LynxOS is no longer supported
PATCH 1/1 LynxOS is no longer supported
LynxOS needed the do_bootm_lynxkdi() function that got removed in 7e713067ee ("Remove LYNX KDI remainders") - and that function needed a lynxkdi_boot() function, where the last implementation had been removed in 98f705c9ce ("powerpc: remove 4xx support") already. Looks like this OS is definitely not supported anymore, so remove it from the corresponding lists.
--- README | 3 +-- boot/image.c | 3 --- 2 files changed, 1 insertion(+), 5 deletions(-)
README +1 -2
@@ -3359,8 +3359,7 @@ details; basically, the header defines the following image properties: * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, LynxOS, pSOS, QNX, RTEMS, INTEGRITY; - Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, - INTEGRITY). + Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, INTEGRITY). * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86, IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; Currently supported: ARM, Intel x86, MIPS, NDS32, Nios II, PowerPC).
boot/image.c +0 -3
@@ -106,9 +106,6 @@ static const table_entry_t uimage_os[] = { { IH_OS_INVALID, "invalid", "Invalid OS", }, { IH_OS_ARM_TRUSTED_FIRMWARE, "arm-trusted-firmware", "ARM Trusted Firmware" }, { IH_OS_LINUX, "linux", "Linux", }, -#if defined(USE_HOSTCC) - { IH_OS_LYNXOS, "lynxos", "LynxOS", }, -#endif { IH_OS_NETBSD, "netbsd", "NetBSD", }, { IH_OS_OSE, "ose", "Enea OSE", }, { IH_OS_PLAN9, "plan9", "Plan 9", },
Signature · 1 line
2.27.0
Quoted 8 lines · Thomas Huth
LynxOS needed the
do_bootm_lynxkdi()function that got removed in7e713067ee("Remove LYNX KDI remainders") - and that function needed alynxkdi_boot()function, where the last implementation had been removed in98f705c9ce("powerpc: remove 4xx support") already. Looks like this OS is definitely not supported anymore, so remove it from the corresponding lists.Signed-off-by Thomas Huth <[email protected]>
Thanks,
Stefan
Quoted 25 lines
--- README | 3 +-- boot/image.c | 3 --- 2 files changed, 1 insertion(+), 5 deletions(-)README +1
-2@@ -3359,8 +3359,7 @@ details; basically, the header defines the following image properties: * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, LynxOS, pSOS, QNX, RTEMS, INTEGRITY; - Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, - INTEGRITY). + Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, INTEGRITY). * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86, IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; Currently supported: ARM, Intel x86, MIPS, NDS32, Nios II, PowerPC).boot/image.c +0
-0
boot/image.c static const table_entry_t uimage_os[] = { · line 111
Quoted 9 lines
boot/image.c +0
-3@@ -106,9 +106,6 @@ static const table_entry_t uimage_os[] = { { IH_OS_INVALID, "invalid", "Invalid OS", }, { IH_OS_ARM_TRUSTED_FIRMWARE, "arm-trusted-firmware", "ARM Trusted Firmware" }, { IH_OS_LINUX, "linux", "Linux", }, -#if defined(USE_HOSTCC) - { IH_OS_LYNXOS, "lynxos", "LynxOS", }, -#endif { IH_OS_NETBSD, "netbsd", "NetBSD", }, { IH_OS_OSE, "ose", "Enea OSE", }, { IH_OS_PLAN9, "plan9", "Plan 9", },
Viele Grüße,
Stefan Roese
Signature · 3 lines
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
Quoted 32 lines · Thomas Huth
LynxOS needed the
do_bootm_lynxkdi()function that got removed in7e713067ee("Remove LYNX KDI remainders") - and that function needed alynxkdi_boot()function, where the last implementation had been removed in98f705c9ce("powerpc: remove 4xx support") already. Looks like this OS is definitely not supported anymore, so remove it from the corresponding lists.Signed-off-by Thomas Huth <[email protected]>--- README | 3 +-- boot/image.c | 3 --- 2 files changed, 1 insertion(+), 5 deletions(-)README +1
-2@@ -3359,8 +3359,7 @@ details; basically, the header defines the following image properties: * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, LynxOS, pSOS, QNX, RTEMS, INTEGRITY; - Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS, - INTEGRITY). + Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, INTEGRITY). * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86, IA64, MIPS, NDS32, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; Currently supported: ARM, Intel x86, MIPS, NDS32, Nios II, PowerPC).boot/image.c +0
-0
boot/image.c static const table_entry_t uimage_os[] = { · line 111
Quoted 9 lines
boot/image.c +0
-3@@ -106,9 +106,6 @@ static const table_entry_t uimage_os[] = { { IH_OS_INVALID, "invalid", "Invalid OS", }, { IH_OS_ARM_TRUSTED_FIRMWARE, "arm-trusted-firmware", "ARM Trusted Firmware" }, { IH_OS_LINUX, "linux", "Linux", }, -#if defined(USE_HOSTCC) - { IH_OS_LYNXOS, "lynxos", "LynxOS", }, -#endif { IH_OS_NETBSD, "netbsd", "NetBSD", }, { IH_OS_OSE, "ose", "Enea OSE", }, { IH_OS_PLAN9, "plan9", "Plan 9", },
Friendly ping!
Could someone pick this patch up? Thanks!
Happy new year,
Thomas
Quoted 9 lines · Thomas Huth
LynxOS needed the
do_bootm_lynxkdi()function that got removed in7e713067ee("Remove LYNX KDI remainders") - and that function needed alynxkdi_boot()function, where the last implementation had been removed in98f705c9ce("powerpc: remove 4xx support") already. Looks like this OS is definitely not supported anymore, so remove it from the corresponding lists.Signed-off-by Thomas Huth <[email protected]>Reviewed-by Stefan Roese <[email protected]>
Applied to u-boot/master, thanks!
Signature · 1 line
Tom