Skip to contentSkip to conversation

HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()

PATCH RESEND Applied Qasim Ijaz 2 participants 4 messages Aug 10, 2025 – Aug 12, 2025

Subsystems (2)
lore
Share & tools
lore

Qasim Ijaz

author
#0 lore raw

PATCH RESEND v2 1/1 HID: multitouch: fix slab out-of-bounds access in mt_report_fixup()

A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it.

Below is the KASAN splat after the out of bounds access happens:

[   13.671954] ==================================================================
[   13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[   13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[   13.673297]
[   13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[   13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[   13.673297] Call Trace:
[   13.673297]  <TASK>
[   13.673297]  dump_stack_lvl+0x5f/0x80
[   13.673297]  print_report+0xd1/0x660
[   13.673297]  kasan_report+0xe5/0x120
[   13.673297]  __asan_report_load1_noabort+0x18/0x20
[   13.673297]  mt_report_fixup+0x103/0x110
[   13.673297]  hid_open_report+0x1ef/0x810
[   13.673297]  mt_probe+0x422/0x960
[   13.673297]  hid_device_probe+0x2e2/0x6f0
[   13.673297]  really_probe+0x1c6/0x6b0
[   13.673297]  __driver_probe_device+0x24f/0x310
[   13.673297]  driver_probe_device+0x4e/0x220
[   13.673297]  __device_attach_driver+0x169/0x320
[   13.673297]  bus_for_each_drv+0x11d/0x1b0
[   13.673297]  __device_attach+0x1b8/0x3e0
[   13.673297]  device_initial_probe+0x12/0x20
[   13.673297]  bus_probe_device+0x13d/0x180
[   13.673297]  device_add+0xe3a/0x1670
[   13.673297]  hid_add_device+0x31d/0xa40

[...]

Fixes c8000deb6836 ("HID: multitouch: Add support for GT7868Q")

---
v2:
- Simplify fix with a if-size check after discussion with Jiri Slaby
- Change explanation of bug to reflect inclusion of a if-size check

 drivers/hid/hid-multitouch.c | 8 ++++++++
 1 file changed, 8 insertions(+)
drivers/hid/hid-multitouch.c +8 -0
index 294516a8f541..22c6314a8843 100644
@@ -1503,6 +1503,14 @@ static const __u8 *mt_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 	if (hdev->vendor == I2C_VENDOR_ID_GOODIX &&
 	    (hdev->product == I2C_DEVICE_ID_GOODIX_01E8 ||
 	     hdev->product == I2C_DEVICE_ID_GOODIX_01E9)) {
+		if (*size < 608) {
+			dev_info(
+				&hdev->dev,
+				"GT7868Q fixup: report descriptor is only %u bytes, skipping\n",
+				*size);
+			return rdesc;
+		}
+
 		if (rdesc[607] == 0x15) {
 			rdesc[607] = 0x25;
 			dev_info(
Signature · 1 line
2.39.5
maintainer Applied
#1 lore raw
Quoted 39 lines · Qasim Ijaz

A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it.

Below is the KASAN splat after the out of bounds access happens:

[   13.671954] ==================================================================
[   13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[   13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[   13.673297]
[   13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[   13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[   13.673297] Call Trace:
[   13.673297]  <TASK>
[   13.673297]  dump_stack_lvl+0x5f/0x80
[   13.673297]  print_report+0xd1/0x660
[   13.673297]  kasan_report+0xe5/0x120
[   13.673297]  __asan_report_load1_noabort+0x18/0x20
[   13.673297]  mt_report_fixup+0x103/0x110
[   13.673297]  hid_open_report+0x1ef/0x810
[   13.673297]  mt_probe+0x422/0x960
[   13.673297]  hid_device_probe+0x2e2/0x6f0
[   13.673297]  really_probe+0x1c6/0x6b0
[   13.673297]  __driver_probe_device+0x24f/0x310
[   13.673297]  driver_probe_device+0x4e/0x220
[   13.673297]  __device_attach_driver+0x169/0x320
[   13.673297]  bus_for_each_drv+0x11d/0x1b0
[   13.673297]  __device_attach+0x1b8/0x3e0
[   13.673297]  device_initial_probe+0x12/0x20
[   13.673297]  bus_probe_device+0x13d/0x180
[   13.673297]  device_add+0xe3a/0x1670
[   13.673297]  hid_add_device+0x31d/0xa40

[...]

Quoted 8 lines
Fixes c8000deb6836 ("HID: multitouch: Add support for GT7868Q")

---
v2:
- Simplify fix with a if-size check after discussion with Jiri Slaby
- Change explanation of bug to reflect inclusion of a if-size check

Applied to hid.git#for-6.17/upstream-fixes, thanks.

Signature · 2 lines
Jiri Kosina
SUSE Labs
author
#2 lore raw
Quoted 50 lines · Jiri Kosina
Quoted 39 lines · Qasim Ijaz

A malicious HID device can trigger a slab out-of-bounds during mt_report_fixup() by passing in report descriptor smaller than 607 bytes. mt_report_fixup() attempts to patch byte offset 607 of the descriptor with 0x25 by first checking if byte offset 607 is 0x15 however it lacks bounds checks to verify if the descriptor is big enough before conducting this check. Fix this bug by ensuring the descriptor size is at least 608 bytes before accessing it.

Below is the KASAN splat after the out of bounds access happens:

[   13.671954] ==================================================================
[   13.672667] BUG: KASAN: slab-out-of-bounds in mt_report_fixup+0x103/0x110
[   13.673297] Read of size 1 at addr ffff888103df39df by task kworker/0:1/10
[   13.673297]
[   13.673297] CPU: 0 UID: 0 PID: 10 Comm: kworker/0:1 Not tainted 6.15.0-00005-gec5d573d83f4-dirty #3
[   13.673297] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/04
[   13.673297] Call Trace:
[   13.673297]  <TASK>
[   13.673297]  dump_stack_lvl+0x5f/0x80
[   13.673297]  print_report+0xd1/0x660
[   13.673297]  kasan_report+0xe5/0x120
[   13.673297]  __asan_report_load1_noabort+0x18/0x20
[   13.673297]  mt_report_fixup+0x103/0x110
[   13.673297]  hid_open_report+0x1ef/0x810
[   13.673297]  mt_probe+0x422/0x960
[   13.673297]  hid_device_probe+0x2e2/0x6f0
[   13.673297]  really_probe+0x1c6/0x6b0
[   13.673297]  __driver_probe_device+0x24f/0x310
[   13.673297]  driver_probe_device+0x4e/0x220
[   13.673297]  __device_attach_driver+0x169/0x320
[   13.673297]  bus_for_each_drv+0x11d/0x1b0
[   13.673297]  __device_attach+0x1b8/0x3e0
[   13.673297]  device_initial_probe+0x12/0x20
[   13.673297]  bus_probe_device+0x13d/0x180
[   13.673297]  device_add+0xe3a/0x1670
[   13.673297]  hid_add_device+0x31d/0xa40

[...]

Quoted 8 lines
Fixes c8000deb6836 ("HID: multitouch: Add support for GT7868Q")

---
v2:
- Simplify fix with a if-size check after discussion with Jiri Slaby
- Change explanation of bug to reflect inclusion of a if-size check

Quoted 2 lines

Applied to hid.git#for-6.17/upstream-fixes, thanks.

Thanks Jiri. Would it also be possible to review this one:
<https://lore.kernel.org/all/[email protected]/>,
I resent it but it probably got buried in your inbox.

Thanks,
Qasim

Quoted 4 lines
Signature · 2 lines
Jiri Kosina
SUSE Labs
maintainer
#3 lore raw
Quoted 3 lines · Qasim Ijaz

Thanks Jiri. Would it also be possible to review this one:
<https://lore.kernel.org/all/[email protected]/>,
I resent it but it probably got buried in your inbox.

That one is still in my queue to review, in didn't fall in between cracks.

Thanks,

Signature · 2 lines
Jiri Kosina
SUSE Labs