #ifdef CONFIG_TPM
+/*
+ * TCPA Description Table
+ *
+ * Following Level 00, Rev 00.37 of specs:
+ * http://www.trustedcomputinggroup.org/resources/tcg_acpi_specification
+ * 7.1.2 ACPI Table Layout
+ */
 static void
 build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
                const char *oem_id, const char *oem_table_id)
 {
-    int tcpa_start = table_data->len;
-    Acpi20Tcpa *tcpa = acpi_data_push(table_data, sizeof *tcpa);
-    unsigned log_addr_size = sizeof(tcpa->log_area_start_address);
-    unsigned log_addr_offset =
-        (char *)&tcpa->log_area_start_address - table_data->data;
+    unsigned log_addr_offset;
+    AcpiTable table = { .sig = "TCPA", .rev = 2,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    tcpa->platform_class = cpu_to_le16(TPM_TCPA_ACPI_CLASS_CLIENT);
-    tcpa->log_area_minimum_length = cpu_to_le32(TPM_LOG_AREA_MINIMUM_SIZE);
-    acpi_data_push(tcpalog, le32_to_cpu(tcpa->log_area_minimum_length));
+    acpi_table_begin(&table, table_data);
+    /* Platform Class */
+    build_append_int_noprefix(table_data, TPM_TCPA_ACPI_CLASS_CLIENT, 2);
+    /* Log Area Minimum Length (LAML) */
+    build_append_int_noprefix(table_data, TPM_LOG_AREA_MINIMUM_SIZE, 4);
+    /* Log Area Start Address (LASA) */
+    log_addr_offset = table_data->len;
+    build_append_int_noprefix(table_data, 0, 8);
 
+    /* allocate/reserve space for TPM log area */
+    acpi_data_push(tcpalog, TPM_LOG_AREA_MINIMUM_SIZE);
     bios_linker_loader_alloc(linker, ACPI_BUILD_TPMLOG_FILE, tcpalog, 1,
                              false /* high memory */);
-
     /* log area start address to be filled by Guest linker */
-    bios_linker_loader_add_pointer(linker,
-        ACPI_BUILD_TABLE_FILE, log_addr_offset, log_addr_size,
-        ACPI_BUILD_TPMLOG_FILE, 0);
+    bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
+        log_addr_offset, 8, ACPI_BUILD_TPMLOG_FILE, 0);
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + tcpa_start),
-                 "TCPA", sizeof(*tcpa), 2, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 #endif
 
Signature · 1 line
2.27.0
Tested-by on v4 15/35
#18 lore raw

Re: [PATCH v4 15/35] acpi: build_tpm_tcpa: use acpi_table_begin()/acpi_table_end() instead of build_header()

Quoted 10 lines · Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build table entries (which also removes some manual offset calculations).

Quoted 99 lines

---
v2:
* fix assert when starting QEMU with TPM 1.2
Stefan Berger <[email protected]>
v3:
* fix invalid checksum, by putting acpi_table_composed() after pointer patching
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
  include/hw/acpi/acpi-defs.h | 14 --------------
  hw/i386/acpi-build.c        | 38 ++++++++++++++++++++++---------------
  2 files changed, 23 insertions(+), 29 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index 4d8f8b34b0..3b42b138f0 100644
@@ -418,20 +418,6 @@ struct AcpiSratProcessorGiccAffinity {
 
  typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
 
-/*
- * TCPA Description Table
- *
- * Following Level 00, Rev 00.37 of specs:
- * http://www.trustedcomputinggroup.org/resources/tcg_acpi_specification
- */
-struct Acpi20Tcpa {
-    ACPI_TABLE_HEADER_DEF                    /* ACPI common table header */
-    uint16_t platform_class;
-    uint32_t log_area_minimum_length;
-    uint64_t log_area_start_address;
-} QEMU_PACKED;
-typedef struct Acpi20Tcpa Acpi20Tcpa;
-
  /* DMAR - DMA Remapping table r2.2 */
  struct AcpiTableDmar {
      ACPI_TABLE_HEADER_DEF
hw/i386/acpi-build.c +23 -15
index 1587fe5a20..9fa6d7665b 100644
@@ -1878,31 +1878,39 @@ build_hpet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
  }
 
  #ifdef CONFIG_TPM
+/*
+ * TCPA Description Table
+ *
+ * Following Level 00, Rev 00.37 of specs:
+ * http://www.trustedcomputinggroup.org/resources/tcg_acpi_specification
+ * 7.1.2 ACPI Table Layout
+ */
  static void
  build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
                 const char *oem_id, const char *oem_table_id)
  {
-    int tcpa_start = table_data->len;
-    Acpi20Tcpa *tcpa = acpi_data_push(table_data, sizeof *tcpa);
-    unsigned log_addr_size = sizeof(tcpa->log_area_start_address);
-    unsigned log_addr_offset =
-        (char *)&tcpa->log_area_start_address - table_data->data;
+    unsigned log_addr_offset;
+    AcpiTable table = { .sig = "TCPA", .rev = 2,
+                        .oem_id = oem_id, .oem_table_id = oem_table_id };
 
-    tcpa->platform_class = cpu_to_le16(TPM_TCPA_ACPI_CLASS_CLIENT);
-    tcpa->log_area_minimum_length = cpu_to_le32(TPM_LOG_AREA_MINIMUM_SIZE);
-    acpi_data_push(tcpalog, le32_to_cpu(tcpa->log_area_minimum_length));
+    acpi_table_begin(&table, table_data);
+    /* Platform Class */
+    build_append_int_noprefix(table_data, TPM_TCPA_ACPI_CLASS_CLIENT, 2);
+    /* Log Area Minimum Length (LAML) */
+    build_append_int_noprefix(table_data, TPM_LOG_AREA_MINIMUM_SIZE, 4);
+    /* Log Area Start Address (LASA) */
+    log_addr_offset = table_data->len;
+    build_append_int_noprefix(table_data, 0, 8);
 
+    /* allocate/reserve space for TPM log area */
+    acpi_data_push(tcpalog, TPM_LOG_AREA_MINIMUM_SIZE);
      bios_linker_loader_alloc(linker, ACPI_BUILD_TPMLOG_FILE, tcpalog, 1,
                               false /* high memory */);
-
      /* log area start address to be filled by Guest linker */
-    bios_linker_loader_add_pointer(linker,
-        ACPI_BUILD_TABLE_FILE, log_addr_offset, log_addr_size,
-        ACPI_BUILD_TPMLOG_FILE, 0);
+    bios_linker_loader_add_pointer(linker, ACPI_BUILD_TABLE_FILE,
+        log_addr_offset, 8, ACPI_BUILD_TPMLOG_FILE, 0);
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + tcpa_start),
-                 "TCPA", sizeof(*tcpa), 2, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
  }
  #endif
 
#19 lore raw

PATCH v4 16/35 acpi: arm/x86: build_srat: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build table entries (which also removes some manual offset calculations)

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 11 -----------
 hw/arm/virt-acpi-build.c    | 15 +++++++--------
 hw/i386/acpi-build.c        | 18 +++++++-----------
 3 files changed, 14 insertions(+), 30 deletions(-)
include/hw/acpi/acpi-defs.h +0 -11
index 3b42b138f0..5826ee04b6 100644
@@ -358,17 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * SRAT (NUMA topology description) table
- */
-
-struct AcpiSystemResourceAffinityTable {
-    ACPI_TABLE_HEADER_DEF
-    uint32_t    reserved1;
-    uint32_t    reserved2[2];
-} QEMU_PACKED;
-typedef struct AcpiSystemResourceAffinityTable AcpiSystemResourceAffinityTable;
-
 #define ACPI_SRAT_PROCESSOR_APIC     0
 #define ACPI_SRAT_MEMORY             1
 #define ACPI_SRAT_PROCESSOR_x2APIC   2
hw/arm/virt-acpi-build.c +7 -8
index 037cc1fd82..21efe7fe34 100644
@@ -477,18 +477,19 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSystemResourceAffinityTable *srat;
     AcpiSratProcessorGiccAffinity *core;
     AcpiSratMemoryAffinity *numamem;
-    int i, srat_start;
+    int i;
     uint64_t mem_base;
     MachineClass *mc = MACHINE_GET_CLASS(vms);
     MachineState *ms = MACHINE(vms);
     const CPUArchIdList *cpu_list = mc->possible_cpu_arch_ids(ms);
+    AcpiTable table = { .sig = "SRAT", .rev = 3, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
-    srat_start = table_data->len;
-    srat = acpi_data_push(table_data, sizeof(*srat));
-    srat->reserved1 = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    build_append_int_noprefix(table_data, 1, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < cpu_list->len; ++i) {
         core = acpi_data_push(table_data, sizeof(*core));
@@ -522,9 +523,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }
 
-    build_header(linker, table_data, (void *)(table_data->data + srat_start),
-                 "SRAT", table_data->len - srat_start, 3, vms->oem_id,
-                 vms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* GTDT */
hw/i386/acpi-build.c +7 -11
index 9fa6d7665b..6f522c389a 100644
@@ -1920,11 +1920,10 @@ build_tpm_tcpa(GArray *table_data, BIOSLinker *linker, GArray *tcpalog,
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
 {
-    AcpiSystemResourceAffinityTable *srat;
     AcpiSratMemoryAffinity *numamem;
 
     int i;
-    int srat_start, numa_start, slots;
+    int numa_start, slots;
     uint64_t mem_len, mem_base, next_base;
     MachineClass *mc = MACHINE_GET_CLASS(machine);
     X86MachineState *x86ms = X86_MACHINE(machine);
@@ -1935,11 +1934,12 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
     ram_addr_t hotpluggable_address_space_size =
         object_property_get_int(OBJECT(pcms), PC_MACHINE_DEVMEM_REGION_SIZE,
                                 NULL);
+    AcpiTable table = { .sig = "SRAT", .rev = 1, .oem_id = x86ms->oem_id,
+                        .oem_table_id = x86ms->oem_table_id };
 
-    srat_start = table_data->len;
-
-    srat = acpi_data_push(table_data, sizeof *srat);
-    srat->reserved1 = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    build_append_int_noprefix(table_data, 1, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < apic_ids->len; i++) {
         int node_id = apic_ids->cpus[i].props.node_id;
@@ -2045,11 +2045,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, MachineState *machine)
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
     }
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + srat_start),
-                 "SRAT",
-                 table_data->len - srat_start, 1, x86ms->oem_id,
-                 x86ms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /*
Signature · 1 line
2.27.0
#20 lore raw

PATCH v4 17/35 acpi: use build_append_int_noprefix() API to compose SRAT table

In reply to Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building SRAT tables for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
v4:
* rebase on top of (4be8bfcb4d hw/i386/acpi-build: Fix a typo)
v3:
* rebase on top of (e77af21a7a2 hw/i386/acpi-build: Get NUMA information from struct NumaState)

---
 include/hw/acpi/acpi-defs.h | 49 -----------------------
 include/hw/acpi/aml-build.h |  2 +-
 hw/acpi/aml-build.c         | 24 ++++++++----
 hw/acpi/nvdimm.c            |  4 +-
 hw/arm/virt-acpi-build.c    | 29 ++++++++------
 hw/i386/acpi-build.c        | 78 +++++++++++++++++++++----------------
 6 files changed, 80 insertions(+), 106 deletions(-)
include/hw/acpi/acpi-defs.h +0 -49
index 5826ee04b6..d293304f9c 100644
@@ -358,55 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-#define ACPI_SRAT_PROCESSOR_APIC     0
-#define ACPI_SRAT_MEMORY             1
-#define ACPI_SRAT_PROCESSOR_x2APIC   2
-#define ACPI_SRAT_PROCESSOR_GICC     3
-
-struct AcpiSratProcessorAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint8_t     proximity_lo;
-    uint8_t     local_apic_id;
-    uint32_t    flags;
-    uint8_t     local_sapic_eid;
-    uint8_t     proximity_hi[3];
-    uint32_t    reserved;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorAffinity AcpiSratProcessorAffinity;
-
-struct AcpiSratProcessorX2ApicAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint16_t    reserved;
-    uint32_t    proximity_domain;
-    uint32_t    x2apic_id;
-    uint32_t    flags;
-    uint32_t    clk_domain;
-    uint32_t    reserved2;
-} QEMU_PACKED;
-typedef struct AcpiSratProcessorX2ApicAffinity AcpiSratProcessorX2ApicAffinity;
-
-struct AcpiSratMemoryAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint16_t    reserved1;
-    uint64_t    base_addr;
-    uint64_t    range_length;
-    uint32_t    reserved2;
-    uint32_t    flags;
-    uint32_t    reserved3[2];
-} QEMU_PACKED;
-typedef struct AcpiSratMemoryAffinity AcpiSratMemoryAffinity;
-
-struct AcpiSratProcessorGiccAffinity {
-    ACPI_SUB_HEADER_DEF
-    uint32_t    proximity;
-    uint32_t    acpi_processor_uid;
-    uint32_t    flags;
-    uint32_t    clock_domain;
-} QEMU_PACKED;
-
-typedef struct AcpiSratProcessorGiccAffinity AcpiSratProcessorGiccAffinity;
-
 /* DMAR - DMA Remapping table r2.2 */
 struct AcpiTableDmar {
     ACPI_TABLE_HEADER_DEF
include/hw/acpi/aml-build.h +1 -1
index 4242382399..6e1f42e119 100644
@@ -487,7 +487,7 @@ Aml *build_crs(PCIHostState *host, CrsRangeSet *range_set, uint32_t io_offset,
                uint32_t mmio32_offset, uint64_t mmio64_offset,
                uint16_t bus_nr_offset);
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags);
 
 void build_slit(GArray *table_data, BIOSLinker *linker, MachineState *ms,
hw/acpi/aml-build.c +17 -7
index 23cda45ee0..c0f339847a 100644
@@ -1940,15 +1940,25 @@ build_xsdt(GArray *table_data, BIOSLinker *linker, GArray *table_offsets,
     acpi_table_end(linker, &table);
 }
 
-void build_srat_memory(AcpiSratMemoryAffinity *numamem, uint64_t base,
+/*
+ * ACPI spec, Revision 4.0
+ * 5.2.16.2 Memory Affinity Structure
+ */
+void build_srat_memory(GArray *table_data, uint64_t base,
                        uint64_t len, int node, MemoryAffinityFlags flags)
 {
-    numamem->type = ACPI_SRAT_MEMORY;
-    numamem->length = sizeof(*numamem);
-    numamem->proximity = cpu_to_le32(node);
-    numamem->flags = cpu_to_le32(flags);
-    numamem->base_addr = cpu_to_le64(base);
-    numamem->range_length = cpu_to_le64(len);
+    build_append_int_noprefix(table_data, 1, 1); /* Type */
+    build_append_int_noprefix(table_data, 40, 1); /* Length */
+    build_append_int_noprefix(table_data, node, 4); /* Proximity Domain */
+    build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+    build_append_int_noprefix(table_data, base, 4); /* Base Address Low */
+    /* Base Address High */
+    build_append_int_noprefix(table_data, base >> 32, 4);
+    build_append_int_noprefix(table_data, len, 4); /* Length Low */
+    build_append_int_noprefix(table_data, len >> 32, 4); /* Length High */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    build_append_int_noprefix(table_data, flags, 4); /* Flags */
+    build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 }
 
 /*
hw/acpi/nvdimm.c +1 -3
index a7539cfe89..5f9b552d6a 100644
@@ -1336,7 +1336,6 @@ void nvdimm_build_srat(GArray *table_data)
     GSList *device_list = nvdimm_get_device_list();
 
     for (; device_list; device_list = device_list->next) {
-        AcpiSratMemoryAffinity *numamem = NULL;
         DeviceState *dev = device_list->data;
         Object *obj = OBJECT(dev);
         uint64_t addr, size;
@@ -1346,8 +1345,7 @@ void nvdimm_build_srat(GArray *table_data)
         addr = object_property_get_uint(obj, PC_DIMM_ADDR_PROP, &error_abort);
         size = object_property_get_uint(obj, PC_DIMM_SIZE_PROP, &error_abort);
 
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, addr, size, node,
+        build_srat_memory(table_data, addr, size, node,
                           MEM_AFFINITY_ENABLED | MEM_AFFINITY_NON_VOLATILE);
     }
     g_slist_free(device_list);
hw/arm/virt-acpi-build.c +17 -12
index 21efe7fe34..6ba02cf281 100644
@@ -474,11 +474,13 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  vms->oem_table_id);
 }
 
+/*
+ * ACPI spec, Revision 5.1
+ * 5.2.16 System Resource Affinity Table (SRAT)
+ */
 static void
 build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSratProcessorGiccAffinity *core;
-    AcpiSratMemoryAffinity *numamem;
     int i;
     uint64_t mem_base;
     MachineClass *mc = MACHINE_GET_CLASS(vms);
@@ -492,19 +494,23 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     build_append_int_noprefix(table_data, 0, 8); /* Reserved */
 
     for (i = 0; i < cpu_list->len; ++i) {
-        core = acpi_data_push(table_data, sizeof(*core));
-        core->type = ACPI_SRAT_PROCESSOR_GICC;
-        core->length = sizeof(*core);
-        core->proximity = cpu_to_le32(cpu_list->cpus[i].props.node_id);
-        core->acpi_processor_uid = cpu_to_le32(i);
-        core->flags = cpu_to_le32(1);
+        uint32_t nodeid = cpu_list->cpus[i].props.node_id;
+        /*
+         * 5.2.16.4 GICC Affinity Structure
+         */
+        build_append_int_noprefix(table_data, 3, 1);      /* Type */
+        build_append_int_noprefix(table_data, 18, 1);     /* Length */
+        build_append_int_noprefix(table_data, nodeid, 4); /* Proximity Domain */
+        build_append_int_noprefix(table_data, i, 4); /* ACPI Processor UID */
+        /* Flags, Table 5-76 */
+        build_append_int_noprefix(table_data, 1 /* Enabled */, 4);
+        build_append_int_noprefix(table_data, 0, 4); /* Clock Domain */
     }
 
     mem_base = vms->memmap[VIRT_MEM].base;
     for (i = 0; i < ms->numa_state->num_nodes; ++i) {
         if (ms->numa_state->nodes[i].node_mem > 0) {
-            numamem = acpi_data_push(table_data, sizeof(*numamem));
-            build_srat_memory(numamem, mem_base,
+            build_srat_memory(table_data, mem_base,
                               ms->numa_state->nodes[i].node_mem, i,
                               MEM_AFFINITY_ENABLED);
             mem_base += ms->numa_state->nodes[i].node_mem;
@@ -516,8 +522,7 @@ build_srat(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     }
 
     if (ms->device_memory) {
-        numamem = acpi_data_push(table_data, sizeof *numamem);
-        build_srat_memory(numamem, ms->device_memory->base,
+        build_srat_memory(table_data, ms->device_memory->base,
                           memory_region_size(&ms->device_memory->mr),
                           ms->numa_state->num_nodes - 1,
                           MEM_AFFINITY_HOTPLUGGABLE | MEM_AFFINITY_ENABLED);
hw/i386/acpi-build.c +44 -34

133 lines not on this page · raw message

Signature · 1 line
2.27.0
#21 lore raw

PATCH v4 18/35 acpi: build_dmar_q35: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

While at it switch to build_append_int_noprefix() to build table entries tables.

---
v4:
* drop unrelated assert(iommu) move
(Reviewed-by: Eric Auger <[email protected]>)
v3:
- rebase on top 26863366b29 (hw/i386/acpi-build: Add DMAR support to bypass iommu)
- s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 68 -----------------------------
 hw/i386/acpi-build.c        | 87 ++++++++++++++++++++-----------------
 2 files changed, 48 insertions(+), 107 deletions(-)
include/hw/acpi/acpi-defs.h +0 -68
index d293304f9c..c4f0a202e8 100644
@@ -358,74 +358,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/* DMAR - DMA Remapping table r2.2 */
-struct AcpiTableDmar {
-    ACPI_TABLE_HEADER_DEF
-    uint8_t host_address_width; /* Maximum DMA physical addressability */
-    uint8_t flags;
-    uint8_t reserved[10];
-} QEMU_PACKED;
-typedef struct AcpiTableDmar AcpiTableDmar;
-
-/* Masks for Flags field above */
-#define ACPI_DMAR_INTR_REMAP        1
-#define ACPI_DMAR_X2APIC_OPT_OUT    (1 << 1)
-
-/* Values for sub-structure type for DMAR */
-enum {
-    ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,       /* DRHD */
-    ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,     /* RMRR */
-    ACPI_DMAR_TYPE_ATSR = 2,                /* ATSR */
-    ACPI_DMAR_TYPE_HARDWARE_AFFINITY = 3,   /* RHSR */
-    ACPI_DMAR_TYPE_ANDD = 4,                /* ANDD */
-    ACPI_DMAR_TYPE_RESERVED = 5             /* Reserved for furture use */
-};
-
-/*
- * Sub-structures for DMAR
- */
-
-/* Device scope structure for DRHD. */
-struct AcpiDmarDeviceScope {
-    uint8_t entry_type;
-    uint8_t length;
-    uint16_t reserved;
-    uint8_t enumeration_id;
-    uint8_t bus;
-    struct {
-        uint8_t device;
-        uint8_t function;
-    } path[];
-} QEMU_PACKED;
-typedef struct AcpiDmarDeviceScope AcpiDmarDeviceScope;
-
-/* Type 0: Hardware Unit Definition */
-struct AcpiDmarHardwareUnit {
-    uint16_t type;
-    uint16_t length;
-    uint8_t flags;
-    uint8_t reserved;
-    uint16_t pci_segment;   /* The PCI Segment associated with this unit */
-    uint64_t address;   /* Base address of remapping hardware register-set */
-    AcpiDmarDeviceScope scope[];
-} QEMU_PACKED;
-typedef struct AcpiDmarHardwareUnit AcpiDmarHardwareUnit;
-
-/* Type 2: Root Port ATS Capability Reporting Structure */
-struct AcpiDmarRootPortATS {
-    uint16_t type;
-    uint16_t length;
-    uint8_t flags;
-    uint8_t reserved;
-    uint16_t pci_segment;
-    AcpiDmarDeviceScope scope[];
-} QEMU_PACKED;
-typedef struct AcpiDmarRootPortATS AcpiDmarRootPortATS;
-
-/* Masks for Flags field above */
-#define ACPI_DMAR_INCLUDE_PCI_ALL   1
-#define ACPI_DMAR_ATSR_ALL_PORTS    1
-
 /*
  * Input Output Remapping Table (IORT)
  * Conforms to "IO Remapping Table System Software on ARM Platforms",
hw/i386/acpi-build.c +48 -39

133 lines not on this page · raw message

Signature · 1 line
2.27.0
#22 lore raw

PATCH v4 19/35 acpi: build_waet: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-build.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)
hw/i386/acpi-build.c +4 -6
index dab20ef7f7..015260e527 100644
@@ -2201,10 +2201,10 @@ static void
 build_waet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
            const char *oem_table_id)
 {
-    int waet_start = table_data->len;
+    AcpiTable table = { .sig = "WAET", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
 
-    /* WAET header */
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
     /*
      * Set "ACPI PM timer good" flag.
      *
@@ -2213,9 +2213,7 @@ build_waet(GArray *table_data, BIOSLinker *linker, const char *oem_id,
      * Which avoids costly VMExits caused by guest re-reading it unnecessarily.
      */
     build_append_int_noprefix(table_data, 1 << 1 /* ACPI PM timer good */, 4);
-
-    build_header(linker, table_data, (void *)(table_data->data + waet_start),
-                 "WAET", table_data->len - waet_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /*
Signature · 1 line
2.27.0
#23 lore raw

PATCH v4 20/35 acpi: build_amd_iommu: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-build.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
hw/i386/acpi-build.c +4 -7
index 015260e527..fde48a7377 100644
@@ -2319,12 +2319,12 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker, const char *oem_id,
                 const char *oem_table_id)
 {
     int ivhd_table_len = 24;
-    int iommu_start = table_data->len;
     AMDVIState *s = AMD_IOMMU_DEVICE(x86_iommu_get_default());
     GArray *ivhd_blob = g_array_new(false, true, 1);
+    AcpiTable table = { .sig = "IVRS", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
 
-    /* IVRS header */
-    acpi_data_push(table_data, sizeof(AcpiTableHeader));
+    acpi_table_begin(&table, table_data);
     /* IVinfo - IO virtualization information common to all
      * IOMMU units in a system
      */
@@ -2409,10 +2409,7 @@ build_amd_iommu(GArray *table_data, BIOSLinker *linker, const char *oem_id,
                                  0x48,                      /* special device */
                                  8);
     }
-
-    build_header(linker, table_data, (void *)(table_data->data + iommu_start),
-                 "IVRS", table_data->len - iommu_start, 1, oem_id,
-                 oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 typedef
Signature · 1 line
2.27.0
#24 lore raw

PATCH v4 21/35 acpi: madt: arm/x86: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h |  9 ---------
 hw/arm/virt-acpi-build.c    | 19 +++++++++++--------
 hw/i386/acpi-common.c       | 19 +++++++++++--------
 3 files changed, 22 insertions(+), 25 deletions(-)
include/hw/acpi/acpi-defs.h +0 -9
index c4f0a202e8..c7fa5caa06 100644
@@ -176,15 +176,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 #define ACPI_DUAL_PIC                0
 #define ACPI_MULTIPLE_APIC           1
 
-/* Master MADT */
-
-struct AcpiMultipleApicTable {
-    ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
-    uint32_t local_apic_address;     /* Physical address of local APIC */
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMultipleApicTable AcpiMultipleApicTable;
-
 /* Values for Type in APIC sub-headers */
 
 #define ACPI_APIC_PROCESSOR          0
hw/arm/virt-acpi-build.c +11 -8
index 6ba02cf281..e3bdcd44e8 100644
@@ -567,19 +567,26 @@ build_gtdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
                  vms->oem_table_id);
 }
 
-/* MADT */
+/*
+ * ACPI spec, Revision 5.0
+ * 5.2.12 Multiple APIC Description Table (MADT)
+ */
 static void
 build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
     VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(vms);
-    int madt_start = table_data->len;
     const MemMapEntry *memmap = vms->memmap;
     const int *irqmap = vms->irqmap;
     AcpiMadtGenericDistributor *gicd;
     AcpiMadtGenericMsiFrame *gic_msi;
     int i;
+    AcpiTable table = { .sig = "APIC", .rev = 3, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
-    acpi_data_push(table_data, sizeof(AcpiMultipleApicTable));
+    acpi_table_begin(&table, table_data);
+    /* Local Interrupt Controller Address */
+    build_append_int_noprefix(table_data, 0, 4);
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
 
     gicd = acpi_data_push(table_data, sizeof *gicd);
     gicd->type = ACPI_APIC_GENERIC_DISTRIBUTOR;
@@ -650,11 +657,7 @@ build_madt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         gic_msi->spi_count = cpu_to_le16(NUM_GICV2M_SPIS);
         gic_msi->spi_base = cpu_to_le16(irqmap[VIRT_GIC_V2M] + ARM_SPI_BASE);
     }
-
-    build_header(linker, table_data,
-                 (void *)(table_data->data + madt_start), "APIC",
-                 table_data->len - madt_start, 3, vms->oem_id,
-                 vms->oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
 /* FADT */
hw/i386/acpi-common.c +11 -8
index 1f5947fcf9..a0cde1d874 100644
@@ -71,24 +71,29 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
     }
 }
 
+/*
+ * ACPI spec, Revision 1.0b
+ * 5.2.8 Multiple APIC Description Table
+ */
 void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
                      X86MachineState *x86ms, AcpiDeviceIf *adev,
                      const char *oem_id, const char *oem_table_id)
 {
     MachineClass *mc = MACHINE_GET_CLASS(x86ms);
     const CPUArchIdList *apic_ids = mc->possible_cpu_arch_ids(MACHINE(x86ms));
-    int madt_start = table_data->len;
     AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(adev);
     bool x2apic_mode = false;
 
-    AcpiMultipleApicTable *madt;
     AcpiMadtIoApic *io_apic;
     AcpiMadtIntsrcovr *intsrcovr;
     int i;
+    AcpiTable table = { .sig = "APIC", .rev = 1, .oem_id = oem_id,
+                        .oem_table_id = oem_table_id };
 
-    madt = acpi_data_push(table_data, sizeof *madt);
-    madt->local_apic_address = cpu_to_le32(APIC_DEFAULT_ADDRESS);
-    madt->flags = cpu_to_le32(1);
+    acpi_table_begin(&table, table_data);
+    /* Local APIC Address */
+    build_append_int_noprefix(table_data, APIC_DEFAULT_ADDRESS, 4);
+    build_append_int_noprefix(table_data, 1 /* PCAT_COMPAT */, 4); /* Flags */
 
     for (i = 0; i < apic_ids->len; i++) {
         adevc->madt_cpu(adev, i, apic_ids, table_data);
@@ -156,8 +161,6 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
         local_nmi->lint         = 1; /* ACPI_LINT1 */
     }
 
-    build_header(linker, table_data,
-                 (void *)(table_data->data + madt_start), "APIC",
-                 table_data->len - madt_start, 1, oem_id, oem_table_id);
+    acpi_table_end(linker, &table);
 }
 
Signature · 1 line
2.27.0
#25 lore raw

PATCH v4 22/35 acpi: x86: remove dead code

In reply to Igor Mammedov
---
 include/hw/acpi/acpi-defs.h | 13 -------------
 1 file changed, 13 deletions(-)
include/hw/acpi/acpi-defs.h +0 -13
index c7fa5caa06..af4fa412a5 100644
@@ -163,19 +163,6 @@ struct AcpiFacsDescriptorRev1 {
 } QEMU_PACKED;
 typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
-/*
- * Differentiated System Description Table (DSDT)
- */
-
-/*
- * MADT values and structures
- */
-
-/* Values for MADT PCATCompat */
-
-#define ACPI_DUAL_PIC                0
-#define ACPI_MULTIPLE_APIC           1
-
 /* Values for Type in APIC sub-headers */
 
 #define ACPI_APIC_PROCESSOR          0
Signature · 1 line
2.27.0
#26 lore raw

PATCH v4 23/35 acpi: x86: set enabled when composing _MAT entries

In reply to Igor Mammedov

Instead of composing disabled _MAT entry and then later on patching it to enabled for hotpluggbale CPUs in DSDT, set it to enabled at the time _MAT entry is built.

It will allow to drop usage of packed structures in following patches when build_madt() is switched to use build_append_int_noprefix() API.

---
CC: [email protected]

---
 include/hw/acpi/acpi_dev_interface.h |  3 ++-
 include/hw/i386/pc.h                 |  6 +++---
 hw/acpi/acpi-x86-stub.c              |  3 ++-
 hw/acpi/cpu.c                        | 17 ++---------------
 hw/i386/acpi-common.c                | 18 ++++++------------
 5 files changed, 15 insertions(+), 32 deletions(-)
include/hw/acpi/acpi_dev_interface.h +2 -1
index 769ff55c7e..ea6056ab92 100644
@@ -53,6 +53,7 @@ struct AcpiDeviceIfClass {
     void (*ospm_status)(AcpiDeviceIf *adev, ACPIOSTInfoList ***list);
     void (*send_event)(AcpiDeviceIf *adev, AcpiEventStatusBits ev);
     void (*madt_cpu)(AcpiDeviceIf *adev, int uid,
-                     const CPUArchIdList *apic_ids, GArray *entry);
+                     const CPUArchIdList *apic_ids, GArray *entry,
+                     bool force_enabled);
 };
 #endif
include/hw/i386/pc.h +3 -3
index 4d2e35a152..82cf7b7e30 100644
@@ -187,10 +187,10 @@ bool pc_system_ovmf_table_find(const char *entry, uint8_t **data,
                                int *data_len);
 void pc_system_parse_ovmf_flash(uint8_t *flash_ptr, size_t flash_size);
 
-
-/* acpi-build.c */
+/* hw/i386/acpi-common.c */
 void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
-                       const CPUArchIdList *apic_ids, GArray *entry);
+                       const CPUArchIdList *apic_ids, GArray *entry,
+                       bool force_enabled);
 
 extern GlobalProperty pc_compat_6_1[];
 extern const size_t pc_compat_6_1_len;
hw/acpi/acpi-x86-stub.c +2 -1
index e9e46c5c5f..3df1e090f4 100644
@@ -3,7 +3,8 @@
 #include "hw/i386/acpi-build.h"
 
 void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
-                       const CPUArchIdList *apic_ids, GArray *entry)
+                       const CPUArchIdList *apic_ids, GArray *entry,
+                       bool force_enabled)
 {
 }
 
hw/acpi/cpu.c +2 -15
index f82e9512fd..b20903ea30 100644
@@ -669,21 +669,8 @@ void build_cpus_aml(Aml *table, MachineState *machine, CPUHotplugFeatures opts,
 
             /* build _MAT object */
             assert(adevc && adevc->madt_cpu);
-            adevc->madt_cpu(adev, i, arch_ids, madt_buf);
-            switch (madt_buf->data[0]) {
-            case ACPI_APIC_PROCESSOR: {
-                AcpiMadtProcessorApic *apic = (void *)madt_buf->data;
-                apic->flags = cpu_to_le32(1);
-                break;
-            }
-            case ACPI_APIC_LOCAL_X2APIC: {
-                AcpiMadtProcessorX2Apic *apic = (void *)madt_buf->data;
-                apic->flags = cpu_to_le32(1);
-                break;
-            }
-            default:
-                assert(0);
-            }
+            adevc->madt_cpu(adev, i, arch_ids, madt_buf,
+                            true); /* set enabled flag */
             aml_append(dev, aml_name_decl("_MAT",
                 aml_buffer(madt_buf->len, (uint8_t *)madt_buf->data)));
             g_array_free(madt_buf, true);
hw/i386/acpi-common.c +6 -12
index a0cde1d874..7983a13a93 100644
@@ -34,9 +34,11 @@
 #include "acpi-common.h"
 
 void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
-                       const CPUArchIdList *apic_ids, GArray *entry)
+                       const CPUArchIdList *apic_ids, GArray *entry,
+                       bool force_enabled)
 {
     uint32_t apic_id = apic_ids->cpus[uid].arch_id;
+    uint32_t flags = apic_ids->cpus[uid].cpu != NULL || force_enabled ? 1 : 0;
 
     /* ACPI spec says that LAPIC entry for non present
      * CPU may be omitted from MADT or it must be marked
@@ -51,11 +53,7 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
         apic->length = sizeof(*apic);
         apic->processor_id = uid;
         apic->local_apic_id = apic_id;
-        if (apic_ids->cpus[uid].cpu != NULL) {
-            apic->flags = cpu_to_le32(1);
-        } else {
-            apic->flags = cpu_to_le32(0);
-        }
+        apic->flags = cpu_to_le32(flags);
     } else {
         AcpiMadtProcessorX2Apic *apic = acpi_data_push(entry, sizeof *apic);
 
@@ -63,11 +61,7 @@ void pc_madt_cpu_entry(AcpiDeviceIf *adev, int uid,
         apic->length = sizeof(*apic);
         apic->uid = cpu_to_le32(uid);
         apic->x2apic_id = cpu_to_le32(apic_id);
-        if (apic_ids->cpus[uid].cpu != NULL) {
-            apic->flags = cpu_to_le32(1);
-        } else {
-            apic->flags = cpu_to_le32(0);
-        }
+        apic->flags = cpu_to_le32(flags);
     }
 }
 
@@ -96,7 +90,7 @@ void acpi_build_madt(GArray *table_data, BIOSLinker *linker,
     build_append_int_noprefix(table_data, 1 /* PCAT_COMPAT */, 4); /* Flags */
 
     for (i = 0; i < apic_ids->len; i++) {
-        adevc->madt_cpu(adev, i, apic_ids, table_data);
+        adevc->madt_cpu(adev, i, apic_ids, table_data, false);
         if (apic_ids->cpus[i].arch_id > 254) {
             x2apic_mode = true;
         }
Signature · 1 line
2.27.0
#27 lore raw

PATCH v4 24/35 acpi: x86: madt: use build_append_int_noprefix() API to compose MADT table

In reply to Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building MADT table for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
v4:
* fixup doc comments
(Eric Auger <[email protected]>)

---
 include/hw/acpi/acpi-defs.h |  64 ------------------
 hw/i386/acpi-common.c       | 129 +++++++++++++++++++-----------------
 2 files changed, 67 insertions(+), 126 deletions(-)
include/hw/acpi/acpi-defs.h +0 -64
index af4fa412a5..3f174ba208 100644
@@ -165,17 +165,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Values for Type in APIC sub-headers */
 
-#define ACPI_APIC_PROCESSOR          0
-#define ACPI_APIC_IO                 1
-#define ACPI_APIC_XRUPT_OVERRIDE     2
-#define ACPI_APIC_NMI                3
-#define ACPI_APIC_LOCAL_NMI          4
-#define ACPI_APIC_ADDRESS_OVERRIDE   5
-#define ACPI_APIC_IO_SAPIC           6
-#define ACPI_APIC_LOCAL_SAPIC        7
-#define ACPI_APIC_XRUPT_SOURCE       8
-#define ACPI_APIC_LOCAL_X2APIC       9
-#define ACPI_APIC_LOCAL_X2APIC_NMI      10
 #define ACPI_APIC_GENERIC_CPU_INTERFACE 11
 #define ACPI_APIC_GENERIC_DISTRIBUTOR   12
 #define ACPI_APIC_GENERIC_MSI_FRAME     13
@@ -192,59 +181,6 @@ typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
 /* Sub-structures for MADT */
 
-struct AcpiMadtProcessorApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint8_t  local_apic_id;          /* Processor's local APIC id */
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorApic AcpiMadtProcessorApic;
-
-struct AcpiMadtIoApic {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  io_apic_id;             /* I/O APIC ID */
-    uint8_t  reserved;               /* Reserved - must be zero */
-    uint32_t address;                /* APIC physical address */
-    uint32_t interrupt;              /* Global system interrupt where INTI
-                                 * lines start */
-} QEMU_PACKED;
-typedef struct AcpiMadtIoApic AcpiMadtIoApic;
-
-struct AcpiMadtIntsrcovr {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  bus;
-    uint8_t  source;
-    uint32_t gsi;
-    uint16_t flags;
-} QEMU_PACKED;
-typedef struct AcpiMadtIntsrcovr AcpiMadtIntsrcovr;
-
-struct AcpiMadtLocalNmi {
-    ACPI_SUB_HEADER_DEF
-    uint8_t  processor_id;           /* ACPI processor id */
-    uint16_t flags;                  /* MPS INTI flags */
-    uint8_t  lint;                   /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalNmi AcpiMadtLocalNmi;
-
-struct AcpiMadtProcessorX2Apic {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t x2apic_id;              /* Processor's local x2APIC ID */
-    uint32_t flags;
-    uint32_t uid;                    /* Processor object _UID */
-} QEMU_PACKED;
-typedef struct AcpiMadtProcessorX2Apic AcpiMadtProcessorX2Apic;
-
-struct AcpiMadtLocalX2ApicNmi {
-    ACPI_SUB_HEADER_DEF
-    uint16_t flags;                  /* MPS INTI flags */
-    uint32_t uid;                    /* Processor object _UID */
-    uint8_t  lint;                   /* Local APIC LINT# */
-    uint8_t  reserved[3];            /* Local APIC LINT# */
-} QEMU_PACKED;
-typedef struct AcpiMadtLocalX2ApicNmi AcpiMadtLocalX2ApicNmi;
-
 struct AcpiMadtGenericCpuInterface {
     ACPI_SUB_HEADER_DEF
     uint16_t reserved;
hw/i386/acpi-common.c +67 -62

174 lines not on this page · raw message

Signature · 1 line
2.27.0
#28 lore raw

PATCH v4 25/35 acpi: arm/virt: madt: use build_append_int_noprefix() API to compose MADT table

In reply to Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building MADT table for arm/x86 and use endian agnostic build_append_int_noprefix() API to build it.

---
v2:
* fix invalid ITS length (use v6.0 Errata instead of v60 definition)

---
 include/hw/acpi/acpi-defs.h |  84 --------------------
 hw/arm/virt-acpi-build.c    | 150 +++++++++++++++++++++---------------
 2 files changed, 90 insertions(+), 144 deletions(-)
include/hw/acpi/acpi-defs.h +0 -84
index 3f174ba208..bcada37601 100644
@@ -163,90 +163,6 @@ struct AcpiFacsDescriptorRev1 {
 } QEMU_PACKED;
 typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
-/* Values for Type in APIC sub-headers */
-
-#define ACPI_APIC_GENERIC_CPU_INTERFACE 11
-#define ACPI_APIC_GENERIC_DISTRIBUTOR   12
-#define ACPI_APIC_GENERIC_MSI_FRAME     13
-#define ACPI_APIC_GENERIC_REDISTRIBUTOR 14
-#define ACPI_APIC_GENERIC_TRANSLATOR    15
-#define ACPI_APIC_RESERVED              16   /* 16 and greater are reserved */
-
-/*
- * MADT sub-structures (Follow MULTIPLE_APIC_DESCRIPTION_TABLE)
- */
-#define ACPI_SUB_HEADER_DEF   /* Common ACPI sub-structure header */\
-    uint8_t  type;                               \
-    uint8_t  length;
-
-/* Sub-structures for MADT */
-
-struct AcpiMadtGenericCpuInterface {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t cpu_interface_number;
-    uint32_t uid;
-    uint32_t flags;
-    uint32_t parking_version;
-    uint32_t performance_interrupt;
-    uint64_t parked_address;
-    uint64_t base_address;
-    uint64_t gicv_base_address;
-    uint64_t gich_base_address;
-    uint32_t vgic_interrupt;
-    uint64_t gicr_base_address;
-    uint64_t arm_mpidr;
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericCpuInterface AcpiMadtGenericCpuInterface;
-
-/* GICC CPU Interface Flags */
-#define ACPI_MADT_GICC_ENABLED 1
-
-struct AcpiMadtGenericDistributor {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t gic_id;
-    uint64_t base_address;
-    uint32_t global_irq_base;
-    /* ACPI 5.1 Errata 1228 Present GIC version in MADT table */
-    uint8_t version;
-    uint8_t reserved2[3];
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericDistributor AcpiMadtGenericDistributor;
-
-struct AcpiMadtGenericMsiFrame {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t gic_msi_frame_id;
-    uint64_t base_address;
-    uint32_t flags;
-    uint16_t spi_count;
-    uint16_t spi_base;
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericMsiFrame AcpiMadtGenericMsiFrame;
-
-struct AcpiMadtGenericRedistributor {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint64_t base_address;
-    uint32_t range_length;
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericRedistributor AcpiMadtGenericRedistributor;
-
-struct AcpiMadtGenericTranslator {
-    ACPI_SUB_HEADER_DEF
-    uint16_t reserved;
-    uint32_t translation_id;
-    uint64_t base_address;
-    uint32_t reserved2;
-} QEMU_PACKED;
-
-typedef struct AcpiMadtGenericTranslator AcpiMadtGenericTranslator;
-
 /*
  * Generic Timer Description Table (GTDT)
  */
hw/arm/virt-acpi-build.c +90 -60

184 lines not on this page · raw message

Signature · 1 line
2.27.0
#29 lore raw

PATCH v4 26/35 acpi: build_dsdt_microvm: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/i386/acpi-microvm.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
hw/i386/acpi-microvm.c +6 -7
index 1a0f77b911..196d318499 100644
@@ -113,16 +113,16 @@ build_dsdt_microvm(GArray *table_data, BIOSLinker *linker,
     Aml *dsdt, *sb_scope, *scope, *pkg;
     bool ambiguous;
     Object *isabus;
+    AcpiTable table = { .sig = "DSDT", .rev = 2, .oem_id = x86ms->oem_id,
+                        .oem_table_id = x86ms->oem_table_id };
 
     isabus = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
     assert(isabus);
     assert(!ambiguous);
 
+    acpi_table_begin(&table, table_data);
     dsdt = init_aml_allocator();
 
-    /* Reserve space for header */
-    acpi_data_push(dsdt->buf, sizeof(AcpiTableHeader));
-
     sb_scope = aml_scope("_SB");
     fw_cfg_add_acpi_dsdt(sb_scope, x86ms->fw_cfg);
     isa_build_aml(ISA_BUS(isabus), sb_scope);
@@ -144,11 +144,10 @@ build_dsdt_microvm(GArray *table_data, BIOSLinker *linker,
     aml_append(scope, aml_name_decl("_S5", pkg));
     aml_append(dsdt, scope);
 
-    /* copy AML table into ACPI tables blob and patch header there */
+    /* copy AML bytecode into ACPI tables blob */
     g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - dsdt->buf->len),
-                 "DSDT", dsdt->buf->len, 2, x86ms->oem_id, x86ms->oem_table_id);
+
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 
Signature · 1 line
2.27.0
#30 lore raw

PATCH v4 27/35 acpi: arm: virt: build_dsdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 hw/arm/virt-acpi-build.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
hw/arm/virt-acpi-build.c +6 -7
index a9a78d904a..4b9687439d 100644
@@ -729,10 +729,11 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
     MachineState *ms = MACHINE(vms);
     const MemMapEntry *memmap = vms->memmap;
     const int *irqmap = vms->irqmap;
+    AcpiTable table = { .sig = "DSDT", .rev = 2, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
+    acpi_table_begin(&table, table_data);
     dsdt = init_aml_allocator();
-    /* Reserve space for header */
-    acpi_data_push(dsdt->buf, sizeof(AcpiTableHeader));
 
     /* When booting the VM with UEFI, UEFI takes ownership of the RTC hardware.
      * While UEFI can use libfdt to disable the RTC device node in the DTB that
@@ -779,12 +780,10 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 
     aml_append(dsdt, scope);
 
-    /* copy AML table into ACPI tables blob and patch header there */
+    /* copy AML table into ACPI tables blob */
     g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
-    build_header(linker, table_data,
-        (void *)(table_data->data + table_data->len - dsdt->buf->len),
-                 "DSDT", dsdt->buf->len, 2, vms->oem_id,
-                 vms->oem_table_id);
+
+    acpi_table_end(linker, &table);
     free_aml_allocator();
 }
 
Signature · 1 line
2.27.0
#31 lore raw

PATCH v4 28/35 acpi: arm: virt: build_iort: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

---
v4:
* drop not related change
(Eric Auger <[email protected]>)
v3:
* fix conflicts due to
42e0f050e3a51 'hw/arm/virt-acpi-build: Add IORT support to bypass SMMUv3'
* * s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 14 ------------
 hw/arm/virt-acpi-build.c    | 44 +++++++++++++++----------------------
 2 files changed, 18 insertions(+), 40 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index bcada37601..195f90caf6 100644
@@ -188,20 +188,6 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * Input Output Remapping Table (IORT)
- * Conforms to "IO Remapping Table System Software on ARM Platforms",
- * Document number: ARM DEN 0049B, October 2015
- */
-
-struct AcpiIortTable {
-    ACPI_TABLE_HEADER_DEF     /* ACPI common table header */
-    uint32_t node_count;
-    uint32_t node_offset;
-    uint32_t reserved;
-} QEMU_PACKED;
-typedef struct AcpiIortTable AcpiIortTable;
-
 /*
  * IORT node types
  */
hw/arm/virt-acpi-build.c +18 -26

89 lines not on this page · raw message

Signature · 1 line
2.27.0
#32 lore raw

PATCH v4 29/35 acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API

In reply to Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building IORT table use endian agnostic build_append_int_noprefix() API to build it.

---
CC: Eric Auger <[email protected]>

v4:
- (Eric Auger <[email protected]>)
* keep nb_nodes
* encode 'Memory access properties' as separate entries according to Table 13
* keep some comments
v3:
* practically rewritten, due to conflicts wiht bypass iommu feature

---
 include/hw/acpi/acpi-defs.h |  71 ----------------
 hw/arm/virt-acpi-build.c    | 164 ++++++++++++++++++++----------------
 2 files changed, 93 insertions(+), 142 deletions(-)
include/hw/acpi/acpi-defs.h +0 -71
index 195f90caf6..6f2f08a9de 100644
@@ -188,75 +188,4 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * IORT node types
- */
-
-#define ACPI_IORT_NODE_HEADER_DEF   /* Node format common fields */ \
-    uint8_t  type;          \
-    uint16_t length;        \
-    uint8_t  revision;      \
-    uint32_t reserved;      \
-    uint32_t mapping_count; \
-    uint32_t mapping_offset;
-
-/* Values for node Type above */
-enum {
-        ACPI_IORT_NODE_ITS_GROUP = 0x00,
-        ACPI_IORT_NODE_NAMED_COMPONENT = 0x01,
-        ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02,
-        ACPI_IORT_NODE_SMMU = 0x03,
-        ACPI_IORT_NODE_SMMU_V3 = 0x04
-};
-
-struct AcpiIortIdMapping {
-    uint32_t input_base;
-    uint32_t id_count;
-    uint32_t output_base;
-    uint32_t output_reference;
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiIortIdMapping AcpiIortIdMapping;
-
-struct AcpiIortMemoryAccess {
-    uint32_t cache_coherency;
-    uint8_t  hints;
-    uint16_t reserved;
-    uint8_t  memory_flags;
-} QEMU_PACKED;
-typedef struct AcpiIortMemoryAccess AcpiIortMemoryAccess;
-
-struct AcpiIortItsGroup {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint32_t its_count;
-    uint32_t identifiers[];
-} QEMU_PACKED;
-typedef struct AcpiIortItsGroup AcpiIortItsGroup;
-
-#define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE 1
-
-struct AcpiIortSmmu3 {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint64_t base_address;
-    uint32_t flags;
-    uint32_t reserved2;
-    uint64_t vatos_address;
-    uint32_t model;
-    uint32_t event_gsiv;
-    uint32_t pri_gsiv;
-    uint32_t gerr_gsiv;
-    uint32_t sync_gsiv;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
-
-struct AcpiIortRC {
-    ACPI_IORT_NODE_HEADER_DEF
-    AcpiIortMemoryAccess memory_properties;
-    uint32_t ats_attribute;
-    uint32_t pci_segment_number;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortRC AcpiIortRC;
-
 #endif
hw/arm/virt-acpi-build.c +93 -71

216 lines not on this page · raw message

Signature · 1 line
2.27.0
Reviewed-by Tested-by on v4 29/35
#33 lore raw

Re: [PATCH v4 29/35] acpi: arm/virt: convert build_iort() to endian agnostic build_append_FOO() API

Quoted 273 lines · Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building IORT table use endian agnostic build_append_int_noprefix() API to build it.

---
CC: Eric Auger <[email protected]>

v4:
- (Eric Auger <[email protected]>)
* keep nb_nodes
* encode 'Memory access properties' as separate entries according to Table 13
* keep some comments
v3:
* practically rewritten, due to conflicts wiht bypass iommu feature

---
 include/hw/acpi/acpi-defs.h |  71 ----------------
 hw/arm/virt-acpi-build.c    | 164 ++++++++++++++++++++----------------
 2 files changed, 93 insertions(+), 142 deletions(-)
include/hw/acpi/acpi-defs.h +0 -71
index 195f90caf6..6f2f08a9de 100644
@@ -188,75 +188,4 @@ struct AcpiGenericTimerTable {
 } QEMU_PACKED;
 typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
 
-/*
- * IORT node types
- */
-
-#define ACPI_IORT_NODE_HEADER_DEF   /* Node format common fields */ \
-    uint8_t  type;          \
-    uint16_t length;        \
-    uint8_t  revision;      \
-    uint32_t reserved;      \
-    uint32_t mapping_count; \
-    uint32_t mapping_offset;
-
-/* Values for node Type above */
-enum {
-        ACPI_IORT_NODE_ITS_GROUP = 0x00,
-        ACPI_IORT_NODE_NAMED_COMPONENT = 0x01,
-        ACPI_IORT_NODE_PCI_ROOT_COMPLEX = 0x02,
-        ACPI_IORT_NODE_SMMU = 0x03,
-        ACPI_IORT_NODE_SMMU_V3 = 0x04
-};
-
-struct AcpiIortIdMapping {
-    uint32_t input_base;
-    uint32_t id_count;
-    uint32_t output_base;
-    uint32_t output_reference;
-    uint32_t flags;
-} QEMU_PACKED;
-typedef struct AcpiIortIdMapping AcpiIortIdMapping;
-
-struct AcpiIortMemoryAccess {
-    uint32_t cache_coherency;
-    uint8_t  hints;
-    uint16_t reserved;
-    uint8_t  memory_flags;
-} QEMU_PACKED;
-typedef struct AcpiIortMemoryAccess AcpiIortMemoryAccess;
-
-struct AcpiIortItsGroup {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint32_t its_count;
-    uint32_t identifiers[];
-} QEMU_PACKED;
-typedef struct AcpiIortItsGroup AcpiIortItsGroup;
-
-#define ACPI_IORT_SMMU_V3_COHACC_OVERRIDE 1
-
-struct AcpiIortSmmu3 {
-    ACPI_IORT_NODE_HEADER_DEF
-    uint64_t base_address;
-    uint32_t flags;
-    uint32_t reserved2;
-    uint64_t vatos_address;
-    uint32_t model;
-    uint32_t event_gsiv;
-    uint32_t pri_gsiv;
-    uint32_t gerr_gsiv;
-    uint32_t sync_gsiv;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortSmmu3 AcpiIortSmmu3;
-
-struct AcpiIortRC {
-    ACPI_IORT_NODE_HEADER_DEF
-    AcpiIortMemoryAccess memory_properties;
-    uint32_t ats_attribute;
-    uint32_t pci_segment_number;
-    AcpiIortIdMapping id_mapping_array[];
-} QEMU_PACKED;
-typedef struct AcpiIortRC AcpiIortRC;
-
 #endif
hw/arm/virt-acpi-build.c +72 -53
index 42ea460313..8c382915a9 100644
@@ -240,6 +240,28 @@ static void acpi_dsdt_add_tpm(Aml *scope, VirtMachineState *vms)
 }
 #endif
 
+#define ID_MAPPING_ENTRY_SIZE 20
+#define SMMU_V3_ENTRY_SIZE 60
+#define ROOT_COMPLEX_ENTRY_SIZE 32
+#define IORT_NODE_OFFSET 48
+
+static void build_iort_id_mapping(GArray *table_data, uint32_t input_base,
+                                  uint32_t id_count, uint32_t out_ref)
+{
+    /* Identity RID mapping covering the whole input RID range */
+    build_append_int_noprefix(table_data, input_base, 4); /* Input base */
+    build_append_int_noprefix(table_data, id_count, 4); /* Number of IDs */
+    build_append_int_noprefix(table_data, input_base, 4); /* Output base */
+    build_append_int_noprefix(table_data, out_ref, 4); /* Output Reference */
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
+}
+
+struct AcpiIortIdMapping {
+    uint32_t input_base;
+    uint32_t id_count;
+};
+typedef struct AcpiIortIdMapping AcpiIortIdMapping;
+
 /* Build the iort ID mapping to SMMUv3 for a given PCI host bridge */
 static int
 iort_host_bridges(Object *obj, void *opaque)
@@ -282,17 +304,16 @@ static void
 build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
     int i, nb_nodes, rc_mapping_count;
-    AcpiIortIdMapping *idmap;
-    AcpiIortItsGroup *its;
-    AcpiIortSmmu3 *smmu;
-    AcpiIortRC *rc;
-    const uint32_t iort_node_offset = 48;
+    const uint32_t iort_node_offset = IORT_NODE_OFFSET;
     size_t node_size, smmu_offset = 0;
+    AcpiIortIdMapping *idmap;
     GArray *smmu_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
     GArray *its_idmaps = g_array_new(false, true, sizeof(AcpiIortIdMapping));
 
     AcpiTable table = { .sig = "IORT", .rev = 0, .oem_id = vms->oem_id,
                         .oem_table_id = vms->oem_table_id };
+    /* Table 2 The IORT */
+    acpi_table_begin(&table, table_data);
 
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
         AcpiIortIdMapping next_range = {0};
@@ -330,100 +351,101 @@ build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
         nb_nodes = 2; /* RC, ITS */
         rc_mapping_count = 1;
     }
-
-    /* Table 2 The IORT */
-    acpi_table_begin(&table, table_data);
     /* Number of IORT Nodes */
     build_append_int_noprefix(table_data, nb_nodes, 4);
+
     /* Offset to Array of IORT Nodes */
-    build_append_int_noprefix(table_data, iort_node_offset, 4);
+    build_append_int_noprefix(table_data, IORT_NODE_OFFSET, 4);
     build_append_int_noprefix(table_data, 0, 4); /* Reserved */
 
-    /* ITS group node */
-    node_size =  sizeof(*its) + sizeof(uint32_t);
-    its = acpi_data_push(table_data, node_size);
-
-    its->type = ACPI_IORT_NODE_ITS_GROUP;
-    its->length = cpu_to_le16(node_size);
-    its->its_count = cpu_to_le32(1);
-    its->identifiers[0] = 0; /* MADT translation_id */
+    /* 3.1.1.3 ITS group node */
+    build_append_int_noprefix(table_data, 0 /* ITS Group */, 1); /* Type */
+    node_size =  20 /* fixed header size */ + 4 /* 1 GIC ITS Identifier */;
+    build_append_int_noprefix(table_data, node_size, 2); /* Length */
+    build_append_int_noprefix(table_data, 0, 1); /* Revision */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    build_append_int_noprefix(table_data, 0, 4); /* Number of ID mappings */
+    build_append_int_noprefix(table_data, 0, 4); /* Reference to ID Array */
+    build_append_int_noprefix(table_data, 1, 4); /* Number of ITSs */
+    /* GIC ITS Identifier Array */
+    build_append_int_noprefix(table_data, 0 /* MADT translation_id */, 4);
 
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
         int irq =  vms->irqmap[VIRT_SMMU] + ARM_SPI_BASE;
 
-        /* SMMUv3 node */
-        smmu_offset = iort_node_offset + node_size;
-        node_size = sizeof(*smmu) + sizeof(*idmap);
-        smmu = acpi_data_push(table_data, node_size);
-
-        smmu->type = ACPI_IORT_NODE_SMMU_V3;
-        smmu->length = cpu_to_le16(node_size);
-        smmu->mapping_count = cpu_to_le32(1);
-        smmu->mapping_offset = cpu_to_le32(sizeof(*smmu));
-        smmu->base_address = cpu_to_le64(vms->memmap[VIRT_SMMU].base);
-        smmu->flags = cpu_to_le32(ACPI_IORT_SMMU_V3_COHACC_OVERRIDE);
-        smmu->event_gsiv = cpu_to_le32(irq);
-        smmu->pri_gsiv = cpu_to_le32(irq + 1);
-        smmu->sync_gsiv = cpu_to_le32(irq + 2);
-        smmu->gerr_gsiv = cpu_to_le32(irq + 3);
-
-        /* Identity RID mapping covering the whole input RID range */
-        idmap = &smmu->id_mapping_array[0];
-        idmap->input_base = 0;
-        idmap->id_count = cpu_to_le32(0xFFFF);
-        idmap->output_base = 0;
+        smmu_offset = table_data->len - table.table_offset;
+        /* 3.1.1.2 SMMUv3 */
+        build_append_int_noprefix(table_data, 4 /* SMMUv3 */, 1); /* Type */
+        node_size =  SMMU_V3_ENTRY_SIZE + ID_MAPPING_ENTRY_SIZE;
+        build_append_int_noprefix(table_data, node_size, 2); /* Length */
+        build_append_int_noprefix(table_data, 0, 1); /* Revision */
+        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+        build_append_int_noprefix(table_data, 1, 4); /* Number of ID mappings */
+        /* Reference to ID Array */
+        build_append_int_noprefix(table_data, SMMU_V3_ENTRY_SIZE, 4);
+        /* Base address */
+        build_append_int_noprefix(table_data, vms->memmap[VIRT_SMMU].base, 8);
+        /* Flags */
+        build_append_int_noprefix(table_data, 1 /* COHACC OverrideNote */, 4);
+        build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+        build_append_int_noprefix(table_data, 0, 8); /* VATOS address */
+        /* Model */
+        build_append_int_noprefix(table_data, 0 /* Generic SMMU-v3 */, 4);
+        build_append_int_noprefix(table_data, irq, 4); /* Event */
+        build_append_int_noprefix(table_data, irq + 1, 4); /* PRI */
+        build_append_int_noprefix(table_data, irq + 3, 4); /* GERR */
+        build_append_int_noprefix(table_data, irq + 2, 4); /* Sync */
+
         /* output IORT node is the ITS group node (the first node) */
-        idmap->output_reference = cpu_to_le32(iort_node_offset);
+        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
     }
 
-    /* Root Complex Node */
-    node_size = sizeof(*rc) + sizeof(*idmap) * rc_mapping_count;
-    rc = acpi_data_push(table_data, node_size);
-
-    rc->type = ACPI_IORT_NODE_PCI_ROOT_COMPLEX;
-    rc->length = cpu_to_le16(node_size);
-    rc->mapping_count = cpu_to_le32(rc_mapping_count);
-    rc->mapping_offset = cpu_to_le32(sizeof(*rc));
-
-    /* fully coherent device */
-    rc->memory_properties.cache_coherency = cpu_to_le32(1);
-    rc->memory_properties.memory_flags = 0x3; /* CCA = CPM = DCAS = 1 */
-    rc->pci_segment_number = 0; /* MCFG pci_segment */
-
+    /* Table 16 Root Complex Node */
+    build_append_int_noprefix(table_data, 2 /* Root complex */, 1); /* Type */
+    node_size =  ROOT_COMPLEX_ENTRY_SIZE +
+                 ID_MAPPING_ENTRY_SIZE * rc_mapping_count;
+    build_append_int_noprefix(table_data, node_size, 2); /* Length */
+    build_append_int_noprefix(table_data, 0, 1); /* Revision */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
+    /* Number of ID mappings */
+    build_append_int_noprefix(table_data, rc_mapping_count, 4);

hw/arm/virt-acpi-build.c build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms) · line 421

Quoted 10 lines
hw/arm/virt-acpi-build.c +10 -0
+    /* Reference to ID Array */
+    build_append_int_noprefix(table_data, ROOT_COMPLEX_ENTRY_SIZE, 4);
+
+    /* Table 13 Memory access properties */
+    /* CCA: Cache Coherent Attribute */
+    build_append_int_noprefix(table_data, 1 /* fully coherent */, 4);
+    build_append_int_noprefix(table_data, 0, 1); /* AH: Note Allocation Hints */
+    build_append_int_noprefix(table_data, 0, 2); /* Reserved */
+    /* MAF: Note Memory Access Flags */
+    build_append_int_noprefix(table_data, 0x3 /* CCA = CPM = DCAS = 1 */, 1);

This is DACS and not DCAS but that's not your fault.

we can send a separate trivial patch afterwards to fix the typo.

Sanity checking with GICv3 and GICv2 and SMMUv3.

Thank you for the huge refactoring effort

Eric

Quoted 48 lines
hw/arm/virt-acpi-build.c +11 -18
+
+    build_append_int_noprefix(table_data, 0, 4); /* ATS Attribute */
+    /* MCFG pci_segment */
+    build_append_int_noprefix(table_data, 0, 4); /* PCI Segment number */
+
+    /* Output Reference */
     if (vms->iommu == VIRT_IOMMU_SMMUV3) {
         AcpiIortIdMapping *range;
 
         /* translated RIDs connect to SMMUv3 node: RC -> SMMUv3 -> ITS */
         for (i = 0; i < smmu_idmaps->len; i++) {
-            idmap = &rc->id_mapping_array[i];
             range = &g_array_index(smmu_idmaps, AcpiIortIdMapping, i);
-
-            idmap->input_base = cpu_to_le32(range->input_base);
-            idmap->id_count = cpu_to_le32(range->id_count);
-            idmap->output_base = cpu_to_le32(range->input_base);
             /* output IORT node is the smmuv3 node */
-            idmap->output_reference = cpu_to_le32(smmu_offset);
+            build_iort_id_mapping(table_data, range->input_base,
+                                  range->id_count, smmu_offset);
         }
 
         /* bypassed RIDs connect to ITS group node directly: RC -> ITS */
         for (i = 0; i < its_idmaps->len; i++) {
-            idmap = &rc->id_mapping_array[smmu_idmaps->len + i];
             range = &g_array_index(its_idmaps, AcpiIortIdMapping, i);
-
-            idmap->input_base = cpu_to_le32(range->input_base);
-            idmap->id_count = cpu_to_le32(range->id_count);
-            idmap->output_base = cpu_to_le32(range->input_base);
             /* output IORT node is the ITS group node (the first node) */
-            idmap->output_reference = cpu_to_le32(iort_node_offset);
+            build_iort_id_mapping(table_data, range->input_base,
+                                  range->id_count, iort_node_offset);
         }
     } else {
-        /* Identity RID mapping covering the whole input RID range */
-        idmap = &rc->id_mapping_array[0];
-        idmap->input_base = cpu_to_le32(0);
-        idmap->id_count = cpu_to_le32(0xFFFF);
-        idmap->output_base = cpu_to_le32(0);
         /* output IORT node is the ITS group node (the first node) */
-        idmap->output_reference = cpu_to_le32(iort_node_offset);
+        build_iort_id_mapping(table_data, 0, 0xFFFF, IORT_NODE_OFFSET);
     }
 
     acpi_table_end(linker, &table);
#34 lore raw

PATCH v4 30/35 acpi: arm/virt: build_spcr: fix invalid cast

In reply to Igor Mammedov

implicit cast to structure uint8_t member didn't raise error when assigning value from incorrect enum, but when using build_append_gas() (next patch) it will error out with (clang):
implicit conversion from enumeration type 'AmlRegionSpace' to different enumeration type 'AmlAddressSpace'
fix cast error by using correct AML_AS_SYSTEM_MEMORY enum

---
CC: [email protected]
CC: [email protected]
CC: [email protected]
CC: [email protected]

---
 hw/arm/virt-acpi-build.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
hw/arm/virt-acpi-build.c +1 -1
index 8c382915a9..7b8706b305 100644
@@ -465,7 +465,7 @@ build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 
     spcr->interface_type = 0x3;    /* ARM PL011 UART */
 
-    spcr->base_address.space_id = AML_SYSTEM_MEMORY;
+    spcr->base_address.space_id = AML_AS_SYSTEM_MEMORY;
     spcr->base_address.bit_width = 8;
     spcr->base_address.bit_offset = 0;
     spcr->base_address.access_width = 1;
Signature · 1 line
2.27.0
#35 lore raw

PATCH v4 31/35 acpi: arm/virt: build_spcr: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it, replace packed structure with endian agnostic build_append_FOO() API.

PS:
Spec is Microsoft hosted, however 1.02 is no where to be found (MS lists only the current revision) and the current revision is 1.07, so bring comments in line with 1.07 as this is the only available spec. There is no content change between originally implemented 1.02 (using QEMU code as reference) and 1.07. The only change is renaming 'Reserved2' field to 'Language', with the same 0 value.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

PS:
perhaps we should cache MS hosted specs in QEMU tree, given they do not maintain old revisions.

---
 include/hw/acpi/acpi-defs.h | 32 -----------------
 hw/arm/virt-acpi-build.c    | 68 ++++++++++++++++++++++---------------
 2 files changed, 41 insertions(+), 59 deletions(-)
include/hw/acpi/acpi-defs.h +0 -32
index 6f2f08a9de..012c4ffb3a 100644
@@ -117,38 +117,6 @@ typedef struct AcpiFadtData {
 #define ACPI_FADT_ARM_PSCI_COMPLIANT  (1 << 0)
 #define ACPI_FADT_ARM_PSCI_USE_HVC    (1 << 1)
 
-/*
- * Serial Port Console Redirection Table (SPCR), Rev. 1.02
- *
- * For .interface_type see Debug Port Table 2 (DBG2) serial port
- * subtypes in Table 3, Rev. May 22, 2012
- */
-struct AcpiSerialPortConsoleRedirection {
-    ACPI_TABLE_HEADER_DEF
-    uint8_t  interface_type;
-    uint8_t  reserved1[3];
-    struct AcpiGenericAddress base_address;
-    uint8_t  interrupt_types;
-    uint8_t  irq;
-    uint32_t gsi;
-    uint8_t  baud;
-    uint8_t  parity;
-    uint8_t  stopbits;
-    uint8_t  flowctrl;
-    uint8_t  term_type;
-    uint8_t  reserved2;
-    uint16_t pci_device_id;
-    uint16_t pci_vendor_id;
-    uint8_t  pci_bus;
-    uint8_t  pci_slot;
-    uint8_t  pci_func;
-    uint32_t pci_flags;
-    uint8_t  pci_seg;
-    uint32_t reserved3;
-} QEMU_PACKED;
-typedef struct AcpiSerialPortConsoleRedirection
-               AcpiSerialPortConsoleRedirection;
-
 /*
  * ACPI 1.0 Firmware ACPI Control Structure (FACS)
  */
hw/arm/virt-acpi-build.c +41 -27

80 lines not on this page · raw message

Signature · 1 line
2.27.0
#36 lore raw

PATCH v4 32/35 acpi: arm/virt: build_gtdt: use acpi_table_begin()/acpi_table_end() instead of build_header()

In reply to Igor Mammedov

it replaces error-prone pointer arithmetic for build_header() API, with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it, replace packed structure with endian agnostic build_append_FOO() API.

---
v3:
* s/acpi_init_table|acpi_table_composed/acpi_table_begin|acpi_table_end/

---
 include/hw/acpi/acpi-defs.h | 25 -------------
 hw/arm/virt-acpi-build.c    | 75 ++++++++++++++++++++++++-------------
 2 files changed, 48 insertions(+), 52 deletions(-)
include/hw/acpi/acpi-defs.h +0 -25
index 012c4ffb3a..0b375e7589 100644
@@ -131,29 +131,4 @@ struct AcpiFacsDescriptorRev1 {
 } QEMU_PACKED;
 typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
 
-/*
- * Generic Timer Description Table (GTDT)
- */
-#define ACPI_GTDT_INTERRUPT_MODE_LEVEL    (0 << 0)
-#define ACPI_GTDT_INTERRUPT_MODE_EDGE     (1 << 0)
-#define ACPI_GTDT_CAP_ALWAYS_ON           (1 << 2)
-
-struct AcpiGenericTimerTable {
-    ACPI_TABLE_HEADER_DEF
-    uint64_t counter_block_addresss;
-    uint32_t reserved;
-    uint32_t secure_el1_interrupt;
-    uint32_t secure_el1_flags;
-    uint32_t non_secure_el1_interrupt;
-    uint32_t non_secure_el1_flags;
-    uint32_t virtual_timer_interrupt;
-    uint32_t virtual_timer_flags;
-    uint32_t non_secure_el2_interrupt;
-    uint32_t non_secure_el2_flags;
-    uint64_t counter_read_block_address;
-    uint32_t platform_timer_count;
-    uint32_t platform_timer_offset;
-} QEMU_PACKED;
-typedef struct AcpiGenericTimerTable AcpiGenericTimerTable;
-
 #endif
hw/arm/virt-acpi-build.c +48 -27

88 lines not on this page · raw message

Signature · 1 line
2.27.0
#37 lore raw

PATCH v4 33/35 acpi: build_facs: use build_append_int_noprefix() API to compose table

In reply to Igor Mammedov

Drop usage of packed structures and explicit endian conversions when building table and use endian agnostic build_append_int_noprefix() API to build it.

---
CC: [email protected]

---
 include/hw/acpi/acpi-defs.h | 14 --------------
 hw/i386/acpi-build.c        | 18 ++++++++++++++----
 2 files changed, 14 insertions(+), 18 deletions(-)
include/hw/acpi/acpi-defs.h +0 -14
index 0b375e7589..1a0774edd6 100644
@@ -117,18 +117,4 @@ typedef struct AcpiFadtData {
 #define ACPI_FADT_ARM_PSCI_COMPLIANT  (1 << 0)
 #define ACPI_FADT_ARM_PSCI_USE_HVC    (1 << 1)
 
-/*
- * ACPI 1.0 Firmware ACPI Control Structure (FACS)
- */
-struct AcpiFacsDescriptorRev1 {
-    uint32_t signature;           /* ACPI Signature */
-    uint32_t length;                 /* Length of structure, in bytes */
-    uint32_t hardware_signature;     /* Hardware configuration signature */
-    uint32_t firmware_waking_vector; /* ACPI OS waking vector */
-    uint32_t global_lock;            /* Global Lock */
-    uint32_t flags;
-    uint8_t  resverved3 [40];        /* Reserved - must be zero */
-} QEMU_PACKED;
-typedef struct AcpiFacsDescriptorRev1 AcpiFacsDescriptorRev1;
-
 #endif
hw/i386/acpi-build.c +14 -4
index fde48a7377..d1c28440f4 100644
@@ -345,13 +345,23 @@ static void acpi_align_size(GArray *blob, unsigned align)
     g_array_set_size(blob, ROUND_UP(acpi_data_len(blob), align));
 }
 
-/* FACS */
+/*
+ * ACPI spec 1.0b,
+ * 5.2.6 Firmware ACPI Control Structure
+ */
 static void
 build_facs(GArray *table_data)
 {
-    AcpiFacsDescriptorRev1 *facs = acpi_data_push(table_data, sizeof *facs);
-    memcpy(&facs->signature, "FACS", 4);
-    facs->length = cpu_to_le32(sizeof(*facs));
+    const char *sig = "FACS";
+    const uint8_t reserved[40] = {};
+
+    g_array_append_vals(table_data, sig, 4); /* Signature */
+    build_append_int_noprefix(table_data, 64, 4); /* Length */
+    build_append_int_noprefix(table_data, 0, 4); /* Hardware Signature */
+    build_append_int_noprefix(table_data, 0, 4); /* Firmware Waking Vector */
+    build_append_int_noprefix(table_data, 0, 4); /* Global Lock */
+    build_append_int_noprefix(table_data, 0, 4); /* Flags */
+    g_array_append_vals(table_data, reserved, 40); /* Reserved */
 }
 
 static void build_append_pcihp_notify_entry(Aml *method, int slot)
Signature · 1 line
2.27.0
#38 lore raw

PATCH v4 34/35 acpi: remove no longer used build_header()

In reply to Igor Mammedov
---
 include/hw/acpi/acpi-defs.h | 25 -------------------------
 include/hw/acpi/aml-build.h |  4 ----
 hw/acpi/aml-build.c         | 23 -----------------------
 3 files changed, 52 deletions(-)
include/hw/acpi/acpi-defs.h +0 -25
index 1a0774edd6..ee733840aa 100644
@@ -48,31 +48,6 @@ typedef struct AcpiRsdpData {
     unsigned *xsdt_tbl_offset;
 } AcpiRsdpData;
 
-/* Table structure from Linux kernel (the ACPI tables are under the
-   BSD license) */
-
-
-#define ACPI_TABLE_HEADER_DEF   /* ACPI common table header */ \
-    uint32_t signature;          /* ACPI signature (4 ASCII characters) */ \
-    uint32_t length;                 /* Length of table, in bytes, including header */ \
-    uint8_t  revision;               /* ACPI Specification minor version # */ \
-    uint8_t  checksum;               /* To make sum of entire table == 0 */ \
-    uint8_t  oem_id[6] \
-                 QEMU_NONSTRING;     /* OEM identification */ \
-    uint8_t  oem_table_id[8] \
-                 QEMU_NONSTRING;     /* OEM table identification */ \
-    uint32_t oem_revision;           /* OEM revision number */ \
-    uint8_t  asl_compiler_id[4] \
-                 QEMU_NONSTRING;     /* ASL compiler vendor ID */ \
-    uint32_t asl_compiler_revision;  /* ASL compiler revision number */
-
-
-/* ACPI common table header */
-struct AcpiTableHeader {
-    ACPI_TABLE_HEADER_DEF
-} QEMU_PACKED;
-typedef struct AcpiTableHeader AcpiTableHeader;
-
 struct AcpiGenericAddress {
     uint8_t space_id;        /* Address space where struct or register exists */
     uint8_t bit_width;       /* Size in bits of given register */
include/hw/acpi/aml-build.h +0 -4
index 6e1f42e119..3cf6f2c1b9 100644
@@ -444,10 +444,6 @@ void acpi_table_begin(AcpiTable *desc, GArray *array);
  */
 void acpi_table_end(BIOSLinker *linker, AcpiTable *table);
 
-void
-build_header(BIOSLinker *linker, GArray *table_data,
-             AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
-             const char *oem_id, const char *oem_table_id);
 void *acpi_data_push(GArray *table_data, unsigned size);
 unsigned acpi_data_len(GArray *table);
 void acpi_add_table(GArray *table_offsets, GArray *table_data);
hw/acpi/aml-build.c +0 -23
index c0f339847a..76af0ebaf9 100644
@@ -1754,29 +1754,6 @@ void acpi_table_end(BIOSLinker *linker, AcpiTable *desc)
         desc->table_offset, table_len, desc->table_offset + checksum_offset);
 }
 
-void
-build_header(BIOSLinker *linker, GArray *table_data,
-             AcpiTableHeader *h, const char *sig, int len, uint8_t rev,
-             const char *oem_id, const char *oem_table_id)
-{
-    unsigned tbl_offset = (char *)h - table_data->data;
-    unsigned checksum_offset = (char *)&h->checksum - table_data->data;
-    memcpy(&h->signature, sig, 4);
-    h->length = cpu_to_le32(len);
-    h->revision = rev;
-
-    strpadcpy((char *)h->oem_id, sizeof h->oem_id, oem_id, ' ');
-    strpadcpy((char *)h->oem_table_id, sizeof h->oem_table_id,
-              oem_table_id, ' ');
-
-    h->oem_revision = cpu_to_le32(1);
-    memcpy(h->asl_compiler_id, ACPI_BUILD_APPNAME8, 4);
-    h->asl_compiler_revision = cpu_to_le32(1);
-    /* Checksum to be filled in by Guest linker */
-    bios_linker_loader_add_checksum(linker, ACPI_BUILD_TABLE_FILE,
-        tbl_offset, len, checksum_offset);
-}
-
 void *acpi_data_push(GArray *table_data, unsigned size)
 {
     unsigned off = table_data->len;
Signature · 1 line
2.27.0
#39 lore raw

PATCH v4 35/35 acpi: AcpiGenericAddress no longer used to map/access fields of MMIO, drop packed attribute

In reply to Igor Mammedov
---
 include/hw/acpi/acpi-defs.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
include/hw/acpi/acpi-defs.h +1 -1
index ee733840aa..c97e8633ad 100644
@@ -55,7 +55,7 @@ struct AcpiGenericAddress {
     uint8_t access_width;    /* ACPI 3.0: Minimum Access size (ACPI 3.0),
                                 ACPI 2.0: Reserved, Table 5-1 */
     uint64_t address;        /* 64-bit address of struct or register */
-} QEMU_PACKED;
+};
 
 typedef struct AcpiFadtData {
     struct AcpiGenericAddress pm1a_cnt;   /* PM1a_CNT_BLK */
Signature · 1 line
2.27.0