arm: mvebu: Clean up Thecus N2350 board DTS
PATCH 1/1 arm: mvebu: Clean up Thecus N2350 board DTS
- Update the Thecus N2350 DTS to conform with latest device-tree binding and styles.
- Correct typo in mdio node.
Signed-off-by Tony Dinh <[email protected]>
---
arch/arm/dts/armada-385-thecus-n2350.dts | 210 +++++++++++------------ 1 file changed, 98 insertions(+), 112 deletions(-)
arch/arm/dts/armada-385-thecus-n2350.dts +98 -112
@@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1GB */ };
@@ -37,43 +37,43 @@ }; - usb3_0_phy: usb3_0_phy { + usb3_0_phy: usb-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_0_power>; + #phy-cells = <0>; }; - usb3_1_phy: usb3_1_phy { + usb3_1_phy: usb-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_1_power>; + #phy-cells = <0>; }; - gpio-keys { + keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>; pinctrl-names = "default"; - button@1 { + button-1 { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; }; - button@2 { + button-2 { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; }; - button@3 { + button-3 { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; }; }; - gpio-leds { + leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_sata1_white_led &pmx_sata1_red_led
@@ -88,142 +88,132 @@ pinctrl-names = "default"; - white_sata1 { + led-1 { label = "n2350:white:sata1"; gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ide-disk1"; }; - red_sata1 { + led-2 { label = "n2350:red:sata1"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - white-sata2 { + led-3 { label = "n2350:white:sata2"; gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; }; - red-sata2 { + led-4 { label = "n2350:red:sata2"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - white-sys { + led-5 { label = "n2350:white:sys"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - red-sys { + led-6 { label = "n2350:red:sys"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - blue-pwr { + led-7 { label = "n2350:blue:pwr"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - red-pwr { + led-8 { label = "n2350:red:pwr"; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; - white-usb { + led-9 { label = "n2350:white:usb"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - red-usb { + led-10 { label = "n2350:red:usb"; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usb3_0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB3_0_Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - - usb3_1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB3_1_Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; - }; + usb3_0_power: v5-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "USB3_0_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; - reg_sata0: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "pwr_en_sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; + usb3_1_power: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "USB3_1_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + }; - reg_5v_sata0: v5-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata0>; - }; + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; - reg_12v_sata0: v12-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata0>; - }; + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata0>; + }; - reg_sata1: regulator@4 { - regulator-name = "pwr_en_sata1"; - compatible = "regulator-fixed"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata0>; + }; - reg_5v_sata1: v5-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata1>; - }; + reg_sata1: pwr-sata0 { + regulator-name = "pwr_en_sata1"; + compatible = "regulator-fixed"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; - reg_12v_sata1: v12-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata1>; - }; + reg_5v_sata1: v5-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata1>; + }; + reg_12v_sata1: v12-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata1>; }; gpio-poweroff {
@@ -267,7 +257,7 @@ }; &mdio { - phy0: ethernet-phy@0 { + phy0: ethernet-phy@1 { reg = <1>; }; };
@@ -301,18 +291,14 @@ &pciec { status = "okay"; - /* - * The two PCIe units are accessible through - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; }; &pinctrl {
@@ -408,10 +394,10 @@ status = "okay"; /* spi: 4M Flash Macronix MX25L3205D */ - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; - compatible = "macronix,mx25l3205d", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>;
Signature · 1 line
2.39.2
Quoted 5 lines · Tony Dinh
- Update the Thecus N2350 DTS to conform with latest device-tree binding and styles.
- Correct typo in mdio node.Signed-off-by Tony Dinh <[email protected]>
Reviewed-by Stefan Roese <[email protected]>
Thanks,
Stefan
Quoted 330 lines
---
arch/arm/dts/armada-385-thecus-n2350.dts | 210 +++++++++++------------ 1 file changed, 98 insertions(+), 112 deletions(-)arch/arm/dts/armada-385-thecus-n2350.dts +96
-110@@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1GB */ };@@ -37,43 +37,43 @@ }; - usb3_0_phy: usb3_0_phy { + usb3_0_phy: usb-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_0_power>; + #phy-cells = <0>; }; - usb3_1_phy: usb3_1_phy { + usb3_1_phy: usb-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_1_power>; + #phy-cells = <0>; }; - gpio-keys { + keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>; pinctrl-names = "default"; - button@1 { + button-1 { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; }; - button@2 { + button-2 { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; }; - button@3 { + button-3 { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; }; }; - gpio-leds { + leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_sata1_white_led &pmx_sata1_red_led@@ -88,142 +88,132 @@ pinctrl-names = "default"; - white_sata1 { + led-1 { label = "n2350:white:sata1"; gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ide-disk1"; }; - red_sata1 { + led-2 { label = "n2350:red:sata1"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - white-sata2 { + led-3 { label = "n2350:white:sata2"; gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; }; - red-sata2 { + led-4 { label = "n2350:red:sata2"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - white-sys { + led-5 { label = "n2350:white:sys"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - red-sys { + led-6 { label = "n2350:red:sys"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - blue-pwr { + led-7 { label = "n2350:blue:pwr"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - red-pwr { + led-8 { label = "n2350:red:pwr"; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; - white-usb { + led-9 { label = "n2350:white:usb"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - red-usb { + led-10 { label = "n2350:red:usb"; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usb3_0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB3_0_Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - - usb3_1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB3_1_Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; - }; + usb3_0_power: v5-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "USB3_0_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; - reg_sata0: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "pwr_en_sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; + usb3_1_power: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "USB3_1_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + }; - reg_5v_sata0: v5-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata0>; - }; + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; - reg_12v_sata0: v12-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata0>; - }; + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata0>; + }; - reg_sata1: regulator@4 { - regulator-name = "pwr_en_sata1"; - compatible = "regulator-fixed"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata0>; + }; - reg_5v_sata1: v5-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata1>; - }; + reg_sata1: pwr-sata0 { + regulator-name = "pwr_en_sata1"; + compatible = "regulator-fixed"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; - reg_12v_sata1: v12-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata1>; - }; + reg_5v_sata1: v5-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata1>; + }; + reg_12v_sata1: v12-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata1>; }; gpio-poweroff {@@ -267,7 +257,7 @@ }; &mdio { - phy0: ethernet-phy@0 { + phy0: ethernet-phy@1 { reg = <1>; }; };@@ -301,18 +291,14 @@ &pciec { status = "okay"; - /* - * The two PCIe units are accessible through - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; }; &pinctrl {@@ -408,10 +394,10 @@ status = "okay";
arch/arm/dts/armada-385-thecus-n2350.dts line 403
Quoted 10 lines
arch/arm/dts/armada-385-thecus-n2350.dts +2
-2/* spi: 4M Flash Macronix MX25L3205D */ - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; - compatible = "macronix,mx25l3205d", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>;
Viele Grüße,
Stefan Roese
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
Quoted 5 lines · On Tuesday 06 June 2023 14:45:39 Tony Dinh wrote:
- Update the Thecus N2350 DTS to conform with latest device-tree binding and styles.
- Correct typo in mdio node.Signed-off-by Tony Dinh <[email protected]>
Reviewed-by Pali Rohár <[email protected]>
Quoted 343 lines
---
arch/arm/dts/armada-385-thecus-n2350.dts | 210 +++++++++++------------ 1 file changed, 98 insertions(+), 112 deletions(-)arch/arm/dts/armada-385-thecus-n2350.dts +98
-112@@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1GB */ };@@ -37,43 +37,43 @@ }; - usb3_0_phy: usb3_0_phy { + usb3_0_phy: usb-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_0_power>; + #phy-cells = <0>; }; - usb3_1_phy: usb3_1_phy { + usb3_1_phy: usb-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_1_power>; + #phy-cells = <0>; }; - gpio-keys { + keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>; pinctrl-names = "default"; - button@1 { + button-1 { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; }; - button@2 { + button-2 { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; }; - button@3 { + button-3 { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; }; }; - gpio-leds { + leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_sata1_white_led &pmx_sata1_red_led@@ -88,142 +88,132 @@ pinctrl-names = "default"; - white_sata1 { + led-1 { label = "n2350:white:sata1"; gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ide-disk1"; }; - red_sata1 { + led-2 { label = "n2350:red:sata1"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - white-sata2 { + led-3 { label = "n2350:white:sata2"; gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; }; - red-sata2 { + led-4 { label = "n2350:red:sata2"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - white-sys { + led-5 { label = "n2350:white:sys"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - red-sys { + led-6 { label = "n2350:red:sys"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - blue-pwr { + led-7 { label = "n2350:blue:pwr"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - red-pwr { + led-8 { label = "n2350:red:pwr"; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; - white-usb { + led-9 { label = "n2350:white:usb"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - red-usb { + led-10 { label = "n2350:red:usb"; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usb3_0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB3_0_Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - - usb3_1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB3_1_Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; - }; + usb3_0_power: v5-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "USB3_0_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; - reg_sata0: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "pwr_en_sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; + usb3_1_power: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "USB3_1_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + }; - reg_5v_sata0: v5-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata0>; - }; + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; - reg_12v_sata0: v12-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata0>; - }; + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata0>; + }; - reg_sata1: regulator@4 { - regulator-name = "pwr_en_sata1"; - compatible = "regulator-fixed"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata0>; + }; - reg_5v_sata1: v5-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata1>; - }; + reg_sata1: pwr-sata0 { + regulator-name = "pwr_en_sata1"; + compatible = "regulator-fixed"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; - reg_12v_sata1: v12-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata1>; - }; + reg_5v_sata1: v5-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata1>; + }; + reg_12v_sata1: v12-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata1>; }; gpio-poweroff {@@ -267,7 +257,7 @@ }; &mdio { - phy0: ethernet-phy@0 { + phy0: ethernet-phy@1 { reg = <1>; }; };@@ -301,18 +291,14 @@ &pciec { status = "okay"; - /* - * The two PCIe units are accessible through - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; }; &pinctrl {@@ -408,10 +394,10 @@ status = "okay"; /* spi: 4M Flash Macronix MX25L3205D */ - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; - compatible = "macronix,mx25l3205d", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>;Signature · 1 line
2.39.2
Quoted 5 lines · Tony Dinh
- Update the Thecus N2350 DTS to conform with latest device-tree binding and styles.
- Correct typo in mdio node.Signed-off-by Tony Dinh <[email protected]>
Applied to u-boot-marvell/master
Thanks,
Stefan
Quoted 330 lines
---
arch/arm/dts/armada-385-thecus-n2350.dts | 210 +++++++++++------------ 1 file changed, 98 insertions(+), 112 deletions(-)arch/arm/dts/armada-385-thecus-n2350.dts +96
-110@@ -23,7 +23,7 @@ stdout-path = "serial0:115200n8"; }; - memory { + memory@0 { device_type = "memory"; reg = <0x00000000 0x40000000>; /* 1GB */ };@@ -37,43 +37,43 @@ }; - usb3_0_phy: usb3_0_phy { + usb3_0_phy: usb-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_0_power>; + #phy-cells = <0>; }; - usb3_1_phy: usb3_1_phy { + usb3_1_phy: usb-phy { compatible = "usb-nop-xceiv"; vcc-supply = <&usb3_1_power>; + #phy-cells = <0>; }; - gpio-keys { + keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_power_button &pmx_copy_button &pmx_reset_button>; pinctrl-names = "default"; - button@1 { + button-1 { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; }; - button@2 { + button-2 { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; }; - button@3 { + button-3 { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>; }; }; - gpio-leds { + leds { compatible = "gpio-leds"; pinctrl-0 = <&pmx_sata1_white_led &pmx_sata1_red_led@@ -88,142 +88,132 @@ pinctrl-names = "default"; - white_sata1 { + led-1 { label = "n2350:white:sata1"; gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "ide-disk1"; }; - red_sata1 { + led-2 { label = "n2350:red:sata1"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - white-sata2 { + led-3 { label = "n2350:white:sata2"; gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>; }; - red-sata2 { + led-4 { label = "n2350:red:sata2"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - white-sys { + led-5 { label = "n2350:white:sys"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; }; - red-sys { + led-6 { label = "n2350:red:sys"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - blue-pwr { + led-7 { label = "n2350:blue:pwr"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - red-pwr { + led-8 { label = "n2350:red:pwr"; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; - white-usb { + led-9 { label = "n2350:white:usb"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - red-usb { + led-10 { label = "n2350:red:usb"; gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usb3_0_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB3_0_Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; - }; - - usb3_1_power: regulator@2 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB3_1_Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; - }; + usb3_0_power: v5-vbus0 { + compatible = "regulator-fixed"; + regulator-name = "USB3_0_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; + }; - reg_sata0: regulator@3 { - compatible = "regulator-fixed"; - regulator-name = "pwr_en_sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; - }; + usb3_1_power: v5-vbus1 { + compatible = "regulator-fixed"; + regulator-name = "USB3_1_Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 24 GPIO_ACTIVE_HIGH>; + }; - reg_5v_sata0: v5-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata0>; - }; + reg_sata0: pwr-sata0 { + compatible = "regulator-fixed"; + regulator-name = "pwr_en_sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; - reg_12v_sata0: v12-sata0 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata0"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata0>; - }; + reg_5v_sata0: v5-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata0>; + }; - reg_sata1: regulator@4 { - regulator-name = "pwr_en_sata1"; - compatible = "regulator-fixed"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; - }; + reg_12v_sata0: v12-sata0 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata0>; + }; - reg_5v_sata1: v5-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v5.0-sata1"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - vin-supply = <®_sata1>; - }; + reg_sata1: pwr-sata0 { + regulator-name = "pwr_en_sata1"; + compatible = "regulator-fixed"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>; + }; - reg_12v_sata1: v12-sata1 { - compatible = "regulator-fixed"; - regulator-name = "v12.0-sata1"; - regulator-min-microvolt = <12000000>; - regulator-max-microvolt = <12000000>; - vin-supply = <®_sata1>; - }; + reg_5v_sata1: v5-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v5.0-sata1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <®_sata1>; + }; + reg_12v_sata1: v12-sata1 { + compatible = "regulator-fixed"; + regulator-name = "v12.0-sata1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + vin-supply = <®_sata1>; }; gpio-poweroff {@@ -267,7 +257,7 @@ }; &mdio { - phy0: ethernet-phy@0 { + phy0: ethernet-phy@1 { reg = <1>; }; };@@ -301,18 +291,14 @@ &pciec { status = "okay"; - /* - * The two PCIe units are accessible through - * standard PCIe slots on the board. - */ - pcie@1,0 { - /* Port 0, Lane 0 */ - status = "okay"; - }; - pcie@2,0 { - /* Port 1, Lane 0 */ - status = "okay"; - }; +}; + +&pcie1 { + status = "okay"; +}; + +&pcie2 { + status = "okay"; }; &pinctrl {@@ -408,10 +394,10 @@ status = "okay";
arch/arm/dts/armada-385-thecus-n2350.dts line 403
Quoted 10 lines
arch/arm/dts/armada-385-thecus-n2350.dts +2
-2/* spi: 4M Flash Macronix MX25L3205D */ - spi-flash@0 { + flash@0 { #address-cells = <1>; #size-cells = <0>; - compatible = "macronix,mx25l3205d", "jedec,spi-nor"; + compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <108000000>;
Viele Grüße,
Stefan Roese
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Erika Unter HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]