arm64: dts: qcom: qrb2210-rb1: Drop modem support
PATCH 1/2 arm64: dts: qcom: qrb2210-rb1: Drop modem support
From: Sumit Garg <[email protected]>
QRB2210 has modem fused out as it's only available on the mobile variant which is QCM2290. So let's disable modem support from RB1.
--- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 5 ----- 1 file changed, 5 deletions(-)
arch/arm64/boot/dts/qcom/qrb2210-rb1.dts +0 -5
@@ -453,11 +453,6 @@ &remoteproc_adsp { status = "okay"; }; -&remoteproc_mpss { - firmware-name = "qcom/qcm2290/modem.mbn"; - status = "okay"; -}; - &rpm_requests { regulators { compatible = "qcom,rpm-pm2250-regulators";
Signature · 1 line
2.51.0
PATCH 2/2 arm64: dts: qcom: qrb2210-arduino-imola: Drop modem support
From: Sumit Garg <[email protected]>
QRB2210 has modem fused out as it's only available on the mobile variant which is QCM2290. So let's disable modem support from Arduino Imola/UNO-Q.
--- arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts | 6 ------ 1 file changed, 6 deletions(-)
arch/arm64/boot/dts/qcom/qrb2210-arduino-imola.dts +0 -6
@@ -343,12 +343,6 @@ &remoteproc_adsp { status = "okay"; }; -&remoteproc_mpss { - firmware-name = "qcom/qcm2290/modem.mbn"; - - status = "okay"; -}; - &rpm_requests { regulators { compatible = "qcom,rpm-pm2250-regulators";
Signature · 1 line
2.51.0
Re: [PATCH 2/2] arm64: dts: qcom: qrb2210-arduino-imola: Drop modem support
Quoted 7 lines · Sumit Garg
From: Sumit Garg <[email protected]>
QRB2210 has modem fused out as it's only available on the mobile variant which is QCM2290. So let's disable modem support from Arduino Imola/UNO-Q.
Signed-off-by Sumit Garg <[email protected]>---
On previous APQ-y SoCs, the remoteproc was still physically present and served various functions (among others, GPS, IIRC). Is that not the case?
Konrad
Re: [PATCH 2/2] arm64: dts: qcom: qrb2210-arduino-imola: Drop modem support
Quoted 11 lines · Konrad Dybcio
Quoted 7 lines · Sumit Garg
From: Sumit Garg <[email protected]>
QRB2210 has modem fused out as it's only available on the mobile variant which is QCM2290. So let's disable modem support from Arduino Imola/UNO-Q.
Signed-off-by Sumit Garg <[email protected]>---
On previous APQ-y SoCs, the remoteproc was still physically present and served various functions (among others, GPS, IIRC). Is that not the case?
That isn't the case as we hear that modem is fused out on QRB2210. Even the marketing page here [1] suggests to use add-on chip WGR7640 for GNSS.
[1] https://www.qualcomm.com/internet-of-things/products/q2-series/qrb2210
-Sumit
Re: [PATCH 2/2] arm64: dts: qcom: qrb2210-arduino-imola: Drop modem support
Quoted 10 lines · Sumit Garg
Quoted 9 lines · Konrad Dybcio
Quoted 7 lines · Sumit Garg
From: Sumit Garg <[email protected]>
QRB2210 has modem fused out as it's only available on the mobile variant which is QCM2290. So let's disable modem support from Arduino Imola/UNO-Q.
Signed-off-by Sumit Garg <[email protected]>---
Quoted 8 lines
Quoted 2 lines
On previous APQ-y SoCs, the remoteproc was still physically present and served various functions (among others, GPS, IIRC). Is that not the case?
That isn't the case as we hear that modem is fused out on QRB2210. Even the marketing page here [1] suggests to use add-on chip WGR7640 for GNSS.
[1] https://www.qualcomm.com/internet-of-things/products/q2-series/qrb2210
I would like you to provide a better source than a marketing page which does not necessarily use 'modem' in the context of 'mpss remoteproc'
The easiest test to conduct is to boot up the device and run qrtr-lookup with and without the rproc.
Or actually, if the rproc succeeds to start up, that's proof enough that it's actually there..
Konrad
Quoted 10 lines · Sumit Garg
From: Sumit Garg <[email protected]>
QRB2210 has modem fused out as it's only available on the mobile variant which is QCM2290. So let's disable modem support from RB1.
Signed-off-by Sumit Garg <[email protected]>--- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 5 ----- 1 file changed, 5 deletions(-)
No, this is not true. On QCM2290 the modem DSP is being used to download wlan firmware. As such this is wrong.
[ 4.186507] remoteproc remoteproc0: modem is available [ 14.811564] remoteproc remoteproc0: powering up modem [ 14.883766] remoteproc remoteproc0: Booting fw image qcom/qcm2290/modem.mbn, size 8881672 [ 15.505182] remoteproc remoteproc0: remote processor modem is now up
Signature · 2 lines
With best wishes Dmitry
Quoted 6 lines · Dmitry Baryshkov
Quoted 5 lines · Sumit Garg
From: Sumit Garg <[email protected]>
QRB2210 has modem fused out as it's only available on the mobile variant which is QCM2290. So let's disable modem support from RB1.
Quoted 8 lines
Quoted 5 lines
Signed-off-by Sumit Garg <[email protected]>--- arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 5 ----- 1 file changed, 5 deletions(-)No, this is not true. On QCM2290 the modem DSP is being used to download wlan firmware. As such this is wrong.
The modem is fused out as per internal PDMs communication but I can see the WLAN dependency which fails to load without modem PIL load. So let's drop this patch-set until there is proper clarity as to why WLAN has a dependency on modem firmware to be loaded.
Quoted 5 lines
[ 4.186507] remoteproc remoteproc0: modem is available [ 14.811564] remoteproc remoteproc0: powering up modem [ 14.883766] remoteproc remoteproc0: Booting fw image qcom/qcm2290/modem.mbn, size 8881672 [ 15.505182] remoteproc remoteproc0: remote processor modem is now up
-Sumit