Add Onion Omega2/2+ board support
Subsystems (3)
v6 cover Add Onion Omega2/2+ board support
Add support for the MediaTek based boards by Onion. Commit one to three are rather generic, whereas the last commit adds the actual board support.
Changes in v6:
- Remove all vendor specific code from the board files.
Changes in v5:
- Reimplement the Makefile size check.
Changes in v4:
- Rebase board support to v2025.07
- Add new commit to silence warning in arch/mips/
Changes in v3:
- Simplify image size check.
Changes in v2:
- I forgot to run checkpatch in v1. Fix some style issues in v2.
Philip Oberfichtner (4):
Makefile: Simplify size check
Makefile: Add size check for u-boot-with-spl.bin
mips: serial: Silence "unused variable" warning
mips: mt7628: Add Onion Omega2/2+ board support
Makefile | 45 ++++---------- arch/mips/dts/Makefile | 1 + arch/mips/dts/onion-omega2p.dts | 58 ++++++++++++++++++ arch/mips/mach-mtmips/mt7620/serial.c | 2 +- arch/mips/mach-mtmips/mt7621/spl/serial.c | 2 +- arch/mips/mach-mtmips/mt7628/Kconfig | 7 +++ arch/mips/mach-mtmips/mt7628/serial.c | 2 +- board/onion/omega2p/Kconfig | 12 ++++ board/onion/omega2p/MAINTAINERS | 6 ++ common/spl/Kconfig | 7 +++ configs/onion-omega2p_defconfig | 73 +++++++++++++++++++++++ include/configs/onion-omega2p.h | 15 +++++ tools/spl_size_limit.c | 2 +- 13 files changed, 194 insertions(+), 38 deletions(-) create mode 100644 arch/mips/dts/onion-omega2p.dts create mode 100644 board/onion/omega2p/Kconfig create mode 100644 board/onion/omega2p/MAINTAINERS create mode 100644 configs/onion-omega2p_defconfig create mode 100644 include/configs/onion-omega2p.h
Signature · 1 line
2.39.5
PATCH v6 1/4 Makefile: Simplify size check
Deduplicate some redundancies within the SIZE_CHECK code in the toplevel Makefile. No functional changes.
---
Notes:
Changes in v6: none
Changes in v5:
- Fix for broken boards reported in v4
- See https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
Makefile | 44 ++++++++++-------------------------------- tools/spl_size_limit.c | 2 +- 2 files changed, 11 insertions(+), 35 deletions(-)
Makefile +10 -34
@@ -432,7 +432,7 @@ KBUILD_HOSTLDLIBS := $(HOST_LFS_LIBS) $(HOSTLDLIBS) define size_check actual=$$( wc -c $1 | awk '{print $$1}'); \ limit=$$( printf "%d" $2 ); \ - if test $$actual -gt $$limit; then \ + if test $$limit -gt 0 && test $$actual -gt $$limit; then \ echo "$1 exceeds file size limit:" >&2; \ echo " limit: $$(printf %#x $$limit) bytes" >&2; \ echo " actual: $$(printf %#x $$actual) bytes" >&2; \
@@ -1103,30 +1103,6 @@ LDPPFLAGS += \ ######################################################################### ######################################################################### -ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) -BOARD_SIZE_CHECK= @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT)) -else -BOARD_SIZE_CHECK = -endif - -ifneq ($(CONFIG_SPL_SIZE_LIMIT),0x0) -SPL_SIZE_CHECK = @$(call size_check,$@,$$(tools/spl_size_limit)) -else -SPL_SIZE_CHECK = -endif - -ifneq ($(CONFIG_TPL_SIZE_LIMIT),0x0) -TPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT)) -else -TPL_SIZE_CHECK = -endif - -ifneq ($(CONFIG_VPL_SIZE_LIMIT),0x0) -VPL_SIZE_CHECK = @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT)) -else -VPL_SIZE_CHECK = -endif - # Statically apply RELA-style relocations (currently arm64 only) # This is useful for arm64 where static relocation needs to be performed on # the raw binary, but certain simulators only accept an ELF file (but don't
@@ -1470,7 +1446,7 @@ endif %.imx: $(IMX_DEPS) %.bin $(Q)$(MAKE) $(build)=arch/arm/mach-imx $@ - $(BOARD_SIZE_CHECK) + @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT)) %.vyb: %.imx $(Q)$(MAKE) $(build)=arch/arm/cpu/armv7/vf610 $@
@@ -1571,11 +1547,11 @@ endif u-boot-nodtb.bin: u-boot FORCE $(call if_changed,objcopy_uboot) - $(BOARD_SIZE_CHECK) + @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT)) u-boot.ldr: u-boot $(LDR) -T $(CONFIG_LDR_CPU) -c $@ $< $(LDR_FLAGS) - $(BOARD_SIZE_CHECK) + @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT)) # binman # ---------------------------------------------------------------------------
@@ -1702,7 +1678,7 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \ $(if $(CONFIG_OF_SEPARATE)$(CONFIG_OF_EMBED)$(CONFIG_SANDBOX),dts/dt.dtb) \ ,$(UBOOT_BIN)) FORCE $(call if_changed,mkimage) - $(BOARD_SIZE_CHECK) + @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT)) ifeq ($(CONFIG_SPL_LOAD_FIT_FULL),y) MKIMAGEFLAGS_u-boot.itb =
@@ -1717,12 +1693,12 @@ u-boot.itb: u-boot-nodtb.bin \ $(if $(CONFIG_MULTI_DTB_FIT),$(FINAL_DTB_CONTAINER)) \ $(U_BOOT_ITS) FORCE $(call if_changed,mkfitimage) - $(BOARD_SIZE_CHECK) + @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT)) endif u-boot-with-spl.kwb: u-boot.bin spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) - $(BOARD_SIZE_CHECK) + @ $(call size_check,$@,$(CONFIG_BOARD_SIZE_LIMIT)) u-boot.dis: u-boot $(OBJDUMP) -d $< > $@
@@ -2346,7 +2322,7 @@ u-boot.lds: $(LDSCRIPT) prepare FORCE spl/u-boot-spl.bin: spl/u-boot-spl @: - $(SPL_SIZE_CHECK) + @$(call size_check,$@,$$(tools/spl_size_limit)) spl/u-boot-spl-dtb.bin: spl/u-boot-spl @:
@@ -2371,14 +2347,14 @@ spl/boot.bin: spl/u-boot-spl tpl/u-boot-tpl.bin: tpl/u-boot-tpl @: - $(TPL_SIZE_CHECK) + @$(call size_check,$@,$(CONFIG_TPL_SIZE_LIMIT)) tpl/u-boot-tpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb) $(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.xpl all vpl/u-boot-vpl.bin: vpl/u-boot-vpl @: - $(VPL_SIZE_CHECK) + @$(call size_check,$@,$(CONFIG_VPL_SIZE_LIMIT)) vpl/u-boot-vpl: tools prepare $(if $(CONFIG_TPL_OF_CONTROL),dts/dt.dtb) $(Q)$(MAKE) obj=vpl -f $(srctree)/scripts/Makefile.xpl all
tools/spl_size_limit.c +1 -1
@@ -28,6 +28,6 @@ int main(int argc, char *argv[])#endif #endif -printf ("%d" , spl_size_limit); +printf ("%d" , spl_size_limit >0 ? spl_size_limit :0 );return 0 ; }
Signature · 1 line
2.39.5
PATCH v6 2/4 Makefile: Add size check for u-boot-with-spl.bin
In reply to Philip OberfichtnerIntroduce another SIZE_CHECK macro for u-boot-with-spl.bin.
Note that we cannot reuse BOARD_SIZE_LIMIT here, as this also applies to intermediate u-boot*bin images, which, before being compressed, may be larger than the final combined image.
Also SPL_SIZE_LIMIT has to be a separate option, as some boards might just want to restrict SPL size while still allowing u-boot-with-spl.bin to be bigger.
---
Notes:
Changes in v6: none
Changes in v5:
- Fix for broken boards reported in v4
- See https://patchwork.ozlabs.org/project/uboot/patch/[email protected]/
Changes in v4: none
Changes in v3:
Reuse existing SPL_SIZE_LIMIT instead of implementing a new option
Changes in v2: none
Makefile | 1 + common/spl/Kconfig | 7 +++++++ 2 files changed, 8 insertions(+)
Makefile +1 -0
@@ -1715,6 +1715,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE $(call if_changed,pad_cat) + @$(call size_check,$@,$(CONFIG_UBOOT_WITH_SPL_SIZE_LIMIT)) ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)
common/spl/Kconfig +7 -0
@@ -36,6 +36,13 @@ config SPL_FRAMEWORK_BOARD_INIT_F - initialize the serial (preloader_console_init) Unless you want to provide your own board_init_f, you should say Y. +config UBOOT_WITH_SPL_SIZE_LIMIT + hex "Maximum size of u-boot-with-spl.bin" + default 0x0 + help + Specifies the maximum length of the u-boot-with-spl.bin image. + If this value is zero, it is ignored. + config SPL_SIZE_LIMIT hex "Maximum size of SPL image" default 0x11000 if ARCH_MX6 && !MX6_OCRAM_256KB
Signature · 1 line
2.39.5
Re: [PATCH v6 2/4] Makefile: Add size check for u-boot-with-spl.bin
On 8/7/25 9:56 AM, Philip Oberfichtner wrote:
[...]
Makefile OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ · line 1718
Quoted 6 lines
+++ b/Makefile
Makefile +1
-0@@ -1715,6 +1715,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE $(call if_changed,pad_cat) + @$(call size_check,$@,$(CONFIG_UBOOT_WITH_SPL_SIZE_LIMIT))
It seems other size checks are not called unconditionally, see Makefile around line 1100 . Why is this one called unconditionally ? Won't this break boards which default this new option to 0 ?
Quoted 7 lines
Makefile +0
-0ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)common/spl/Kconfig +0
-0
common/spl/Kconfig config SPL_FRAMEWORK_BOARD_INIT_F · line 44
Quoted 9 lines
common/spl/Kconfig +6
-0@@ -36,6 +36,13 @@ config SPL_FRAMEWORK_BOARD_INIT_F - initialize the serial (preloader_console_init) Unless you want to provide your own board_init_f, you should say Y. +config UBOOT_WITH_SPL_SIZE_LIMIT + hex "Maximum size of u-boot-with-spl.bin" + default 0x0 + help + Specifies the maximum length of the u-boot-with-spl.bin image. + If this value is zero, it is ignored.
Why not set SPL_SIZE_LIMIT and BOARD_SIZE_LIMIT ?
Re: [PATCH v6 2/4] Makefile: Add size check for u-boot-with-spl.bin
Quoted 4 lines · Marek Vasut
On 8/7/25 9:56 AM, Philip Oberfichtner wrote:
[...]
Quoted 10 lines
Makefile OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ · line 1718
Quoted 6 lines
+++ b/Makefile
Makefile +1
-0@@ -1715,6 +1715,7 @@ OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE $(call if_changed,pad_cat) + @$(call size_check,$@,$(CONFIG_UBOOT_WITH_SPL_SIZE_LIMIT))It seems other size checks are not called unconditionally, see
Makefilearound line 1100 . Why is this one called unconditionally ? Won't this break boards which default this new option to 0 ?
No. Please see the
"test $$limit -gt 0"
in [PATCH 1/4].
Quoted 17 lines
Quoted 8 lines
Makefile +0
-0ifeq ($(CONFIG_ARCH_LPC32XX)$(CONFIG_SPL),yy) MKIMAGEFLAGS_lpc32xx-spl.img = -T lpc32xximage -a $(CONFIG_SPL_TEXT_BASE)common/spl/Kconfig +0
-0common/spl/Kconfig config SPL_FRAMEWORK_BOARD_INIT_F · line 43
Quoted 8 lines
common/spl/Kconfig +6
-0@@ -36,6 +36,13 @@ config SPL_FRAMEWORK_BOARD_INIT_F - initialize the serial (preloader_console_init) Unless you want to provide your own board_init_f, you should say Y. +config UBOOT_WITH_SPL_SIZE_LIMIT + hex "Maximum size of u-boot-with-spl.bin" + default 0x0 + help + Specifies the maximum length of the u-boot-with-spl.bin image. + If this value is zero, it is ignored.Why not set
SPL_SIZE_LIMITandBOARD_SIZE_LIMIT?
Please refer to the commit message above, where I explained my rationale.
Signature · 5 lines
===================================================================== DENX Software Engineering GmbH, Managing Director: Johanna Denk, Tabea Lutz HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany =====================================================================
PATCH v6 3/4 mips: serial: Silence "unused variable" warning
In reply to Philip OberfichtnerBefore this commit, mtmips_spl_serial_init() caused the following warning:
arch/mips/mach-mtmips/mt7628/serial.c:14:23: warning: unused variable ‘base’ [-Wunused-variable]
14 | void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);
| ^~~~This happens whenever CONFIG_SPECIFY_CONSOLE_INDEX is unset, which leads to an effectively empty function:
void mtmips_spl_serial_init(void)
{
void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE);}
Add the __maybe_unused attribute to silence this warning.
---
Notes:
Changes in v6: none
Changes in v5: none
Changes in v4: new
arch/mips/mach-mtmips/mt7620/serial.c | 2 +- arch/mips/mach-mtmips/mt7621/spl/serial.c | 2 +- arch/mips/mach-mtmips/mt7628/serial.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
arch/mips/mach-mtmips/mt7620/serial.c +1 -1
@@ -24,7 +24,7 @@ void board_debug_uart_init(void)void mtmips_spl_serial_init (void ) {#ifdef CONFIG_SPL_SERIAL -void __iomem *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); +void __iomem __maybe_unused *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE );#if CONFIG_CONS_INDEX ==1 clrbits_32 (base +SYSCTL_GPIOMODE_REG ,UARTL_GPIO_MODE );
arch/mips/mach-mtmips/mt7621/spl/serial.c +1 -1
@@ -11,7 +11,7 @@void mtmips_spl_serial_init (void ) {#ifdef CONFIG_SPL_SERIAL -void __iomem *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); +void __iomem __maybe_unused *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE );#if CONFIG_CONS_INDEX ==1 clrbits_32 (base +SYSCTL_GPIOMODE_REG ,UART1_MODE );
arch/mips/mach-mtmips/mt7628/serial.c +1 -1
@@ -11,7 +11,7 @@void mtmips_spl_serial_init (void ) {#ifdef CONFIG_SPL_SERIAL -void __iomem *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE ); +void __iomem __maybe_unused *base =ioremap_nocache (SYSCTL_BASE ,SYSCTL_SIZE );#if CONFIG_CONS_INDEX ==1 clrbits_32 (base +SYSCTL_GPIO_MODE1_REG ,UART0_MODE_M );
Signature · 1 line
2.39.5
Re: [PATCH v6 3/4] mips: serial: Silence "unused variable" warning
Quoted 23 lines · Philip Oberfichtner
Before this commit,
mtmips_spl_serial_init()caused the following warning:arch/mips/mach-mtmips/mt7628/serial.c:14:23: warning: unused variable ‘base’ [-Wunused-variable] 14 | void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE); | ^~~~This happens whenever
CONFIG_SPECIFY_CONSOLE_INDEXis unset, which leads to an effectively empty function:void mtmips_spl_serial_init(void) { void __iomem *base = ioremap_nocache(SYSCTL_BASE, SYSCTL_SIZE); }Add the
__maybe_unusedattribute to silence this warning.Signed-off-by Philip Oberfichtner <[email protected]>---
Notes:
Changes in v6: none
Quoted 9 lines
Changes in v5: none
Changes in v4: new
arch/mips/mach-mtmips/mt7620/serial.c | 2 +- arch/mips/mach-mtmips/mt7621/spl/serial.c | 2 +- arch/mips/mach-mtmips/mt7628/serial.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)
Signature · 1 line
- Daniel
PATCH v6 4/4 mips: mt7628: Add Onion Omega2/2+ board support
In reply to Philip OberfichtnerThe Omega2 / Omega2+ are based on the MediaTek MT7688 SoC with the following features:
- 64 / 128MB of DDR2 memory
- 16 / 32MB of SPI NOR flash
- USB, WiFi and many more peripherals
---
Notes:
Changes in v6:
As Daniel pointed out in his review, vendor specific configurations should be kept in the downstream sources. All of this non-generic code has been removed in v6. Most notably, that is:
- custom environment and bootcommand
- network settings
- mtd partitioning
Apart from that, there are a few more simplifications, like the removal of gpio_init() and superfluous spi drivers.
Changes in v5: none
Changes in v4:
- Adapt bootcmd
- Rebase defconfig
Changes in v3:
- Adapt defconfig to [PATCH 1/2] (SPL_SIZE_LIMIT)
Changes in v2:
- Fix style issues as reported by checkpatch
- Add MAINTAINERS file
arch/mips/dts/Makefile | 1 + arch/mips/dts/onion-omega2p.dts | 58 ++++++++++++++++++++++ arch/mips/mach-mtmips/mt7628/Kconfig | 7 +++ board/onion/omega2p/Kconfig | 12 +++++ board/onion/omega2p/MAINTAINERS | 6 +++ configs/onion-omega2p_defconfig | 73 ++++++++++++++++++++++++++++ include/configs/onion-omega2p.h | 15 ++++++ 7 files changed, 172 insertions(+) create mode 100644 arch/mips/dts/onion-omega2p.dts create mode 100644 board/onion/omega2p/Kconfig create mode 100644 board/onion/omega2p/MAINTAINERS create mode 100644 configs/onion-omega2p_defconfig create mode 100644 include/configs/onion-omega2p.h
arch/mips/dts/Makefile +1 -0
@@ -21,6 +21,7 @@ dtb-$(CONFIG_BOARD_MT7621_NAND_RFB) += mediatek,mt7621-nand-rfb.dtb dtb-$(CONFIG_BOARD_MT7628_RFB) += mediatek,mt7628-rfb.dtb dtb-$(CONFIG_BOARD_GARDENA_SMART_GATEWAY_MT7688) += gardena-smart-gateway-mt7688.dtb dtb-$(CONFIG_BOARD_LINKIT_SMART_7688) += linkit-smart-7688.dtb +dtb-$(CONFIG_BOARD_ONION_OMEGA2) += onion-omega2p.dtb dtb-$(CONFIG_TARGET_OCTEON_EBB7304) += mrvl,octeon-ebb7304.dtb dtb-$(CONFIG_TARGET_OCTEON_NIC23) += mrvl,octeon-nic23.dtb dtb-$(CONFIG_BOARD_NETGEAR_CG3100D) += netgear,cg3100d.dtb
arch/mips/dts/onion-omega2p.dts new file +58 -0
58 lines not on this page · raw message
arch/mips/mach-mtmips/mt7628/Kconfig +7 -0
@@ -27,6 +27,12 @@ config BOARD_MT7628_RFB SPI-NOR flash, 1 built-in switch with 5 ports, 1 UART, 1 USB host, 1 SDXC, 1 PCIe socket and JTAG pins. +config BOARD_ONION_OMEGA2 + bool "Onion Omega2/2+" + help + Onion Omega2/2+ IoT computer. Has a MT7688 SoC with 64/128 MiB of DDR2 + RAM and 16/32 MiB of SPI flash. + config BOARD_VOCORE2 bool "VoCore2" select SPL_SERIAL
@@ -52,6 +58,7 @@ config SYS_CONFIG_NAME default "mt7628" if BOARD_MT7628_RFB source "board/gardena/smart-gateway-mt7688/Kconfig" +source "board/onion/omega2p/Kconfig" source "board/seeed/linkit-smart-7688/Kconfig" source "board/vocore/vocore2/Kconfig"
board/onion/omega2p/Kconfig new file +12 -0
@@ -0,0 +1,12 @@ +if BOARD_ONION_OMEGA2 + +config SYS_BOARD + default "omega2p" + +config SYS_VENDOR + default "onion" + +config SYS_CONFIG_NAME + default "onion-omega2p" + +endif
board/onion/omega2p/MAINTAINERS new file +6 -0
@@ -0,0 +1,6 @@ +ONION OMEGA2/2+ +M: Philip Oberfichtner <[email protected]> +S: Maintained +F: arch/mips/dts/onion-omega2p.dts +F: configs/onion-omega2p_defconfig +F: include/configs/onion-omega2p.h
configs/onion-omega2p_defconfig new file +73 -0
73 lines not on this page · raw message
include/configs/onion-omega2p.h new file +15 -0
@@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Copyright (C) 2024 Zheng Han <[email protected]>, Lazar Demin <[email protected]> +*/ +#ifndef __CONFIG_ONION_OMEGA2P_H +#define __CONFIG_ONION_OMEGA2P_H + +/* RAM */ +#define CFG_SYS_SDRAM_BASE 0x80000000 +#define CFG_SYS_INIT_SP_OFFSET 0x400000 + +/* Dummy value */ +#define CFG_SYS_UBOOT_BASE 0 + +#endif /* __CONFIG_ONION_OMEGA2P_H */
Signature · 1 line
2.39.5
Re: [PATCH v6 4/4] mips: mt7628: Add Onion Omega2/2+ board support
Quoted 43 lines · Philip Oberfichtner
The Omega2 / Omega2+ are based on the MediaTek MT7688 SoC with the following features:
- 64 / 128MB of DDR2 memory
- 16 / 32MB of SPI NOR flash
- USB, WiFi and many more peripheralsSigned-off-by Philip Oberfichtner <[email protected]>---
Notes:
Changes in v6:
As Daniel pointed out in his review, vendor specific configurations should be kept in the downstream sources. All of this non-generic code has been removed in v6. Most notably, that is:
- custom environment and bootcommand
- network settings
- mtd partitioningApart from that, there are a few more simplifications, like the removal of
gpio_init()and superfluous spi drivers.Changes in v5: none
Changes in v4:
- Adapt bootcmd
- Rebase defconfigChanges in v3:
- Adapt defconfig to [PATCH 1/2] (SPL_SIZE_LIMIT)Changes in v2:
- Fix style issues as reported by checkpatch
- AddMAINTAINERSfilearch/mips/dts/Makefile | 1 + arch/mips/dts/onion-omega2p.dts | 58 ++++++++++++++++++++++ arch/mips/mach-mtmips/mt7628/Kconfig | 7 +++ board/onion/omega2p/Kconfig | 12 +++++ board/onion/omega2p/MAINTAINERS | 6 +++ configs/onion-omega2p_defconfig | 73 ++++++++++++++++++++++++++++ include/configs/onion-omega2p.h | 15 ++++++ 7 files changed, 172 insertions(+)
Quoted 6 lines
create mode 100644
arch/mips/dts/onion-omega2p.dtscreate mode 100644 board/onion/omega2p/Kconfig create mode 100644 board/onion/omega2p/MAINTAINERS create mode 100644 configs/onion-omega2p_defconfig create mode 100644include/configs/onion-omega2p.h
Signature · 1 line
- Daniel
Quoted 2 lines · Philip Oberfichtner
Add support for the MediaTek based boards by Onion. Commit one to three are rather generic, whereas the last commit adds the actual board support.
Please don't pull any of this board support series before my "Simplify image size checks" series [1].
I inadvertently made the two series cross-dependent. I'll make the separation more clear in the next versions.
Best regards,
Philip
[1] https://patchwork.ozlabs.org/project/uboot/list/?series=468251&archive=both&state=*