Add PCIe overlay for am642-phyboard-electra
Subsystems (2)
v3 cover Add PCIe overlay for am642-phyboard-electra
Remove PCIe pinmuxing from the am642-phyboard-electra device tree and provide an overlay to mux and enable PCIe.
v3:
- Fix typo from .dtbs to -dtbs in Makefile for overlay testing
v2:
- Fix double space typo
- Remove redundant status = okay
Nathan Morrisson (2):
arm64: dts: ti: am642-phyboard-electra: Remove PCIe pinmuxing
arm64: dts: ti: am642-phyboard-electra: Add overlay to enable PCIe
arch/arm64/boot/dts/ti/Makefile | 3 + .../k3-am642-phyboard-electra-pcie-usb2.dtso | 87 +++++++++++++++++++ .../dts/ti/k3-am642-phyboard-electra-rdk.dts | 12 --- 3 files changed, 90 insertions(+), 12 deletions(-) create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-pcie-usb2.dtso
Signature · 1 line
2.25.1
PATCH v3 1/2 arm64: dts: ti: am642-phyboard-electra: Remove PCIe pinmuxing
Remove pinmuxing for PCIe so that we can add it in an overlay.
---
v3: No change
v2: No change
.../boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 12 ------------ 1 file changed, 12 deletions(-)
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts +0 -12
@@ -190,18 +190,6 @@ AM64X_IOPAD(0x02a8, PIN_OUTPUT, 0) /* (E19) USB0_DRVVBUS */ >; }; - pcie_usb_sel_pins_default: pcie-usb-sel-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x017c, PIN_OUTPUT, 7) /* (T1) PRG0_PRU0_GPO7.GPIO1_7 */ - >; - }; - - pcie0_pins_default: pcie0-default-pins { - pinctrl-single,pins = < - AM64X_IOPAD(0x0098, PIN_OUTPUT, 7) /* (W19) GPMC0_WAIT0.GPIO0_37 */ - >; - }; - user_leds_pins_default: user-leds-default-pins { pinctrl-single,pins = < AM64X_IOPAD(0x003c, PIN_OUTPUT, 7) /* (T20) GPMC0_AD0.GPIO0_15 */
Signature · 1 line
2.25.1
PATCH v3 2/2 arm64: dts: ti: am642-phyboard-electra: Add overlay to enable PCIe
In reply to Nathan MorrissonAdd an overlay to enable PCIe on the am642-phyboard-electra. This will disable USB3 and restrict us to USB2.
---
v3:
- Fix typo from .dtbs to -dtbs in Makefile for overlay testing
v2:
- Fix double space typo
- Remove redundant status = okay
arch/arm64/boot/dts/ti/Makefile | 3 + .../k3-am642-phyboard-electra-pcie-usb2.dtso | 87 +++++++++++++++++++ 2 files changed, 90 insertions(+) create mode 100644 arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-pcie-usb2.dtso
arch/arm64/boot/dts/ti/Makefile +3 -0
@@ -49,6 +49,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-pcie.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-hummingboard-t-usb3.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-gpio-fan.dtbo +dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-pcie-usb2.dtbo dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
@@ -134,6 +135,8 @@ k3-am642-evm-icssg1-dualemac-dtbs := \ k3-am642-evm.dtb k3-am642-evm-icssg1-dualemac.dtbo k3-am642-phyboard-electra-gpio-fan-dtbs := \ k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-gpio-fan.dtbo +k3-am642-phyboard-electra-pcie-usb2-dtbs := \ + k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-pcie-usb2.dtbo k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \ k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-pcie-usb2.dtso new file +87 -0
87 lines not on this page · raw message
Signature · 1 line
2.25.1
Vignesh Raghavendra
maintainerRe: [PATCH v3 2/2] arm64: dts: ti: am642-phyboard-electra: Add overlay to enable PCIe
Hi
Quoted 3 lines · Nathan Morrisson
Add an overlay to enable PCIe on the am642-phyboard-electra. This will disable USB3 and restrict us to USB2.
Commit message still doesn't answer why? Could you explain why the overlay is needed
I am guessing USB3 and PCIe are exclusive at SoC level and board has capabilities for both? So, please add the same to commit message.
[...]
Signature · 2 lines
Regards Vignesh