pc-bios: s390x: Cleanup part 1
cover pc-bios: s390x: Cleanup part 1
The bios is in dire need for a cleanup as there are still a lot of magic constants being used throughout as well as duplicated code.
In the first part of this series we consolidate constants and functions, as well as doing some minor cleanups and fixes.
The patches are based on my protvirt branch and are available here:
https://github.com/frankjaa/qemu/pull/new/cleanup_bios
Janosch Frank (8):
pc-bios: s390x: Consolidate timing functions into time.h
pc-bios: s390x: Get rid of magic offsets into the lowcore
pc-bios: s390x: Rename and use PSW_MASK_ZMODE constant
pc-bios: s390x: Use PSW masks where possible
pc-bios: s390x: Move panic() into header and add infinite loop
pc-bios: s390x: Use ebcdic2ascii table
pc-bios: s390x: Replace 0x00 with 0x0 or 0
pc-bios: s390x: Make u32 ptr check explicit
pc-bios/s390-ccw/bootmap.c | 4 +--- pc-bios/s390-ccw/cio.h | 17 +++++++++------ pc-bios/s390-ccw/dasd-ipl.c | 17 +++++++-------- pc-bios/s390-ccw/helper.h | 2 +- pc-bios/s390-ccw/jump2ipl.c | 10 ++++----- pc-bios/s390-ccw/main.c | 15 +++---------- pc-bios/s390-ccw/menu.c | 1 + pc-bios/s390-ccw/netmain.c | 23 +++----------------- pc-bios/s390-ccw/s390-arch.h | 4 +++- pc-bios/s390-ccw/s390-ccw.h | 25 ++++++---------------- pc-bios/s390-ccw/start.S | 5 +++-- pc-bios/s390-ccw/time.h | 39 ++++++++++++++++++++++++++++++++++ pc-bios/s390-ccw/virtio-net.c | 1 + pc-bios/s390-ccw/virtio-scsi.c | 1 + pc-bios/s390-ccw/virtio.c | 18 +++------------- 15 files changed, 88 insertions(+), 94 deletions(-) create mode 100644 pc-bios/s390-ccw/time.h
Signature · 1 line
2.25.1
PATCH 1/8 pc-bios: s390x: Consolidate timing functions into time.h
Let's consolidate timing related functions into one header.
--- pc-bios/s390-ccw/menu.c | 1 + pc-bios/s390-ccw/netmain.c | 15 +++---------- pc-bios/s390-ccw/s390-ccw.h | 18 ---------------- pc-bios/s390-ccw/time.h | 39 ++++++++++++++++++++++++++++++++++ pc-bios/s390-ccw/virtio-net.c | 1 + pc-bios/s390-ccw/virtio-scsi.c | 1 + pc-bios/s390-ccw/virtio.c | 18 +++------------- 7 files changed, 48 insertions(+), 45 deletions(-) create mode 100644 pc-bios/s390-ccw/time.h
pc-bios/s390-ccw/menu.c +1 -0
@@ -12,6 +12,7 @@#include "libc.h" #include "s390-ccw.h" #include "sclp.h" +#include "time.h" #define KEYCODE_NO_INP '\0'#define KEYCODE_ESCAPE '\033'
pc-bios/s390-ccw/netmain.c +3 -12
@@ -35,6 +35,7 @@#include "s390-ccw.h" #include "cio.h" #include "virtio.h" +#include "time.h" #define DEFAULT_BOOT_RETRIES 10#define DEFAULT_TFTP_RETRIES 20
@@ -57,24 +58,14 @@ static SubChannelId net_schid = { .one = 1 };static uint8_t mac[6 ];static uint64_t dest_timer; -static uint64_t get_timer_ms (void ) -{ -uint64_t clk; - - asmvolatile (" stck %0 " : :"Q" (clk) :"memory" ); - -/* Bit 51 is incremented each microsecond */ -return (clk >> (63 -51 )) /1000 ; -} -void set_timer (int val) { - dest_timer =get_timer_ms () + val; + dest_timer =get_time_milli () + val; }int get_timer (void ) { -return dest_timer -get_timer_ms (); +return dest_timer -get_time_milli (); }int get_sec_ticks (void )
pc-bios/s390-ccw/s390-ccw.h +0 -18
@@ -74,8 +74,6 @@ unsigned long virtio_load_direct(ulong rec_list1, ulong rec_list2,bool virtio_is_supported (SubChannelId schid);void virtio_blk_setup_device (SubChannelId schid);int virtio_read (ulong sector,void *load_addr); -u64 get_clock (void ); -ulong get_second (void );/* bootmap.c */ void zipl_load (void );
@@ -144,24 +142,8 @@ static inline void debug_print_addr(const char *desc, void *p)#define KVM_S390_VIRTIO_SET_STATUS 2#define KVM_S390_VIRTIO_CCW_NOTIFY 3 -static inline void yield (void ) -{ - asmvolatile ("diag 0,0,0x44" - : : - :"memory" ,"cc" ); -} -#define MAX_SECTOR_SIZE 4096 -static inline void sleep (unsigned int seconds) -{ -ulong target =get_second () + seconds; - -while (get_second () < target) { -yield (); - } -} -static inline void IPL_assert (bool term,const char *message) {if (!term) {
pc-bios/s390-ccw/time.h new file +39 -0
@@ -0,0 +1,39 @@ +#ifndef TIME_H +#define TIME_H + +static inline u64 get_clock (void ) +{ +u64 r; + + asmvolatile ("stck %0" :"=Q" (r) : :"cc" ); +return r; +} + +static inline u64 get_time_milli (void ) +{ +/* Bit 51 is incremented each microsecond */ +return (get_clock () >>12 ) /1000 ; +} + +static inline u64 get_time_seconds (void ) +{ +return (get_time_milli ()) /1000 ; +} + +static inline void yield (void ) +{ + asmvolatile ("diag 0,0,0x44" + : : + :"memory" ,"cc" ); +} + +static inline void sleep (unsigned int seconds) +{ +ulong target =get_time_seconds () + seconds; + +while (get_time_seconds () < target) { +yield (); + } +} + +#endif
pc-bios/s390-ccw/virtio-net.c +1 -0
@@ -19,6 +19,7 @@#include <ethernet.h> #include "s390-ccw.h" #include "virtio.h" +#include "time.h" #ifndef DEBUG_VIRTIO_NET #define DEBUG_VIRTIO_NET 0
pc-bios/s390-ccw/virtio-scsi.c +1 -0
@@ -14,6 +14,7 @@#include "virtio.h" #include "scsi.h" #include "virtio-scsi.h" +#include "time.h" static ScsiDevice default_scsi_device;static VirtioScsiCmdReq req;
pc-bios/s390-ccw/virtio.c +3 -15
@@ -15,6 +15,7 @@#include "virtio-scsi.h" #include "bswap.h" #include "helper.h" +#include "time.h" #define VRING_WAIT_REPLY_TIMEOUT 30
@@ -157,19 +158,6 @@ void vring_send_buf(VRing *vr, void *p, int len, int flags) } } -u64 get_clock (void ) -{ -u64 r; - - asmvolatile ("stck %0" :"=Q" (r) : :"cc" ); -return r; -} - -ulong get_second (void ) -{ -return (get_clock () >>12 ) /1000000 ; -} -int vr_poll (VRing *vr) {if (vr->used->idx == vr->used_idx) {
@@ -194,7 +182,7 @@ int vr_poll(VRing *vr)*/ int vring_wait_reply (void ) { -ulong target_second =get_second () + vdev.wait_reply_timeout; +ulong target_second =get_time_seconds () + vdev.wait_reply_timeout;/* Wait for any queue to be updated by the host */ do {
@@ -207,7 +195,7 @@ int vring_wait_reply(void)if (r) {return 0 ; } - }while (!vdev.wait_reply_timeout || (get_second () < target_second)); + }while (!vdev.wait_reply_timeout || (get_time_seconds () < target_second));return 1 ; }
Signature · 1 line
2.25.1
Re: [PATCH 1/8] pc-bios: s390x: Consolidate timing functions into time.h
Quoted 111 lines · Janosch Frank
Let's consolidate timing related functions into one header.
Signed-off-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/menu.c | 1 + pc-bios/s390-ccw/netmain.c | 15 +++---------- pc-bios/s390-ccw/s390-ccw.h | 18 ---------------- pc-bios/s390-ccw/time.h | 39 ++++++++++++++++++++++++++++++++++ pc-bios/s390-ccw/virtio-net.c | 1 + pc-bios/s390-ccw/virtio-scsi.c | 1 + pc-bios/s390-ccw/virtio.c | 18 +++------------- 7 files changed, 48 insertions(+), 45 deletions(-) create mode 100644 pc-bios/s390-ccw/time.hpc-bios/s390-ccw/menu.c +1
-0@@ -12,6 +12,7 @@#include "libc.h" #include "s390-ccw.h" #include "sclp.h" +#include "time.h" #define KEYCODE_NO_INP '\0'#define KEYCODE_ESCAPE '\033'pc-bios/s390-ccw/netmain.c +3
-12@@ -35,6 +35,7 @@#include "s390-ccw.h" #include "cio.h" #include "virtio.h" +#include "time.h" #define DEFAULT_BOOT_RETRIES 10#define DEFAULT_TFTP_RETRIES 20@@ -57,24 +58,14 @@ static SubChannelId net_schid = { .one = 1 };static uint8_t mac[6 ];static uint64_t dest_timer; -static uint64_t get_timer_ms (void ) -{ -uint64_t clk; - - asmvolatile (" stck %0 " : :"Q" (clk) :"memory" ); - -/* Bit 51 is incremented each microsecond */ -return (clk >> (63 -51 )) /1000 ; -} -void set_timer (int val) { - dest_timer =get_timer_ms () + val; + dest_timer =get_time_milli () + val; }int get_timer (void ) { -return dest_timer -get_timer_ms (); +return dest_timer -get_time_milli (); }int get_sec_ticks (void )pc-bios/s390-ccw/s390-ccw.h +0
-18@@ -74,8 +74,6 @@ unsigned long virtio_load_direct(ulong rec_list1, ulong rec_list2,bool virtio_is_supported (SubChannelId schid);void virtio_blk_setup_device (SubChannelId schid);int virtio_read (ulong sector,void *load_addr); -u64 get_clock (void ); -ulong get_second (void );/* bootmap.c */ void zipl_load (void );@@ -144,24 +142,8 @@ static inline void debug_print_addr(const char *desc, void *p)#define KVM_S390_VIRTIO_SET_STATUS 2#define KVM_S390_VIRTIO_CCW_NOTIFY 3 -static inline void yield (void ) -{ - asmvolatile ("diag 0,0,0x44" - : : - :"memory" ,"cc" ); -} -#define MAX_SECTOR_SIZE 4096 -static inline void sleep (unsigned int seconds) -{ -ulong target =get_second () + seconds; - -while (get_second () < target) { -yield (); - } -} -static inline void IPL_assert (bool term,const char *message) {if (!term) {pc-bios/s390-ccw/time.h new file +2
-0@@ -0,0 +1,39 @@ +#ifndef TIME_H +#define TIME_H
pc-bios/s390-ccw/time.h line 12
Quoted 10 lines
pc-bios/s390-ccw/time.h new file +10
-0+ +static inline u64 get_clock (void ) +{ +u64 r; + + asmvolatile ("stck %0" :"=Q" (r) : :"cc" ); +return r; +} + +static inline u64 get_time_milli (void )
Milli Vanilli?
Please, just use common abbreviations. "ms" is certainly good enough.
Signature · 3 lines
Thanks, David / dhildenb
PATCH 2/8 pc-bios: s390x: Get rid of magic offsets into the lowcore
In reply to Janosch FrankIf we have a lowcore struct that has members for offsets that we want to touch, why not use it?
--- pc-bios/s390-ccw/cio.h | 17 +++++++++++------ pc-bios/s390-ccw/main.c | 8 +++----- 2 files changed, 14 insertions(+), 11 deletions(-)
pc-bios/s390-ccw/cio.h +11 -6
@@ -122,12 +122,17 @@ typedef struct schib { } __attribute__ ((packed, aligned(4))) Schib;typedef struct subchannel_id { -__u32 cssid:8 ; - __u32:4; -__u32 m:1 ; -__u32 ssid:2 ; -__u32 one:1 ; -__u32 sch_no:16 ; +union { +struct { +__u16 cssid:8 ; + __u16:4; +__u16 m:1 ; +__u16 ssid:2 ; +__u16 one:1 ; + }; +__u16 sch_id; + }; +__u16 sch_no; } __attribute__ ((packed,aligned (4 )))SubChannelId ;struct chsc_header {
pc-bios/s390-ccw/main.c +3 -5
@@ -36,11 +36,9 @@ LowCore *lowcore; /* Yes, this *is* a pointer to address 0 */*/ void write_subsystem_identification (void ) { -SubChannelId *schid = (SubChannelId *)184 ; -uint32_t *zeroes = (uint32_t *)188 ; - - *schid = blk_schid; - *zeroes =0 ; + lowcore->subchannel_id = blk_schid.sch_id; + lowcore->subchannel_nr = blk_schid.sch_no; + lowcore->io_int_parm =0 ; }void write_iplb_location (void )
Signature · 1 line
2.25.1
Re: [PATCH 2/8] pc-bios: s390x: Get rid of magic offsets into the lowcore
Quoted 17 lines · Janosch Frank
If we have a lowcore struct that has members for offsets that we want to touch, why not use it?
Signed-off-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/cio.h | 17 +++++++++++------ pc-bios/s390-ccw/main.c | 8 +++----- 2 files changed, 14 insertions(+), 11 deletions(-)pc-bios/s390-ccw/cio.h +0
-0@@ -122,12 +122,17 @@ typedef struct schib { } __attribute__ ((packed, aligned(4))) Schib; typedef struct subchannel_id {
pc-bios/s390-ccw/cio.h typedef struct schib { · line 128
Quoted 10 lines
pc-bios/s390-ccw/cio.h +4
-6- __u32 cssid:8; - __u32:4 ; - __u32 m:1; - __u32 ssid:2; - __u32 one:1; - __u32 sch_no:16; + union { + struct { + __u16 cssid:8; + __u16:4;
Broken indentation. Also, do we want to give that strange-looking "__u32:4" a name ("reserved").
Quoted 20 lines
pc-bios/s390-ccw/cio.h +7
-0+ __u16 m:1; + __u16 ssid:2; + __u16 one:1; + }; +__u16 sch_id; + }; +__u16 sch_no; } __attribute__ ((packed, aligned(4))) SubChannelId;struct chsc_header {pc-bios/s390-ccw/main.c +0
-1@@ -36,11 +36,9 @@ LowCore *lowcore; /* Yes, this *is* a pointer to address 0 */*/ void write_subsystem_identification (void ) { -SubChannelId *schid = (SubChannelId *)184 ;
pc-bios/s390-ccw/main.c LowCore *lowcore; /* Yes, this *is* a pointer to address 0 */ · line 44
Quoted 10 lines
pc-bios/s390-ccw/main.c +3
-4-uint32_t *zeroes = (uint32_t *)188 ; - - *schid = blk_schid; - *zeroes =0 ; + lowcore->subchannel_id = blk_schid.sch_id; + lowcore->subchannel_nr = blk_schid.sch_no; + lowcore->io_int_parm =0 ; }void write_iplb_location (void )
Looks sane to me.
Signature · 3 lines
Thanks, David / dhildenb
Re: [PATCH 2/8] pc-bios: s390x: Get rid of magic offsets into the lowcore
Quoted 17 lines · David Hildenbrand
Quoted 16 lines · Janosch Frank
If we have a lowcore struct that has members for offsets that we want to touch, why not use it?
Signed-off-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/cio.h | 17 +++++++++++------ pc-bios/s390-ccw/main.c | 8 +++----- 2 files changed, 14 insertions(+), 11 deletions(-)pc-bios/s390-ccw/cio.h +0
-0@@ -122,12 +122,17 @@ typedef struct schib { } __attribute__ ((packed, aligned(4))) Schib;
Quoted 14 lines
pc-bios/s390-ccw/cio.h typedef struct schib { · line 128
Quoted 11 lines
pc-bios/s390-ccw/cio.h +4
-6typedef struct subchannel_id { - __u32 cssid:8; - __u32:4; - __u32 m:1; - __u32 ssid:2; - __u32 one:1; - __u32 sch_no:16; + union { + struct { + __u16 cssid:8; + __u16:4;Broken indentation. Also, do we want to give that strange-looking "__u32:4" a name ("reserved").
Fixed indentation and renamed.
Quoted 34 lines
Quoted 21 lines
pc-bios/s390-ccw/cio.h +7
-0+ __u16 m:1; + __u16 ssid:2; + __u16 one:1; + }; +__u16 sch_id; + }; +__u16 sch_no; } __attribute__ ((packed, aligned(4))) SubChannelId;struct chsc_header {pc-bios/s390-ccw/main.c +0
-1@@ -36,11 +36,9 @@ LowCore *lowcore; /* Yes, this *is* a pointer to address 0 */*/ void write_subsystem_identification (void ) { -SubChannelId *schid = (SubChannelId *)184 ;pc-bios/s390-ccw/main.c LowCore *lowcore; /* Yes, this *is* a pointer to address 0 */ · line 44
Quoted 10 lines
pc-bios/s390-ccw/main.c +3
-4-uint32_t *zeroes = (uint32_t *)188 ; - - *schid = blk_schid; - *zeroes =0 ; + lowcore->subchannel_id = blk_schid.sch_id; + lowcore->subchannel_nr = blk_schid.sch_no; + lowcore->io_int_parm =0 ; }void write_iplb_location (void )Looks sane to me.
PATCH 3/8 pc-bios: s390x: Rename and use PSW_MASK_ZMODE constant
In reply to Janosch FrankZMODE has a lot of ambiguity with the ESAME architecture mode, but is actually 64 bit addressing.
--- pc-bios/s390-ccw/dasd-ipl.c | 3 +-- pc-bios/s390-ccw/s390-arch.h | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-)
pc-bios/s390-ccw/dasd-ipl.c +1 -2
@@ -229,7 +229,6 @@ void dasd_ipl(SubChannelId schid, uint16_t cutype)run_ipl2 (schid, cutype, ipl2_addr);/* Transfer control to the guest operating system */ - pswl->mask |=PSW_MASK_EAMODE ;/* Force z-mode */ - pswl->addr |=PSW_MASK_BAMODE ;/* ... */ + pswl->mask |=PSW_MASK_64 ;/* Force 64 bit addressing */ jump_to_low_kernel (); }
pc-bios/s390-ccw/s390-arch.h +1 -1
@@ -29,7 +29,7 @@ _Static_assert(sizeof(struct PSWLegacy) == 8, "PSWLegacy size incorrect");#define PSW_MASK_WAIT 0x0002000000000000ULL#define PSW_MASK_EAMODE 0x0000000100000000ULL#define PSW_MASK_BAMODE 0x0000000080000000ULL -#define PSW_MASK_ZMODE (PSW_MASK_EAMODE | PSW_MASK_BAMODE) +#define PSW_MASK_64 (PSW_MASK_EAMODE | PSW_MASK_BAMODE)/* Low core mapping */ typedef struct LowCore {
Signature · 1 line
2.25.1
Re: [PATCH 3/8] pc-bios: s390x: Rename and use PSW_MASK_ZMODE constant
Quoted 29 lines · Janosch Frank
ZMODE has a lot of ambiguity with the ESAME architecture mode, but is actually 64 bit addressing.
Signed-off-by Janosch Frank <[email protected]>Reviewed-by Pierre Morel <[email protected]>--- pc-bios/s390-ccw/dasd-ipl.c | 3 +-- pc-bios/s390-ccw/s390-arch.h | 2 +- 2 files changed, 2 insertions(+), 3 deletions(-)pc-bios/s390-ccw/dasd-ipl.c +1
-2@@ -229,7 +229,6 @@ void dasd_ipl(SubChannelId schid, uint16_t cutype)run_ipl2 (schid, cutype, ipl2_addr);/* Transfer control to the guest operating system */ - pswl->mask |=PSW_MASK_EAMODE ;/* Force z-mode */ - pswl->addr |=PSW_MASK_BAMODE ;/* ... */ + pswl->mask |=PSW_MASK_64 ;/* Force 64 bit addressing */ jump_to_low_kernel (); }pc-bios/s390-ccw/s390-arch.h +0
-0
pc-bios/s390-ccw/s390-arch.h _Static_assert(sizeof(struct PSWLegacy) == 8, "PSWLegacy size incorrect"); · line 35
Quoted 8 lines
pc-bios/s390-ccw/s390-arch.h +1
-1@@ -29,7 +29,7 @@ _Static_assert(sizeof(struct PSWLegacy) == 8, "PSWLegacy size incorrect");#define PSW_MASK_WAIT 0x0002000000000000ULL#define PSW_MASK_EAMODE 0x0000000100000000ULL#define PSW_MASK_BAMODE 0x0000000080000000ULL -#define PSW_MASK_ZMODE (PSW_MASK_EAMODE | PSW_MASK_BAMODE) +#define PSW_MASK_64 (PSW_MASK_EAMODE | PSW_MASK_BAMODE)/* Low core mapping */ typedef struct LowCore {
Signature · 3 lines
Thanks, David / dhildenb
PATCH 4/8 pc-bios: s390x: Use PSW masks where possible
In reply to Janosch FrankLet's move some of the PSW mask defines into s390-arch.h and use them in jump2ipl.c
--- pc-bios/s390-ccw/jump2ipl.c | 10 ++++------ pc-bios/s390-ccw/s390-arch.h | 2 ++ 2 files changed, 6 insertions(+), 6 deletions(-)
pc-bios/s390-ccw/jump2ipl.c +4 -6
@@ -8,12 +8,10 @@#include "libc.h" #include "s390-ccw.h" +#include "s390-arch.h" #define KERN_IMAGE_START 0x010000UL -#define PSW_MASK_64 0x0000000100000000ULL -#define PSW_MASK_32 0x0000000080000000ULL -#define PSW_MASK_SHORTPSW 0x0008000000000000ULL -#define RESET_PSW_MASK (PSW_MASK_SHORTPSW | PSW_MASK_32 | PSW_MASK_64) +#define RESET_PSW_MASK (PSW_MASK_SHORTPSW | PSW_MASK_64) typedef struct ResetInfo { uint64_t ipl_psw;
@@ -54,7 +52,7 @@ void jump_to_IPL_code(uint64_t address) current->ipl_psw = (uint64_t ) &jump_to_IPL_2; current->ipl_psw |=RESET_PSW_MASK ; - current->ipl_continue = address &0x7fffffff ; + current->ipl_continue = address &PSW_MASK_SHORT_ADDR ;debug_print_int ("set IPL addr to" , current->ipl_continue);
@@ -86,7 +84,7 @@ void jump_to_low_kernel(void)/* Trying to get PSW at zero address */ if (*((uint64_t *)0 ) &RESET_PSW_MASK ) { -jump_to_IPL_code ((*((uint64_t *)0 )) &0x7fffffff ); +jump_to_IPL_code ((*((uint64_t *)0 )) &PSW_MASK_SHORT_ADDR ); }/* No other option left, so use the Linux kernel start address */
pc-bios/s390-ccw/s390-arch.h +2 -0
@@ -26,9 +26,11 @@ _Static_assert(sizeof(struct PSWLegacy) == 8, "PSWLegacy size incorrect");/* s390 psw bit masks */ #define PSW_MASK_IOINT 0x0200000000000000ULL +#define PSW_MASK_SHORTPSW 0x0008000000000000ULL#define PSW_MASK_WAIT 0x0002000000000000ULL#define PSW_MASK_EAMODE 0x0000000100000000ULL#define PSW_MASK_BAMODE 0x0000000080000000ULL +#define PSW_MASK_SHORT_ADDR 0x000000007fffffffULL#define PSW_MASK_64 (PSW_MASK_EAMODE | PSW_MASK_BAMODE)/* Low core mapping */
Signature · 1 line
2.25.1
Re: [PATCH 4/8] pc-bios: s390x: Use PSW masks where possible
Quoted 53 lines · Janosch Frank
Let's move some of the PSW mask defines into
s390-arch.hand use them injump2ipl.cSigned-off-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/jump2ipl.c | 10 ++++------ pc-bios/s390-ccw/s390-arch.h | 2 ++ 2 files changed, 6 insertions(+), 6 deletions(-)pc-bios/s390-ccw/jump2ipl.c +4
-6@@ -8,12 +8,10 @@#include "libc.h" #include "s390-ccw.h" +#include "s390-arch.h" #define KERN_IMAGE_START 0x010000UL -#define PSW_MASK_64 0x0000000100000000ULL -#define PSW_MASK_32 0x0000000080000000ULL -#define PSW_MASK_SHORTPSW 0x0008000000000000ULL -#define RESET_PSW_MASK (PSW_MASK_SHORTPSW | PSW_MASK_32 | PSW_MASK_64) +#define RESET_PSW_MASK (PSW_MASK_SHORTPSW | PSW_MASK_64) typedef struct ResetInfo { uint64_t ipl_psw;@@ -54,7 +52,7 @@ void jump_to_IPL_code(uint64_t address) current->ipl_psw = (uint64_t ) &jump_to_IPL_2; current->ipl_psw |=RESET_PSW_MASK ; - current->ipl_continue = address &0x7fffffff ; + current->ipl_continue = address &PSW_MASK_SHORT_ADDR ;debug_print_int ("set IPL addr to" , current->ipl_continue);@@ -86,7 +84,7 @@ void jump_to_low_kernel(void)/* Trying to get PSW at zero address */ if (*((uint64_t *)0 ) &RESET_PSW_MASK ) { -jump_to_IPL_code ((*((uint64_t *)0 )) &0x7fffffff ); +jump_to_IPL_code ((*((uint64_t *)0 )) &PSW_MASK_SHORT_ADDR ); }/* No other option left, so use the Linux kernel start address */ pc-bios/s390-ccw/s390-arch.h +0
-0@@ -26,9 +26,11 @@ _Static_assert(sizeof(struct PSWLegacy) == 8, "PSWLegacy size incorrect");
pc-bios/s390-ccw/s390-arch.h _Static_assert(sizeof(struct PSWLegacy) == 8, "PSWLegacy size incorrect"); · line 36
Quoted 10 lines
pc-bios/s390-ccw/s390-arch.h +2
-0/* s390 psw bit masks */ #define PSW_MASK_IOINT 0x0200000000000000ULL +#define PSW_MASK_SHORTPSW 0x0008000000000000ULL#define PSW_MASK_WAIT 0x0002000000000000ULL#define PSW_MASK_EAMODE 0x0000000100000000ULL#define PSW_MASK_BAMODE 0x0000000080000000ULL +#define PSW_MASK_SHORT_ADDR 0x000000007fffffffULL#define PSW_MASK_64 (PSW_MASK_EAMODE | PSW_MASK_BAMODE)/* Low core mapping */
Signature · 3 lines
Thanks, David / dhildenb
PATCH 5/8 pc-bios: s390x: Move panic() into header and add infinite loop
In reply to Janosch Frankpanic() was defined for the ccw and net bios, i.e. twice, so it's cleaner to rather put it into the header.
Also let's add an infinite loop into the assembly of disabled_wait() so the caller doesn't need to take care of it.
--- pc-bios/s390-ccw/main.c | 7 ------- pc-bios/s390-ccw/netmain.c | 8 -------- pc-bios/s390-ccw/s390-ccw.h | 7 ++++++- pc-bios/s390-ccw/start.S | 5 +++-- 4 files changed, 9 insertions(+), 18 deletions(-)
pc-bios/s390-ccw/main.c +0 -7
@@ -46,13 +46,6 @@ void write_iplb_location(void) lowcore->ptr_iplb =ptr2u32 (&iplb); } -void panic (const char *string) -{ -sclp_print (string); -disabled_wait (); -while (1 ) { } -} -unsigned int get_loadparm_index (void ) {return atoui (loadparm_str);
pc-bios/s390-ccw/netmain.c +0 -8
@@ -439,14 +439,6 @@ static int net_try_direct_tftp_load(filename_ip_t *fn_ip)return rc; } -void panic (const char *string) -{ -sclp_print (string); -for (;;) { -disabled_wait (); - } -} -void write_subsystem_identification (void ) {SubChannelId *schid = (SubChannelId *)184 ;
pc-bios/s390-ccw/s390-ccw.h +6 -1
@@ -55,7 +55,6 @@ void consume_sclp_int(void);void consume_io_int (void );/* main.c */ -void panic (const char *string);void write_subsystem_identification (void );void write_iplb_location (void ); extern char stack[PAGE_SIZE * 8] __attribute__((__aligned__(PAGE_SIZE)));
@@ -91,6 +90,12 @@ bool menu_is_enabled_enum(void);#define MAX_BOOT_ENTRIES 31 +static inline void panic (const char *string) +{ +sclp_print (string); +disabled_wait (); +} +static inline void fill_hex (char *out,unsigned char val) {const char hex[] ="0123456789abcdef" ;
pc-bios/s390-ccw/start.S +3 -2
@@ -47,8 +47,9 @@ memsetxc: */ .globl disabled_wait disabled_wait: - larl %r1,disabled_wait_psw - lpswe 0(%r1) + larl %r1,disabled_wait_psw + lpswe 0(%r1) +1: j 1b /*
Signature · 1 line
2.25.1
Re: [PATCH 5/8] pc-bios: s390x: Move panic() into header and add infinite loop
Quoted 2 lines · On Tue, 24 Mar 2020 11:08:44 -0400 Janosch Frank <[email protected]> wrote:
panic()was defined for the ccw and net bios, i.e. twice, so it's cleaner to rather put it into the header.
They were also slightly different, so unifying them makes sense.
Quoted 33 lines
Also let's add an infinite loop into the assembly of
disabled_wait()so the caller doesn't need to take care of it.Signed-off-by Janosch Frank <[email protected]>Reviewed-by Pierre Morel <[email protected]>--- pc-bios/s390-ccw/main.c | 7 ------- pc-bios/s390-ccw/netmain.c | 8 -------- pc-bios/s390-ccw/s390-ccw.h | 7 ++++++- pc-bios/s390-ccw/start.S | 5 +++-- 4 files changed, 9 insertions(+), 18 deletions(-)pc-bios/s390-ccw/s390-ccw.h +6
-0@@ -91,6 +90,12 @@ bool menu_is_enabled_enum(void);#define MAX_BOOT_ENTRIES 31 +static inline void panic (const char *string) +{ +sclp_print (string); +disabled_wait (); +} +static inline void fill_hex (char *out,unsigned char val) {const char hex[] ="0123456789abcdef" ;pc-bios/s390-ccw/start.S +0
-0@@ -47,8 +47,9 @@ memsetxc: */
pc-bios/s390-ccw/start.S memsetxc: · line 55
Quoted 10 lines
pc-bios/s390-ccw/start.S +3
-2.globl disabled_wait disabled_wait: - larl %r1,disabled_wait_psw - lpswe 0(%r1) + larl %r1,disabled_wait_psw + lpswe 0(%r1) +1: j 1b /*
Possibly dumb question: Does checking code now figure out correctly that code flow does not continue after disabled_wait()?
Re: [PATCH 5/8] pc-bios: s390x: Move panic() into header and add infinite loop
Quoted 50 lines · Cornelia Huck
Quoted 2 lines · On Tue, 24 Mar 2020 11:08:44 -0400 Janosch Frank <[email protected]> wrote:
panic()was defined for the ccw and net bios, i.e. twice, so it's cleaner to rather put it into the header.They were also slightly different, so unifying them makes sense.
Quoted 42 lines
Also let's add an infinite loop into the assembly of
disabled_wait()so the caller doesn't need to take care of it.Signed-off-by Janosch Frank <[email protected]>Reviewed-by Pierre Morel <[email protected]>--- pc-bios/s390-ccw/main.c | 7 ------- pc-bios/s390-ccw/netmain.c | 8 -------- pc-bios/s390-ccw/s390-ccw.h | 7 ++++++- pc-bios/s390-ccw/start.S | 5 +++-- 4 files changed, 9 insertions(+), 18 deletions(-)pc-bios/s390-ccw/s390-ccw.h +6
-0@@ -91,6 +90,12 @@ bool menu_is_enabled_enum(void);#define MAX_BOOT_ENTRIES 31 +static inline void panic (const char *string) +{ +sclp_print (string); +disabled_wait (); +} +static inline void fill_hex (char *out,unsigned char val) {const char hex[] ="0123456789abcdef" ;pc-bios/s390-ccw/start.S +3
-2@@ -47,8 +47,9 @@ memsetxc: */ .globl disabled_wait disabled_wait: - larl %r1,disabled_wait_psw - lpswe 0(%r1) + larl %r1,disabled_wait_psw + lpswe 0(%r1) +1: j 1b
Quoted 5 lines
pc-bios/s390-ccw/start.S memsetxc: · line 55
Quoted 1 line
pc-bios/s390-ccw/start.S +0
-0/*Possibly dumb question: Does checking code now figure out correctly that code flow does not continue after
disabled_wait()?
Which checking code?
I could certainly add "__attribute__ ((__noreturn__))" if needed.
Re: [PATCH 5/8] pc-bios: s390x: Move panic() into header and add infinite loop
Quoted 51 lines · On Thu, 14 May 2020 13:27:20 +0200 Janosch Frank <[email protected]> wrote:
Quoted 50 lines · Cornelia Huck
Quoted 2 lines · On Tue, 24 Mar 2020 11:08:44 -0400 Janosch Frank <[email protected]> wrote:
panic()was defined for the ccw and net bios, i.e. twice, so it's cleaner to rather put it into the header.They were also slightly different, so unifying them makes sense.
Quoted 42 lines
Also let's add an infinite loop into the assembly of
disabled_wait()so the caller doesn't need to take care of it.Signed-off-by Janosch Frank <[email protected]>Reviewed-by Pierre Morel <[email protected]>--- pc-bios/s390-ccw/main.c | 7 ------- pc-bios/s390-ccw/netmain.c | 8 -------- pc-bios/s390-ccw/s390-ccw.h | 7 ++++++- pc-bios/s390-ccw/start.S | 5 +++-- 4 files changed, 9 insertions(+), 18 deletions(-)pc-bios/s390-ccw/s390-ccw.h +6
-0@@ -91,6 +90,12 @@ bool menu_is_enabled_enum(void);#define MAX_BOOT_ENTRIES 31 +static inline void panic (const char *string) +{ +sclp_print (string); +disabled_wait (); +} +static inline void fill_hex (char *out,unsigned char val) {const char hex[] ="0123456789abcdef" ;pc-bios/s390-ccw/start.S +3
-2@@ -47,8 +47,9 @@ memsetxc: */ .globl disabled_wait disabled_wait: - larl %r1,disabled_wait_psw - lpswe 0(%r1) + larl %r1,disabled_wait_psw + lpswe 0(%r1) +1: j 1b
Quoted 7 lines
Quoted 5 lines
pc-bios/s390-ccw/start.S memsetxc: · line 55
Quoted 1 line
pc-bios/s390-ccw/start.S +0
-0/*Possibly dumb question: Does checking code now figure out correctly that code flow does not continue after
disabled_wait()?Which checking code?
Things like e.g. Coverity.
Quoted 1 line
I could certainly add "
__attribute__((__noreturn__))" if needed.
Probably would not hurt.
Re: [PATCH 5/8] pc-bios: s390x: Move panic() into header and add infinite loop
In reply to Janosch FrankQuoted 20 lines · Janosch Frank
panic()was defined for the ccw and net bios, i.e. twice, so it's cleaner to rather put it into the header.Also let's add an infinite loop into the assembly of
disabled_wait()so the caller doesn't need to take care of it.Signed-off-by Janosch Frank <[email protected]>Reviewed-by Pierre Morel <[email protected]>--- pc-bios/s390-ccw/main.c | 7 ------- pc-bios/s390-ccw/netmain.c | 8 -------- pc-bios/s390-ccw/s390-ccw.h | 7 ++++++- pc-bios/s390-ccw/start.S | 5 +++-- 4 files changed, 9 insertions(+), 18 deletions(-)pc-bios/s390-ccw/main.c +0
-0
pc-bios/s390-ccw/main.c void write_iplb_location(void) · line 54
Quoted 9 lines
pc-bios/s390-ccw/main.c +0
-6@@ -46,13 +46,6 @@ void write_iplb_location(void) lowcore->ptr_iplb =ptr2u32 (&iplb); } -void panic (const char *string) -{ -sclp_print (string); -disabled_wait (); -while (1 ) { } -}
I remember there was a reason why to add the endless loop afterwards. Maybe because some special machine checks can actually wake it up? Or buggy hypervisor?
Anyhow, the kernel also does
__load_psw(psw);
while (1);
so it's best we keep that.
With the endless loop re-added
Signature · 3 lines
Thanks, David / dhildenb
Re: [PATCH 5/8] pc-bios: s390x: Move panic() into header and add infinite loop
Quoted 37 lines · David Hildenbrand
Quoted 20 lines · Janosch Frank
panic()was defined for the ccw and net bios, i.e. twice, so it's cleaner to rather put it into the header.Also let's add an infinite loop into the assembly of
disabled_wait()so the caller doesn't need to take care of it.Signed-off-by Janosch Frank <[email protected]>Reviewed-by Pierre Morel <[email protected]>--- pc-bios/s390-ccw/main.c | 7 ------- pc-bios/s390-ccw/netmain.c | 8 -------- pc-bios/s390-ccw/s390-ccw.h | 7 ++++++- pc-bios/s390-ccw/start.S | 5 +++-- 4 files changed, 9 insertions(+), 18 deletions(-)pc-bios/s390-ccw/main.c +0
-0pc-bios/s390-ccw/main.c void write_iplb_location(void) · line 54
Quoted 9 lines
pc-bios/s390-ccw/main.c +0
-6@@ -46,13 +46,6 @@ void write_iplb_location(void) lowcore->ptr_iplb =ptr2u32 (&iplb); } -void panic (const char *string) -{ -sclp_print (string); -disabled_wait (); -while (1 ) { } -}I remember there was a reason why to add the endless loop afterwards. Maybe because some special machine checks can actually wake it up? Or buggy hypervisor?
Anyhow, the kernel also does
Quoted 7 lines
__load_psw(psw);
while (1);so it's best we keep that.
With the endless loop re-added
Well, I added a loop into the disabled_wait assembly and removed it from the C code. It's even in the commit message.
Quoted 3 lines
Reviewed-by David Hildenbrand <[email protected]>
Re: [PATCH 5/8] pc-bios: s390x: Move panic() into header and add infinite loop
Quoted 41 lines · Janosch Frank
Quoted 40 lines · David Hildenbrand
Quoted 20 lines · Janosch Frank
panic()was defined for the ccw and net bios, i.e. twice, so it's cleaner to rather put it into the header.Also let's add an infinite loop into the assembly of
disabled_wait()so the caller doesn't need to take care of it.Signed-off-by Janosch Frank <[email protected]>Reviewed-by Pierre Morel <[email protected]>--- pc-bios/s390-ccw/main.c | 7 ------- pc-bios/s390-ccw/netmain.c | 8 -------- pc-bios/s390-ccw/s390-ccw.h | 7 ++++++- pc-bios/s390-ccw/start.S | 5 +++-- 4 files changed, 9 insertions(+), 18 deletions(-)pc-bios/s390-ccw/main.c +0
-0pc-bios/s390-ccw/main.c void write_iplb_location(void) · line 54
Quoted 9 lines
pc-bios/s390-ccw/main.c +0
-6@@ -46,13 +46,6 @@ void write_iplb_location(void) lowcore->ptr_iplb =ptr2u32 (&iplb); } -void panic (const char *string) -{ -sclp_print (string); -disabled_wait (); -while (1 ) { } -}I remember there was a reason why to add the endless loop afterwards. Maybe because some special machine checks can actually wake it up? Or buggy hypervisor?
Anyhow, the kernel also does
__load_psw(psw);
while (1);
Quoted 7 lines
Quoted 4 lines
so it's best we keep that.
With the endless loop re-added
Well, I added a loop into the
disabled_waitassembly and removed it from the C code. It's even in the commit message.
Whops, missed that, looks good to me then!
Signature · 3 lines
Thanks, David / dhildenb
PATCH 6/8 pc-bios: s390x: Use ebcdic2ascii table
In reply to Janosch FrankWhy should we do conversion of a ebcdic value if we have a handy table where we coul look up the ascii value instead?
--- pc-bios/s390-ccw/bootmap.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
pc-bios/s390-ccw/bootmap.c +1 -3
@@ -328,9 +328,7 @@ static void print_eckd_ldl_msg(ECKD_IPL_mode_t mode) msg[0 ] ='2' ;break ;default : - msg[0 ] = vlbl->LDL_version; - msg[0 ] &=0x0f ;/* convert EBCDIC */ - msg[0 ] |=0x30 ;/* to ASCII (digit) */ + msg[0 ] = ebc2asc[vlbl->LDL_version]; msg[1 ] ='?' ;break ; }
Signature · 1 line
2.25.1
Re: [PATCH 6/8] pc-bios: s390x: Use ebcdic2ascii table
Quoted 14 lines · Janosch Frank
Why should we do conversion of a ebcdic value if we have a handy table where we coul look up the ascii value instead?
Signed-off-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/bootmap.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)pc-bios/s390-ccw/bootmap.c +0
-0
pc-bios/s390-ccw/bootmap.c static void print_eckd_ldl_msg(ECKD_IPL_mode_t mode) · line 334
Quoted 10 lines
pc-bios/s390-ccw/bootmap.c +1
-3@@ -328,9 +328,7 @@ static void print_eckd_ldl_msg(ECKD_IPL_mode_t mode) msg[0 ] ='2' ;break ;default : - msg[0 ] = vlbl->LDL_version; - msg[0 ] &=0x0f ;/* convert EBCDIC */ - msg[0 ] |=0x30 ;/* to ASCII (digit) */ + msg[0 ] = ebc2asc[vlbl->LDL_version]; msg[1 ] ='?' ;break ; }
Signature · 3 lines
Thanks, David / dhildenb
PATCH 7/8 pc-bios: s390x: Replace 0x00 with 0x0 or 0
In reply to Janosch Frank0x00 looks odd, time to replace it with 0 or 0x0 (for pointers).
--- pc-bios/s390-ccw/dasd-ipl.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
pc-bios/s390-ccw/dasd-ipl.c +7 -7
@@ -98,18 +98,18 @@ static int run_dynamic_ccw_program(SubChannelId schid, uint16_t cutype,static void make_readipl (void ) { -Ccw0 *ccwIplRead = (Ccw0 *)0x00 ; +Ccw0 *ccwIplRead = (Ccw0 *)0x0 ;/* Create Read IPL ccw at address 0 */ ccwIplRead->cmd_code =CCW_CMD_READ_IPL ; - ccwIplRead->cda =0x00 ;/* Read into address 0x00 in main memory */ + ccwIplRead->cda =0x0 ;/* Read into address 0x00 in main memory */ ccwIplRead->chain =0 ;/* Chain flag */ ccwIplRead->count =0x18 ;/* Read 0x18 bytes of data */ }static void run_readipl (SubChannelId schid,uint16_t cutype) { -if (do_cio (schid, cutype,0x00 ,CCW_FMT0 )) { +if (do_cio (schid, cutype,0x0 ,CCW_FMT0 )) {panic ("dasd-ipl: Failed to run Read IPL channel program\n" ); } }
@@ -133,10 +133,10 @@ static void check_ipl2(uint32_t ipl2_addr) {Ccw0 *ccw =u32toptr (ipl2_addr); -if (ipl2_addr ==0x00 ) { +if (ipl2_addr ==0 ) {panic ("IPL2 address invalid. Is this disk really bootable?\n" ); } -if (ccw->cmd_code ==0x00 ) { +if (ccw->cmd_code ==0 ) {panic ("IPL2 ccw data invalid. Is this disk really bootable?\n" ); } }
@@ -161,7 +161,7 @@ static void ipl1_fixup(void)memcpy (ccwRead, (void *)0x08 ,16 );/* Disable chaining so we don't TIC to IPL2 channel program */ - ccwRead->chain =0x00 ; + ccwRead->chain =0 ; ccwSeek->cmd_code =CCW_CMD_DASD_SEEK ; ccwSeek->cda =ptr2u32 (seekData);
@@ -206,7 +206,7 @@ static void run_ipl2(SubChannelId schid, uint16_t cutype, uint32_t addr)*/ void dasd_ipl (SubChannelId schid,uint16_t cutype) { -PSWLegacy *pswl = (PSWLegacy *)0x00 ; +PSWLegacy *pswl = (PSWLegacy *)0x0 ;uint32_t ipl2_addr;/* Construct Read IPL CCW and run it to read IPL1 from boot disk */
Signature · 1 line
2.25.1
Re: [PATCH 7/8] pc-bios: s390x: Replace 0x00 with 0x0 or 0
Quoted 1 line · Janosch Frank
0x00looks odd, time to replace it with 0 or0x0(for pointers).
s/0x0/NULL/ ?
Quoted 64 lines
Signed-off-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/dasd-ipl.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)pc-bios/s390-ccw/dasd-ipl.c +7
-7@@ -98,18 +98,18 @@ static int run_dynamic_ccw_program(SubChannelId schid, uint16_t cutype,static void make_readipl (void ) { -Ccw0 *ccwIplRead = (Ccw0 *)0x00 ; +Ccw0 *ccwIplRead = (Ccw0 *)0x0 ;/* Create Read IPL ccw at address 0 */ ccwIplRead->cmd_code =CCW_CMD_READ_IPL ; - ccwIplRead->cda =0x00 ;/* Read into address 0x00 in main memory */ + ccwIplRead->cda =0x0 ;/* Read into address 0x00 in main memory */ ccwIplRead->chain =0 ;/* Chain flag */ ccwIplRead->count =0x18 ;/* Read 0x18 bytes of data */ }static void run_readipl (SubChannelId schid,uint16_t cutype) { -if (do_cio (schid, cutype,0x00 ,CCW_FMT0 )) { +if (do_cio (schid, cutype,0x0 ,CCW_FMT0 )) {panic ("dasd-ipl: Failed to run Read IPL channel program\n" ); } }@@ -133,10 +133,10 @@ static void check_ipl2(uint32_t ipl2_addr) {Ccw0 *ccw =u32toptr (ipl2_addr); -if (ipl2_addr ==0x00 ) { +if (ipl2_addr ==0 ) {panic ("IPL2 address invalid. Is this disk really bootable?\n" ); } -if (ccw->cmd_code ==0x00 ) { +if (ccw->cmd_code ==0 ) {panic ("IPL2 ccw data invalid. Is this disk really bootable?\n" ); } }@@ -161,7 +161,7 @@ static void ipl1_fixup(void)memcpy (ccwRead, (void *)0x08 ,16 );/* Disable chaining so we don't TIC to IPL2 channel program */ - ccwRead->chain =0x00 ; + ccwRead->chain =0 ; ccwSeek->cmd_code =CCW_CMD_DASD_SEEK ; ccwSeek->cda =ptr2u32 (seekData);@@ -206,7 +206,7 @@ static void run_ipl2(SubChannelId schid, uint16_t cutype, uint32_t addr)*/ void dasd_ipl (SubChannelId schid,uint16_t cutype) { -PSWLegacy *pswl = (PSWLegacy *)0x00 ; +PSWLegacy *pswl = (PSWLegacy *)0x0 ;uint32_t ipl2_addr;/* Construct Read IPL CCW and run it to read IPL1 from boot disk */
Signature · 3 lines
Thanks, David / dhildenb
Re: [PATCH 7/8] pc-bios: s390x: Replace 0x00 with 0x0 or 0
Quoted 4 lines · David Hildenbrand
Quoted 1 line · Janosch Frank
0x00looks odd, time to replace it with 0 or0x0(for pointers).s/0x0/NULL/ ?
I'd like to avoid NULL if I refer to offset 0 of the memory and only use it to indicate that I purposely do not assign any specific value to a pointer.
Quoted 67 lines
Quoted 65 lines
Signed-off-by Janosch Frank <[email protected]>--- pc-bios/s390-ccw/dasd-ipl.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)pc-bios/s390-ccw/dasd-ipl.c +7
-7@@ -98,18 +98,18 @@ static int run_dynamic_ccw_program(SubChannelId schid, uint16_t cutype,static void make_readipl (void ) { -Ccw0 *ccwIplRead = (Ccw0 *)0x00 ; +Ccw0 *ccwIplRead = (Ccw0 *)0x0 ;/* Create Read IPL ccw at address 0 */ ccwIplRead->cmd_code =CCW_CMD_READ_IPL ; - ccwIplRead->cda =0x00 ;/* Read into address 0x00 in main memory */ + ccwIplRead->cda =0x0 ;/* Read into address 0x00 in main memory */ ccwIplRead->chain =0 ;/* Chain flag */ ccwIplRead->count =0x18 ;/* Read 0x18 bytes of data */ }static void run_readipl (SubChannelId schid,uint16_t cutype) { -if (do_cio (schid, cutype,0x00 ,CCW_FMT0 )) { +if (do_cio (schid, cutype,0x0 ,CCW_FMT0 )) {panic ("dasd-ipl: Failed to run Read IPL channel program\n" ); } }@@ -133,10 +133,10 @@ static void check_ipl2(uint32_t ipl2_addr) {Ccw0 *ccw =u32toptr (ipl2_addr); -if (ipl2_addr ==0x00 ) { +if (ipl2_addr ==0 ) {panic ("IPL2 address invalid. Is this disk really bootable?\n" ); } -if (ccw->cmd_code ==0x00 ) { +if (ccw->cmd_code ==0 ) {panic ("IPL2 ccw data invalid. Is this disk really bootable?\n" ); } }@@ -161,7 +161,7 @@ static void ipl1_fixup(void)memcpy (ccwRead, (void *)0x08 ,16 );/* Disable chaining so we don't TIC to IPL2 channel program */ - ccwRead->chain =0x00 ; + ccwRead->chain =0 ; ccwSeek->cmd_code =CCW_CMD_DASD_SEEK ; ccwSeek->cda =ptr2u32 (seekData);@@ -206,7 +206,7 @@ static void run_ipl2(SubChannelId schid, uint16_t cutype, uint32_t addr)*/ void dasd_ipl (SubChannelId schid,uint16_t cutype) { -PSWLegacy *pswl = (PSWLegacy *)0x00 ; +PSWLegacy *pswl = (PSWLegacy *)0x0 ;uint32_t ipl2_addr;/* Construct Read IPL CCW and run it to read IPL1 from boot disk */
PATCH 8/8 pc-bios: s390x: Make u32 ptr check explicit
In reply to Janosch FrankLet's make it a bit more clear that we check the full 64 bits to fit into the 32 we return.
--- pc-bios/s390-ccw/helper.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
pc-bios/s390-ccw/helper.h +1 -1
@@ -18,7 +18,7 @@/* Avoids compiler warnings when casting a pointer to a u32 */ static inline uint32_t ptr2u32 (void *ptr) { -IPL_assert ((uint64_t )ptr <=0xffffffff ,"ptr2u32: ptr too large" ); +IPL_assert ((uint64_t )ptr <=0xfffffffful ,"ptr2u32: ptr too large" );return (uint32_t )(uint64_t )ptr; }
Signature · 1 line
2.25.1
Re: [PATCH 8/8] pc-bios: s390x: Make u32 ptr check explicit
Quoted 14 lines · Janosch Frank
Let's make it a bit more clear that we check the full 64 bits to fit into the 32 we return.
Signed-off-by Janosch Frank <[email protected]>Suggested-by David Hildenbrand <[email protected]>--- pc-bios/s390-ccw/helper.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)pc-bios/s390-ccw/helper.h +0
-0
pc-bios/s390-ccw/helper.h line 21
Quoted 5 lines
pc-bios/s390-ccw/helper.h +1
-1@@ -18,7 +18,7 @@/* Avoids compiler warnings when casting a pointer to a u32 */ static inline uint32_t ptr2u32 (void *ptr) { -IPL_assert ((uint64_t )ptr <=0xffffffff ,"ptr2u32: ptr too large" ); +IPL_assert ((uint64_t )ptr <=0xfffffffful ,"ptr2u32: ptr too large" );
wonder if we should even do ull.
Quoted 4 lines
pc-bios/s390-ccw/helper.h +0
-0return (uint32_t )(uint64_t )ptr; }
Signature · 3 lines
Thanks, David / dhildenb
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series seems to have some coding style problems. See output below for more information:
Subject: [PATCH 0/8] pc-bios: s390x: Cleanup part 1
Message-id: [email protected]
Type: series
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Switched to a new branch 'test'
631f5fb pc-bios: s390x: Make u32 ptr check explicit
31a77a2 pc-bios: s390x: Replace 0x00 with 0x0 or 0
e7c3314 pc-bios: s390x: Use ebcdic2ascii table
67bf6cc pc-bios: s390x: Move panic() into header and add infinite loop 0430d47 pc-bios: s390x: Use PSW masks where possible 5dc5f58 pc-bios: s390x: Rename and use PSW_MASK_ZMODE constant 49da8ad pc-bios: s390x: Get rid of magic offsets into the lowcore 61a8ff1 pc-bios: s390x: Consolidate timing functions into time.h
=== OUTPUT BEGIN ===
1/8 Checking commit 61a8ff1495d4 (pc-bios: s390x: Consolidate timing functions into time.h)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #102:
new file mode 100644
total: 0 errors, 1 warnings, 167 lines checked
Patch 1/8 has style problems, please review. If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
2/8 Checking commit 49da8ad037ea (pc-bios: s390x: Get rid of magic offsets into the lowcore)
ERROR: spaces required around that ':' (ctx:VxV)
#29: FILE: pc-bios/s390-ccw/cio.h:127:
+ __u16 cssid:8;
^ERROR: code indent should never use tabs
#30: FILE: pc-bios/s390-ccw/cio.h:128:
+^I __u16:4;$
ERROR: spaces required around that ':' (ctx:VxV)
#31: FILE: pc-bios/s390-ccw/cio.h:129:
+ __u16 m:1;
^ERROR: spaces required around that ':' (ctx:VxV)
#32: FILE: pc-bios/s390-ccw/cio.h:130:
+ __u16 ssid:2;
^ERROR: spaces required around that ':' (ctx:VxV)
#33: FILE: pc-bios/s390-ccw/cio.h:131:
+ __u16 one:1;
^total: 5 errors, 0 warnings, 37 lines checked
Patch 2/8 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
3/8 Checking commit 5dc5f5840149 (pc-bios: s390x: Rename and use PSW_MASK_ZMODE constant) 4/8 Checking commit 0430d47d5125 (pc-bios: s390x: Use PSW masks where possible) 5/8 Checking commit 67bf6cc8c901 (pc-bios: s390x: Move panic() into header and add infinite loop) 6/8 Checking commit e7c33142a550 (pc-bios: s390x: Use ebcdic2ascii table)
7/8 Checking commit 31a77a28b0f3 (pc-bios: s390x: Replace 0x00 with 0x0 or 0)
8/8 Checking commit 631f5fb35427 (pc-bios: s390x: Make u32 ptr check explicit) === OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Quoted 8 lines · Janosch Frank
The bios is in dire need for a cleanup as there are still a lot of magic constants being used throughout as well as duplicated code.
In the first part of this series we consolidate constants and functions, as well as doing some minor cleanups and fixes.
The patches are based on my protvirt branch and are available here:
https://github.com/frankjaa/qemu/pull/new/cleanup_bios
Ping
It's not urgent, but I don't want it to get buried and forgotten.
Quoted 29 lines
Janosch Frank (8):
pc-bios: s390x: Consolidate timing functions intotime.h
pc-bios: s390x: Get rid of magic offsets into the lowcore
pc-bios: s390x: Rename and usePSW_MASK_ZMODEconstant
pc-bios: s390x: Use PSW masks where possible
pc-bios: s390x: Movepanic()into header and add infinite loop
pc-bios: s390x: Use ebcdic2ascii table
pc-bios: s390x: Replace0x00with0x0or 0
pc-bios: s390x: Make u32 ptr check explicitpc-bios/s390-ccw/bootmap.c | 4 +--- pc-bios/s390-ccw/cio.h | 17 +++++++++------ pc-bios/s390-ccw/dasd-ipl.c | 17 +++++++-------- pc-bios/s390-ccw/helper.h | 2 +- pc-bios/s390-ccw/jump2ipl.c | 10 ++++----- pc-bios/s390-ccw/main.c | 15 +++---------- pc-bios/s390-ccw/menu.c | 1 + pc-bios/s390-ccw/netmain.c | 23 +++----------------- pc-bios/s390-ccw/s390-arch.h | 4 +++- pc-bios/s390-ccw/s390-ccw.h | 25 ++++++---------------- pc-bios/s390-ccw/start.S | 5 +++-- pc-bios/s390-ccw/time.h | 39 ++++++++++++++++++++++++++++++++++ pc-bios/s390-ccw/virtio-net.c | 1 + pc-bios/s390-ccw/virtio-scsi.c | 1 + pc-bios/s390-ccw/virtio.c | 18 +++------------- 15 files changed, 88 insertions(+), 94 deletions(-) create mode 100644 pc-bios/s390-ccw/time.h
Quoted 4 lines · Janosch Frank
Quoted 3 lines · Janosch Frank
The bios is in dire need for a cleanup as there are still a lot of magic constants being used throughout as well as duplicated code.
Quoted 9 lines
Quoted 5 lines
In the first part of this series we consolidate constants and functions, as well as doing some minor cleanups and fixes.
The patches are based on my protvirt branch and are available here:
https://github.com/frankjaa/qemu/pull/new/cleanup_biosPing
It's not urgent, but I don't want it to get buried and forgotten.
Let's wait for Thomas, I currently don't have any capacity to review this.
Signature · 3 lines
Thanks, David / dhildenb
Quoted 8 lines · On Thu, 30 Apr 2020 16:50:25 +0200 David Hildenbrand <[email protected]> wrote:
Quoted 7 lines · Janosch Frank
Quoted 6 lines · Janosch Frank
The bios is in dire need for a cleanup as there are still a lot of magic constants being used throughout as well as duplicated code.
In the first part of this series we consolidate constants and functions, as well as doing some minor cleanups and fixes.
Quoted 10 lines
Quoted 6 lines
Quoted 2 lines
The patches are based on my protvirt branch and are available here:
https://github.com/frankjaa/qemu/pull/new/cleanup_biosPing
It's not urgent, but I don't want it to get buried and forgotten.Let's wait for Thomas, I currently don't have any capacity to review this.
From the feedback, I assume there will be a v2 anyway?
Quoted 18 lines · Cornelia Huck
Quoted 15 lines · On Thu, 30 Apr 2020 16:50:25 +0200 David Hildenbrand <[email protected]> wrote:
Quoted 13 lines · Janosch Frank
Quoted 8 lines · Janosch Frank
The bios is in dire need for a cleanup as there are still a lot of magic constants being used throughout as well as duplicated code.
In the first part of this series we consolidate constants and functions, as well as doing some minor cleanups and fixes.
The patches are based on my protvirt branch and are available here:
https://github.com/frankjaa/qemu/pull/new/cleanup_biosPing
It's not urgent, but I don't want it to get buried and forgotten.
Quoted 6 lines
Quoted 3 lines
Let's wait for Thomas, I currently don't have any capacity to review this.
From the feedback, I assume there will be a v2 anyway?
I'll send out a new version soonish(TM)