clk: npcm8xx: add clock controller
Subsystems (2)
Tomer Maimon
maintainerPATCH RESEND 1/1 clk: npcm8xx: add clock controller
Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which generates and supplies clocks to all modules within the BMC.
--- drivers/clk/Kconfig | 8 + drivers/clk/Makefile | 1 + drivers/clk/clk-npcm8xx.c | 510 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 519 insertions(+) create mode 100644 drivers/clk/clk-npcm8xx.c
drivers/clk/Kconfig +8 -0
@@ -325,6 +325,14 @@ config COMMON_CLK_LOCHNAGAR This driver supports the clocking features of the Cirrus Logic Lochnagar audio development board. +config COMMON_CLK_NPCM8XX + tristate "Clock driver for the NPCM8XX SoC Family" + depends on ARCH_NPCM || COMPILE_TEST + help + This driver supports the clocks on the Nuvoton BMC NPCM8XX SoC Family, + all the clocks are initialized by the bootloader, so this driver + allows only reading of current settings directly from the hardware. + config COMMON_CLK_LOONGSON2 bool "Clock driver for Loongson-2 SoC" depends on LOONGARCH || COMPILE_TEST
drivers/clk/Makefile +1 -0
@@ -51,6 +51,7 @@ obj-$(CONFIG_ARCH_MILBEAUT_M10V) += clk-milbeaut.o obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o obj-$(CONFIG_ARCH_NPCM7XX) += clk-npcm7xx.o +obj-$(CONFIG_COMMON_CLK_NPCM8XX) += clk-npcm8xx.o obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o obj-$(CONFIG_CLK_LS1028A_PLLDIG) += clk-plldig.o
drivers/clk/clk-npcm8xx.c new file +510 -0
510 lines not on this page · raw message
Signature · 1 line
2.34.1
Andrew Jeffery
maintainerHi Tomer,
Quoted 4 lines · Tomer Maimon
Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which generates and supplies clocks to all modules within the BMC.
Signed-off-by Tomer Maimon <[email protected]>
How does this relate to the series that you've been iterating on upstream? Is this v25 of the patches?
It help me if you clarified this in the commit message (ideally with a link to the upstream series in question if it's a direct backport).
If it is v25 then there seem to be some concerns from the CI bots:
- https://lore.kernel.org/lkml/[email protected]/
- https://lore.kernel.org/lkml/[email protected]/
It looks like you also need to fix the dts to address the new constraints you've added to the binding (and also address the build failure).
Andrew
Tomer Maimon
maintainerHi Andrew,
Thanks for your reply.
I will send the NPCM8XX clock driver according to V25.
Thanks,
Tomer
Quoted 25 lines · Andrew Jeffery
Hi Tomer,
Quoted 4 lines · Tomer Maimon
Nuvoton Arbel BMC NPCM8XX contains an integrated clock controller which generates and supplies clocks to all modules within the BMC.
Signed-off-by Tomer Maimon <[email protected]>How does this relate to the series that you've been iterating on upstream? Is this v25 of the patches?
It help me if you clarified this in the commit message (ideally with a link to the upstream series in question if it's a direct backport).
If it is v25 then there seem to be some concerns from the CI bots:
- https://lore.kernel.org/lkml/[email protected]/
- https://lore.kernel.org/lkml/[email protected]/It looks like you also need to fix the dts to address the new constraints you've added to the binding (and also address the build failure).
Andrew