Skip to contentSkip to conversation

phy: qcom,qmp: fix dt-bindings and deprecate lane suffix

PATCH Superseded Johan Hovold 5 participants 50 messages Jul 14, 2022 – Aug 30, 2022

Subsystems (3)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover phy: qcom,qmp: fix dt-bindings and deprecate lane suffix

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

Johan

Changes in v3
- rebase on linux-next which has a new binding for IPQ8074
- fix git-bisect breakage due to removal of an unused variable one patch too soon (Krzysztof)
- replace one Fixes tag with reference in commit message (Krzysztof)
- drop two redundant minItems (Krzysztof)
- fix two Fixes tags that lacked the actual tag
- add more ack and review tags from Krzysztof

Changes in v2
- squash split + cleanup + example patches (Krzysztof)
- deprecate clock-names instead of dropping suffix (Krzysztof)
- deprecate reset-names instead of dropping suffix (Krzysztof)
- flatten child reg if/then schemas (Krzysztof)
- add back optional vddp-ref-clk to all bindings even though it likely only applies to MSM8996/98 UFS (Krzysztof)
- add missing sc7180 schema to USB binding
- misc clean ups
- shorten or drop descriptions
- drop quotes around $id and $schema (Krzysztof)
- use maxItems with clock-output-names
- combine two USB clock+reset schemas
- add Reviewed-by/Acked-by tags

Johan Hovold (30):
dt-bindings: phy: qcom,qmp: fix bogus clock-cells property
dt-bindings: phy: qcom,qmp: sort compatible strings
dt-bindings: phy: qcom,qmp: drop redundant descriptions
dt-bindings: phy: qcom,qmp: fix child node description
dt-bindings: phy: qcom,qmp: clean up descriptions
dt-bindings: phy: qcom,qmp: clean up example
dt-bindings: phy: qcom,qmp: drop child-node comment
dt-bindings: phy: add qcom,msm8996-qmp-pcie-phy schema
dt-bindings: phy: qcom,msm8996-qmp-pcie: add missing child node schema
dt-bindings: phy: qcom,msm8996-qmp-pcie: deprecate PIPE clock names
dt-bindings: phy: qcom,msm8996-qmp-pcie: deprecate reset names
dt-bindings: phy: add QMP PCIe PHY schema
dt-bindings: phy: qcom,qmp-pcie: add missing child node schema
dt-bindings: phy: qcom,qmp-pcie: deprecate PIPE clock name
dt-bindings: phy: add QMP UFS PHY schema
dt-bindings: phy: qcom,qmp-ufs: add missing SM8450 clock
dt-bindings: phy: qcom,qmp-ufs: add missing SM8150 power domain
dt-bindings: phy: qcom,qmp-ufs: add missing child node schema
dt-bindings: phy: add QMP USB PHY schema
dt-bindings: phy: qcom,qmp-usb: add missing child node schema
dt-bindings: phy: qcom,qmp-usb: deprecate PIPE clock name
dt-bindings: phy: qcom,qmp-usb: add missing qcom,sc7180-qmp-usb3-phy
schema
dt-bindings: phy: qcom,qmp-usb3-dp: fix bogus clock-cells property
dt-bindings: phy: qcom,qmp-usb3-dp: deprecate USB PIPE clock name
phy: qcom-qmp-pcie: drop pipe clock lane suffix
phy: qcom-qmp-combo: drop unused lane reset
phy: qcom-qmp-combo: drop pipe clock lane suffix
phy: qcom-qmp-pcie-msm8996: drop pipe clock lane suffix
phy: qcom-qmp-pcie-msm8996: drop reset lane suffix
phy: qcom-qmp-usb: drop pipe clock lane suffix

 .../phy/qcom,msm8996-qmp-pcie-phy.yaml        | 189 +++++++
 .../bindings/phy/qcom,qmp-pcie-phy.yaml       | 296 +++++++++++
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 502 ------------------
 .../bindings/phy/qcom,qmp-ufs-phy.yaml        | 239 +++++++++
 .../bindings/phy/qcom,qmp-usb-phy.yaml        | 385 ++++++++++++++
 .../bindings/phy/qcom,qmp-usb3-dp-phy.yaml    |   8 +-
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c     |   6 +-
 .../phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c  |   8 +-
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c      |   4 +-
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c       |   4 +-
 10 files changed, 1115 insertions(+), 526 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml
Signature · 1 line
2.35.1
#1 lore raw

PATCH v3 1/30 dt-bindings: phy: qcom,qmp: fix bogus clock-cells property

The QMP PHY wrapper node is not a clock provider so drop the bogus '#clock-cells' property that was added when converting to DT schema.

Fixes ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 5 -----
 1 file changed, 5 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +0 -5
index 220788ce215f..120da190cb18 100644
@@ -67,9 +67,6 @@ properties:
       - description: Address and length of PHY's common serdes block.
       - description: Address and length of PHY's DP_COM control block.
 
-  "#clock-cells":
-    enum: [ 1, 2 ]
-
   "#address-cells":
     enum: [ 1, 2 ]
 
@@ -117,7 +114,6 @@ patternProperties:
 required:
   - compatible
   - reg
-  - "#clock-cells"
   - "#address-cells"
   - "#size-cells"
   - ranges
@@ -470,7 +466,6 @@ examples:
     usb_2_qmpphy: phy-wrapper@88eb000 {
         compatible = "qcom,sdm845-qmp-usb3-uni-phy";
         reg = <0x088eb000 0x18c>;
-        #clock-cells = <1>;
         #address-cells = <1>;
         #size-cells = <1>;
         ranges = <0x0 0x088eb000 0x2000>;
Signature · 1 line
2.35.1
#2 lore raw

PATCH v3 2/30 dt-bindings: phy: qcom,qmp: sort compatible strings

In reply to Johan Hovold

Sort the compatible strings alphabetically to make it easier to look up entries and add new ones.

---
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml        | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +6 -6
index 120da190cb18..ec4ddaef2ba9 100644
@@ -39,15 +39,18 @@ properties:
       - qcom,sdm845-qmp-ufs-phy
       - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
+      - qcom,sdx55-qmp-pcie-phy
+      - qcom,sdx55-qmp-usb3-uni-phy
+      - qcom,sdx65-qmp-usb3-uni-phy
       - qcom,sm6115-qmp-ufs-phy
       - qcom,sm6350-qmp-ufs-phy
       - qcom,sm8150-qmp-ufs-phy
       - qcom,sm8150-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-uni-phy
-      - qcom,sm8250-qmp-ufs-phy
       - qcom,sm8250-qmp-gen3x1-pcie-phy
       - qcom,sm8250-qmp-gen3x2-pcie-phy
       - qcom,sm8250-qmp-modem-pcie-phy
+      - qcom,sm8250-qmp-ufs-phy
       - qcom,sm8250-qmp-usb3-phy
       - qcom,sm8250-qmp-usb3-uni-phy
       - qcom,sm8350-qmp-ufs-phy
@@ -57,9 +60,6 @@ properties:
       - qcom,sm8450-qmp-gen4x2-pcie-phy
       - qcom,sm8450-qmp-ufs-phy
       - qcom,sm8450-qmp-usb3-phy
-      - qcom,sdx55-qmp-pcie-phy
-      - qcom,sdx55-qmp-usb3-uni-phy
-      - qcom,sdx65-qmp-usb3-uni-phy
 
   reg:
     minItems: 1
@@ -278,12 +278,12 @@ allOf:
           contains:
             enum:
               - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8180x-qmp-ufs-phy
+              - qcom,sc8280xp-qmp-ufs-phy
               - qcom,sdm845-qmp-ufs-phy
               - qcom,sm6350-qmp-ufs-phy
               - qcom,sm8150-qmp-ufs-phy
               - qcom,sm8250-qmp-ufs-phy
-              - qcom,sc8180x-qmp-ufs-phy
-              - qcom,sc8280xp-qmp-ufs-phy
     then:
       properties:
         clocks:
Signature · 1 line
2.35.1
#3 lore raw

PATCH v3 3/30 dt-bindings: phy: qcom,qmp: drop redundant descriptions

In reply to Johan Hovold

Drop the redundant supply and clock descriptions which did not add much information beyond what can be inferred from the corresponding resource names.

---
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 108 ++++--------------
 1 file changed, 25 insertions(+), 83 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +25 -83
index ec4ddaef2ba9..0359f06bc37d 100644
@@ -91,17 +91,11 @@ properties:
     minItems: 1
     maxItems: 3
 
-  vdda-phy-supply:
-    description:
-      Phandle to a regulator supply to PHY core block.
+  vdda-phy-supply: true
 
-  vdda-pll-supply:
-    description:
-      Phandle to 1.8V regulator supply to PHY refclk pll block.
+  vdda-pll-supply: true
 
-  vddp-ref-clk-supply:
-    description:
-      Phandle to a regulator supply to any specific refclk pll block.
+  vddp-ref-clk-supply: true
 
 #Required nodes:
 patternProperties:
@@ -134,11 +128,7 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
-            - description: Phy common block aux clock.
+          maxItems: 4
         clock-names:
           items:
             - const: aux
@@ -146,9 +136,7 @@ allOf:
             - const: ref
             - const: com_aux
         resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
+          maxItems: 2
         reset-names:
           items:
             - const: phy
@@ -166,19 +154,14 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
+          maxItems: 3
         clock-names:
           items:
             - const: aux
             - const: cfg_ahb
             - const: ref
         resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
+          maxItems: 2
         reset-names:
           items:
             - const: phy
@@ -195,20 +178,14 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
+          maxItems: 3
         clock-names:
           items:
             - const: aux
             - const: cfg_ahb
             - const: ref
         resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
-            - description: phy's ahb cfg block reset.
+          maxItems: 3
         reset-names:
           items:
             - const: phy
@@ -229,19 +206,14 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
+          maxItems: 3
         clock-names:
           items:
             - const: aux
             - const: cfg_ahb
             - const: ref
         resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
+          maxItems: 2
         reset-names:
           items:
             - const: phy
@@ -258,14 +230,12 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: 19.2 MHz ref clk.
+          maxItems: 1
         clock-names:
           items:
             - const: ref
         resets:
-          items:
-            - description: PHY reset in the UFS controller.
+          maxItems: 1
         reset-names:
           items:
             - const: ufsphy
@@ -287,16 +257,13 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: 19.2 MHz ref clk.
-            - description: Phy reference aux clock.
+          maxItems: 2
         clock-names:
           items:
             - const: ref
             - const: ref_aux
         resets:
-          items:
-            - description: PHY reset in the UFS controller.
+          maxItems: 1
         reset-names:
           items:
             - const: ufsphy
@@ -314,17 +281,13 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
+          maxItems: 2
         clock-names:
           items:
             - const: aux
             - const: cfg_ahb
         resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
+          maxItems: 2
         reset-names:
           items:
             - const: phy
@@ -346,11 +309,7 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Phy aux clock.
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
-            - description: Phy refgen clk.
+          maxItems: 4
         clock-names:
           items:
             - const: aux
@@ -358,8 +317,7 @@ allOf:
             - const: ref
             - const: refgen
         resets:
-          items:
-            - description: reset of phy block.
+          maxItems: 1
         reset-names:
           items:
             - const: phy
@@ -378,11 +336,7 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Phy aux clock.
-            - description: 19.2 MHz ref clk source.
-            - description: 19.2 MHz ref clk.
-            - description: Phy common block aux clock.
+          maxItems: 4
         clock-names:
           items:
             - const: aux
@@ -390,9 +344,7 @@ allOf:
             - const: ref
             - const: com_aux
         resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
+          maxItems: 2
         reset-names:
           items:
             - const: phy
@@ -410,19 +362,14 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Phy aux clock.
-            - description: 19.2 MHz ref clk.
-            - description: Phy common block aux clock.
+          maxItems: 3
         clock-names:
           items:
             - const: aux
             - const: ref_clk_src
             - const: com_aux
         resets:
-          items:
-            - description: reset of phy block.
-            - description: phy common block reset.
+          maxItems: 2
         reset-names:
           items:
             - const: phy
@@ -439,19 +386,14 @@ allOf:
     then:
       properties:
         clocks:
-          items:
-            - description: Phy config clock.
-            - description: 19.2 MHz ref clk.
-            - description: Phy common block aux clock.
+          maxItems: 3
         clock-names:
           items:
             - const: cfg_ahb
             - const: ref
             - const: com_aux
         resets:
-          items:
-            - description: phy_phy reset.
-            - description: reset of phy block.
+          maxItems: 2
         reset-names:
           items:
             - const: phy_phy
Signature · 1 line
2.35.1
#4 lore raw

PATCH v3 4/30 dt-bindings: phy: qcom,qmp: fix child node description

In reply to Johan Hovold

Fix the incorrect description of the child nodes which claimed that one node is required per lane rather than per PHY.

---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +1 -3
index 0359f06bc37d..ad52bc1c2e1b 100644
@@ -101,9 +101,7 @@ properties:
 patternProperties:
   "^phy@[0-9a-f]+$":
     type: object
-    description:
-      Each device node of QMP phy is required to have as many child nodes as
-      the number of lanes the PHY has.
+    description: one child node per PHY provided by this block
 
 required:
   - compatible
Signature · 1 line
2.35.1
#5 lore raw

PATCH v3 5/30 dt-bindings: phy: qcom,qmp: clean up descriptions

In reply to Johan Hovold

Clean up the remaining descriptions by using uppercase "PHY" consistently and dropping redundant information from the register descriptions.

---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +3 -3
index ad52bc1c2e1b..189618dedb00 100644
@@ -11,7 +11,7 @@ maintainers:
   - Vinod Koul <[email protected]>
 
 description:
-  QMP phy controller supports physical layer functionality for a number of
+  QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
 properties:
@@ -64,8 +64,8 @@ properties:
   reg:
     minItems: 1
     items:
-      - description: Address and length of PHY's common serdes block.
-      - description: Address and length of PHY's DP_COM control block.
+      - description: serdes
+      - description: DP_COM
 
   "#address-cells":
     enum: [ 1, 2 ]
Signature · 1 line
2.35.1
#6 lore raw

PATCH v3 6/30 dt-bindings: phy: qcom,qmp: clean up example

In reply to Johan Hovold

Clean up the example node somewhat by grouping consumer and provider properties in the child node.

---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +5 -2
index 189618dedb00..6269a8667a90 100644
@@ -428,10 +428,13 @@ examples:
                       <0x400 0x1fc>,
                       <0x800 0x218>,
                       <0x600 0x70>;
-                #clock-cells = <0>;
-                #phy-cells = <0>;
+
                 clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
                 clock-names = "pipe0";
+
+                #clock-cells = <0>;
                 clock-output-names = "usb3_uni_phy_pipe_clk_src";
+
+                #phy-cells = <0>;
             };
         };
Signature · 1 line
2.35.1
#7 lore raw

PATCH v3 7/30 dt-bindings: phy: qcom,qmp: drop child-node comment

In reply to Johan Hovold

Drop the redundant comment about child nodes being required that was copied from the old binding documentation.

---
 Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml | 1 -
 1 file changed, 1 deletion(-)
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +0 -1
index 6269a8667a90..693cec10d7d6 100644
@@ -97,7 +97,6 @@ properties:
 
   vddp-ref-clk-supply: true
 
-#Required nodes:
 patternProperties:
   "^phy@[0-9a-f]+$":
     type: object
Signature · 1 line
2.35.1
#8 lore raw

PATCH v3 8/30 dt-bindings: phy: add qcom,msm8996-qmp-pcie-phy schema

In reply to Johan Hovold

The QMP PHY DT schema is getting unwieldy. Break out the odd-bird msm8996-qmp-pcie-phy which is the only QMP PHY that uses separate "per-lane" nodes.

Add an example node based on a cleaned up version of msm8996.dtsi.

---
 .../phy/qcom,msm8996-qmp-pcie-phy.yaml        | 146 ++++++++++++++++++
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml |  26 ----
 2 files changed, 146 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml
Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml new file +146 -0
new file mode 100644
index 000000000000..accbcb8b5c6f
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (MSM8996 PCIe)
+
+maintainers:
+  - Vinod Koul <[email protected]>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    const: qcom,msm8996-qmp-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+
+  resets:
+    maxItems: 3
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+      - const: cfg
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: one child node per PHY provided by this block
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+    pcie_phy: phy-wrapper@34000 {
+        compatible = "qcom,msm8996-qmp-pcie-phy";
+        reg = <0x34000 0x488>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x34000 0x4000>;
+
+        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+                 <&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_CLKREF_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref";
+
+        resets = <&gcc GCC_PCIE_PHY_BCR>,
+                 <&gcc GCC_PCIE_PHY_COM_BCR>,
+                 <&gcc GCC_PCIE_PHY_COM_NOCSR_BCR>;
+        reset-names = "phy", "common", "cfg";
+
+        vdda-phy-supply = <&vreg_l28a_0p925>;
+        vdda-pll-supply = <&vreg_l12a_1p8>;
+
+        pciephy_0: phy@1000 {
+            reg = <0x1000 0x130>,
+                  <0x1200 0x200>,
+                  <0x1400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
+            clock-names = "pipe0";
+            resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+            reset-names = "lane0";
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_0_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+
+        pciephy_1: phy@2000 {
+            reg = <0x2000 0x130>,
+                  <0x2200 0x200>,
+                  <0x2400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+            clock-names = "pipe1";
+            resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+            reset-names = "lane1";
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_1_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+
+        pciephy_2: phy@3000 {
+            reg = <0x3000 0x130>,
+                  <0x3200 0x200>,
+                  <0x3400 0x1dc>;
+
+            clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
+            clock-names = "pipe2";
+            resets = <&gcc GCC_PCIE_2_PHY_BCR>;
+            reset-names = "lane2";
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_2_pipe_clk_src";
+
+            #phy-cells = <0>;
+        };
+    };
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +0 -26
index 693cec10d7d6..90d703548913 100644
@@ -22,7 +22,6 @@ properties:
       - qcom,ipq8074-qmp-gen3-pcie-phy
       - qcom,ipq8074-qmp-pcie-phy
       - qcom,ipq8074-qmp-usb3-phy
-      - qcom,msm8996-qmp-pcie-phy
       - qcom,msm8996-qmp-ufs-phy
       - qcom,msm8996-qmp-usb3-phy
       - qcom,msm8998-qmp-pcie-phy
@@ -166,31 +165,6 @@ allOf:
       required:
         - vdda-phy-supply
         - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8996-qmp-pcie-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-        resets:
-          maxItems: 3
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-            - const: cfg
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
   - if:
       properties:
         compatible:
Signature · 1 line
2.35.1
#9 lore raw

PATCH v3 9/30 dt-bindings: phy: qcom,msm8996-qmp-pcie: add missing child node schema

In reply to Johan Hovold

Add the missing the description of the PHY-provider child nodes which were ignored when converting to DT schema.

Fixes ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
---
 .../phy/qcom,msm8996-qmp-pcie-phy.yaml        | 49 +++++++++++++++++++
 1 file changed, 49 insertions(+)
Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml +49 -0
index accbcb8b5c6f..8125a91a3591 100644
@@ -57,6 +57,55 @@ patternProperties:
   "^phy@[0-9a-f]+$":
     type: object
     description: one child node per PHY provided by this block
+    properties:
+      reg:
+        items:
+          - description: TX
+          - description: RX
+          - description: PCS
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        items:
+          - enum:
+              - pipe0
+              - pipe1
+              - pipe2
+
+      resets:
+        items:
+          - description: PHY (lane) reset
+
+      reset-names:
+        items:
+          - enum:
+              - lane0
+              - lane1
+              - lane2
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+      - resets
+      - reset-names
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
 
 required:
   - compatible
Signature · 1 line
2.35.1
#10 lore raw

PATCH v3 10/30 dt-bindings: phy: qcom,msm8996-qmp-pcie: deprecate PIPE clock names

In reply to Johan Hovold

Deprecate the PHY node 'clock-names' property which specified that the PIPE clock name should have an unnecessary "lane" suffix.

---
 .../devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml   | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml +1 -4
index 8125a91a3591..b7b115e021d4 100644
@@ -69,6 +69,7 @@ patternProperties:
           - description: PIPE clock
 
       clock-names:
+        deprecated: true
         items:
           - enum:
               - pipe0
@@ -98,7 +99,6 @@ patternProperties:
     required:
       - reg
       - clocks
-      - clock-names
       - resets
       - reset-names
       - "#clock-cells"
@@ -151,7 +151,6 @@ examples:
                   <0x1400 0x1dc>;
 
             clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
-            clock-names = "pipe0";
             resets = <&gcc GCC_PCIE_0_PHY_BCR>;
             reset-names = "lane0";
 
@@ -167,7 +166,6 @@ examples:
                   <0x2400 0x1dc>;
 
             clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-            clock-names = "pipe1";
             resets = <&gcc GCC_PCIE_1_PHY_BCR>;
             reset-names = "lane1";
 
@@ -183,7 +181,6 @@ examples:
                   <0x3400 0x1dc>;
 
             clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
-            clock-names = "pipe2";
             resets = <&gcc GCC_PCIE_2_PHY_BCR>;
             reset-names = "lane2";
 
Signature · 1 line
2.35.1
#11 lore raw

PATCH v3 11/30 dt-bindings: phy: qcom,msm8996-qmp-pcie: deprecate reset names

In reply to Johan Hovold

Deprecate the PHY node 'reset-names' property which specified that the reset name should have an unnecessary "lane" suffix.

---
 .../devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-pcie-phy.yaml +2 -5
index b7b115e021d4..4e710ef75523 100644
@@ -78,9 +78,10 @@ patternProperties:
 
       resets:
         items:
-          - description: PHY (lane) reset
+          - description: PHY reset
 
       reset-names:
+        deprecated: true
         items:
           - enum:
               - lane0
@@ -100,7 +101,6 @@ patternProperties:
       - reg
       - clocks
       - resets
-      - reset-names
       - "#clock-cells"
       - clock-output-names
       - "#phy-cells"
@@ -152,7 +152,6 @@ examples:
 
             clocks = <&gcc GCC_PCIE_0_PIPE_CLK>;
             resets = <&gcc GCC_PCIE_0_PHY_BCR>;
-            reset-names = "lane0";
 
             #clock-cells = <0>;
             clock-output-names = "pcie_0_pipe_clk_src";
@@ -167,7 +166,6 @@ examples:
 
             clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
             resets = <&gcc GCC_PCIE_1_PHY_BCR>;
-            reset-names = "lane1";
 
             #clock-cells = <0>;
             clock-output-names = "pcie_1_pipe_clk_src";
@@ -182,7 +180,6 @@ examples:
 
             clocks = <&gcc GCC_PCIE_2_PIPE_CLK>;
             resets = <&gcc GCC_PCIE_2_PHY_BCR>;
-            reset-names = "lane2";
 
             #clock-cells = <0>;
             clock-output-names = "pcie_2_pipe_clk_src";
Signature · 1 line
2.35.1
#12 lore raw

PATCH v3 12/30 dt-bindings: phy: add QMP PCIe PHY schema

In reply to Johan Hovold

The QMP PHY DT schema is getting unwieldy. Break out the PCIe PHY binding in a separate file.

Add an example node based on a cleaned up version of sm8250.dtsi.

---
 .../bindings/phy/qcom,qmp-pcie-phy.yaml       | 205 ++++++++++++++++++
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml |  68 ------
 2 files changed, 205 insertions(+), 68 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml
Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml new file +205 -0
new file mode 100644
index 000000000000..84642cd53b38
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe)
+
+maintainers:
+  - Vinod Koul <[email protected]>
+
+description:
+  QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    enum:
+      - qcom,ipq6018-qmp-pcie-phy
+      - qcom,ipq8074-qmp-gen3-pcie-phy
+      - qcom,ipq8074-qmp-pcie-phy
+      - qcom,msm8998-qmp-pcie-phy
+      - qcom,sc8180x-qmp-pcie-phy
+      - qcom,sdm845-qhp-pcie-phy
+      - qcom,sdm845-qmp-pcie-phy
+      - qcom,sdx55-qmp-pcie-phy
+      - qcom,sm8250-qmp-gen3x1-pcie-phy
+      - qcom,sm8250-qmp-gen3x2-pcie-phy
+      - qcom,sm8250-qmp-modem-pcie-phy
+      - qcom,sm8450-qmp-gen3x1-pcie-phy
+      - qcom,sm8450-qmp-gen4x2-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  ranges: true
+
+  clocks:
+    minItems: 2
+    maxItems: 4
+
+  clock-names:
+    minItems: 2
+    maxItems: 4
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    maxItems: 2
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  vddp-ref-clk-supply: true
+
+patternProperties:
+  "^phy@[0-9a-f]+$":
+    type: object
+    description: single PHY-provider child node
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-pcie-phy
+              - qcom,ipq8074-qmp-gen3-pcie-phy
+              - qcom,ipq8074-qmp-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 2
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+        resets:
+          maxItems: 2
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-pcie-phy
+              - qcom,sdm845-qhp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+              - qcom,sdx55-qmp-pcie-phy
+              - qcom,sm8250-qmp-gen3x1-pcie-phy
+              - qcom,sm8250-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-modem-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen4x2-pcie-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: refgen
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: phy
+      required:
+        - vdda-phy-supply
+        - vdda-pll-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
+    phy-wrapper@1c0e000 {
+        compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
+        reg = <0x01c0e000 0x1c0>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x01c0e000 0x1000>;
+
+        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+                 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
+                 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
+        clock-names = "aux", "cfg_ahb", "ref", "refgen";
+
+        resets = <&gcc GCC_PCIE_1_PHY_BCR>;
+        reset-names = "phy";
+
+        vdda-phy-supply = <&vreg_l10c_0p88>;
+        vdda-pll-supply = <&vreg_l6b_1p2>;
+
+        phy@200 {
+            reg = <0x200 0x170>,
+                  <0x400 0x200>,
+                  <0xa00 0x1f0>,
+                  <0x600 0x170>,
+                  <0x800 0x200>,
+                  <0xe00 0xf4>;
+
+            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+            clock-names = "pipe0";
+
+            #clock-cells = <0>;
+            clock-output-names = "pcie_1_pipe_clk";
+
+            #phy-cells = <0>;
+        };
+    };
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +0 -68

112 lines not on this page · raw message

Signature · 1 line
2.35.1
#13 lore raw

PATCH v3 13/30 dt-bindings: phy: qcom,qmp-pcie: add missing child node schema

In reply to Johan Hovold

Add the missing the description of the PHY-provider child node which was ignored when converting to DT schema.

Fixes ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
---
 .../bindings/phy/qcom,qmp-pcie-phy.yaml       | 92 +++++++++++++++++++
 1 file changed, 92 insertions(+)
Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml +92 -0
index 84642cd53b38..5466a6d35e2a 100644
@@ -68,6 +68,37 @@ patternProperties:
   "^phy@[0-9a-f]+$":
     type: object
     description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        items:
+          - const: pipe0
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
 
 required:
   - compatible
@@ -164,6 +195,67 @@ allOf:
         - vdda-phy-supply
         - vdda-pll-supply
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-modem-pcie-phy
+              - qcom,sm8450-qmp-gen4x2-pcie-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+              - qcom,sdx55-qmp-pcie-phy
+              - qcom,sm8250-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-pcie-phy
+              - qcom,ipq8074-qmp-pcie-phy
+              - qcom,msm8998-qmp-pcie-phy
+              - qcom,sdm845-qhp-pcie-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sm8250.h>
Signature · 1 line
2.35.1
#14 lore raw

PATCH v3 14/30 dt-bindings: phy: qcom,qmp-pcie: deprecate PIPE clock name

In reply to Johan Hovold

Deprecate the PHY node 'clock-names' property which specified that the PIPE clock name should have a bogus "lane" suffix.

---
 Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-pcie-phy.yaml +1 -2
index 5466a6d35e2a..324ad7d03a38 100644
@@ -78,6 +78,7 @@ patternProperties:
           - description: PIPE clock
 
       clock-names:
+        deprecated: true
         items:
           - const: pipe0
 
@@ -93,7 +94,6 @@ patternProperties:
     required:
       - reg
       - clocks
-      - clock-names
       - "#clock-cells"
       - clock-output-names
       - "#phy-cells"
@@ -287,7 +287,6 @@ examples:
                   <0xe00 0xf4>;
 
             clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
-            clock-names = "pipe0";
 
             #clock-cells = <0>;
             clock-output-names = "pcie_1_pipe_clk";
Signature · 1 line
2.35.1
#15 lore raw

PATCH v3 15/30 dt-bindings: phy: add QMP UFS PHY schema

In reply to Johan Hovold

The QMP PHY DT schema is getting unwieldy. Break out the UFS PHY binding in a separate file.

Add an example node based on a cleaned up version of sc8280xp.dtsi.

---
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml |  60 -------
 .../bindings/phy/qcom,qmp-ufs-phy.yaml        | 148 ++++++++++++++++++
 2 files changed, 148 insertions(+), 60 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml
Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +0 -60
index 897dcd4f7dc9..21d6ec875529 100644
@@ -19,32 +19,21 @@ properties:
     enum:
       - qcom,ipq6018-qmp-usb3-phy
       - qcom,ipq8074-qmp-usb3-phy
-      - qcom,msm8996-qmp-ufs-phy
       - qcom,msm8996-qmp-usb3-phy
-      - qcom,msm8998-qmp-ufs-phy
       - qcom,msm8998-qmp-usb3-phy
       - qcom,qcm2290-qmp-usb3-phy
       - qcom,sc7180-qmp-usb3-phy
-      - qcom,sc8180x-qmp-ufs-phy
       - qcom,sc8180x-qmp-usb3-phy
-      - qcom,sc8280xp-qmp-ufs-phy
-      - qcom,sdm845-qmp-ufs-phy
       - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
       - qcom,sdx65-qmp-usb3-uni-phy
-      - qcom,sm6115-qmp-ufs-phy
-      - qcom,sm6350-qmp-ufs-phy
-      - qcom,sm8150-qmp-ufs-phy
       - qcom,sm8150-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-uni-phy
-      - qcom,sm8250-qmp-ufs-phy
       - qcom,sm8250-qmp-usb3-phy
       - qcom,sm8250-qmp-usb3-uni-phy
-      - qcom,sm8350-qmp-ufs-phy
       - qcom,sm8350-qmp-usb3-phy
       - qcom,sm8350-qmp-usb3-uni-phy
-      - qcom,sm8450-qmp-ufs-phy
       - qcom,sm8450-qmp-usb3-phy
 
   reg:
@@ -178,55 +167,6 @@ allOf:
       required:
         - vdda-phy-supply
         - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8996-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 1
-        clock-names:
-          items:
-            - const: ref
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: ufsphy
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8998-qmp-ufs-phy
-              - qcom,sc8180x-qmp-ufs-phy
-              - qcom,sc8280xp-qmp-ufs-phy
-              - qcom,sdm845-qmp-ufs-phy
-              - qcom,sm6350-qmp-ufs-phy
-              - qcom,sm8150-qmp-ufs-phy
-              - qcom,sm8250-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 2
-        clock-names:
-          items:
-            - const: ref
-            - const: ref_aux
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: ufsphy
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
   - if:
       properties:
         compatible:
Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml new file +148 -0

148 lines not on this page · raw message

Signature · 1 line
2.35.1
#16 lore raw

PATCH v3 16/30 dt-bindings: phy: qcom,qmp-ufs: add missing SM8450 clock

In reply to Johan Hovold

Add the missing "qref" clock used by the SM8450 UFS QMP PHY to the binding.

Note that the "qref" clock was added to sm8450.dtsi by commit 07fa917a335e ("arm64: dts: qcom: sm8450: add ufs nodes") but the binding was never updated to match.

Fixes e04121ba1b08 ("dt-bindings: phy: qcom,qmp: Add SM8450 UFS phy compatible")
---
 .../bindings/phy/qcom,qmp-ufs-phy.yaml        | 20 +++++++++++++++++--
 1 file changed, 18 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml +18 -2
index e9dfed29e996..7a1f80e2cf23 100644
@@ -42,11 +42,11 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   clock-names:
     minItems: 1
-    maxItems: 2
+    maxItems: 3
 
   resets:
     maxItems: 1
@@ -117,6 +117,22 @@ allOf:
             - const: ref
             - const: ref_aux
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8450-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 3
+        clock-names:
+          items:
+            - const: ref
+            - const: ref_aux
+            - const: qref
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
Signature · 1 line
2.35.1
#17 lore raw

PATCH v3 17/30 dt-bindings: phy: qcom,qmp-ufs: add missing SM8150 power domain

In reply to Johan Hovold

Add the missing optional power-domains property used by the SM8150 UFS QMP PHY to the binding.

Fixes fe75b0c4a691 ("arm64: dts: qcom: sm8150: Add ufs power-domain entries")
---
 Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml | 3 +++
 1 file changed, 3 insertions(+)
Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml +3 -0
index 7a1f80e2cf23..0e76256e5636 100644
@@ -48,6 +48,9 @@ properties:
     minItems: 1
     maxItems: 3
 
+  power-domains:
+    maxItems: 1
+
   resets:
     maxItems: 1
 
Signature · 1 line
2.35.1
#18 lore raw

PATCH v3 18/30 dt-bindings: phy: qcom,qmp-ufs: add missing child node schema

In reply to Johan Hovold

Add the missing the description of the PHY-provider child node which was ignored when converting to DT schema.

Fixes ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
---
 .../bindings/phy/qcom,qmp-ufs-phy.yaml        | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)
Documentation/devicetree/bindings/phy/qcom,qmp-ufs-phy.yaml +72 -0
index 0e76256e5636..6e3c186b9972 100644
@@ -68,6 +68,19 @@ patternProperties:
   "^phy@[0-9a-f]+$":
     type: object
     description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - "#phy-cells"
+
+    additionalProperties: false
 
 required:
   - compatible
@@ -136,6 +149,65 @@ allOf:
             - const: ref_aux
             - const: qref
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8280xp-qmp-ufs-phy
+              - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm6350-qmp-ufs-phy
+              - qcom,sm8150-qmp-ufs-phy
+              - qcom,sm8250-qmp-ufs-phy
+              - qcom,sm8350-qmp-ufs-phy
+              - qcom,sm8450-qmp-ufs-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8180x-qmp-ufs-phy
+              - qcom,sm6115-qmp-ufs-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sc8280xp.h>
Signature · 1 line
2.35.1
#19 lore raw

PATCH v3 19/30 dt-bindings: phy: add QMP USB PHY schema

In reply to Johan Hovold

The QMP PHY DT schema is getting unwieldy. Break out the USB PHY binding in a separate file.

---
 ...com,qmp-phy.yaml => qcom,qmp-usb-phy.yaml} | 67 +++++--------------
 1 file changed, 16 insertions(+), 51 deletions(-)
 rename Documentation/devicetree/bindings/phy/{qcom,qmp-phy.yaml => qcom,qmp-usb-phy.yaml} (82%)
Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml renamed from Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml +16 -51
similarity index 82%
rename from Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
rename to Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml
index 21d6ec875529..430b34eae7bd 100644
@@ -1,11 +1,10 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
 %YAML 1.2
 ---
-$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+$id: http://devicetree.org/schemas/phy/qcom,qmp-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm QMP PHY controller
+title: Qualcomm QMP PHY controller (USB)
 
 maintainers:
   - Vinod Koul <[email protected]>
@@ -51,20 +50,18 @@ properties:
   ranges: true
 
   clocks:
-    minItems: 1
+    minItems: 3
     maxItems: 4
 
   clock-names:
-    minItems: 1
+    minItems: 3
     maxItems: 4
 
   resets:
-    minItems: 1
-    maxItems: 3
+    maxItems: 2
 
   reset-names:
-    minItems: 1
-    maxItems: 3
+    maxItems: 2
 
   vdda-phy-supply: true
 
@@ -75,7 +72,7 @@ properties:
 patternProperties:
   "^phy@[0-9a-f]+$":
     type: object
-    description: one child node per PHY provided by this block
+    description: single PHY-provider child node
 
 required:
   - compatible
@@ -87,6 +84,8 @@ required:
   - clock-names
   - resets
   - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
 
 additionalProperties: false
 
@@ -113,34 +112,7 @@ allOf:
           items:
             - const: phy
             - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdx55-qmp-usb3-uni-phy
-              - qcom,sdx65-qmp-usb3-uni-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-        resets:
-          maxItems: 2
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
+
   - if:
       properties:
         compatible:
@@ -149,6 +121,8 @@ allOf:
               - qcom,ipq8074-qmp-usb3-phy
               - qcom,msm8996-qmp-usb3-phy
               - qcom,msm8998-qmp-usb3-phy
+              - qcom,sdx55-qmp-usb3-uni-phy
+              - qcom,sdx65-qmp-usb3-uni-phy
     then:
       properties:
         clocks:
@@ -164,9 +138,7 @@ allOf:
           items:
             - const: phy
             - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
+
   - if:
       properties:
         compatible:
@@ -192,9 +164,7 @@ allOf:
           items:
             - const: phy
             - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
+
   - if:
       properties:
         compatible:
@@ -217,9 +187,7 @@ allOf:
           items:
             - const: phy
             - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
+
   - if:
       properties:
         compatible:
@@ -241,9 +209,6 @@ allOf:
           items:
             - const: phy_phy
             - const: phy
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
 
 examples:
   - |
Signature · 1 line
2.35.1
#20 lore raw

PATCH v3 20/30 dt-bindings: phy: qcom,qmp-usb: add missing child node schema

In reply to Johan Hovold

Add the missing the description of the PHY-provider child node which was ignored when converting to DT schema.

Fixes ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")
---
 .../bindings/phy/qcom,qmp-usb-phy.yaml        | 114 ++++++++++++++++++
 1 file changed, 114 insertions(+)
Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml +114 -0
index 430b34eae7bd..883ee7cb23d5 100644
@@ -73,6 +73,37 @@ patternProperties:
   "^phy@[0-9a-f]+$":
     type: object
     description: single PHY-provider child node
+    properties:
+      reg:
+        minItems: 3
+        maxItems: 6
+
+      clocks:
+        items:
+          - description: PIPE clock
+
+      clock-names:
+        items:
+          - const: pipe0
+
+      "#clock-cells":
+        const: 0
+
+      clock-output-names:
+        maxItems: 1
+
+      "#phy-cells":
+        const: 0
+
+    required:
+      - reg
+      - clocks
+      - clock-names
+      - "#clock-cells"
+      - clock-output-names
+      - "#phy-cells"
+
+    additionalProperties: false
 
 required:
   - compatible
@@ -210,6 +241,89 @@ allOf:
             - const: phy_phy
             - const: phy
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sdm845-qmp-usb3-phy
+              - qcom,sm8150-qmp-usb3-phy
+              - qcom,sm8350-qmp-usb3-phy
+              - qcom,sm8450-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX lane 1
+                - description: RX lane 1
+                - description: PCS
+                - description: TX lane 2
+                - description: RX lane 2
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,ipq6018-qmp-usb3-phy
+              - qcom,ipq8074-qmp-usb3-phy
+              - qcom,qcm2290-qmp-usb3-phy
+              - qcom,sc7180-qmp-usb3-phy
+              - qcom,sc8180x-qmp-usb3-phy
+              - qcom,sdx55-qmp-usb3-uni-phy
+              - qcom,sdx65-qmp-usb3-uni-phy
+              - qcom,sm8150-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+                - description: PCS_MISC
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-usb3-phy
+              - qcom,sm8250-qmp-usb3-uni-phy
+              - qcom,sm8350-qmp-usb3-uni-phy
+    then:
+      patternProperties:
+        "^phy@[0-9a-f]+$":
+          properties:
+            reg:
+              items:
+                - description: TX
+                - description: RX
+                - description: PCS
+
 examples:
   - |
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
Signature · 1 line
2.35.1
Reviewed-by on v3 20/30
#21 lore raw

Re: [PATCH v3 20/30] dt-bindings: phy: qcom,qmp-usb: add missing child node schema

Quoted 5 lines · Johan Hovold

Add the missing the description of the PHY-provider child node which was ignored when converting to DT schema.

Fixes ccf51c1cedfd ("dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml")

I think you missed my tag here.

Best regards,
Krzysztof

Signature · 3 lines
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
#22 lore raw

PATCH v3 21/30 dt-bindings: phy: qcom,qmp-usb: deprecate PIPE clock name

In reply to Johan Hovold

Deprecate the PHY node 'clock-names' property which specified that the PIPE clock name should have a bogus "lane" suffix.

---
 Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml +1 -2
index 883ee7cb23d5..604d22f47a56 100644
@@ -83,6 +83,7 @@ patternProperties:
           - description: PIPE clock
 
       clock-names:
+        deprecated: true
         items:
           - const: pipe0
 
@@ -98,7 +99,6 @@ patternProperties:
     required:
       - reg
       - clocks
-      - clock-names
       - "#clock-cells"
       - clock-output-names
       - "#phy-cells"
@@ -354,7 +354,6 @@ examples:
                       <0x600 0x70>;
 
                 clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>;
-                clock-names = "pipe0";
 
                 #clock-cells = <0>;
                 clock-output-names = "usb3_uni_phy_pipe_clk_src";
Signature · 1 line
2.35.1
#23 lore raw

PATCH v3 22/30 dt-bindings: phy: qcom,qmp-usb: add missing qcom,sc7180-qmp-usb3-phy schema

In reply to Johan Hovold

The "qcom,sc7180-qmp-usb3-phy" compatible is apparently used to describe a combo PHY where only the USB part is used. Specifically, only a single reset is used.

Fixes 4ad7d7eeed3a ("dt-bindings: phy: qcom,qmp-usb3-dp: Add support for SC7180")
Fixes 94c34600b617 ("dt-bindings: phy: qcom,qmp-usb3-dp-phy: move usb3 compatibles back to qcom,qmp-phy.yaml")
---
 .../bindings/phy/qcom,qmp-usb-phy.yaml        | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)
Documentation/devicetree/bindings/phy/qcom,qmp-usb-phy.yaml +22 -0
index 604d22f47a56..472a5ef029d5 100644
@@ -121,6 +121,28 @@ required:
 additionalProperties: false
 
 allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc7180-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          items:
+            - const: aux
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          maxItems: 1
+        reset-names:
+          items:
+            - const: phy
+
   - if:
       properties:
         compatible:
Signature · 1 line
2.35.1
#24 lore raw

PATCH v3 23/30 dt-bindings: phy: qcom,qmp-usb3-dp: fix bogus clock-cells property

In reply to Johan Hovold

The QMP PHY wrapper node is not a clock provider so drop the bogus '#clock-cells' property that was added when converting to DT schema.

Fixes 59351049ad15 ("dt-bindings: phy: qcom,qmp-usb3-dp: Add dt bindings for USB3 DP PHY")
---
 .../devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml        | 5 -----
 1 file changed, 5 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +0 -5
index b078009ed509..d8bfdbd6d9cf 100644
@@ -30,9 +30,6 @@ properties:
       - const: dp_com
       - const: dp
 
-  "#clock-cells":
-    enum: [ 1, 2 ]
-
   "#address-cells":
     enum: [ 1, 2 ]
 
@@ -147,7 +144,6 @@ patternProperties:
 required:
   - compatible
   - reg
-  - "#clock-cells"
   - "#address-cells"
   - "#size-cells"
   - ranges
@@ -169,7 +165,6 @@ examples:
               <0x088e8000 0x10>,
               <0x088ea000 0x40>;
         reg-names = "usb", "dp_com", "dp";
-        #clock-cells = <1>;
         #address-cells = <1>;
         #size-cells = <1>;
         ranges = <0x0 0x088e9000 0x2000>;
Signature · 1 line
2.35.1
#25 lore raw

PATCH v3 24/30 dt-bindings: phy: qcom,qmp-usb3-dp: deprecate USB PIPE clock name

In reply to Johan Hovold

Deprecate the USB PHY node 'clock-names' property which specified that the PIPE clock name should have a bogus "lane" suffix.

---
 .../devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml          | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml +1 -2
index d8bfdbd6d9cf..5df78e3b4d8a 100644
@@ -96,6 +96,7 @@ patternProperties:
           - description: pipe clock
 
       clock-names:
+        deprecated: true
         items:
           - const: pipe0
 
@@ -112,7 +113,6 @@ patternProperties:
     required:
       - reg
       - clocks
-      - clock-names
       - '#clock-cells'
       - '#phy-cells'
 
@@ -192,7 +192,6 @@ examples:
             #clock-cells = <0>;
             #phy-cells = <0>;
             clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-            clock-names = "pipe0";
             clock-output-names = "usb3_phy_pipe_clk_src";
         };
 
Signature · 1 line
2.35.1
#26 lore raw

PATCH v3 25/30 phy: qcom-qmp-pcie: drop pipe clock lane suffix

In reply to Johan Hovold

The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name.

Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index.

---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/phy/qualcomm/phy-qcom-qmp-pcie.c +1 -3
index 2d65e1f56bfc..3ddbb8e89f04 100644
@@ -2314,7 +2314,6 @@ int qcom_qmp_phy_pcie_create(struct device *dev, struct device_node *np, int id,
 	struct qcom_qmp *qmp = dev_get_drvdata(dev);
 	struct phy *generic_phy;
 	struct qmp_phy *qphy;
-	char prop_name[MAX_PROP_NAME];
 	int ret;
 
 	qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
@@ -2374,8 +2373,7 @@ int qcom_qmp_phy_pcie_create(struct device *dev, struct device_node *np, int id,
 	if (!qphy->pcs_misc)
 		dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
 
-	snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
-	qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
+	qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
 	if (IS_ERR(qphy->pipe_clk)) {
 		return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
 				     "failed to get lane%d pipe clock\n", id);
Signature · 1 line
2.35.1
Reviewed-by on v3 25/30
#27 lore raw

Re: [PATCH v3 25/30] phy: qcom-qmp-pcie: drop pipe clock lane suffix

Quoted 8 lines · Johan Hovold

The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name.

Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index.

Quoted 3 lines
---
  drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 4 +---
  1 file changed, 1 insertion(+), 3 deletions(-)
Signature · 2 lines
With best wishes
Dmitry
#28 lore raw

PATCH v3 26/30 phy: qcom-qmp-combo: drop unused lane reset

In reply to Johan Hovold

Drop the unused lane reset pointer which isn't used by any combo PHY.

---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 2 --
 1 file changed, 2 deletions(-)
drivers/phy/qualcomm/phy-qcom-qmp-combo.c +0 -2
index 05b7d694de1f..faa50cf2e35e 100644
@@ -838,7 +838,6 @@ struct qmp_phy_combo_cfg {
  * @pipe_clk: pipe clock
  * @index: lane index
  * @qmp: QMP phy to which this lane belongs
- * @lane_rst: lane's reset controller
  * @mode: current PHY mode
  * @dp_aux_cfg: Display port aux config
  * @dp_opts: Display port optional config
@@ -858,7 +857,6 @@ struct qmp_phy {
 	struct clk *pipe_clk;
 	unsigned int index;
 	struct qcom_qmp *qmp;
-	struct reset_control *lane_rst;
 	enum phy_mode mode;
 	unsigned int dp_aux_cfg;
 	struct phy_configure_opts_dp dp_opts;
Signature · 1 line
2.35.1
#29 lore raw

PATCH v3 27/30 phy: qcom-qmp-combo: drop pipe clock lane suffix

In reply to Johan Hovold

The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name.

Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index.

---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/phy/qualcomm/phy-qcom-qmp-combo.c +1 -3
index faa50cf2e35e..fcb5c375425b 100644
@@ -2533,7 +2533,6 @@ int qcom_qmp_phy_combo_create(struct device *dev, struct device_node *np, int id
 	struct phy *generic_phy;
 	struct qmp_phy *qphy;
 	const struct phy_ops *ops;
-	char prop_name[MAX_PROP_NAME];
 	int ret;
 
 	qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
@@ -2599,8 +2598,7 @@ int qcom_qmp_phy_combo_create(struct device *dev, struct device_node *np, int id
 	 * Otherwise, we initialize pipe clock to NULL for
 	 * all phys that don't need this.
 	 */
-	snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
-	qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
+	qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
 	if (IS_ERR(qphy->pipe_clk)) {
 		if (cfg->type == PHY_TYPE_USB3) {
 			ret = PTR_ERR(qphy->pipe_clk);
Signature · 1 line
2.35.1
Reviewed-by on v3 27/30
#30 lore raw

Re: [PATCH v3 27/30] phy: qcom-qmp-combo: drop pipe clock lane suffix

Quoted 8 lines · Johan Hovold

The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name.

Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index.

Quoted 4 lines
---
  drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 4 +---
  1 file changed, 1 insertion(+), 3 deletions(-)
Signature · 7 lines
With best wishes
Dmitry

-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
#31 lore raw

PATCH v3 28/30 phy: qcom-qmp-pcie-msm8996: drop pipe clock lane suffix

In reply to Johan Hovold

The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name.

Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index.

---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c +1 -2
index be6a94439b6c..7b893c66cf75 100644
@@ -892,8 +892,7 @@ int qcom_qmp_phy_pcie_msm8996_create(struct device *dev, struct device_node *np,
 	if (!qphy->pcs_misc)
 		dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
 
-	snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
-	qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
+	qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
 	if (IS_ERR(qphy->pipe_clk)) {
 		return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
 				     "failed to get lane%d pipe clock\n", id);
Signature · 1 line
2.35.1
Reviewed-by on v3 28/30
#32 lore raw

Re: [PATCH v3 28/30] phy: qcom-qmp-pcie-msm8996: drop pipe clock lane suffix

Quoted 7 lines · Johan Hovold

The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name.

Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index.

Best regards,
Krzysztof

Reviewed-by on v3 28/30
#33 lore raw

Re: [PATCH v3 28/30] phy: qcom-qmp-pcie-msm8996: drop pipe clock lane suffix

In reply to Johan Hovold
Quoted 8 lines · Johan Hovold

The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name.

Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index.

Quoted 4 lines
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
Signature · 2 lines
With best wishes
Dmitry
#34 lore raw

PATCH v3 29/30 phy: qcom-qmp-pcie-msm8996: drop reset lane suffix

In reply to Johan Hovold

The lane reset is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the reset name.

Update driver to support the new binding where the "lane" reset name has been deprecated by instead requesting the reset by index.

---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c +1 -4
index 7b893c66cf75..a4ff15b289cd 100644
@@ -860,7 +860,6 @@ int qcom_qmp_phy_pcie_msm8996_create(struct device *dev, struct device_node *np,
 	struct qcom_qmp *qmp = dev_get_drvdata(dev);
 	struct phy *generic_phy;
 	struct qmp_phy *qphy;
-	char prop_name[MAX_PROP_NAME];
 	int ret;
 
 	qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
@@ -898,9 +897,7 @@ int qcom_qmp_phy_pcie_msm8996_create(struct device *dev, struct device_node *np,
 				     "failed to get lane%d pipe clock\n", id);
 	}
 
-	/* Get lane reset, if any */
-	snprintf(prop_name, sizeof(prop_name), "lane%d", id);
-	qphy->lane_rst = of_reset_control_get_exclusive(np, prop_name);
+	qphy->lane_rst = of_reset_control_get_exclusive_by_index(np, 0);
 	if (IS_ERR(qphy->lane_rst)) {
 		dev_err(dev, "failed to get lane%d reset\n", id);
 		return PTR_ERR(qphy->lane_rst);
Signature · 1 line
2.35.1
Reviewed-by on v3 29/30
#35 lore raw

Re: [PATCH v3 29/30] phy: qcom-qmp-pcie-msm8996: drop reset lane suffix

Quoted 10 lines · Johan Hovold

The lane reset is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the reset name.

Update driver to support the new binding where the "lane" reset name has been deprecated by instead requesting the reset by index.

---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

Best regards,
Krzysztof

Signature · 3 lines
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
Reviewed-by on v3 29/30
#36 lore raw

Re: [PATCH v3 29/30] phy: qcom-qmp-pcie-msm8996: drop reset lane suffix

In reply to Johan Hovold
Quoted 8 lines · Johan Hovold

The lane reset is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the reset name.

Update driver to support the new binding where the "lane" reset name has been deprecated by instead requesting the reset by index.

Quoted 3 lines
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie-msm8996.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
Signature · 2 lines
With best wishes
Dmitry
#37 lore raw

PATCH v3 30/30 phy: qcom-qmp-usb: drop pipe clock lane suffix

In reply to Johan Hovold

The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name.

Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index.

---
 drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
drivers/phy/qualcomm/phy-qcom-qmp-usb.c +1 -3
index 3fa7ec335157..046036986f9b 100644
@@ -2631,7 +2631,6 @@ int qcom_qmp_phy_usb_create(struct device *dev, struct device_node *np, int id,
 	struct qcom_qmp *qmp = dev_get_drvdata(dev);
 	struct phy *generic_phy;
 	struct qmp_phy *qphy;
-	char prop_name[MAX_PROP_NAME];
 	int ret;
 
 	qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
@@ -2690,8 +2689,7 @@ int qcom_qmp_phy_usb_create(struct device *dev, struct device_node *np, int id,
 	if (!qphy->pcs_misc)
 		dev_vdbg(dev, "PHY pcs_misc-reg not used\n");
 
-	snprintf(prop_name, sizeof(prop_name), "pipe%d", id);
-	qphy->pipe_clk = devm_get_clk_from_child(dev, np, prop_name);
+	qphy->pipe_clk = devm_get_clk_from_child(dev, np, NULL);
 	if (IS_ERR(qphy->pipe_clk)) {
 		return dev_err_probe(dev, PTR_ERR(qphy->pipe_clk),
 				     "failed to get lane%d pipe clock\n", id);
Signature · 1 line
2.35.1
Reviewed-by on v3 30/30
#38 lore raw

Re: [PATCH v3 30/30] phy: qcom-qmp-usb: drop pipe clock lane suffix

Quoted 8 lines · Johan Hovold

The pipe clock is defined in the "lane" node so there's no need to keep adding a redundant lane-number suffix to the clock name.

Update driver to support the new binding where the pipe clock name has been deprecated by instead requesting the clock by index.

Quoted 3 lines
---
  drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 4 +---
  1 file changed, 1 insertion(+), 3 deletions(-)
Signature · 2 lines
With best wishes
Dmitry
#39 lore raw
In reply to Johan Hovold
Quoted 16 lines · Johan Hovold

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

Quoted 6 lines

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

Hi Vinod,

any chance of getting these into 5.20?

Note that there'll be an -rc8 on Sunday.

Johan

#40 lore raw

Hi Vinod,

Quoted 21 lines · Johan Hovold
Quoted 20 lines · Johan Hovold

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

Quoted 8 lines
Quoted 2 lines

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

Hi Vinod,

any chance of getting these into 5.20?

Note that there'll be an -rc8 on Sunday.

Have you had a chance to look at this series yet?

Johan

maintainer
#41 lore raw
In reply to Johan Hovold
Quoted 21 lines · Johan Hovold
Quoted 20 lines · Johan Hovold

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

Quoted 8 lines
Quoted 2 lines

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

Hi Vinod,

any chance of getting these into 5.20?

Note that there'll be an -rc8 on Sunday.

Sorry phy tree goes thru char-misc and it was already sent and closed, so couldnt do the needful

Signature · 1 line
~Vinod
#42 lore raw
Quoted 25 lines · Vinod Koul
Quoted 24 lines · Johan Hovold
Quoted 22 lines · Johan Hovold

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

Quoted 8 lines
Quoted 5 lines

Hi Vinod,

any chance of getting these into 5.20?

Note that there'll be an -rc8 on Sunday.

Sorry phy tree goes thru char-misc and it was already sent and closed, so couldnt do the needful

Yeah, it was a bit of a wild shot, but I noticed you hadn't actually sent your PR to Greg yet when I pinged you.

Johan

Signature · 3 lines
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
maintainer
#43 lore raw
In reply to Johan Hovold
Quoted 16 lines · Johan Hovold

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

Quoted 6 lines

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

This fails at patch 2 for me on v6.0-rc1, please rebase and resend

Thanks

Signature · 1 line
~Vinod
#44 lore raw
Quoted 17 lines · Vinod Koul
Quoted 16 lines · Johan Hovold

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

Quoted 8 lines
Quoted 6 lines

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

This fails at patch 2 for me on v6.0-rc1, please rebase and resend

Are you sure you haven't applied anything to your local tree that causes this?

I just tried fetching the v3 series from lore and it applies just fine on top of 6.0-rc1.

Note that if you've added a new compatible string locally, the second patch which sorts the compatible strings is likely to fail to apply.

Johan

Signature · 3 lines
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
maintainer
#45 lore raw
Quoted 22 lines · Johan Hovold
Quoted 21 lines · Vinod Koul
Quoted 20 lines · Johan Hovold

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

This fails at patch 2 for me on v6.0-rc1, please rebase and resend

Are you sure you haven't applied anything to your local tree that causes this?

Pretty sure :-)

Quoted 6 lines

I just tried fetching the v3 series from lore and it applies just fine on top of 6.0-rc1.

Note that if you've added a new compatible string locally, the second patch which sorts the compatible strings is likely to fail to apply.

At that time no, now I think I have patch or so ... Tree should be pushed in a bit, you can check

Signature · 1 line
~Vinod
#46 lore raw
Quoted 26 lines · Vinod Koul
Quoted 25 lines · Johan Hovold
Quoted 24 lines · Vinod Koul
Quoted 22 lines · Johan Hovold

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

This fails at patch 2 for me on v6.0-rc1, please rebase and resend

Are you sure you haven't applied anything to your local tree that causes this?

Pretty sure :-)

Hmm. But nothing had changed in 6.0-rc1 and it still applies on a clean 6.0-rc1 as expected here.

Would you mind trying again?

	git checkout -b tmp-branch v6.0-rc1
	b4 am [email protected]
	git am ./v3_20220714_johan_linaro_phy_qcom_qmp_fix_dt_bindings_and_deprecate_lane_suffix.mbx
Quoted 8 lines
Quoted 5 lines

I just tried fetching the v3 series from lore and it applies just fine on top of 6.0-rc1.

Note that if you've added a new compatible string locally, the second patch which sorts the compatible strings is likely to fail to apply.

At that time no, now I think I have patch or so ... Tree should be pushed in a bit, you can check

Which tree would that be? The linux-phy tree next branch is still at -rc1:

https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git/

Johan

maintainer
#47 lore raw
Quoted 49 lines · Johan Hovold
Quoted 26 lines · Vinod Koul
Quoted 25 lines · Johan Hovold
Quoted 24 lines · Vinod Koul
Quoted 22 lines · Johan Hovold

When adding support for SC8280XP to the QMP PHY driver I noticed that the PHY provider child node was not described by the current DT schema.

The SC8280XP PHYs also need a second fixed-divider PIPE clock ("pipediv2") and I didn't want to have to add a bogus "lane" suffix to the clock name just to match the current "pipe0" name so I decided to deprecate the unnecessary suffix in the current binding instead.

To be able to add the missing child-node schema and handle device specifics like additional PIPE clocks, it quickly became obvious that the binding needs to be split up.

This series clean up and fixes some issue with the current schema before splitting it up in separate schemas for PCIe, UFS and USB and adding missing parts like the child PHY provider nodes.

The MSM8996 PCIe PHY gets its own schema as this is the only non-combo PHY that actually provides more than one PHY per IP block. Note that the "lane" suffix is still unnecessary and misleading.

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

Quoted 6 lines
Quoted 4 lines
Quoted 1 line

This fails at patch 2 for me on v6.0-rc1, please rebase and resend

Are you sure you haven't applied anything to your local tree that causes this?

Pretty sure :-)

Hmm. But nothing had changed in 6.0-rc1 and it still applies on a clean 6.0-rc1 as expected here.

Would you mind trying again?

	git checkout -b tmp-branch v6.0-rc1
	b4 am [email protected]
	git am ./v3_20220714_johan_linaro_phy_qcom_qmp_fix_dt_bindings_and_deprecate_lane_suffix.mbx
Quoted 6 lines
Quoted 5 lines

I just tried fetching the v3 series from lore and it applies just fine on top of 6.0-rc1.

Note that if you've added a new compatible string locally, the second patch which sorts the compatible strings is likely to fail to apply.

Quoted 6 lines
Quoted 2 lines

At that time no, now I think I have patch or so ... Tree should be pushed in a bit, you can check

Which tree would that be? The linux-phy tree next branch is still at -rc1:

https://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy.git/

It is updated now, my tests were running

Signature · 1 line
~Vinod
#48 lore raw
In reply to Johan Hovold
Quoted 2 lines · Johan Hovold
Quoted 1 line · Vinod Koul

On 14-07-22, 14:43, Johan Hovold wrote:

[skipped]

Quoted 7 lines
Quoted 4 lines
Quoted 2 lines

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

This fails at patch 2 for me on v6.0-rc1, please rebase and resend

Are you sure you haven't applied anything to your local tree that causes this?

When doing the QMP split, we ended up in a similar situation if I remember correctly. Most probably the easiest way is to provide a branch for Vinod to pull in addition to the patches being sent to ML.

Quoted 7 lines

I just tried fetching the v3 series from lore and it applies just fine on top of 6.0-rc1.

Note that if you've added a new compatible string locally, the second patch which sorts the compatible strings is likely to fail to apply.

Johan

Signature · 8 lines
With best wishes
Dmitry


-- 
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy
#49 lore raw
Quoted 9 lines · Dmitry Baryshkov
Quoted 2 lines · Johan Hovold
Quoted 1 line · Vinod Koul

On 14-07-22, 14:43, Johan Hovold wrote:

[skipped]

Quoted 3 lines
Quoted 3 lines
Quoted 2 lines

The final patches add support for the updated binding to the (recently split up) PHY drivers. Included is also a related combo PHY cleanup.

Quoted 8 lines
Quoted 4 lines
Quoted 1 line

This fails at patch 2 for me on v6.0-rc1, please rebase and resend

Are you sure you haven't applied anything to your local tree that causes this?

When doing the QMP split, we ended up in a similar situation if I remember correctly. Most probably the easiest way is to provide a branch for Vinod to pull in addition to the patches being sent to ML.

Hopefully v4 will just work now.

Quoted 5 lines
Quoted 5 lines

I just tried fetching the v3 series from lore and it applies just fine on top of 6.0-rc1.

Note that if you've added a new compatible string locally, the second patch which sorts the compatible strings is likely to fail to apply.

Johan

Signature · 3 lines
linux-phy mailing list
[email protected]
https://lists.infradead.org/mailman/listinfo/linux-phy