Skip to contentSkip to conversation

LynxOS is no longer supported

PATCH In review Thomas Huth 3 participants 4 messages Nov 13, 2021 – Jan 13, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 LynxOS is no longer supported

LynxOS needed the do_bootm_lynxkdi() function that got removed in 7e713067ee ("Remove LYNX KDI remainders") - and that function needed a lynxkdi_boot() function, where the last implementation had been removed in 98f705c9ce ("powerpc: remove 4xx support") already. Looks like this OS is definitely not supported anymore, so remove it from the corresponding lists.

---
 README       | 3 +--
 boot/image.c | 3 ---
 2 files changed, 1 insertion(+), 5 deletions(-)
README +1 -2
index 9606a8b3ac..064e781d45 100644
@@ -3359,8 +3359,7 @@ details; basically, the header defines the following image properties:
 * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
   4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
   LynxOS, pSOS, QNX, RTEMS, INTEGRITY;
-  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
-  INTEGRITY).
+  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, INTEGRITY).
 * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
   IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
   Currently supported: ARM, Intel x86, MIPS, NDS32, Nios II, PowerPC).
boot/image.c +0 -3
index 992e72991d..6ab827b2d4 100644
@@ -106,9 +106,6 @@ static const table_entry_t uimage_os[] = {
 	{	IH_OS_INVALID,	"invalid",	"Invalid OS",		},
 	{       IH_OS_ARM_TRUSTED_FIRMWARE, "arm-trusted-firmware", "ARM Trusted Firmware"  },
 	{	IH_OS_LINUX,	"linux",	"Linux",		},
-#if defined(USE_HOSTCC)
-	{	IH_OS_LYNXOS,	"lynxos",	"LynxOS",		},
-#endif
 	{	IH_OS_NETBSD,	"netbsd",	"NetBSD",		},
 	{	IH_OS_OSE,	"ose",		"Enea OSE",		},
 	{	IH_OS_PLAN9,	"plan9",	"Plan 9",		},
Signature · 1 line
2.27.0
Reviewed-by on v1 1/1
#1 lore raw
Quoted 8 lines · Thomas Huth

LynxOS needed the do_bootm_lynxkdi() function that got removed in 7e713067ee ("Remove LYNX KDI remainders") - and that function needed a lynxkdi_boot() function, where the last implementation had been removed in 98f705c9ce ("powerpc: remove 4xx support") already. Looks like this OS is definitely not supported anymore, so remove it from the corresponding lists.

Thanks,
Stefan

Quoted 25 lines
---
  README       | 3 +--
  boot/image.c | 3 ---
  2 files changed, 1 insertion(+), 5 deletions(-)
README +1 -2
index 9606a8b3ac..064e781d45 100644
@@ -3359,8 +3359,7 @@ details; basically, the header defines the following image properties:
  * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
    4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
    LynxOS, pSOS, QNX, RTEMS, INTEGRITY;
-  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
-  INTEGRITY).
+  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, INTEGRITY).
  * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
    IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
    Currently supported: ARM, Intel x86, MIPS, NDS32, Nios II, PowerPC).
boot/image.c +0 -0
index 992e72991d..6ab827b2d4 100644

boot/image.c static const table_entry_t uimage_os[] = { · line 111

Quoted 9 lines
boot/image.c +0 -3
@@ -106,9 +106,6 @@ static const table_entry_t uimage_os[] = {
  	{	IH_OS_INVALID,	"invalid",	"Invalid OS",		},
  	{       IH_OS_ARM_TRUSTED_FIRMWARE, "arm-trusted-firmware", "ARM Trusted Firmware"  },
  	{	IH_OS_LINUX,	"linux",	"Linux",		},
-#if defined(USE_HOSTCC)
-	{	IH_OS_LYNXOS,	"lynxos",	"LynxOS",		},
-#endif
  	{	IH_OS_NETBSD,	"netbsd",	"NetBSD",		},
  	{	IH_OS_OSE,	"ose",		"Enea OSE",		},
  	{	IH_OS_PLAN9,	"plan9",	"Plan 9",		},

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
#2 lore raw
In reply to Thomas Huth
Quoted 32 lines · Thomas Huth

LynxOS needed the do_bootm_lynxkdi() function that got removed in 7e713067ee ("Remove LYNX KDI remainders") - and that function needed a lynxkdi_boot() function, where the last implementation had been removed in 98f705c9ce ("powerpc: remove 4xx support") already. Looks like this OS is definitely not supported anymore, so remove it from the corresponding lists.

---
  README       | 3 +--
  boot/image.c | 3 ---
  2 files changed, 1 insertion(+), 5 deletions(-)
README +1 -2
index 9606a8b3ac..064e781d45 100644
@@ -3359,8 +3359,7 @@ details; basically, the header defines the following image properties:
  * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD,
    4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
    LynxOS, pSOS, QNX, RTEMS, INTEGRITY;
-  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
-  INTEGRITY).
+  Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, INTEGRITY).
  * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
    IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
    Currently supported: ARM, Intel x86, MIPS, NDS32, Nios II, PowerPC).
boot/image.c +0 -0
index 992e72991d..6ab827b2d4 100644

boot/image.c static const table_entry_t uimage_os[] = { · line 111

Quoted 9 lines
boot/image.c +0 -3
@@ -106,9 +106,6 @@ static const table_entry_t uimage_os[] = {
  	{	IH_OS_INVALID,	"invalid",	"Invalid OS",		},
  	{       IH_OS_ARM_TRUSTED_FIRMWARE, "arm-trusted-firmware", "ARM Trusted Firmware"  },
  	{	IH_OS_LINUX,	"linux",	"Linux",		},
-#if defined(USE_HOSTCC)
-	{	IH_OS_LYNXOS,	"lynxos",	"LynxOS",		},
-#endif
  	{	IH_OS_NETBSD,	"netbsd",	"NetBSD",		},
  	{	IH_OS_OSE,	"ose",		"Enea OSE",		},
  	{	IH_OS_PLAN9,	"plan9",	"Plan 9",		},

Friendly ping!

Could someone pick this patch up? Thanks!

Happy new year,
Thomas

#3 lore raw
In reply to Thomas Huth
Quoted 9 lines · Thomas Huth

LynxOS needed the do_bootm_lynxkdi() function that got removed in 7e713067ee ("Remove LYNX KDI remainders") - and that function needed a lynxkdi_boot() function, where the last implementation had been removed in 98f705c9ce ("powerpc: remove 4xx support") already. Looks like this OS is definitely not supported anymore, so remove it from the corresponding lists.

Applied to u-boot/master, thanks!

Signature · 1 line
Tom