Skip to contentSkip to conversation

trying to boot zedboard just to u-boot, having no luck

U-Boot Robert P. J. Day 2 participants 3 messages Apr 20, 2019 – Apr 23, 2019

lore
Share & tools
lore
#0 lore raw

i've asked on the meta-xilinx mailing list, and rummaged around the
net, and have failed to do something that should be straightforward -- i want to simply boot an avnet zedboard to a recent u-boot and stop there; i have no need to go any further for the time being.

i have no problem configuring and building u-boot using:

  $ make zynq_zed_defconfig

and as a test, i've tried to download any pre-built SD card images/files just to verify that the board boots, with absolutely no luck. i've formatted and re-formatted SD cards, populated them with allegedly working image files, checked and rechecked jumper settings to boot from SD card, used minicom and picocom to connect to the UART port ... all i ever see is the power LED come on, and never anything else.

if someone can point me at a recipe that is verified to work to get
u-boot up and running on this zedboard, i would be eternally grateful, because i'm running out of ideas.

rday

Signature · 7 lines
========================================================================
Robert P. J. Day                                 Ottawa, Ontario, CANADA
                         http://crashcourse.ca

Twitter:                                       http://twitter.com/rpjday
LinkedIn:                               http://ca.linkedin.com/in/rpjday
========================================================================
#1 lore raw
Quoted 18 lines · Robert P. J. Day

i've asked on the meta-xilinx mailing list, and rummaged around the
net, and have failed to do something that should be straightforward -- i want to simply boot an avnet zedboard to a recent u-boot and stop there; i have no need to go any further for the time being.

i have no problem configuring and building u-boot using:

  $ make zynq_zed_defconfig

and as a test, i've tried to download any pre-built SD card images/files just to verify that the board boots, with absolutely no luck. i've formatted and re-formatted SD cards, populated them with allegedly working image files, checked and rechecked jumper settings to boot from SD card, used minicom and picocom to connect to the UART port ... all i ever see is the power LED come on, and never anything else.

Quoted 3 lines

if someone can point me at a recipe that is verified to work to get
u-boot up and running on this zedboard, i would be eternally grateful, because i'm running out of ideas.

I didn't try zed board for quite a long time.
You can look at images distributed via http://zedboard.org/
or petalinux bsp which should also run on zeboard.

Thanks,
Michal

Signature · 14 lines
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Xilinx Microblaze
Maintainer of Linux kernel - Xilinx Zynq ARM and ZynqMP ARM64 SoCs
U-Boot custodian - Xilinx Microblaze/Zynq/ZynqMP/Versal SoCs


-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190423/ac0189aa/attachment.sig>
#2 lore raw
Quoted 19 lines · Michal Simek
Quoted 18 lines · Robert P. J. Day

i've asked on the meta-xilinx mailing list, and rummaged around the
net, and have failed to do something that should be straightforward -- i want to simply boot an avnet zedboard to a recent u-boot and stop there; i have no need to go any further for the time being.

i have no problem configuring and building u-boot using:

  $ make zynq_zed_defconfig

and as a test, i've tried to download any pre-built SD card images/files just to verify that the board boots, with absolutely no luck. i've formatted and re-formatted SD cards, populated them with allegedly working image files, checked and rechecked jumper settings to boot from SD card, used minicom and picocom to connect to the UART port ... all i ever see is the power LED come on, and never anything else.

Quoted 7 lines
Quoted 3 lines

if someone can point me at a recipe that is verified to work to get
u-boot up and running on this zedboard, i would be eternally grateful, because i'm running out of ideas.

I didn't try zed board for quite a long time.
You can look at images distributed via http://zedboard.org/
or petalinux bsp which should also run on zeboard.

actually, just resolved getting SD card to boot so apologies for the
interruption ... we're good here.

rday