HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()
Subsystems (2)
PATCH RESEND v2 1/1 HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()
A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it.
Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3 [ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04 [ 13.673297] Call Trace: [ 13.673297] <TASK> [ 13.673297] dump_stack_lvl+0x5f/0x80 [ 13.673297] print_report+0xd1/0x660 [ 13.673297] kasan_report+0xe5/0x120 [ 13.673297] __asan_report_load1_noabort+0x18/0x20 [ 13.673297] mt_report_fixup+0x103/0x110 [ 13.673297] hid_open_report+0x1ef/0x810 [ 13.673297] mt_probe+0x422/0x960 [ 13.673297] hid_device_probe+0x2e2/0x6f0 [ 13.673297] really_probe+0x1c6/0x6b0 [ 13.673297] __driver_probe_device+0x24f/0x310 [ 13.673297] driver_probe_device+0x4e/0x220 [ 13.673297] __device_attach_driver+0x169/0x320 [ 13.673297] bus_for_each_drv+0x11d/0x1b0 [ 13.673297] __device_attach+0x1b8/0x3e0 [ 13.673297] device_initial_probe+0x12/0x20 [ 13.673297] bus_probe_device+0x13d/0x180 [ 13.673297] device_add+0xe3a/0x1670 [ 13.673297] hid_add_device+0x31d/0xa40
[...]
---
v2:
- Simplify fix with a if-size check after discussion with Jiri Slaby
- Change explanation of bug to reflect inclusion of a if-size check
drivers/hid/hid-multitouch.c | 8 ++++++++ 1 file changed, 8 insertions(+)
drivers/hid/hid-multitouch.c +8 -0
@@ -1503,6 +1503,14 @@ static const __u8 *mt_report_fixup(struct hid_device *hdev, __u8 *rdesc,if (hdev->vendor ==I2C_VENDOR_ID_GOODIX && (hdev->product ==I2C_DEVICE_ID_GOODIX_01E8 || hdev->product ==I2C_DEVICE_ID_GOODIX_01E9 )) { +if (*size <608 ) { +dev_info ( + &hdev->dev, +"GT7868Q fixup: report descriptor is only %u bytes, skipping\n" , + *size); +return rdesc; + } +if (rdesc[607 ] ==0x15 ) { rdesc[607 ] =0x25 ; dev_info(
Signature · 1 line
2.39.5
Quoted 39 lines · Qasim Ijaz
A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup()by passing in report descriptor smaller than 607 bytes.mt_report_fixup()attempts to patch byte offset 607 of the descriptor with0x25by first checking if byte offset 607 is0x15however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it.Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3 [ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04 [ 13.673297] Call Trace: [ 13.673297] <TASK> [ 13.673297] dump_stack_lvl+0x5f/0x80 [ 13.673297] print_report+0xd1/0x660 [ 13.673297] kasan_report+0xe5/0x120 [ 13.673297] __asan_report_load1_noabort+0x18/0x20 [ 13.673297] mt_report_fixup+0x103/0x110 [ 13.673297] hid_open_report+0x1ef/0x810 [ 13.673297] mt_probe+0x422/0x960 [ 13.673297] hid_device_probe+0x2e2/0x6f0 [ 13.673297] really_probe+0x1c6/0x6b0 [ 13.673297] __driver_probe_device+0x24f/0x310 [ 13.673297] driver_probe_device+0x4e/0x220 [ 13.673297] __device_attach_driver+0x169/0x320 [ 13.673297] bus_for_each_drv+0x11d/0x1b0 [ 13.673297] __device_attach+0x1b8/0x3e0 [ 13.673297] device_initial_probe+0x12/0x20 [ 13.673297] bus_probe_device+0x13d/0x180 [ 13.673297] device_add+0xe3a/0x1670 [ 13.673297] hid_add_device+0x31d/0xa40[...]
Quoted 8 lines
Fixes c8000deb6836 ("HID: multitouch: Add support for GT7868Q")Signed-off-by Qasim Ijaz <[email protected]>Reviewed-by Jiri Slaby <[email protected]>---
v2:
- Simplify fix with a if-size check after discussion with Jiri Slaby
- Change explanation of bug to reflect inclusion of a if-size check
Applied to hid.git#for-6.17/upstream-fixes, thanks.
Signature · 2 lines
Jiri Kosina SUSE Labs
Quoted 50 lines · Jiri Kosina
Quoted 39 lines · Qasim Ijaz
A malicious HID device can trigger a slab out-of-bounds during
mt_report_fixup()by passing in report descriptor smaller than 607 bytes.mt_report_fixup()attempts to patch byte offset 607 of the descriptor with0x25by first checking if byte offset 607 is0x15however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it.Below is the KASAN splat after the out of bounds access happens:
[ 13.671954] ================================================================== [ 13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110 [ 13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10 [ 13.673297] [ 13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3 [ 13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04 [ 13.673297] Call Trace: [ 13.673297] <TASK> [ 13.673297] dump_stack_lvl+0x5f/0x80 [ 13.673297] print_report+0xd1/0x660 [ 13.673297] kasan_report+0xe5/0x120 [ 13.673297] __asan_report_load1_noabort+0x18/0x20 [ 13.673297] mt_report_fixup+0x103/0x110 [ 13.673297] hid_open_report+0x1ef/0x810 [ 13.673297] mt_probe+0x422/0x960 [ 13.673297] hid_device_probe+0x2e2/0x6f0 [ 13.673297] really_probe+0x1c6/0x6b0 [ 13.673297] __driver_probe_device+0x24f/0x310 [ 13.673297] driver_probe_device+0x4e/0x220 [ 13.673297] __device_attach_driver+0x169/0x320 [ 13.673297] bus_for_each_drv+0x11d/0x1b0 [ 13.673297] __device_attach+0x1b8/0x3e0 [ 13.673297] device_initial_probe+0x12/0x20 [ 13.673297] bus_probe_device+0x13d/0x180 [ 13.673297] device_add+0xe3a/0x1670 [ 13.673297] hid_add_device+0x31d/0xa40[...]
Quoted 8 lines
Fixes c8000deb6836 ("HID: multitouch: Add support for GT7868Q")Signed-off-by Qasim Ijaz <[email protected]>Reviewed-by Jiri Slaby <[email protected]>---
v2:
- Simplify fix with a if-size check after discussion with Jiri Slaby
- Change explanation of bug to reflect inclusion of a if-size check
Quoted 2 lines
Applied to hid.git#for-6.17/upstream-fixes, thanks.
Thanks Jiri. Would it also be possible to review this one:
<https://lore.kernel.org/all/[email protected]/>,
I resent it but it probably got buried in your inbox.
Thanks,
Qasim
Quoted 4 lines
Signature · 2 lines
Jiri Kosina SUSE Labs
Jiri Kosina
maintainerQuoted 3 lines · Qasim Ijaz
Thanks Jiri. Would it also be possible to review this one:
<https://lore.kernel.org/all/[email protected]/>,
I resent it but it probably got buried in your inbox.
That one is still in my queue to review, in didn't fall in between cracks.
Thanks,
Signature · 2 lines
Jiri Kosina SUSE Labs