Skip to contentSkip to conversation

imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards

PATCH Superseded Ariel D'Alessandro 5 participants 11 messages Nov 23, 2021 – Feb 11, 2022

Subsystems (3)

v2 of 5 Superseded Latest is v5 →

lore
Share & tools
lore
#0 lore raw

v2 cover imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards

Changes in v2:
* Properly added MAINTAINERS entry.
* Fixed binman configuration.
* Picked device tree from kernel.
* Removed CONFIG_SPL_BUILD anti-pattern in board config.
* Removed downstream stuff in bootargs.
* Added board documentation.

Ariel D'Alessandro (1):
bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards

Michael Trimarchi (1):
imx8m: add regs used by GPMI

 arch/arm/dts/Makefile                         |   2 +
 arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi    | 423 ++++++++
 .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi  | 225 +++++
 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi    |  15 +
 arch/arm/dts/imx8mn-bsh-smm-s2.dts            |  48 +
 arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi |  15 +
 arch/arm/dts/imx8mn-bsh-smm-s2pro.dts         |  80 ++
 arch/arm/include/asm/arch-imx8m/imx-regs.h    |   7 +
 arch/arm/mach-imx/imx8m/Kconfig               |  15 +
 board/bsh/imx8mn_smm_s2/Kconfig               |  38 +
 board/bsh/imx8mn_smm_s2/MAINTAINERS           |   8 +
 board/bsh/imx8mn_smm_s2/Makefile              |  13 +
 board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c   | 941 ++++++++++++++++++
 board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c   | 941 ++++++++++++++++++
 board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c       |  23 +
 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg |  10 +
 board/bsh/imx8mn_smm_s2/spl.c                 |  93 ++
 configs/imx8mn_bsh_smm_s2_defconfig           |  92 ++
 configs/imx8mn_bsh_smm_s2pro_defconfig        |  89 ++
 doc/board/bsh/imx8mn_bsh_smm_s2.rst           |  62 ++
 doc/board/bsh/index.rst                       |   9 +
 doc/board/index.rst                           |   1 +
 include/configs/imx8mn_bsh_smm_s2.h           |  52 +
 include/configs/imx8mn_bsh_smm_s2_common.h    |  62 ++
 include/configs/imx8mn_bsh_smm_s2pro.h        |  35 +
 25 files changed, 3299 insertions(+)
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2.dts
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro.dts
 create mode 100644 board/bsh/imx8mn_smm_s2/Kconfig
 create mode 100644 board/bsh/imx8mn_smm_s2/MAINTAINERS
 create mode 100644 board/bsh/imx8mn_smm_s2/Makefile
 create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c
 create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c
 create mode 100644 board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c
 create mode 100644 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg
 create mode 100644 board/bsh/imx8mn_smm_s2/spl.c
 create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
 create mode 100644 configs/imx8mn_bsh_smm_s2pro_defconfig
 create mode 100644 doc/board/bsh/imx8mn_bsh_smm_s2.rst
 create mode 100644 doc/board/bsh/index.rst
 create mode 100644 include/configs/imx8mn_bsh_smm_s2.h
 create mode 100644 include/configs/imx8mn_bsh_smm_s2_common.h
 create mode 100644 include/configs/imx8mn_bsh_smm_s2pro.h
Signature · 1 line
2.30.2
#1 lore raw

PATCH v2 1/2 imx8m: add regs used by GPMI

From: Michael Trimarchi <[email protected]>

Add regs used by GPMI

---
 arch/arm/include/asm/arch-imx8m/imx-regs.h | 7 +++++++
 1 file changed, 7 insertions(+)
arch/arm/include/asm/arch-imx8m/imx-regs.h +7 -0
index b800da13a1..14955d1090 100644
@@ -58,6 +58,13 @@
 #define SRC_DDRC_RCR_ADDR	0x30391000
 #define SRC_DDRC2_RCR_ADDR	0x30391004
 
+#define APBH_DMA_ARB_BASE_ADDR	0x33000000
+#define APBH_DMA_ARB_END_ADDR	0x33007FFF
+#define MXS_APBH_BASE		APBH_DMA_ARB_BASE_ADDR
+
+#define MXS_GPMI_BASE		(APBH_DMA_ARB_BASE_ADDR + 0x02000)
+#define MXS_BCH_BASE		(APBH_DMA_ARB_BASE_ADDR + 0x04000)
+
 #define DDRC_DDR_SS_GPR0	0x3d000000
 #define DDRC_IPS_BASE_ADDR(X)	(0x3d400000 + ((X) * 0x2000000))
 #define DDR_CSD1_BASE_ADDR	0x40000000
Signature · 1 line
2.30.2
#3 lore raw

PATCH v2 2/2 bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards

In reply to Ariel D'Alessandro

Introduce BSH SystemMaster (SMM) S2 board family, which consists of:
iMX8MN SMM S2 and iMX8MN SMM S2 PRO boards.

Add support for iMX8MN BSH SMM S2 board:

- 256 MiB DDR3 RAM
- 512MiB Nand
- USBOTG1 peripheral - fastboot.

Add support for iMX8MN BSH SMM S2 PRO board:

- 512 MiB DDR3 RAM
- 8 GiB eMMC
- USBOTG1 peripheral - fastboot.

---
 arch/arm/dts/Makefile                         |   2 +
 arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi    | 423 ++++++++
 .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi  | 225 +++++
 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi    |  15 +
 arch/arm/dts/imx8mn-bsh-smm-s2.dts            |  48 +
 arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi |  15 +
 arch/arm/dts/imx8mn-bsh-smm-s2pro.dts         |  80 ++
 arch/arm/mach-imx/imx8m/Kconfig               |  15 +
 board/bsh/imx8mn_smm_s2/Kconfig               |  38 +
 board/bsh/imx8mn_smm_s2/MAINTAINERS           |   8 +
 board/bsh/imx8mn_smm_s2/Makefile              |  13 +
 board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c   | 941 ++++++++++++++++++
 board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c   | 941 ++++++++++++++++++
 board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c       |  23 +
 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg |  10 +
 board/bsh/imx8mn_smm_s2/spl.c                 |  93 ++
 configs/imx8mn_bsh_smm_s2_defconfig           |  92 ++
 configs/imx8mn_bsh_smm_s2pro_defconfig        |  89 ++
 doc/board/bsh/imx8mn_bsh_smm_s2.rst           |  62 ++
 doc/board/bsh/index.rst                       |   9 +
 doc/board/index.rst                           |   1 +
 include/configs/imx8mn_bsh_smm_s2.h           |  52 +
 include/configs/imx8mn_bsh_smm_s2_common.h    |  62 ++
 include/configs/imx8mn_bsh_smm_s2pro.h        |  35 +
 24 files changed, 3292 insertions(+)
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2.dts
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi
 create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro.dts
 create mode 100644 board/bsh/imx8mn_smm_s2/Kconfig
 create mode 100644 board/bsh/imx8mn_smm_s2/MAINTAINERS
 create mode 100644 board/bsh/imx8mn_smm_s2/Makefile
 create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c
 create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c
 create mode 100644 board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c
 create mode 100644 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg
 create mode 100644 board/bsh/imx8mn_smm_s2/spl.c
 create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig
 create mode 100644 configs/imx8mn_bsh_smm_s2pro_defconfig
 create mode 100644 doc/board/bsh/imx8mn_bsh_smm_s2.rst
 create mode 100644 doc/board/bsh/index.rst
 create mode 100644 include/configs/imx8mn_bsh_smm_s2.h
 create mode 100644 include/configs/imx8mn_bsh_smm_s2_common.h
 create mode 100644 include/configs/imx8mn_bsh_smm_s2pro.h
arch/arm/dts/Makefile +2 -0
index 7f622fedbd..25a3a6f713 100644
@@ -899,6 +899,8 @@ dtb-$(CONFIG_ARCH_IMX8M) += \
 	imx8mm-venice-gw7902.dtb \
 	imx8mm-verdin.dtb \
 	phycore-imx8mm.dtb \
+	imx8mn-bsh-smm-s2.dtb \
+	imx8mn-bsh-smm-s2pro.dtb \
 	imx8mn-ddr4-evk.dtb \
 	imx8mq-cm.dtb \
 	imx8mn-evk.dtb \
arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi new file +423 -0

423 lines not on this page · raw message

arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi new file +225 -0

225 lines not on this page · raw message

arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi new file +15 -0
new file mode 100644
index 0000000000..bd4da7d34c
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+#include "imx8mn-bsh-smm-s2-u-boot-common.dtsi"
+
+&pinctrl_gpmi_nand {
+	u-boot,dm-spl;
+};
+
+&gpmi {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx8mn-bsh-smm-s2.dts new file +48 -0

48 lines not on this page · raw message

arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi new file +15 -0
new file mode 100644
index 0000000000..b8396a46b8
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ * Copyright 2021 BSH Hausgeraete GmbH
+ */
+
+#include "imx8mn-bsh-smm-s2-u-boot-common.dtsi"
+
+&pinctrl_usdhc1 {
+	u-boot,dm-spl;
+};
+
+&usdhc1 {
+	u-boot,dm-spl;
+};
arch/arm/dts/imx8mn-bsh-smm-s2pro.dts new file +80 -0

80 lines not on this page · raw message

arch/arm/mach-imx/imx8m/Kconfig +15 -0
index 276b8bd974..c62f73f95f 100644
@@ -75,6 +75,20 @@ config TARGET_IMX8MM_VENICE
 	select SUPPORT_SPL
 	select IMX8M_LPDDR4
 
+config TARGET_IMX8MN_BSH_SMM_S2
+	bool "imx8mn-bsh-smm-s2"
+	select BINMAN
+	select IMX8MN
+	select SUPPORT_SPL
+	select IMX8M_DDR3L
+
+config TARGET_IMX8MN_BSH_SMM_S2PRO
+	bool "imx8mn-bsh-smm-s2pro"
+	select BINMAN
+	select IMX8MN
+	select SUPPORT_SPL
+	select IMX8M_DDR3L
+
 config TARGET_KONTRON_MX8MM
 	bool "Kontron Electronics N80xx"
 	select BINMAN
@@ -158,6 +172,7 @@ endchoice
 
 source "board/beacon/imx8mm/Kconfig"
 source "board/beacon/imx8mn/Kconfig"
+source "board/bsh/imx8mn_smm_s2/Kconfig"
 source "board/compulab/imx8mm-cl-iot-gate/Kconfig"
 source "board/engicam/imx8mm/Kconfig"
 source "board/freescale/imx8mq_evk/Kconfig"
board/bsh/imx8mn_smm_s2/Kconfig new file +38 -0
new file mode 100644
index 0000000000..37fe723e29
@@ -0,0 +1,38 @@
+config BSH_SMM_S2_DDR3L_256
+	bool "BSH SMM S2 DDR3L 256 MiB RAM support"
+
+config BSH_SMM_S2_DDR3L_512
+	bool "BSH SMM S2 DDR3L 512 MiB RAM support"
+
+config SYS_BOARD
+	default "imx8mn_smm_s2"
+
+config SYS_VENDOR
+	default "bsh"
+
+config IMX_CONFIG
+	default "board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg"
+
+if TARGET_IMX8MN_BSH_SMM_S2
+
+config SYS_CONFIG_NAME
+	default "imx8mn_bsh_smm_s2"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select BSH_SMM_S2_DDR3L_256
+
+endif
+
+if TARGET_IMX8MN_BSH_SMM_S2PRO
+
+config SYS_CONFIG_NAME
+	default "imx8mn_bsh_smm_s2pro"
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select BSH_SMM_S2_DDR3L_512
+
+endif
+
+source "board/freescale/common/Kconfig"
board/bsh/imx8mn_smm_s2/MAINTAINERS new file +8 -0
new file mode 100644
index 0000000000..1de816ca87
@@ -0,0 +1,8 @@
+ARM i.MX8MN BSH SMM S2 BOARDS
+M:	Ariel D'Alessandro <[email protected]>
+M:	Michael Trimarchi <[email protected]>
+S:	Maintained
+F:	arch/arm/dts/imx8mn-bsh-smm-s2*
+F:	board/bsh/imx8mn_smm_s2/
+F:	configs/imx8mn_bsh_smm_s2*
+F:	include/configs/imx8mn_bsh_smm_s2*
board/bsh/imx8mn_smm_s2/Makefile new file +13 -0
new file mode 100644
index 0000000000..19d37a723e
@@ -0,0 +1,13 @@
+#
+# Copyright 2021 Collabora Ltd.
+#
+# SPDX-License-Identifier:      GPL-2.0+
+#
+
+obj-y += imx8mn_smm_s2.o
+
+ifdef CONFIG_SPL_BUILD
+obj-y += spl.o
+obj-$(CONFIG_BSH_SMM_S2_DDR3L_256) += ddr3l_timing_256m.o
+obj-$(CONFIG_BSH_SMM_S2_DDR3L_512) += ddr3l_timing_512m.o
+endif
board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c new file +941 -0

941 lines not on this page · raw message

board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c new file +941 -0

941 lines not on this page · raw message

board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c new file +23 -0
new file mode 100644
index 0000000000..0ebf208be8
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 Collabora Ltd.
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <env.h>
+
+int board_init(void)
+{
+	return 0;
+}
+
+int board_late_init(void)
+{
+	if (is_usb_boot()) {
+		env_set("bootcmd", "run bootcmd_mfg");
+		env_set("bootdelay", "0");
+	}
+
+	return 0;
+}
board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg new file +10 -0
new file mode 100644
index 0000000000..2083233e50
@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 Collabora Ltd.
+ */
+
+#define __ASSEMBLY__
+
+ROM_VERSION	v2
+BOOT_FROM	sd
+LOADER		u-boot-spl-ddr.bin	0x912000
board/bsh/imx8mn_smm_s2/spl.c new file +93 -0

93 lines not on this page · raw message

configs/imx8mn_bsh_smm_s2_defconfig new file +92 -0

92 lines not on this page · raw message

configs/imx8mn_bsh_smm_s2pro_defconfig new file +89 -0

89 lines not on this page · raw message

doc/board/bsh/imx8mn_bsh_smm_s2.rst new file +62 -0

62 lines not on this page · raw message

doc/board/bsh/index.rst new file +9 -0
new file mode 100644
index 0000000000..570ee4d72e

Lines of this file are not shown. View the raw message.

doc/board/index.rst +1 -0
index 74ea33e081..148dcd0cdd 100644

Lines of this file are not shown. View the raw message.

include/configs/imx8mn_bsh_smm_s2.h new file +52 -0

52 lines not on this page · raw message

include/configs/imx8mn_bsh_smm_s2_common.h new file +62 -0

62 lines not on this page · raw message

include/configs/imx8mn_bsh_smm_s2pro.h new file +35 -0
new file mode 100644
index 0000000000..37fda66f98

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Signature · 1 line
2.30.2

Part of the diff is not shown here. View the raw message.

#4 lore raw
In reply to Ariel D'Alessandro

Gentle ping. Can we get this merged?

Quoted 62 lines · Ariel D'Alessandro

Changes in v2:
* Properly added MAINTAINERS entry.
* Fixed binman configuration.
* Picked device tree from kernel.
* Removed CONFIG_SPL_BUILD anti-pattern in board config.
* Removed downstream stuff in bootargs.
* Added board documentation.

Ariel D'Alessandro (1):
bsh: imx8mn-smm-s2/pro: Add iMX8MN BSH SMM S2 boards

Michael Trimarchi (1):
imx8m: add regs used by GPMI

  arch/arm/dts/Makefile                         |   2 +
  arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi    | 423 ++++++++
  .../dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi  | 225 +++++
  arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi    |  15 +
  arch/arm/dts/imx8mn-bsh-smm-s2.dts            |  48 +
  arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi |  15 +
  arch/arm/dts/imx8mn-bsh-smm-s2pro.dts         |  80 ++
  arch/arm/include/asm/arch-imx8m/imx-regs.h    |   7 +
  arch/arm/mach-imx/imx8m/Kconfig               |  15 +
  board/bsh/imx8mn_smm_s2/Kconfig               |  38 +
  board/bsh/imx8mn_smm_s2/MAINTAINERS           |   8 +
  board/bsh/imx8mn_smm_s2/Makefile              |  13 +
  board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c   | 941 ++++++++++++++++++
  board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c   | 941 ++++++++++++++++++
  board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c       |  23 +
  board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg |  10 +
  board/bsh/imx8mn_smm_s2/spl.c                 |  93 ++
  configs/imx8mn_bsh_smm_s2_defconfig           |  92 ++
  configs/imx8mn_bsh_smm_s2pro_defconfig        |  89 ++
  doc/board/bsh/imx8mn_bsh_smm_s2.rst           |  62 ++
  doc/board/bsh/index.rst                       |   9 +
  doc/board/index.rst                           |   1 +
  include/configs/imx8mn_bsh_smm_s2.h           |  52 +
  include/configs/imx8mn_bsh_smm_s2_common.h    |  62 ++
  include/configs/imx8mn_bsh_smm_s2pro.h        |  35 +
  25 files changed, 3299 insertions(+)

create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-common.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot-common.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2.dts create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro-u-boot.dtsi create mode 100644 arch/arm/dts/imx8mn-bsh-smm-s2pro.dts create mode 100644 board/bsh/imx8mn_smm_s2/Kconfig
create mode 100644 board/bsh/imx8mn_smm_s2/MAINTAINERS create mode 100644 board/bsh/imx8mn_smm_s2/Makefile create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_256m.c create mode 100644 board/bsh/imx8mn_smm_s2/ddr3l_timing_512m.c create mode 100644 board/bsh/imx8mn_smm_s2/imx8mn_smm_s2.c create mode 100644 board/bsh/imx8mn_smm_s2/imximage-8mn-ddr3.cfg create mode 100644 board/bsh/imx8mn_smm_s2/spl.c
create mode 100644 configs/imx8mn_bsh_smm_s2_defconfig create mode 100644 configs/imx8mn_bsh_smm_s2pro_defconfig create mode 100644 doc/board/bsh/imx8mn_bsh_smm_s2.rst create mode 100644 doc/board/bsh/index.rst
create mode 100644 include/configs/imx8mn_bsh_smm_s2.h create mode 100644 include/configs/imx8mn_bsh_smm_s2_common.h create mode 100644 include/configs/imx8mn_bsh_smm_s2pro.h

#6 lore raw

Hi Fabio

Quoted 9 lines · Fabio Estevam
Quoted 2 lines · Ariel D'Alessandro

Gentle ping. Can we get this merged?

Looks good to me:

Where will it be pick up? I will need even some followup to the patch that write the nand_bcb to avoid to use the kernel tool

Michael

#7 lore raw

Hi Tom,

Any reason why this is still pending?
Please let me know.

Thanks in advance,
Ariel

Quoted 17 lines · Michael Nazzareno Trimarchi

Hi Fabio

Quoted 9 lines · Fabio Estevam
Quoted 2 lines · Ariel D'Alessandro

Gentle ping. Can we get this merged?

Looks good to me:

Where will it be pick up? I will need even some followup to the patch that write the nand_bcb to avoid to use the kernel tool

Michael

#8 lore raw

Ping :-) Can we get this merged?

Quoted 26 lines · Ariel D'Alessandro

Hi Tom,

Any reason why this is still pending?
Please let me know.

Thanks in advance,
Ariel

Quoted 17 lines · Michael Nazzareno Trimarchi

Hi Fabio

Quoted 9 lines · Fabio Estevam
Quoted 2 lines · Ariel D'Alessandro

Gentle ping. Can we get this merged?

Looks good to me:

Where will it be pick up? I will need even some followup to the patch that write the nand_bcb to avoid to use the kernel tool

Michael

#9 lore raw
Quoted 1 line · Ariel D'Alessandro

Ping :-) Can we get this merged?

Stefano, are you working on a follow-up PR with more platforms? Thanks!

Quoted 28 lines · Ariel D'Alessandro
Quoted 26 lines

Hi Tom,

Any reason why this is still pending?
Please let me know.

Thanks in advance,
Ariel

Quoted 17 lines · Michael Nazzareno Trimarchi

Hi Fabio

Quoted 9 lines · Fabio Estevam
Quoted 2 lines · Ariel D'Alessandro

Gentle ping. Can we get this merged?

Looks good to me:

Where will it be pick up? I will need even some followup to the patch that write the nand_bcb to avoid to use the kernel tool

Michael

Signature · 1 line
Tom
#10 lore raw
Quoted 5 lines · Tom Rini
Quoted 1 line · Ariel D'Alessandro

Ping :-) Can we get this merged?

Stefano, are you working on a follow-up PR with more platforms? Thanks!

Yes, I will apply missing patches in the WE.

Regards,
Stefano

Quoted 30 lines
Quoted 29 lines · Ariel D'Alessandro
Quoted 26 lines

Hi Tom,

Any reason why this is still pending?
Please let me know.

Thanks in advance,
Ariel

Quoted 17 lines · Michael Nazzareno Trimarchi

Hi Fabio

Quoted 9 lines · Fabio Estevam
Quoted 2 lines · Ariel D'Alessandro

Gentle ping. Can we get this merged?

Looks good to me:

Where will it be pick up? I will need even some followup to the patch that write the nand_bcb to avoid to use the kernel tool

Michael

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================