trying to boot zedboard just to u-boot, having no luck
i've asked on the meta-xilinx mailing list, and rummaged around the
net, and have failed to do something that should be straightforward -- i want to simply boot an avnet zedboard to a recent u-boot and stop there; i have no need to go any further for the time being.
i have no problem configuring and building u-boot using:
$ make zynq_zed_defconfig
and as a test, i've tried to download any pre-built SD card images/files just to verify that the board boots, with absolutely no luck. i've formatted and re-formatted SD cards, populated them with allegedly working image files, checked and rechecked jumper settings to boot from SD card, used minicom and picocom to connect to the UART port ... all i ever see is the power LED come on, and never anything else.
if someone can point me at a recipe that is verified to work to get
u-boot up and running on this zedboard, i would be eternally grateful, because i'm running out of ideas.
rday
Signature · 7 lines
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================Quoted 18 lines · Robert P. J. Day
i've asked on the meta-xilinx mailing list, and rummaged around the
net, and have failed to do something that should be straightforward -- i want to simply boot an avnet zedboard to a recent u-boot and stop there; i have no need to go any further for the time being.i have no problem configuring and building u-boot using:
$ make zynq_zed_defconfigand as a test, i've tried to download any pre-built SD card images/files just to verify that the board boots, with absolutely no luck. i've formatted and re-formatted SD cards, populated them with allegedly working image files, checked and rechecked jumper settings to boot from SD card, used minicom and picocom to connect to the UART port ... all i ever see is the power LED come on, and never anything else.
Quoted 3 lines
if someone can point me at a recipe that is verified to work to get
u-boot up and running on this zedboard, i would be eternally grateful, because i'm running out of ideas.
I didn't try zed board for quite a long time.
You can look at images distributed via http://zedboard.org/
or petalinux bsp which should also run on zeboard.
Thanks,
Michal
Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91 w: www.monstr.eu p: +42-0-721842854 Maintainer of Linux kernel - Xilinx Microblaze Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 198 bytes Desc: OpenPGP digital signature URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190423/ac0189aa/attachment.sig>
Quoted 19 lines · Michal Simek
Quoted 18 lines · Robert P. J. Day
i've asked on the meta-xilinx mailing list, and rummaged around the
net, and have failed to do something that should be straightforward -- i want to simply boot an avnet zedboard to a recent u-boot and stop there; i have no need to go any further for the time being.i have no problem configuring and building u-boot using:
$ make zynq_zed_defconfigand as a test, i've tried to download any pre-built SD card images/files just to verify that the board boots, with absolutely no luck. i've formatted and re-formatted SD cards, populated them with allegedly working image files, checked and rechecked jumper settings to boot from SD card, used minicom and picocom to connect to the UART port ... all i ever see is the power LED come on, and never anything else.
Quoted 7 lines
Quoted 3 lines
if someone can point me at a recipe that is verified to work to get
u-boot up and running on this zedboard, i would be eternally grateful, because i'm running out of ideas.I didn't try zed board for quite a long time.
You can look at images distributed via http://zedboard.org/
or petalinux bsp which should also run on zeboard.
actually, just resolved getting SD card to boot so apologies for the
interruption ... we're good here.
rday