: spdif hw entry fails to work in multi
The following issue has been CLOSED
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=572>
======================================================================
Reported By: ramendik Assigned To: tiwai ====================================================================== Project: ALSA - driver Issue ID: 572 Category: PCI - intel8x0 Reproducibility: always Severity: major Priority: normal Status: closed Distribution: RH-based Kernel Version: 2.6.8.1, with alsa 1.0.7rc1 plus patches from bug
0000505
Resolution: fixed
Fixed in Version:
======================================================================
Date Submitted: 10-08-2004 02:27 CEST Last Modified: 07-08-2005 10:38 CEST
======================================================================
Summary: spdif hw entry fails to work in multi
Description:
After bug 0000505 was fixed, hw:0,0 only plays to analog devices, and hw:0,4 to spdif. As one needs output in both, I tried to use .asoundrc , and therefore needed to use the "multi" pcm type in order to unite these two (and then route). This is what I put in .asoundrc
pcm.whole {
type multi
slaves.a.pcm "hw:0,0"
slaves.a.channels 2
slaves.b.pcm "hw:0,4"
slaves.b.channels 2
bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave b
bindings.2.channel 0
bindings.3.slave b
bindings.3.channel 1
}pcm.rt {
type route
slave.pcm "whole"
ttable.0.0 1
ttable.1.1 1
ttable.0.2 1
ttable.1.3 1
}The ttable may be wrong - I could not find a sane description anywhere - but I tried many variants, and besides, playing to "whole" bypasses this.
So here's what I get when playing to "rt" OR to "whole" via alsaplayer :
$ alsaplayer -d whole test.wav error on set_channels (2) Unavailable hw params: ACCESS: RW_INTERLEAVED FORMAT: S16_LE SUBFORMAT: STD SAMPLE_BITS: 16 FRAME_BITS: 64 CHANNELS: 4 RATE: 44100 PERIOD_TIME: (181 371520) PERIOD_SIZE: [8 16384] PERIOD_BYTES: [64 131072] PERIODS: [1 1024] BUFFER_TIME: (181 371520) BUFFER_SIZE: [8 16384] BUFFER_BYTES: [64 131072] TICK_TIME: 1000 error on set_channels (2) Unavailable hw params: ACCESS: RW_INTERLEAVED FORMAT: S16_LE SUBFORMAT: STD SAMPLE_BITS: 16 FRAME_BITS: 64 CHANNELS: 4 RATE: 44100 PERIOD_TIME: (181 371520) PERIOD_SIZE: [8 16384] PERIOD_BYTES: [64 131072] PERIODS: [1 1024] BUFFER_TIME: (181 371520) BUFFER_SIZE: [8 16384] BUFFER_BYTES: [64 131072] TICK_TIME: 1000 failed to configure output device...trying OSS
then alsaplayer hangs until interrupted.
When I comment out everything related to slave b, "whole" seems to work (without spdif output, of course). So this seems like a bug in the spdif device.
======================================================================
----------------------------------------------------------------------
ramendik - 10-13-04 17:31
----------------------------------------------------------------------
1.0.7rc2 has patched ok, but then failed to compile inside kernel 2.6.8.1. And it's not about the patch - the failure was in core/rtctimer.o .
Perhaps I can stick intel_i8x0.c from 1.0.7rc2 into 1.0.7rc1? Or, perhaps wait for kernel 2.6.9 ?
----------------------------------------------------------------------
tiwai - 10-14-04 12:37
----------------------------------------------------------------------
Just copying may not work. I don't know of compile problems for rtctimer.c. Please file the bug report about it.
Issue History
Date Modified Username Field Change
======================================================================
10-08-04 02:27 ramendik New Issue 10-08-04 02:27 ramendik Distribution => RH-based 10-08-04 02:27 ramendik Kernel Version => 2.6.8.1, with alsa 1.0.7rc1 plus patches from bug 0000505 10-08-04 02:31 ramendik Issue Monitored: ramendik 10-08-04 12:13 tiwai Note Added: 0002045 10-08-04 12:29 ramendik Note Added: 0002048 10-08-04 12:42 tiwai Status new => resolved 10-08-04 12:42 tiwai Resolution open => not an issue 10-08-04 12:42 tiwai Assigned To => tiwai 10-08-04 12:42 tiwai Note Added: 0002049 10-11-04 15:39 tiwai Status resolved => feedback 10-11-04 15:39 tiwai Resolution not an issue => reopened 10-11-04 15:39 tiwai Note Added: 0002079 10-11-04 15:39 tiwai File Added: ich-analog-spdif-dup.dif
10-13-04 06:43 ramendik Note Added: 0002110 10-13-04 10:49 tiwai Note Added: 0002117 10-13-04 17:31 ramendik Note Added: 0002128 10-14-04 12:37 tiwai Note Added: 0002141 04-09-05 16:19 jdthood Status feedback => resolved 04-09-05 16:19 jdthood Resolution reopened => fixed 04-09-05 16:19 jdthood Description Updated 07-08-05 10:38 perex Status resolved => closed
======================================================================
-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar