Skip to contentSkip to conversation

gpio: add possibility to search for gpio label name

PATCH New Heiko Schocher 6 participants 13 messages May 22, 2020 – Jul 21, 2020 GPIO

lore
Share & tools
lore
#0 lore raw

v6 cover gpio: add possibility to search for gpio label name

search for gpio label if gpio name from bankname is not found.

This makes sense on boards with different hardware verions. You can now search for the gpio label name, and can give the gpio a unique name. The real gpio pin number is not needed in board code anymore.

while at it add basic gpio hog test functions in seperate patch.

Travis:
https://travis-ci.org/github/hsdenx/u-boot-test/builds/689908393

Changes in v6:
- add reviewed by from Patrick and Fixes tag
- add Reviewed-by tag from Simon
- add additional comments from Simon:
- remove "default n" in Kconfig for SPL_DM_GPIO_LOOKUP_LABEL
- type of function in same line as the function
- add negativ test, where label is not found

Changes in v5:
- add comment from patrick, update the descriptor flags in _dm_gpio_set_dir_flags() if setting direction was OK.
- add Reviewed-by tag from Simon

Changes in v4:
- new in version 4
- rebased to current master ac14bc4169
- rebased to current master ac14bc4169

Changes in v3:
- add comment from Simon Glass
make this new function configurable through Kconfig option DM_GPIO_LOOKUP_LABEL

Changes in v2:
- add basic gpio hog test functions
- add comment from Simon Glass
move code into seperate function dm_gpio_lookup_label() add test if dm_gpio_lookup_label() works

Heiko Schocher (3):
gpio-uclass.c: save the GPIOD flags also in the gpio descriptor sandbox, test: add test for GPIO_HOG function
gpio: search for gpio label if gpio is not found through bank name

 arch/sandbox/dts/test.dts          | 20 +++++++++++
 configs/sandbox64_defconfig        |  1 +
 configs/sandbox_defconfig          |  1 +
 configs/sandbox_flattree_defconfig |  1 +
 configs/sandbox_spl_defconfig      |  1 +
 drivers/gpio/Kconfig               | 21 ++++++++++++
 drivers/gpio/gpio-uclass.c         | 54 +++++++++++++++++++++++++++---
 test/dm/gpio.c                     | 32 ++++++++++++++++++
 8 files changed, 127 insertions(+), 4 deletions(-)
Signature · 1 line
2.24.1
#1 lore raw

PATCH v6 1/3 gpio-uclass.c: save the GPIOD flags also in the gpio descriptor

save the GPIOD_ flags also in the gpio descriptor.

Fixes 788ea834124b ("gpio: add function _dm_gpio_set_dir_flags")

---

Changes in v6:
- add reviewed by from Patrick and Fixes tag

Changes in v5:
- add comment from patrick, update the descriptor flags in _dm_gpio_set_dir_flags() if setting direction was OK.

Changes in v4:
- new in version 4

Changes in v3: None
Changes in v2: None

 drivers/gpio/gpio-uclass.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpio/gpio-uclass.c +4 -4
index 9eeab22eef..f016532354 100644
@@ -600,6 +600,10 @@ static int _dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags)
 		}
 	}
 
+	/* save the flags also in descriptor */
+	if (!ret)
+		desc->flags = flags;
+
 	return ret;
 }
 
@@ -615,10 +619,6 @@ int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags)
 	flags |= desc->flags;
 	ret = _dm_gpio_set_dir_flags(desc, flags);
 
-	/* update the descriptor flags */
-	if (ret)
-		desc->flags = flags;
-
 	return ret;
 }
 
Signature · 1 line
2.24.1
#2 lore raw

PATCH v6 1/3 gpio-uclass.c: save the GPIOD flags also in the gpio descriptor

Quoted 16 lines · Heiko Schocher

save the GPIOD_ flags also in the gpio descriptor.

Fixes 788ea834124b ("gpio: add function _dm_gpio_set_dir_flags")

---

Changes in v6:
- add reviewed by from Patrick and Fixes tag

Changes in v5:
- add comment from patrick, update the descriptor flags in _dm_gpio_set_dir_flags() if setting direction was OK.

Quoted 8 lines

Changes in v4:
- new in version 4

Changes in v3: None
Changes in v2: None

 drivers/gpio/gpio-uclass.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
#3 lore raw

PATCH v6 1/3 gpio-uclass.c: save the GPIOD flags also in the gpio descriptor

In reply to Heiko Schocher

Hi Heiko

Quoted 5 lines · Heiko Schocher

save the GPIOD_ flags also in the gpio descriptor.

Fixes 788ea834124b ("gpio: add function _dm_gpio_set_dir_flags")

Thanks for this fix, without it the MMC driver of my iMX6 Hummingboard produces "Card did not respond to voltage select!" and does not work.

Quoted 34 lines

---

Changes in v6:
- add reviewed by from Patrick and Fixes tag

Changes in v5:
- add comment from patrick, update the descriptor flags in _dm_gpio_set_dir_flags() if setting direction was OK.

Changes in v4:
- new in version 4

Changes in v3: None
Changes in v2: None

  drivers/gpio/gpio-uclass.c | 8 ++++----
  1 file changed, 4 insertions(+), 4 deletions(-)
drivers/gpio/gpio-uclass.c +4 -0
index 9eeab22eef..f016532354 100644
@@ -600,6 +600,10 @@ static int _dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags)
  		}
  	}
 
+	/* save the flags also in descriptor */
+	if (!ret)
+		desc->flags = flags;
+
  	return ret;
  }
 

drivers/gpio/gpio-uclass.c int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags) · line 624

Quoted 10 lines
drivers/gpio/gpio-uclass.c +0 -4
@@ -615,10 +619,6 @@ int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags)
  	flags |= desc->flags;
  	ret = _dm_gpio_set_dir_flags(desc, flags);
 
-	/* update the descriptor flags */
-	if (ret)
-		desc->flags = flags;
-
  	return ret;
  }
 

Regards,

Walter

#4 lore raw

PATCH v6 1/3 gpio-uclass.c: save the GPIOD flags also in the gpio descriptor

Quoted 5 lines · Walter Lozano

Hi Heiko

Quoted 2 lines · Heiko Schocher

save the GPIOD_ flags also in the gpio descriptor.

Quoted 7 lines
Quoted 3 lines
Fixes 788ea834124b ("gpio: add function _dm_gpio_set_dir_flags")

Thanks for this fix, without it the MMC driver of my iMX6 Hummingboard produces "Card did not respond to voltage select!" and does not work.

Regards,

Walter

Quoted 49 lines
Quoted 35 lines

---

Changes in v6:
- add reviewed by from Patrick and Fixes tag

Changes in v5:
- add comment from patrick, update the descriptor flags ?? in _dm_gpio_set_dir_flags() if setting direction was OK.

Changes in v4:
- new in version 4

Changes in v3: None
Changes in v2: None

? drivers/gpio/gpio-uclass.c | 8 ++++----
? 1 file changed, 4 insertions(+), 4 deletions(-)

drivers/gpio/gpio-uclass.c +0 -0
index 9eeab22eef..f016532354 100644
@@ -600,6 +600,10 @@ static int _dm_gpio_set_dir_flags(struct 
 gpio_desc *desc, ulong flags)
 ????????? }
 ????? }

? +??? /* save the flags also in descriptor */
+??? if (!ret)
+??????? desc->flags = flags;
+
????? return ret;
? }
? @@ -615,10 +619,6 @@ int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags)

Quoted 8 lines

????? flags |= desc->flags;
????? ret = _dm_gpio_set_dir_flags(desc, flags);
? -??? /* update the descriptor flags */
-??? if (ret)
-??????? desc->flags = flags;
-
????? return ret;
? }

Regards,

Walter

#5 lore raw

PATCH v6 1/3 gpio-uclass.c: save the GPIOD flags also in the gpio descriptor

In reply to Heiko Schocher
Quoted 7 lines · Heiko Schocher

save the GPIOD_ flags also in the gpio descriptor.

Fixes 788ea834124b ("gpio: add function _dm_gpio_set_dir_flags")

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200705/aab9978b/attachment.sig>
#6 lore raw

PATCH v6 2/3 sandbox, test: add test for GPIO_HOG function

In reply to Heiko Schocher

currently gpio hog function is not tested with "ut dm gpio" so add some basic tests for gpio hog functionality.

For this enable GPIO_HOG in sandbox_defconfig, add in DTS some gpio hog entries, and add testcase in "ut dm gpio" command.

---

Changes in v6: None
Changes in v5:
- add Reviewed-by tag from Simon

Changes in v4:
- rebased to current master ac14bc4169

Changes in v3: None
Changes in v2:
- add basic gpio hog test functions

 arch/sandbox/dts/test.dts          | 20 ++++++++++++++++++++
 configs/sandbox64_defconfig        |  1 +
 configs/sandbox_defconfig          |  1 +
 configs/sandbox_flattree_defconfig |  1 +
 configs/sandbox_spl_defconfig      |  1 +
 test/dm/gpio.c                     | 23 +++++++++++++++++++++++
 6 files changed, 47 insertions(+)
arch/sandbox/dts/test.dts +20 -0
index 5ce5e28476..24bb3ce36f 100644
@@ -343,6 +343,26 @@
 			#gpio-cells = <1>;
 			gpio-bank-name = "a";
 			sandbox,gpio-count = <20>;
+			hog_input_active_low {
+				gpio-hog;
+				input;
+				gpios = <0 GPIO_ACTIVE_LOW>;
+			};
+			hog_input_active_high {
+				gpio-hog;
+				input;
+				gpios = <1 GPIO_ACTIVE_HIGH>;
+			};
+			hog_output_low {
+				gpio-hog;
+				output-low;
+				gpios = <2 GPIO_ACTIVE_HIGH>;
+			};
+			hog_output_high {
+				gpio-hog;
+				output-high;
+				gpios = <3 GPIO_ACTIVE_HIGH>;
+			};
 		};
 
 		gpio_b: extra-gpios {
configs/sandbox64_defconfig +1 -0
index c1237ea296..39dc3dc687 100644
@@ -98,6 +98,7 @@ CONFIG_DM_DEMO_SIMPLE=y
 CONFIG_DM_DEMO_SHAPE=y
 CONFIG_BOARD=y
 CONFIG_BOARD_SANDBOX=y
+CONFIG_GPIO_HOG=y
 CONFIG_PM8916_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
configs/sandbox_defconfig +1 -0
index 9445d78118..9015458070 100644
@@ -115,6 +115,7 @@ CONFIG_BOARD_SANDBOX=y
 CONFIG_DMA=y
 CONFIG_DMA_CHANNELS=y
 CONFIG_SANDBOX_DMA=y
+CONFIG_GPIO_HOG=y
 CONFIG_PM8916_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_DM_HWSPINLOCK=y
configs/sandbox_flattree_defconfig +1 -0
index a4a7ae8379..b5a85e1278 100644
@@ -83,6 +83,7 @@ CONFIG_DM_DEMO_SIMPLE=y
 CONFIG_DM_DEMO_SHAPE=y
 CONFIG_BOARD=y
 CONFIG_BOARD_SANDBOX=y
+CONFIG_GPIO_HOG=y
 CONFIG_PM8916_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
configs/sandbox_spl_defconfig +1 -0
index 945fe54d20..7341fa3221 100644
@@ -102,6 +102,7 @@ CONFIG_DM_DEMO_SHAPE=y
 CONFIG_BOARD=y
 CONFIG_BOARD_SANDBOX=y
 CONFIG_SPL_FIRMWARE=y
+CONFIG_GPIO_HOG=y
 CONFIG_PM8916_GPIO=y
 CONFIG_SANDBOX_GPIO=y
 CONFIG_I2C_CROS_EC_TUNNEL=y
test/dm/gpio.c +23 -0
index b5ee4e4f87..ecba566983 100644
@@ -20,6 +20,7 @@ static int dm_test_gpio(struct unit_test_state *uts)
 	unsigned int offset, gpio;
 	struct dm_gpio_ops *ops;
 	struct udevice *dev;
+	struct gpio_desc *desc;
 	const char *name;
 	int offset_count;
 	char buf[80];
@@ -109,6 +110,28 @@ static int dm_test_gpio(struct unit_test_state *uts)
 	ut_asserteq_str("a", name);
 	ut_asserteq(20, offset_count);
 
+	/* add gpio hog tests */
+	ut_assertok(gpio_hog_lookup_name("hog_input_active_low", &desc));
+	ut_asserteq(GPIOD_IS_IN | GPIOD_ACTIVE_LOW, desc->flags);
+	ut_asserteq(0, desc->offset);
+	ut_asserteq(1, dm_gpio_get_value(desc));
+	ut_assertok(gpio_hog_lookup_name("hog_input_active_high", &desc));
+	ut_asserteq(GPIOD_IS_IN, desc->flags);
+	ut_asserteq(1, desc->offset);
+	ut_asserteq(0, dm_gpio_get_value(desc));
+	ut_assertok(gpio_hog_lookup_name("hog_output_low", &desc));
+	ut_asserteq(GPIOD_IS_OUT, desc->flags);
+	ut_asserteq(2, desc->offset);
+	ut_asserteq(0, dm_gpio_get_value(desc));
+	ut_assertok(dm_gpio_set_value(desc, 1));
+	ut_asserteq(1, dm_gpio_get_value(desc));
+	ut_assertok(gpio_hog_lookup_name("hog_output_high", &desc));
+	ut_asserteq(GPIOD_IS_OUT, desc->flags);
+	ut_asserteq(3, desc->offset);
+	ut_asserteq(1, dm_gpio_get_value(desc));
+	ut_assertok(dm_gpio_set_value(desc, 0));
+	ut_asserteq(0, dm_gpio_get_value(desc));
+
 	return 0;
 }
 DM_TEST(dm_test_gpio, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
Signature · 1 line
2.24.1
#7 lore raw

PATCH v6 2/3 sandbox, test: add test for GPIO_HOG function

Quoted 9 lines · Heiko Schocher

currently gpio hog function is not tested with "ut dm gpio" so add some basic tests for gpio hog functionality.

For this enable GPIO_HOG in sandbox_defconfig, add in DTS some gpio hog entries, and add testcase in "ut dm gpio" command.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200705/35c58518/attachment.sig>
#8 lore raw

PATCH v6 3/3 gpio: search for gpio label if gpio is not found through bank name

In reply to Heiko Schocher

dm_gpio_lookup_name() searches for a gpio through the bank name. But we have also gpio labels, and it makes sense to search for a gpio also in the labels we have defined, if no gpio is found through the bank name definition.

This is useful for example if you have a wp pin on different gpios on different board versions.

If dm_gpio_lookup_name() searches also for the gpio labels, you can give the gpio an unique label name and search for this label, and do not need to differ between board revisions.

---

Example on the aristainetos board:

=> gpio clear wp_spi_nor.gpio-hog
gpio: pin wp_spi_nor.gpio-hog (gpio 47) value is 0 =>

before this patch, you need to know where your
pin is:

=> gpio clear GPIO2_15
gpio: pin GPIO2_15 (gpio 47) value is 0
=>

travis build:

Changes in v6:
- add Reviewed-by tag from Simon
- add additional comments from Simon:
- remove "default n" in Kconfig for SPL_DM_GPIO_LOOKUP_LABEL
- type of function in same line as the function
- add negativ test, where label is not found

Changes in v5: None
Changes in v4:
- rebased to current master ac14bc4169

Changes in v3:
- add comment from Simon Glass
make this new function configurable through Kconfig option DM_GPIO_LOOKUP_LABEL

Changes in v2:
- add comment from Simon Glass
move code into seperate function dm_gpio_lookup_label() add test if dm_gpio_lookup_label() works

 drivers/gpio/Kconfig       | 21 +++++++++++++++++
 drivers/gpio/gpio-uclass.c | 46 ++++++++++++++++++++++++++++++++++++++
 test/dm/gpio.c             |  9 ++++++++
 3 files changed, 76 insertions(+)
drivers/gpio/Kconfig +21 -0
index d87f6cc105..829c68eda1 100644
@@ -46,6 +46,27 @@ config GPIO_HOG
 	  is a mechanism providing automatic GPIO request and config-
 	  uration as part of the gpio-controller's driver probe function.
 
+config DM_GPIO_LOOKUP_LABEL
+	bool "Enable searching for gpio labelnames"
+	depends on DM_GPIO
+	default y
+	help
+	  This option enables searching for gpio names in
+	  the defined gpio labels, if the search for the
+	  gpio bank name failed. This makes sense if you use
+	  different gpios on different hardware versions
+	  for the same functionality in board code.
+
+config SPL_DM_GPIO_LOOKUP_LABEL
+	bool "Enable searching for gpio labelnames"
+	depends on DM_GPIO && SPL_DM && SPL_GPIO_SUPPORT
+	help
+	  This option enables searching for gpio names in
+	  the defined gpio labels, if the search for the
+	  gpio bank name failed. This makes sense if you use
+	  different gpios on different hardware versions
+	  for the same functionality in board code.
+
 config ALTERA_PIO
 	bool "Altera PIO driver"
 	depends on DM_GPIO
drivers/gpio/gpio-uclass.c +46 -0

58 lines not on this page · raw message

test/dm/gpio.c +9 -0
index ecba566983..fcee1fe598 100644
@@ -132,6 +132,15 @@ static int dm_test_gpio(struct unit_test_state *uts)
 	ut_assertok(dm_gpio_set_value(desc, 0));
 	ut_asserteq(0, dm_gpio_get_value(desc));
 
+	/* Check if lookup for labels work */
+	ut_assertok(gpio_lookup_name("hog_input_active_low", &dev, &offset,
+				     &gpio));
+	ut_asserteq_str(dev->name, "base-gpios");
+	ut_asserteq(0, offset);
+	ut_asserteq(CONFIG_SANDBOX_GPIO_COUNT + 0, gpio);
+	ut_assert(gpio_lookup_name("hog_not_exist", &dev, &offset,
+				   &gpio));
+
 	return 0;
 }
 DM_TEST(dm_test_gpio, DM_TESTF_SCAN_PDATA | DM_TESTF_SCAN_FDT);
Signature · 1 line
2.24.1
#9 lore raw

PATCH v6 3/3 gpio: search for gpio label if gpio is not found through bank name

Quoted 9 lines · Heiko Schocher

dm_gpio_lookup_name() searches for a gpio through the bank name. But we have also gpio labels, and it makes sense to search for a gpio also in the labels we have defined, if no gpio is found through the bank name definition.

This is useful for example if you have a wp pin on different gpios on different board versions.

Quoted 7 lines

If dm_gpio_lookup_name() searches also for the gpio labels, you can give the gpio an unique label name and search for this label, and do not need to differ between board revisions.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 659 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200707/5fa1f5d1/attachment.sig>
#10 lore raw

PATCH v6 3/3 gpio: search for gpio label if gpio is not found through bank name

In reply to Heiko Schocher

Hi Heiko,

p? 22. 5. 2020 v 11:10 odes?latel Heiko Schocher <[email protected]> napsal:

Quoted 25 lines

dm_gpio_lookup_name() searches for a gpio through the bank name. But we have also gpio labels, and it makes sense to search for a gpio also in the labels we have defined, if no gpio is found through the bank name definition.

This is useful for example if you have a wp pin on different gpios on different board versions.

If dm_gpio_lookup_name() searches also for the gpio labels, you can give the gpio an unique label name and search for this label, and do not need to differ between board revisions.

---

Example on the aristainetos board:

=> gpio clear wp_spi_nor.gpio-hog
gpio: pin wp_spi_nor.gpio-hog (gpio 47) value is 0 =>

Quoted 6 lines

before this patch, you need to know where your
pin is:

=> gpio clear GPIO2_15
gpio: pin GPIO2_15 (gpio 47) value is 0
=>

I spotted this patch and I am curious if you have thought about also supporting gpio-line-names.

Thanks,
Michal

#11 lore raw

PATCH v6 3/3 gpio: search for gpio label if gpio is not found through bank name

Hi Michal,

Am 20.07.2020 um 10:30 schrieb Michal Simek:

Quoted 31 lines

Hi Heiko,

p? 22. 5. 2020 v 11:10 odes?latel Heiko Schocher <[email protected]> napsal:

Quoted 28 lines

dm_gpio_lookup_name() searches for a gpio through the bank name. But we have also gpio labels, and it makes sense to search for a gpio also in the labels we have defined, if no gpio is found through the bank name definition.

This is useful for example if you have a wp pin on different gpios on different board versions.

If dm_gpio_lookup_name() searches also for the gpio labels, you can give the gpio an unique label name and search for this label, and do not need to differ between board revisions.

---

Example on the aristainetos board:

=> gpio clear wp_spi_nor.gpio-hog
gpio: pin wp_spi_nor.gpio-hog (gpio 47) value is 0 =>

before this patch, you need to know where your
pin is:

Quoted 6 lines
Quoted 3 lines

=> gpio clear GPIO2_15
gpio: pin GPIO2_15 (gpio 47) value is 0
=>

I spotted this patch and I am curious if you have thought about also supporting gpio-line-names.

Yes, that would be a good extension!

searching for "gpio-line-names" in u-boot source shows only an entry in

./doc/device-tree-bindings/gpio/gpio.txt

and some DTS files in arch/arm

but no driver code, which handles the property, so there is some work to do.

Currently I have no project (and time) to give this a chance...

But if the code, which handle "gpio-line-names" saves the name in "struct gpio_dev_priv name", DM_GPIO_LOOKUP_LABEL based code should work with it.

bye,
Heiko

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-52   Fax: +49-8142-66989-80   Email: hs at denx.de
#12 lore raw

PATCH v6 3/3 gpio: search for gpio label if gpio is not found through bank name

Quoted 49 lines · Heiko Schocher

Hi Michal,

Am 20.07.2020 um 10:30 schrieb Michal Simek:

Quoted 31 lines

Hi Heiko,

p? 22. 5. 2020 v 11:10 odes?latel Heiko Schocher <[email protected]> napsal:

Quoted 28 lines

dm_gpio_lookup_name() searches for a gpio through the bank name. But we have also gpio labels, and it makes sense to search for a gpio also in the labels we have defined, if no gpio is found through the bank name definition.

This is useful for example if you have a wp pin on different gpios on different board versions.

If dm_gpio_lookup_name() searches also for the gpio labels, you can give the gpio an unique label name and search for this label, and do not need to differ between board revisions.

---

Example on the aristainetos board:

=> gpio clear wp_spi_nor.gpio-hog
gpio: pin wp_spi_nor.gpio-hog (gpio 47) value is 0 =>

before this patch, you need to know where your
pin is:

Quoted 6 lines
Quoted 3 lines

=> gpio clear GPIO2_15
gpio: pin GPIO2_15 (gpio 47) value is 0
=>

I spotted this patch and I am curious if you have thought about also supporting gpio-line-names.

Yes, that would be a good extension!

searching for "gpio-line-names" in u-boot source shows only an entry in

./doc/device-tree-bindings/gpio/gpio.txt

and some DTS files in arch/arm

Quoted 8 lines

but no driver code, which handles the property, so there is some work to do.

Currently I have no project (and time) to give this a chance...

But if the code, which handle "gpio-line-names" saves the name in "struct gpio_dev_priv name", DM_GPIO_LOOKUP_LABEL based code should work with it.

I have sent a patch for it. Please take a look.

Thanks,
Michal