Add support for Agilex3 SoCFPGA board
cover Add support for Agilex3 SoCFPGA board
From: Niravkumar L Rabara <[email protected]>
Agilex3 SoCFPGA development kit is a low cost and small form factor development kit similar to Agilex5 013b board.
Agilex3 SoCFPGA is derived from Agilex5 SoCFPGA, with the main difference being the number of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.
This series includes:
- The addition of the Agilex3 compatible in DT bindings.
- The initial board device tree support for the Agilex3 SoCFPGA.
Note:
The patch 2 depends on the series: "Add iommu supports"
https://lore.kernel.org/all/[email protected]/
Patch series "Add iommu supports" is applied to socfpga maintainer's tree
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/log/?h=socfpga_dts_for_v6.19
Niravkumar L Rabara (2):
dt-bindings: intel: Add Agilex3 SoCFPGA board
arm64: dts: socfpga: add Agilex3 board
.../bindings/arm/intel,socfpga.yaml | 5 + arch/arm64/boot/dts/intel/Makefile | 1 + .../boot/dts/intel/socfpga_agilex3_socdk.dts | 130 ++++++++++++++++++ 3 files changed, 136 insertions(+) create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
Signature · 1 line
2.25.1
PATCH 1/2 dt-bindings: intel: Add Agilex3 SoCFPGA board
From: Niravkumar L Rabara <[email protected]>
Add compatible for Agilex3 SoCFPGA board.
--- Documentation/devicetree/bindings/arm/intel,socfpga.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +5 -0
@@ -21,6 +21,11 @@ properties: - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex + - description: Agilex3 boards + items: + - enum: + - intel,socfpga-agilex3-socdk + - const: intel,socfpga-agilex5 - description: Agilex5 boards items: - enum:
Signature · 1 line
2.25.1
Re: [PATCH 1/2] dt-bindings: intel: Add Agilex3 SoCFPGA board
Quoted 14 lines · On 10/11/2025 07:47, [email protected] wrote:
From: Niravkumar L Rabara <[email protected]>
Add compatible for Agilex3 SoCFPGA board.
Signed-off-by Niravkumar L Rabara <[email protected]>--- Documentation/devicetree/bindings/arm/intel,socfpga.yaml | 5 +++++ 1 file changed, 5 insertions(+)Documentation/devicetree/bindings/arm/intel,socfpga.yaml +0
-0
Documentation/devicetree/bindings/arm/intel,socfpga.yaml properties: · line 24
Quoted 4 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +1
-0@@ -21,6 +21,11 @@ properties: - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex + - description: Agilex3 boards
Agilex3?
Documentation/devicetree/bindings/arm/intel,socfpga.yaml properties: · line 28
Quoted 4 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +4
-0+ items: + - enum: + - intel,socfpga-agilex3-socdk + - const: intel,socfpga-agilex5
Or Agilex5? Decide. Cannot be both.
Documentation/devicetree/bindings/arm/intel,socfpga.yaml properties: · line 30
Quoted 2 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +0
-0- description: Agilex5 boards> items: - enum:
Best regards,
Krzysztof
Re: [PATCH 1/2] dt-bindings: intel: Add Agilex3 SoCFPGA board
Quoted 11 lines · Krzysztof Kozlowski
Quoted 10 lines · On 10/11/2025 07:47, [email protected] wrote:
From: Niravkumar L Rabara <[email protected]>
Add compatible for Agilex3 SoCFPGA board.
Signed-off-by Niravkumar L Rabara <[email protected]>--- Documentation/devicetree/bindings/arm/intel,socfpga.yaml | 5 +++++ 1 file changed, 5 insertions(+)
Quoted 12 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml properties: · line 24
Quoted 9 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +1
-0@@ -21,6 +21,11 @@ properties: - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex + - description: Agilex3 boardsAgilex3?
From what I understand, the Agilex3 is the same chip as the Agilex5, minus 2 CPU cores. So I recommended to Nirav, just to add the binding in the Agilex5 context.
Quoted 7 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml properties: · line 28
Quoted 4 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +4
-0+ items: + - enum: + - intel,socfpga-agilex3-socdk + - const: intel,socfpga-agilex5Or Agilex5? Decide. Cannot be both.
From the explanation above, could we document the agilex3 socdk this way?
Thanks,
Dinh
Re: [PATCH 1/2] dt-bindings: intel: Add Agilex3 SoCFPGA board
Quoted 27 lines · Dinh Nguyen
Quoted 11 lines · Krzysztof Kozlowski
Quoted 10 lines · On 10/11/2025 07:47, [email protected] wrote:
From: Niravkumar L Rabara <[email protected]>
Add compatible for Agilex3 SoCFPGA board.
Signed-off-by Niravkumar L Rabara <[email protected]>--- Documentation/devicetree/bindings/arm/intel,socfpga.yaml | 5 +++++ 1 file changed, 5 insertions(+)Quoted 12 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml properties: · line 24
Quoted 9 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +1
-0@@ -21,6 +21,11 @@ properties: - intel,socfpga-agilex-n6000 - intel,socfpga-agilex-socdk - const: intel,socfpga-agilex + - description: Agilex3 boardsAgilex3?
Quoted 3 lines
From what I understand, the Agilex3 is the same chip as the Agilex5,
minus 2 CPU cores. So I recommended to Nirav, just to add the binding in the Agilex5 context.
If that is not the same die, then probably should have still agilex3 compatible (you still can have fallback).
Quoted 6 lines
Quoted 6 lines
Quoted 5 lines
Documentation/devicetree/bindings/arm/intel,socfpga.yaml +4
-0+ items: + - enum: + - intel,socfpga-agilex3-socdk + - const: intel,socfpga-agilex5
Quoted 6 lines
Quoted 2 lines
Or Agilex5? Decide. Cannot be both.
From the explanation above, could we document the agilex3 socdk this way?
Thanks,
Dinh
Best regards,
Krzysztof
PATCH 2/2 arm64: dts: socfpga: add Agilex3 board
In reply to [email protected]From: Niravkumar L Rabara <[email protected]>
Agilex3 SoCFPGA development kit is a small form factor board similar to Agilex5 013b board.
Agilex3 SoCFPGA is derived from Agilex5 SoCFPGA, with the main difference of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.
---
Note:
This patch depends on the series: "Add iommu supports"
https://lore.kernel.org/all/[email protected]/
Patch series "Add iommu supports" is applied to socfpga maintainer's tree
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/log/?h=socfpga_dts_for_v6.19
arch/arm64/boot/dts/intel/Makefile | 1 + .../boot/dts/intel/socfpga_agilex3_socdk.dts | 130 ++++++++++++++++++ 2 files changed, 131 insertions(+) create mode 100644 arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts
arch/arm64/boot/dts/intel/Makefile +1 -0
@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \ socfpga_agilex_socdk.dtb \ socfpga_agilex_socdk_nand.dtb \ + socfpga_agilex3_socdk.dtb \ socfpga_agilex5_socdk.dtb \ socfpga_agilex5_socdk_013b.dtb \ socfpga_agilex5_socdk_nand.dtb \
arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts new file +130 -0
130 lines not on this page · raw message
Signature · 1 line
2.25.1
Re: [PATCH 2/2] arm64: dts: socfpga: add Agilex3 board
Quoted 62 lines · On 11/10/25 00:47, [email protected] wrote:
From: Niravkumar L Rabara <[email protected]>
Agilex3 SoCFPGA development kit is a small form factor board similar to Agilex5 013b board.
Agilex3 SoCFPGA is derived from Agilex5 SoCFPGA, with the main difference of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.Signed-off-by Niravkumar L Rabara <[email protected]>---
Note:
This patch depends on the series: "Add iommu supports"
https://lore.kernel.org/all/[email protected]/Patch series "Add iommu supports" is applied to socfpga maintainer's tree
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/log/?h=socfpga_dts_for_v6.19arch/arm64/boot/dts/intel/Makefile | 1 + .../boot/dts/intel/socfpga_agilex3_socdk.dts | 130 ++++++++++++++++++ 2 files changed, 131 insertions(+)create mode 100644
arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dtsarch/arm64/boot/dts/intel/Makefile +1
-0@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \ socfpga_agilex_socdk.dtb \ socfpga_agilex_socdk_nand.dtb \ + socfpga_agilex3_socdk.dtb \ socfpga_agilex5_socdk.dtb \ socfpga_agilex5_socdk_013b.dtb \ socfpga_agilex5_socdk_nand.dtb \arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts new file +23
-0@@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2025, Altera Corporation + */ +#include "socfpga_agilex5.dtsi" + +/ { + model = "SoCFPGA Agilex3 SoCDK"; + compatible = "intel,socfpga-agilex3-socdk", "intel,socfpga-agilex5"; + + aliases { + serial0 = &uart0; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led0 {
arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts line 33
Quoted 10 lines
arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts new file +10
-0+ label = "hps_led0"; + gpios = <&porta 1 GPIO_ACTIVE_HIGH>; + }; + + led1 { + label = "hps_led1"; + gpios = <&porta 12 GPIO_ACTIVE_HIGH>; + }; + + };
You need the :
cpus {
/delete-node/ cpu@2;
/delete-node/ cpu@3;
};Dinh
Re: [PATCH 2/2] arm64: dts: socfpga: add Agilex3 board
Quoted 78 lines · Dinh Nguyen
Quoted 62 lines · On 11/10/25 00:47, [email protected] wrote:
From: Niravkumar L Rabara <[email protected]>
Agilex3 SoCFPGA development kit is a small form factor board similar to Agilex5 013b board.
Agilex3 SoCFPGA is derived from Agilex5 SoCFPGA, with the main difference of CPU cores — Agilex3 has 2 cores compared to 4 in Agilex5.Signed-off-by Niravkumar L Rabara <[email protected]>---
Note:
This patch depends on the series: "Add iommu supports"
https://lore.kernel.org/all/ [email protected]/Patch series "Add iommu supports" is applied to socfpga maintainer's tree
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git/ log/?h=socfpga_dts_for_v6.19arch/arm64/boot/dts/intel/Makefile | 1 + .../boot/dts/intel/socfpga_agilex3_socdk.dts | 130 ++++++++++++++++++
2 files changed, 131 insertions(+)create mode 100644
arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dtsarch/arm64/boot/dts/intel/Makefile +1
-0@@ -2,6 +2,7 @@ dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \ socfpga_agilex_socdk.dtb \ socfpga_agilex_socdk_nand.dtb \ + socfpga_agilex3_socdk.dtb \ socfpga_agilex5_socdk.dtb \ socfpga_agilex5_socdk_013b.dtb \ socfpga_agilex5_socdk_nand.dtb \arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts new file +23
-0@@ -0,0 +1,130 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2025, Altera Corporation + */ +#include "socfpga_agilex5.dtsi" + +/ { + model = "SoCFPGA Agilex3 SoCDK"; + compatible = "intel,socfpga-agilex3-socdk", "intel,socfpga-agilex5"; + + aliases { + serial0 = &uart0; + ethernet2 = &gmac2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + led0 {arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts line 33
Quoted 10 lines
arch/arm64/boot/dts/intel/socfpga_agilex3_socdk.dts new file +10
-0+ label = "hps_led0"; + gpios = <&porta 1 GPIO_ACTIVE_HIGH>; + }; + + led1 { + label = "hps_led1"; + gpios = <&porta 12 GPIO_ACTIVE_HIGH>; + }; + + };You need the :
Quoted 7 lines
cpus {
/delete-node/ cpu@2;
/delete-node/ cpu@3;
};Dinh
I tried this way Dinh, but it doesn't work in dts, compile gives error.
/delete-node/ cpu@2;
/delete-node/ cpu@3;
works correctly.
Anyway I will send v2 patch with a socfpga_agilex3.dtsi for Agilex3 silicon which include "socfpga_agilex5.dtsi" and delete the cpu2 and cpu3 in dtsi file instead of dts.
Thanks,
Nirav