Skip to contentSkip to conversation

: spdif hw entry fails to work in multi

ALSA - driver 0000572 [email protected] 1 participant 1 message Jul 8, 2005

lore
Share & tools
lore
#0 lore raw

The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=572>
======================================================================

Reported By:                ramendik
Assigned To:                tiwai
======================================================================
Project:                    ALSA - driver
Issue ID:                   572
Category:                   PCI - intel8x0
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     closed
Distribution:               RH-based
Kernel Version:             2.6.8.1, with alsa 1.0.7rc1 plus patches from bug

0000505
Resolution: fixed
Fixed in Version:
======================================================================

Date Submitted:             10-08-2004 02:27 CEST
Last Modified:              07-08-2005 10:38 CEST

======================================================================
Summary: spdif hw entry fails to work in multi
Description:
After bug 0000505 was fixed, hw:0,0 only plays to analog devices, and hw:0,4 to spdif. As one needs output in both, I tried to use .asoundrc , and therefore needed to use the "multi" pcm type in order to unite these two (and then route). This is what I put in .asoundrc

pcm.whole {
    type multi
    slaves.a.pcm "hw:0,0"
    slaves.a.channels 2
    slaves.b.pcm "hw:0,4"
    slaves.b.channels 2
    bindings.0.slave a
    bindings.0.channel 0
    bindings.1.slave a
    bindings.1.channel 1
    bindings.2.slave b
    bindings.2.channel 0
    bindings.3.slave b
    bindings.3.channel 1
}
pcm.rt {
    type route
    slave.pcm "whole"
    ttable.0.0 1
    ttable.1.1 1
    ttable.0.2 1
    ttable.1.3 1
}

The ttable may be wrong - I could not find a sane description anywhere - but I tried many variants, and besides, playing to "whole" bypasses this.

So here's what I get when playing to "rt" OR to "whole" via alsaplayer :

$ alsaplayer -d whole test.wav 
error on set_channels (2)
Unavailable hw params:
ACCESS:  RW_INTERLEAVED
FORMAT:  S16_LE
SUBFORMAT:  STD
SAMPLE_BITS: 16
FRAME_BITS: 64
CHANNELS: 4
RATE: 44100
PERIOD_TIME: (181 371520)
PERIOD_SIZE: [8 16384]
PERIOD_BYTES: [64 131072]
PERIODS: [1 1024]
BUFFER_TIME: (181 371520)
BUFFER_SIZE: [8 16384]
BUFFER_BYTES: [64 131072]
TICK_TIME: 1000
error on set_channels (2)
Unavailable hw params:
ACCESS:  RW_INTERLEAVED
FORMAT:  S16_LE
SUBFORMAT:  STD
SAMPLE_BITS: 16
FRAME_BITS: 64
CHANNELS: 4
RATE: 44100
PERIOD_TIME: (181 371520)
PERIOD_SIZE: [8 16384]
PERIOD_BYTES: [64 131072]
PERIODS: [1 1024]
BUFFER_TIME: (181 371520)
BUFFER_SIZE: [8 16384]
BUFFER_BYTES: [64 131072]
TICK_TIME: 1000
failed to configure output device...trying OSS

then alsaplayer hangs until interrupted.

When I comment out everything related to slave b, "whole" seems to work (without spdif output, of course). So this seems like a bug in the spdif device.
======================================================================

----------------------------------------------------------------------
ramendik - 10-13-04 17:31
----------------------------------------------------------------------
1.0.7rc2 has patched ok, but then failed to compile inside kernel 2.6.8.1. And it's not about the patch - the failure was in core/rtctimer.o .

Perhaps I can stick intel_i8x0.c from 1.0.7rc2 into 1.0.7rc1? Or, perhaps wait for kernel 2.6.9 ?

----------------------------------------------------------------------
tiwai - 10-14-04 12:37
----------------------------------------------------------------------
Just copying may not work. I don't know of compile problems for rtctimer.c. Please file the bug report about it.

Issue History
Date Modified Username Field Change
======================================================================

10-08-04 02:27 ramendik       New Issue                                    
10-08-04 02:27 ramendik       Distribution              => RH-based        
10-08-04 02:27 ramendik       Kernel Version            => 2.6.8.1, with alsa
1.0.7rc1 plus patches from bug 0000505
10-08-04 02:31 ramendik       Issue Monitored: ramendik                    
10-08-04 12:13 tiwai          Note Added: 0002045                          
10-08-04 12:29 ramendik       Note Added: 0002048                          
10-08-04 12:42 tiwai          Status                   new => resolved     
10-08-04 12:42 tiwai          Resolution               open => not an issue
10-08-04 12:42 tiwai          Assigned To               => tiwai           
10-08-04 12:42 tiwai          Note Added: 0002049                          
10-11-04 15:39 tiwai          Status                   resolved => feedback
10-11-04 15:39 tiwai          Resolution               not an issue => reopened
10-11-04 15:39 tiwai          Note Added: 0002079                          
10-11-04 15:39 tiwai          File Added: ich-analog-spdif-dup.dif              
10-13-04 06:43 ramendik       Note Added: 0002110                          
10-13-04 10:49 tiwai          Note Added: 0002117                          
10-13-04 17:31 ramendik       Note Added: 0002128                          
10-14-04 12:37 tiwai          Note Added: 0002141                          
04-09-05 16:19 jdthood        Status                   feedback => resolved
04-09-05 16:19 jdthood        Resolution               reopened => fixed   
04-09-05 16:19 jdthood        Description Updated                          
07-08-05 10:38 perex          Status                   resolved => closed  

======================================================================

-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar