arm: dts: mt7623: add missing pause for switchport
Subsystems (3)
PATCH 1/1 arm: dts: mt7623: add missing pause for switchport
From: Frank Wunderlich <[email protected]>
port6 of mt7530 switch (= cpu port 0) on bananapi-r2 misses pause option which causes rx drops on running iperf.
Fixes f4ff257cd160 ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board")
Signed-off-by Frank Wunderlich <[email protected]>
--- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 + 1 file changed, 1 insertion(+)
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +1 -0
@@ -192,6 +192,7 @@ port@6 { fixed-link { speed = <1000>; full-duplex; + pause; }; }; };
Signature · 1 line
2.25.1
just a gentle ping
regards Frank
Quoted 8 lines
Gesendet: Montag, 07. September 2020 um 09:05 Uhr
+++
b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dtsarch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +1
-0@@ -192,6 +192,7 @@ port@6 { fixed-link { speed = <1000>; full-duplex; + pause;
Quoted 8 lines · Frank Wunderlich
From: Frank Wunderlich <[email protected]>
port6 of mt7530 switch (= cpu port 0) on bananapi-r2 misses pause option which causes rx drops on running iperf.
Fixes f4ff257cd160 ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board")Signed-off-by Frank Wunderlich <[email protected]>
Applied to v5.9-next/dts32
Thanks!
Quoted 17 lines
--- arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 + 1 file changed, 1 insertion(+)arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +1
-0@@ -192,6 +192,7 @@ port@6 { fixed-link { speed = <1000>; full-duplex; + pause; }; }; };