dt-bindings: stm32: document MYD-YA15XC-T development board
Subsystems (2)
PATCH v2 1/2 dt-bindings: stm32: document MYD-YA15XC-T development board
Add new entry for MYD-YA15XC-T development board.
--- Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 7 +++++++ 1 file changed, 7 insertions(+)
Documentation/devicetree/bindings/arm/stm32/stm32.yaml +7 -0
@@ -140,6 +140,13 @@ properties: - const: engicam,microgea-stm32mp1 - const: st,stm32mp157 + - description: MyirTech STM32MP15x SoM based Boards + items: + - const: myir,myd-ya15xc-t # MYIR MYD-YA15XC-T STM32MP151C + - const: myir,myc-ya15xc-t # MYIR MYC-YA15XC-T STM32MP15X SoM + - enum: + - st,stm32mp151 + - description: Octavo OSD32MP15x System-in-Package based boards items: - enum:
Signature · 1 line
2.39.1
PATCH v2 2/2 ARM: dts: stm32: Add MyirTech MYD-YA15XC-T development board support
Add support for the MyirTech MYD-YA15XC-T development board.
General features:
- STM32MP151C
- 256MB RAM
- 2xUSB HOST
- USB-C OTG
- Gigabit ethernet
- UART
- Boot from NAND, eMMC, SD
--- arch/arm/boot/dts/st/Makefile | 1 + .../dts/st/stm32mp151c-myir-myd-ya15xc-t.dts | 460 ++++++++++++++++++ .../dts/st/stm32mp15xc-myir-myc-ya15xc-t.dtsi | 349 +++++++++++++ 3 files changed, 810 insertions(+) create mode 100644 arch/arm/boot/dts/st/stm32mp151c-myir-myd-ya15xc-t.dts create mode 100644 arch/arm/boot/dts/st/stm32mp15xc-myir-myc-ya15xc-t.dtsi
arch/arm/boot/dts/st/Makefile +1 -0
@@ -33,6 +33,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp151a-prtt1c.dtb \ stm32mp151a-prtt1s.dtb \ stm32mp151a-dhcor-testbench.dtb \ + stm32mp151c-myir-myd-ya15xc-t.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp153c-dhcor-drc-compact.dtb \ stm32mp157a-avenger96.dtb \
arch/arm/boot/dts/st/stm32mp151c-myir-myd-ya15xc-t.dts new file +460 -0
460 lines not on this page · raw message
arch/arm/boot/dts/st/stm32mp15xc-myir-myc-ya15xc-t.dtsi new file +349 -0
349 lines not on this page · raw message
Signature · 1 line
2.39.1
Quoted 12 lines · Alexander Shiyan
Add new entry for MYD-YA15XC-T development board.
Signed-off-by Alexander Shiyan <[email protected]>--- Documentation/devicetree/bindings/arm/stm32/stm32.yaml | 7 +++++++ 1 file changed, 7 insertions(+)Documentation/devicetree/bindings/arm/stm32/stm32.yaml +0
-0
Documentation/devicetree/bindings/arm/stm32/stm32.yaml properties: · line 146
Quoted 7 lines
Documentation/devicetree/bindings/arm/stm32/stm32.yaml +4
-0@@ -140,6 +140,13 @@ properties: - const: engicam,microgea-stm32mp1 - const: st,stm32mp157 + - description: MyirTech STM32MP15x SoM based Boards + items: + - const: myir,myd-ya15xc-t # MYIR MYD-YA15XC-T STM32MP151C + - const: myir,myc-ya15xc-t # MYIR MYC-YA15XC-T STM32MP15X SoM
I don't think you can have one compatible for all of them. The 153 and 157 variants differ by number of CANs, which are probably enabled in your board DTS?
Also, I cannot find ordering of 153 and 157 variants:
https://www.myirtech.com/list.asp?id=658
so I wonder if they have actually same part numbers.
Documentation/devicetree/bindings/arm/stm32/stm32.yaml properties: · line 148
Quoted 2 lines
Documentation/devicetree/bindings/arm/stm32/stm32.yaml +2
-0+ - enum: + - st,stm32mp151
This is highly unusual syntax - I think no other binding in Linux kernel uses it. It is correct and I understand why you did it, just might confuse others as we usually NAK it. I think less confusing would be to have here const (with the price of duplicating this per variant).
Best regards,
Krzysztof