Skip to contentSkip to conversation

arm: dts: mt7623: add missing pause for switchport

PATCH Applied Frank Wunderlich 3 participants 3 messages Sep 7, 2020 – Sep 21, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 arm: dts: mt7623: add missing pause for switchport

From: Frank Wunderlich <[email protected]>

port6 of mt7530 switch (= cpu port 0) on bananapi-r2 misses pause option which causes rx drops on running iperf.

Fixes f4ff257cd160 ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board")
---
 arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 +
 1 file changed, 1 insertion(+)
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +1 -0
index 2b760f90f38c..5375c6699843 100644
@@ -192,6 +192,7 @@ port@6 {
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
 					};
 				};
 			};
Signature · 1 line
2.25.1
#1 lore raw

just a gentle ping

regards Frank

Quoted 8 lines

Gesendet: Montag, 07. September 2020 um 09:05 Uhr

+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts

arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +1 -0
@@ -192,6 +192,7 @@ port@6 {
 					fixed-link {
 						speed = <1000>;
 						full-duplex;
+						pause;
maintainer Applied
#2 lore raw
In reply to Frank Wunderlich
Quoted 8 lines · Frank Wunderlich

From: Frank Wunderlich <[email protected]>

port6 of mt7530 switch (= cpu port 0) on bananapi-r2 misses pause option which causes rx drops on running iperf.

Fixes f4ff257cd160 ("arm: dts: mt7623: add support for Bananapi R2 (BPI-R2) board")

Applied to v5.9-next/dts32

Thanks!

Quoted 17 lines
---
  arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts | 1 +
  1 file changed, 1 insertion(+)
arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts +1 -0
index 2b760f90f38c..5375c6699843 100644
@@ -192,6 +192,7 @@ port@6 {
  					fixed-link {
  						speed = <1000>;
  						full-duplex;
+						pause;
  					};
  				};
  			};